/**
* @brief Print main menu to terminal program
*/
static void print_main_menu(void)
{
printf("\n");
print_app_header();
printf("\r\n");
print_node_status();
printf("\r\n");
printf("(R) : Reset (step 1) - Cold start\r\n");
printf("(S) : Start (step 2)\r\n");
printf("(P) : Push button pairing (step 3)\r\n");
printf("(A) : All-in-one start (Reset, start, pairing)\r\n");
printf("(W) : Warm start - reset(0)\r\n");
printf("(T) : Print pairing table\r\n");
printf("(U) : Unpair\r\n");
printf("(C) : Channel agility (periodic mode) - enable/disable\r\n");
printf("(O) : Channel agility configuration\r\n");
printf("(B) : Base channel change\r\n");
printf("(Y) : Power save mode - enable/disable\r\n");
printf("(D) : Send remote battery status request\r\n");
printf("(V) : Send remote firmware version request\r\n");
printf("(Z) : Send alive request\r\n");
printf(">\r\n");
}
int main()
{
struct netif *netif, server_netif;
struct ip_addr ipaddr, netmask, gw;
/* the mac address of the board. this should be unique per board */
unsigned char mac_ethernet_address[] = { 0x00, 0x0a, 0x35, 0x00, 0x01, 0x02 };
netif = &server_netif;
init_platform();
/* initliaze IP addresses to be used */
IP4_ADDR(&ipaddr, 192, 168, 1, 10);
IP4_ADDR(&netmask, 255, 255, 255, 0);
IP4_ADDR(&gw, 192, 168, 1, 1);
print_app_header();
print_ip_settings(&ipaddr, &netmask, &gw);
lwip_init();
/* Add network interface to the netif_list, and set it as default */
if (!xemac_add(netif, &ipaddr, &netmask, &gw, mac_ethernet_address, PLATFORM_EMAC_BASEADDR)) {
xil_printf("Error adding N/W interface\n\r");
return -1;
}
netif_set_default(netif);
/* Create a new DHCP client for this interface.
* Note: you must call dhcp_fine_tmr() and dhcp_coarse_tmr() at
* the predefined regular intervals after starting the client.
*/
/* dhcp_start(netif); */
/* now enable interrupts */
platform_enable_interrupts();
/* specify that the network if is up */
netif_set_up(netif);
/* start the application (web server, rxtest, txtest, etc..) */
start_application();
/* receive and process packets */
while (1) {
xemacif_input(netif);
transfer_data();
}
/* never reached */
cleanup_platform();
return 0;
}
int main()
{
struct ip_addr ipaddr, netmask, gw;
/* the mac address of the board. this should be unique per board */
unsigned char mac_ethernet_address[] =
{ 0x00, 0x0a, 0x35, 0x00, 0x01, 0x02 };
echo_netif = &server_netif;
#if defined (__arm__) && !defined (ARMR5)
#if XPAR_GIGE_PCS_PMA_SGMII_CORE_PRESENT == 1 || XPAR_GIGE_PCS_PMA_1000BASEX_CORE_PRESENT == 1
ProgramSi5324();
ProgramSfpPhy();
#endif
#endif
init_platform();
#if LWIP_DHCP==1
ipaddr.addr = 0;
gw.addr = 0;
netmask.addr = 0;
#else
/* initliaze IP addresses to be used */
IP4_ADDR(&ipaddr, 192, 168, 1, 10);
IP4_ADDR(&netmask, 255, 255, 255, 0);
IP4_ADDR(&gw, 192, 168, 1, 1);
#endif
print_app_header();
lwip_init();
/* Add network interface to the netif_list, and set it as default */
if (!xemac_add(echo_netif, &ipaddr, &netmask,
&gw, mac_ethernet_address,
PLATFORM_EMAC_BASEADDR)) {
xil_printf("Error adding N/W interface\n\r");
return -1;
}
netif_set_default(echo_netif);
/* now enable interrupts */
platform_enable_interrupts();
/* specify that the network if is up */
netif_set_up(echo_netif);
#if (LWIP_DHCP==1)
/* Create a new DHCP client for this interface.
* Note: you must call dhcp_fine_tmr() and dhcp_coarse_tmr() at
* the predefined regular intervals after starting the client.
*/
dhcp_start(echo_netif);
dhcp_timoutcntr = 24;
while(((echo_netif->ip_addr.addr) == 0) && (dhcp_timoutcntr > 0))
xemacif_input(echo_netif);
if (dhcp_timoutcntr <= 0) {
if ((echo_netif->ip_addr.addr) == 0) {
xil_printf("DHCP Timeout\r\n");
xil_printf("Configuring default IP of 192.168.1.10\r\n");
IP4_ADDR(&(echo_netif->ip_addr), 192, 168, 1, 10);
IP4_ADDR(&(echo_netif->netmask), 255, 255, 255, 0);
IP4_ADDR(&(echo_netif->gw), 192, 168, 1, 1);
}
}
ipaddr.addr = echo_netif->ip_addr.addr;
gw.addr = echo_netif->gw.addr;
netmask.addr = echo_netif->netmask.addr;
#endif
print_ip_settings(&ipaddr, &netmask, &gw);
/* start the application (web server, rxtest, txtest, etc..) */
start_application();
/* receive and process packets */
while (1) {
if (TcpFastTmrFlag) {
tcp_fasttmr();
TcpFastTmrFlag = 0;
}
if (TcpSlowTmrFlag) {
tcp_slowtmr();
TcpSlowTmrFlag = 0;
}
xemacif_input(echo_netif);
transfer_data();
}
/* never reached */
cleanup_platform();
return 0;
}
int main()
{
struct ip_addr ipaddr, netmask, gw;
unsigned FPGA_port_number;
char *FPGA_ip_address;
char *FPGA_netmask;
char *FPGA_gateway;
unsigned integer_ip;
unsigned int FPGA_ip_address_a1,FPGA_ip_address_a2,FPGA_ip_address_a3,FPGA_ip_address_a4;
unsigned int FPGA_netmask_a1,FPGA_netmask_a2,FPGA_netmask_a3,FPGA_netmask_a4;
unsigned int FPGA_gateway_a1,FPGA_gateway_a2,FPGA_gateway_a3,FPGA_gateway_a4;
//EXAMPLE: set FPGA IP and port number
FPGA_ip_address=FPGA_IP;
FPGA_netmask=FPGA_NM;
FPGA_gateway=FPGA_GW;
FPGA_port_number=FPGA_PORT;
//extract FPGA IP address from string
if (ip_to_int (FPGA_ip_address,&FPGA_ip_address_a1,&FPGA_ip_address_a2,&FPGA_ip_address_a3,&FPGA_ip_address_a4) == INVALID) {
printf ("'%s' is not a valid IP address for FPGA server.\n", FPGA_ip_address);
return 1;
}
//extract FPGA netmask address from string
if (ip_to_int (FPGA_netmask,&FPGA_netmask_a1,&FPGA_netmask_a2,&FPGA_netmask_a3,&FPGA_netmask_a4) == INVALID) {
printf ("'%s' is not a valid netmask address for FPGA server.\n", FPGA_netmask);
return 1;
}
//extract FPGA gateway address from string
if (ip_to_int (FPGA_gateway,&FPGA_gateway_a1,&FPGA_gateway_a2,&FPGA_gateway_a3,&FPGA_gateway_a4) == INVALID) {
printf ("'%s' is not a valid gateway address for FPGA server.\n", FPGA_gateway);
return 1;
}
/* the mac address of the board. this should be unique per board */
unsigned char mac_ethernet_address[] =
{ 0x00, 0x0a, 0x35, 0x00, 0x01, 0x02 };
echo_netif = &server_netif;
init_platform();
Xil_DCacheDisable();
/* initliaze IP addresses to be used */
IP4_ADDR(&ipaddr, FPGA_ip_address_a4, FPGA_ip_address_a3, FPGA_ip_address_a2, FPGA_ip_address_a1);
IP4_ADDR(&netmask, FPGA_netmask_a4, FPGA_netmask_a3, FPGA_netmask_a2, FPGA_netmask_a1);
IP4_ADDR(&gw, FPGA_gateway_a4, FPGA_gateway_a3, FPGA_gateway_a2, FPGA_gateway_a1);
print_app_header();
print_ip_settings(&ipaddr, &netmask, &gw);
lwip_init();
/* Add network interface to the netif_list, and set it as default */
if (!xemac_add(echo_netif, &ipaddr, &netmask,&gw, mac_ethernet_address,PLATFORM_EMAC_BASEADDR)) {
xil_printf("Error adding N/W interface\n\r");
return -1;
}
netif_set_default(echo_netif);
/* specify that the network if is up */
netif_set_up(echo_netif);
/* now enable interrupts */
platform_enable_interrupts();
/* start the application (web server, rxtest, txtest, etc..) */
start_application();
/* receive and process packets */
while (1) {
xemacif_input(echo_netif);
transfer_data();
}
/* never reached */
cleanup_platform();
return 0;
}
/******************************************************************************
* Name: main
* Description: Program entry point
*
* Returns: int - returns 0 if no errors
******************************************************************************/
int main() {
/* declare a network interface and network addresses */
struct netif *netif, server_netif;
struct ip_addr ipaddr, netmask, gw;
/* specify a unique MAC address for the board */
#ifdef XPAR_CPU_PPC440_CORE_CLOCK_FREQ_HZ /* set MAC on ML507 board */
unsigned char mac_ethernet_address[] = {0x00, 0x0a, 0x35, 0x01, 0xC9, 0x76};
#else /* set MAC on ML410 board */
unsigned char mac_ethernet_address[] = {0x00, 0x0a, 0x35, 0x01, 0x9A, 0xFE};
#endif
/* set the network interface pointer */
netif = &server_netif;
/* enable caches */
XCache_EnableICache( INSTR_CACHE );
XCache_EnableDCache( DATA_CACHE );
/* setup interrupts */
setup_interrupts();
/* initliaze network addresses to be used */
IP4_ADDR( &ipaddr, 192, 168, 1, 15 );
IP4_ADDR( &netmask, 255, 255, 255, 0 );
IP4_ADDR( &gw, 192, 168, 1, 1 );
/* print the application header and IP settings */
print_app_header();
print_ip_settings(&ipaddr, &netmask, &gw);
/* initialize lwip */
lwip_init();
/* add network interface to the netif_list, and set it as default */
if( !xemac_add( netif, &ipaddr, &netmask, &gw,
mac_ethernet_address, EMAC_BASEADDR ) ) {
xil_printf( "Error adding N/W interface\n\r" );
return -1;
}
netif_set_default( netif );
/* now enable interrupts */
enable_interrupts();
/* specify that the network if is up */
netif_set_up( netif );
/* start the application */
start_application();
/* print debug header if debug mode set */
#ifdef QMFIR_DEBUG
debug_menu();
while( 1) {
qmfir_debug();
}
#endif
/* receive and process packets */
while( 1 ) {
xemacif_input( netif );
}
/* disable caches */
XCache_DisableDCache();
XCache_DisableICache();
return 0;
} /* main */
int main()
{
// disable caches -- still fast enough for copies, no worries about coherency
Xil_DCacheDisable();
struct ip_addr ipaddr, netmask, gw;
/* the mac address of the board. this should be unique per board */
unsigned char mac_ethernet_address[] =
{ 0x00, 0x0a, 0x35, 0x00, 0x05, 0x12 };
echo_netif = &server_netif;
#if XPAR_GIGE_PCS_PMA_CORE_PRESENT == 1
ProgramSi5324();
ProgramSfpPhy();
#endif
init_platform();
/* initliaze IP addresses to be used */
/* 129.241.110.214 */
ipaddr.addr=0;
netmask.addr=0;
gw.addr=0;
/*IP4_ADDR(&ipaddr, 129, 241, 110, 240);
IP4_ADDR(&netmask, 255, 255, 254, 0);
IP4_ADDR(&gw, 129, 241, 110, 1);*/
print_app_header();
print_ip_settings(&ipaddr, &netmask, &gw);
lwip_init();
/* Add network interface to the netif_list, and set it as default */
if (!xemac_add(echo_netif, &ipaddr, &netmask,
&gw, mac_ethernet_address,
PLATFORM_EMAC_BASEADDR)) {
xil_printf("Error adding N/W interface\n\r");
return -1;
}
netif_set_default(echo_netif);
/* Create a new DHCP client for this interface.
* Note: you must call dhcp_fine_tmr() and dhcp_coarse_tmr() at
* the predefined regular intervals after starting the client.
*/
/* dhcp_start(echo_netif); */
dhcp_start(echo_netif);
/* now enable interrupts */
platform_enable_interrupts();
/* specify that the network if is up */
netif_set_up(echo_netif);
/* start the application (web server, rxtest, txtest, etc..) */
start_application();
/* receive and process packets */
int msg = 0;
while (!finished) {
xemacif_input(echo_netif);
transfer_data();
if(!msg && echo_netif->ip_addr.addr)
{
msg=1;
xil_printf("Acquired DHCP address!\n");
print_ip("",&(echo_netif->ip_addr));
}
}
xil_printf("Cheetah finished, exiting..\n");
cleanup_platform();
return 0;
}
