// samples are written to from one thread, and read from another (this one)
int fifoRead (int fifoBasePtr, int fifoPtrPtr, int fifoCheckBasePtr, int fifoCheckVal) {
int *fifoBase;
int *fifoPtr;
int readData;
int *fifoCheckBase;
int readCheckData;
fifoBase = (int *)(fifoBasePtr);
fifoPtr = (int *)(fifoPtrPtr);
fifoCheckBase = (int *)(fifoCheckBasePtr);
// Check the sample number
readCheckData = fifoCheckBase[*fifoPtr];
#if PRINT == PWM_FLOW_CHECK
if (readCheckData != fifoCheckVal)
{
printstrln("PWM Fifo Checking failure");
printstr("Expected: ");
printintln(fifoCheckVal);
printstr("Actual: ");
printintln(readCheckData);
while(1);
}
#endif
// now perform read
readData = fifoBase[*fifoPtr];
(*fifoPtr)++;
(*fifoPtr) = (*fifoPtr) & PWM_FIFO_MASK;
return (readData);
}
static int tftp_make_ack_pkt(unsigned char *tx_buf, unsigned short block_num)
{
tftp_ack_t *pkt = (tftp_ack_t*) &tx_buf[0];
pkt->opcode = hton16((unsigned short) TFTP_OPCODE_ACK);
pkt->block_number = hton16(block_num);
#if TFTP_DEBUG_PRINT
printstr("TFTP: Gen ACK, block #");
printintln(block_num);
#endif
return TFTP_MIN_PKT_SIZE;
}
static int tftp_make_error_pkt(unsigned char *tx_buf, unsigned short code, char *msg, int *error)
{
tftp_error_t *pkt = (tftp_error_t*) &tx_buf[0];
if (error != 0)
{
*error = 1;
}
// The length of the error message must always be less than TFTP_ERROR_MSG_MAX_LENGTH
assert(strlen(msg) < TFTP_ERROR_MSG_MAX_LENGTH);
pkt->opcode = hton16((unsigned short) TFTP_OPCODE_ERROR);
pkt->error_code = hton16(code);
strcpy(pkt->error_msg, msg);
#if TFTP_DEBUG_PRINT
printstr("TFTP: Gen ERROR, code ");
printintln(code);
#endif
return (TFTP_MIN_PKT_SIZE + strlen(msg) + TFTP_NULL_BYTE);
}
static void process_xscope_data(chanend c_xtcp, xscope_protocol xscope_data)
{
/* Custom protocol definition
* Start with cmd_type, send end_token as 0 as last
* Listen: 0-dc-inport-proto-dc
* Connect: 1-dc-out_port-proto-host_ipconfig
* Send: 2-1-local_port-dc-remote_addr
* Close: 2-2-local_port-dc-remote_addr
*/
#define CONTROLLER_IP {169, 254, 196, 179}
#if !defined(CONTROLLER_IP)
#warning No define of form CONTROLLER_IP
#error Rebuild the application with this define assigned to the host controller ip
#endif
xtcp_ipaddr_t ipaddr = CONTROLLER_IP;
/*ipaddr[0] = atoi(xscope_data.ip_addr_1);
ipaddr[1] = atoi(xscope_data.ip_addr_2);
ipaddr[2] = atoi(xscope_data.ip_addr_3);
ipaddr[3] = atoi(xscope_data.ip_addr_4);*/
switch (xscope_data.cmd_type) {
case XSCOPE_CMD_LISTEN: //listen; for server type conn
xtcp_listen(c_xtcp, xscope_data.port_no, xscope_data.protocol);
printstr("Listening on port: ");
printintln(xscope_data.port_no);
break;
case XSCOPE_CMD_CONNECT: //connect; for client type conn
xtcp_connect(c_xtcp, xscope_data.port_no, ipaddr, xscope_data.protocol);
printstr("Connected to host on port: ");
printintln(xscope_data.port_no);
break;
case XSCOPE_CMD_SEND: { //Send data
int conn_id;
xtcp_connection_t conn;
if (PROTO_TCP == xscope_data.protocol)
conn_id = get_tcp_conn_id(ipaddr, xscope_data.port_no);
else if (PROTO_UDP == xscope_data.protocol)
conn_id = get_udp_conn_id(ipaddr, xscope_data.port_no);
if (conn_id) {
conn.id = conn_id;
xtcp_init_send(c_xtcp, &conn);
printstr("Sending data on the connection: ");
printintln(conn_id);
}
}
break;
case XSCOPE_CMD_CLOSE: { //Close command
int conn_id;
xtcp_connection_t conn;
if (PROTO_TCP == xscope_data.protocol)
conn_id = get_tcp_conn_id(ipaddr, xscope_data.port_no);
else if (PROTO_UDP == xscope_data.protocol)
conn_id = get_udp_conn_id(ipaddr, xscope_data.port_no);
if (conn_id) {
conn.id = conn_id;
xtcp_close(c_xtcp, &conn);
printstr("Closing the connection: ");
printintln(conn_id);
}
}
break;
case XSCOPE_CMD_CTRLR_SEND: //this is a controller send command; do nothing
break;
default:
printstrln("unknown command received");
break;
}
}
int tftp_process_packet(unsigned char *tx_buf, unsigned char *rx_buf, int num_bytes, unsigned short *block_num_glob, int *error, int *complete)
{
tftp_packet_t *pkt = (tftp_packet_t*) &rx_buf[0];
u16_t opcode = ntoh16(pkt->opcode);
switch (opcode)
{
case TFTP_OPCODE_RRQ: // Read Request
{
// We don't support read requests - reply with an error packet
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_NOT_DEFINED, "Read not supported", error);
}
case TFTP_OPCODE_WRQ: // Write Request
{
char *filename;
char *mode;
filename = (char *) pkt->payload;
#if !TFTP_ACCEPT_ANY_FILENAME
// Check that the requested filename matches what we expect
if (strncmp(filename, TFTP_IMAGE_FILENAME, strlen(TFTP_IMAGE_FILENAME)) != 0)
{
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_NOT_DEFINED, "Invalid filename", error);
}
#endif
// Generate a pointer to the mode string
mode = filename + strlen(filename) + TFTP_NULL_BYTE;
// Must be a binary transfer
if (strncmp(mode, "octet", 5) != 0)
{
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_NOT_DEFINED, "Invalid transfer mode", error);
}
// ACK with data block number zero
return tftp_make_ack_pkt(tx_buf, 0);
}
case TFTP_OPCODE_DATA: // Data Packet
{
unsigned short block_num;
tftp_data_t *data_pkt = (tftp_data_t*) &rx_buf[0];
if (num_bytes < (TFTP_BLOCK_SIZE + TFTP_MIN_PKT_SIZE))
{
// last block
*complete = 1;
}
block_num = ntoh16(data_pkt->block_num);
*block_num_glob = block_num;
// Check that we've received the correct block of data and it's not a duplicate
if (block_num == (prev_block_num + 1))
{
prev_block_num = block_num;
#if TFTP_DEBUG_PRINT
printstr("TFTP: Rcvd data, block #");
printintln(block_num);
#endif
if ((block_num * TFTP_BLOCK_SIZE) >= TFTP_MAX_FILE_SIZE)
{
// We have received more data that the allowed maximum - send an error
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_DISK_FULL, "", error);
}
// Here the data is passed to the application for processing. It can signal an error to TFTP
// by returning a non-zero value.
if (tftp_app_process_data_block(data_pkt->data, num_bytes - TFTP_MIN_PKT_SIZE) != 0)
{
// We send an access violation error, but this could be modified to send a custom
// error from the application layer */
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_ACCESS_VIOLATION, "", error);
}
}
else
{
#if TFTP_DEBUG_PRINT
printstr("TFTP: Rvcd invalid data, block #");
printintln(block_num);
#endif
}
// Make the ACK packet for the received data
return tftp_make_ack_pkt(tx_buf, block_num);
}
case TFTP_OPCODE_ACK: // Acknowledgement
{
// We never expect to receive an ACK packet from the active connection
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_ILLEGAL_OPERATION, "", error);
}
case TFTP_OPCODE_ERROR: // Error packet
{
return -1;
}
default:
{
// Error: Not a valid TFTP opcode
return tftp_make_error_pkt(tx_buf, TFTP_ERROR_ILLEGAL_OPERATION, "", error);
}
}
}
