/**
* @brief Cleanup TAL
*
* @param trx_id Transceiver identifier
*/
static void cleanup_tal(trx_id_t trx_id)
{
/* Clear all running TAL timers. */
ENTER_CRITICAL_REGION();
stop_tal_timer(trx_id);
LEAVE_CRITICAL_REGION();
/* Clear TAL Incoming Frame queue and free used buffers. */
while (tal_incoming_frame_queue[trx_id].size > 0) {
buffer_t *frame
= qmm_queue_remove(
&tal_incoming_frame_queue[trx_id], NULL);
if (NULL != frame) {
bmm_buffer_free(frame);
}
}
/* Get new TAL Rx buffer if necessary */
if (tal_rx_buffer[trx_id] == NULL) {
tal_rx_buffer[trx_id] = bmm_buffer_alloc(LARGE_BUFFER_SIZE);
}
/* Handle buffer shortage */
if (tal_rx_buffer[trx_id] == NULL) {
tal_buf_shortage[trx_id] = true;
} else {
tal_buf_shortage[trx_id] = false;
}
}
bool wpan_task(void)
{
bool event_processed;
uint8_t *event = NULL;
/* mac_task returns true if a request was processed completely */
event_processed = mac_task();
/*
* MAC to NHLE event queue should be dispatched
* irrespective of the dispatcher state.
*/
event = (uint8_t *)qmm_queue_remove(&mac_nhle_q, NULL);
/* If an event has been detected, handle it. */
if (NULL != event) {
dispatch_event(event);
event_processed = true;
}
#ifdef ENABLE_RTB
rtb_task();
#endif /* ENABLE_RTB */
tal_task();
pal_task();
return (event_processed);
}
/**
* @brief Allocates a buffer
*
* This function allocates a buffer and returns a pointer to the buffer.
* The same pointer should be used while freeing the buffer.User should
* call BMM_BUFFER_POINTER(buf) to get the pointer to buffer user area.
*
* @param size size of buffer to be allocated.
*
* @return pointer to the buffer allocated,
* NULL if buffer not available.
*/
buffer_t *bmm_buffer_alloc(uint8_t size)
{
buffer_t *pfree_buffer = NULL;
#if (TOTAL_NUMBER_OF_SMALL_BUFS > 0)
/*
* Allocate buffer only if size requested is less than or equal to
* maximum
* size that can be allocated.
*/
if (size <= LARGE_BUFFER_SIZE) {
/*
* Allocate small buffer if size is less than small buffer size
* and if
* small buffer is available allocate from small buffer pool.
*/
if ((size <= SMALL_BUFFER_SIZE)) {
/* Allocate buffer from free small buffer queue */
pfree_buffer = qmm_queue_remove(&free_small_buffer_q,
NULL);
}
/*
* If size is greater than small buffer size or no free small
* buffer is
* available, allocate a buffer from large buffer pool if
* avialable
*/
if (NULL == pfree_buffer) {
/* Allocate buffer from free large buffer queue */
pfree_buffer = qmm_queue_remove(&free_large_buffer_q,
NULL);
}
}
#else /* no small buffers available at all */
/* Allocate buffer from free large buffer queue */
pfree_buffer = qmm_queue_remove(&free_large_buffer_q, NULL);
size = size; /* Keep compiler happy. */
#endif
return pfree_buffer;
}
/**
* @brief Runs the MAC scheduler
*
* This function runs the MAC scheduler.
*
* MLME and MCPS queues are removed alternately, starting with MLME queue.
*
* @return true if event is dispatched, false if no event to dispatch.
*/
bool mac_task(void)
{
uint8_t *event = NULL;
bool processed_event = false;
if (!mac_busy) {
/* Check whether queue is empty */
if (nhle_mac_q.size != 0) {
event = (uint8_t *)qmm_queue_remove(&nhle_mac_q, NULL);
/* If an event has been detected, handle it. */
if (NULL != event) {
/* Process event due to NHLE requests */
dispatch_event(event);
processed_event = true;
}
}
}
/*
* Internal event queue should be dispatched
* irrespective of the dispatcher state.
*/
/* Check whether queue is empty */
if (tal_mac_q.size != 0) {
event = (uint8_t *)qmm_queue_remove(&tal_mac_q, NULL);
/* If an event has been detected, handle it. */
if (NULL != event) {
dispatch_event(event);
processed_event = true;
}
}
return processed_event;
}
/**
* @brief Internal function for flushing a specific queue
*
* @param q Queue to be flushed
*/
void qmm_queue_flush(queue_t *q)
{
buffer_t *buf_to_free;
while (q->size > 0) {
/* Remove the buffer from the queue and free it */
buf_to_free = qmm_queue_remove(q, NULL);
if (NULL == buf_to_free) {
#if (_DEBUG_ > 0)
ABORT("Corrupted queue");
#endif
q->size = 0;
return;
}
bmm_buffer_free(buf_to_free);
}
}
/**
* @brief TAL task handling
*
* This function
* - Checks and allocates the receive buffer.
* - Processes the TAL incoming frame queue.
* - Implements the TAL state machine.
*/
void tal_task(void)
{
/* Check if the receiver needs to be switched on. */
if (tal_rx_on_required && (tal_state == TAL_IDLE))
{
/* Check if a receive buffer has not been available before. */
if (tal_rx_buffer == NULL)
{
tal_rx_buffer = bmm_buffer_alloc(LARGE_BUFFER_SIZE);
}
/* Check if buffer could be allocated */
if (NULL != tal_rx_buffer)
{
/*
* Note:
* This flag needs to be reset BEFORE the received is switched on.
*/
tal_rx_on_required = false;
#ifdef PROMISCUOUS_MODE
if (tal_pib.PromiscuousMode)
{
set_trx_state(CMD_RX_ON);
}
else
{
set_trx_state(CMD_RX_AACK_ON);
}
#else /* Normal operation */
set_trx_state(CMD_RX_AACK_ON);
#endif
}
}
else
{
/* no free buffer is available; try next time again */
}
/*
* If the transceiver has received a frame and it has been placed
* into the queue of the TAL, the frame needs to be processed further.
*/
if (tal_incoming_frame_queue.size > 0)
{
buffer_t *rx_frame;
/* Check if there are any pending data in the incoming_frame_queue. */
rx_frame = qmm_queue_remove(&tal_incoming_frame_queue, NULL);
if (NULL != rx_frame)
{
process_incoming_frame(rx_frame);
}
}
/* Handle the TAL state machines */
switch (tal_state)
{
case TAL_IDLE:
/* Do nothing, but fall through... */
case TAL_TX_AUTO:
/* Wait until state is changed to TAL_TX_DONE inside tx end ISR */
break;
case TAL_TX_DONE:
tx_done_handling(); // see tal_tx.c
break;
#ifdef BEACON_SUPPORT
case TAL_SLOTTED_CSMA:
slotted_csma_state_handling(); // see tal_slotted_csma.c
break;
#endif /* BEACON_SUPPORT */
#if (MAC_SCAN_ED_REQUEST_CONFIRM == 1)
case TAL_ED_RUNNING:
/* Do nothing here. Wait until ED is completed. */
break;
case TAL_ED_DONE:
ed_scan_done();
break;
#endif /* (MAC_SCAN_ED_REQUEST_CONFIRM == 1) */
default:
ASSERT("tal_state is not handled" == 0);
break;
}
} /* tal_task() */
/**
* @brief Resets TAL state machine and sets the default PIB values if requested
*
* @param set_default_pib Defines whether PIB values need to be set
* to its default values
*
* @return MAC_SUCCESS if the transceiver state is changed to TRX_OFF
* FAILURE otherwise
*/
retval_t tal_reset(bool set_default_pib)
{
/*
* Do the reset stuff.
* Set the default PIBs depending on the given parameter set_default_pib.
* Do NOT generate random seed again.
*/
if (internal_tal_reset(set_default_pib) != MAC_SUCCESS)
{
return FAILURE;
}
#if (NUMBER_OF_TAL_TIMERS > 0)
/* Clear all running TAL timers. */
{
uint8_t timer_id;
ENTER_CRITICAL_REGION();
for (timer_id = TAL_FIRST_TIMER_ID; timer_id <= TAL_LAST_TIMER_ID;
timer_id++)
{
pal_timer_stop(timer_id);
}
LEAVE_CRITICAL_REGION();
}
#endif
/* Clear TAL Incoming Frame queue and free used buffers. */
while (tal_incoming_frame_queue.size > 0)
{
buffer_t *frame = qmm_queue_remove(&tal_incoming_frame_queue, NULL);
if (NULL != frame)
{
bmm_buffer_free(frame);
}
}
#ifdef ENABLE_TFA
tfa_reset(set_default_pib);
#endif
/*
* Configure interrupt handling. Clear all pending interrupts.
* Handlers have been installed in tal_init(), and are never
* uninstalled.
*/
pal_trx_irq_flag_clr_rx_end();
pal_trx_irq_flag_clr_tx_end();
#if (defined BEACON_SUPPORT) || (defined ENABLE_TSTAMP)
pal_trx_irq_flag_clr_tstamp();
#endif /* (defined BEACON_SUPPORT) || (defined ENABLE_TSTAMP) */
pal_trx_irq_flag_clr_awake();
/*
* To make sure that the CSMA seed is properly set within the transceiver,
* put the trx to sleep briefly and wake it up again.
*/
tal_trx_sleep(SLEEP_MODE_1);
tal_trx_wakeup();
#ifdef ENABLE_FTN_PLL_CALIBRATION
{
/* Handle PLL calibration and filter tuning. */
retval_t timer_status;
/* Calibration timer has already been stopped within this function. */
/* Start periodic calibration timer.*/
timer_status = pal_timer_start(TAL_CALIBRATION,
TAL_CALIBRATION_TIMEOUT_US,
TIMEOUT_RELATIVE,
(FUNC_PTR)calibration_timer_handler_cb,
NULL);
if (timer_status != MAC_SUCCESS)
{
ASSERT("PLL calibration timer start problem" == 0);
}
}
#endif /* ENABLE_FTN_PLL_CALIBRATION */
#ifdef STB_ON_SAL
stb_restart();
#endif
return MAC_SUCCESS;
}
/*
* \brief Resets TAL state machine and sets the default PIB values if requested
*
* \param set_default_pib Defines whether PIB values need to be set
* to its default values
*
* \return MAC_SUCCESS if the transceiver state is changed to TRX_OFF
* FAILURE otherwise
*/
retval_t tal_reset(bool set_default_pib)
{
/*
* Do the reset stuff.
* Set the default PIBs depending on the given parameter
* set_default_pib.
* Do NOT generate random seed again.
*/
if (internal_tal_reset(set_default_pib) != MAC_SUCCESS) {
return FAILURE;
}
ENTER_CRITICAL_REGION();
tal_timers_stop();
LEAVE_CRITICAL_REGION();
/* Clear TAL Incoming Frame queue and free used buffers. */
while (tal_incoming_frame_queue.size > 0) {
buffer_t *frame = qmm_queue_remove(&tal_incoming_frame_queue,
NULL);
if (NULL != frame) {
bmm_buffer_free(frame);
}
}
#ifdef ENABLE_TFA
tfa_reset(set_default_pib);
#endif
/*
* Configure interrupt handling.
* Install a handler for the transceiver interrupt.
*/
trx_irq_init((FUNC_PTR)trx_irq_handler_cb);
/* The pending transceiver interrupts on the microcontroller are
* cleared. */
pal_trx_irq_flag_clr();
pal_trx_irq_en(); /* Enable transceiver main interrupt. */
#ifdef ENABLE_FTN_PLL_CALIBRATION
{
/* Handle PLL calibration and filter tuning. */
retval_t timer_status;
/* Calibration timer has already been stopped within this
* function. */
/* Start periodic calibration timer.*/
timer_status = pal_timer_start(TAL_CALIBRATION,
TAL_CALIBRATION_TIMEOUT_US,
TIMEOUT_RELATIVE,
(FUNC_PTR)calibration_timer_handler_cb,
NULL);
if (timer_status != MAC_SUCCESS) {
Assert("PLL calibration timer start problem" == 0);
}
}
#endif /* ENABLE_FTN_PLL_CALIBRATION */
return MAC_SUCCESS;
}
