static int padfftlen(int minifftlen, int numbetween, int *padlen)
/* Choose a good (easily factorable) FFT length and an */
/* appropriate padding length (for low accuracy work). */
/* We assume that minifftlen is a power-of-2... */
{
int lowaccbins, newlen;
/* First choose an appropriate number of full pad bins */
*padlen = minifftlen / 8;
lowaccbins = r_resp_halfwidth(LOWACC) * (numbetween / 2);
if (*padlen > lowaccbins)
*padlen = lowaccbins;
/* Now choose the FFT length (This requires an FFT that */
/* can perform non-power-of-two FFTs -- USE FFTW!!! */
newlen = (minifftlen + *padlen) * numbetween;
if (newlen <= 144)
return newlen;
else if (newlen <= 288)
return 288;
else if (newlen <= 540)
return 540;
else if (newlen <= 1080)
return 1080;
else if (newlen <= 2100)
return 2100;
else if (newlen <= 4200)
return 4200;
else if (newlen <= 8232)
return 8232;
else if (newlen <= 16464)
return 16464;
else if (newlen <= 32805)
return 32805;
else if (newlen <= 65610)
return 65610;
else if (newlen <= 131220)
return 131220;
else if (newlen <= 262440)
return 262440;
else if (newlen <= 525000)
return 525000;
else if (newlen <= 1050000)
return 1050000;
/* The following might get optimized out and give garbage... */
else
return (int) ((int) ((newlen + 1000) / 1000) * 1000.0);
}
int main(int argc, char *argv[])
/* dftfold: Does complex plane vector addition of a DFT freq */
/* Written by Scott Ransom on 31 Aug 00 based on Ransom and */
/* Eikenberry paper I (to be completed sometime...). */
{
FILE *infile;
char infilenm[200], outfilenm[200];
int dataperread;
unsigned long N;
double T, rr = 0.0, norm = 1.0;
dftvector dftvec;
infodata idata;
Cmdline *cmd;
/* Call usage() if we have no command line arguments */
if (argc == 1) {
Program = argv[0];
usage();
exit(1);
}
/* Parse the command line using the excellent program Clig */
cmd = parseCmdline(argc, argv);
#ifdef DEBUG
showOptionValues();
#endif
printf("\n\n");
printf(" DFT Vector Folding Routine\n");
printf(" by Scott M. Ransom\n");
printf(" 31 August, 2000\n\n");
/* Open the datafile and read the info file */
sprintf(infilenm, "%s.dat", cmd->argv[0]);
infile = chkfopen(infilenm, "rb");
readinf(&idata, cmd->argv[0]);
/* The number of points in datafile */
N = chkfilelen(infile, sizeof(float));
dataperread = N / cmd->numvect;
/* N = cmd->numvect * dataperread; */
T = N * idata.dt;
/* Calculate the Fourier frequency */
if (!cmd->rrP) {
if (cmd->ffP)
rr = cmd->ff;
else if (cmd->ppP)
rr = T / cmd->pp;
else {
printf("\n You must specify a frequency to fold! Exiting.\n\n");
}
} else
rr = cmd->rr;
/* Calculate the amplitude normalization if required */
if (cmd->normP)
norm = 1.0 / sqrt(cmd->norm);
else if (cmd->fftnormP) {
FILE *fftfile;
int kern_half_width, fftdatalen, startbin;
double rrfrac, rrint;
char fftfilenm[200];
fcomplex *fftdata;
sprintf(fftfilenm, "%s.fft", cmd->argv[0]);
fftfile = chkfopen(fftfilenm, "rb");
kern_half_width = r_resp_halfwidth(HIGHACC);
fftdatalen = 2 * kern_half_width + 10;
rrfrac = modf(rr, &rrint);
startbin = (int) rrint - fftdatalen / 2;
fftdata = read_fcomplex_file(fftfile, startbin, fftdatalen);
norm = 1.0 / sqrt(get_localpower3d(fftdata, fftdatalen,
rrfrac + fftdatalen / 2, 0.0, 0.0));
vect_free(fftdata);
fclose(fftfile);
}
/* Initialize the dftvector */
init_dftvector(&dftvec, dataperread, cmd->numvect, idata.dt, rr, norm, T);
/* Show our folding values */
printf("\nFolding data from '%s':\n", infilenm);
printf(" Folding Fourier Freq = %.5f\n", rr);
printf(" Folding Freq (Hz) = %-.11f\n", rr / T);
printf(" Folding Period (s) = %-.14f\n", T / rr);
printf(" Points per sub-vector = %d\n", dftvec.n);
printf(" Number of sub-vectors = %d\n", dftvec.numvect);
printf(" Normalization constant = %g\n", norm * norm);
/* Perform the actual vector addition */
{
int ii, jj;
float *data;
double real, imag, sumreal = 0.0, sumimag = 0.0;
double theta, aa, bb, cc, ss, dtmp;
double powargr, powargi, phsargr, phsargi, phstmp;
data = gen_fvect(dftvec.n);
theta = -TWOPI * rr / (double) N;
dtmp = sin(0.5 * theta);
aa = -2.0 * dtmp * dtmp;
bb = sin(theta);
cc = 1.0;
ss = 0.0;
for (ii = 0; ii < dftvec.numvect; ii++) {
chkfread(data, sizeof(float), dftvec.n, infile);
real = 0.0;
imag = 0.0;
for (jj = 0; jj < dftvec.n; jj++) {
real += data[jj] * cc;
imag += data[jj] * ss;
cc = aa * (dtmp = cc) - bb * ss + cc;
ss = aa * ss + bb * dtmp + ss;
}
dftvec.vector[ii].r = norm * real;
dftvec.vector[ii].i = norm * imag;
sumreal += dftvec.vector[ii].r;
sumimag += dftvec.vector[ii].i;
}
vect_free(data);
printf("\nDone:\n");
printf(" Vector sum = %.3f + %.3fi\n", sumreal, sumimag);
printf(" Total phase (deg) = %.2f\n", PHASE(sumreal, sumimag));
printf(" Total power = %.2f\n", POWER(sumreal, sumimag));
printf("\n");
}
fclose(infile);
/* Write the output structure */
sprintf(outfilenm, "%s_%.3f.dftvec", cmd->argv[0], rr);
write_dftvector(&dftvec, outfilenm);
/* Free our vector and return */
free_dftvector(&dftvec);
return (0);
}
int main(int argc, char *argv[])
{
FILE *fftfile, *candfile = NULL, *psfile = NULL;
char filenm[100], candnm[100], psfilenm[120];
float locpow, norm, powargr, powargi;
float *powr, *spreadpow, *minizoompow, *freqs;
fcomplex *data, *minifft, *minizoom, *spread;
fcomplex *resp, *kernel;
double T, dr, ftobinp;
int ii, nbins, ncands, candnum, lofreq = 0, nzoom, numsumpow = 1;
int numbetween, numkern, kern_half_width;
binaryprops binprops;
infodata idata;
if (argc < 3 || argc > 6) {
usage();
exit(1);
}
printf("\n\n");
printf(" Binary Candidate Display Routine\n");
printf(" by Scott M. Ransom\n\n");
/* Initialize the filenames: */
sprintf(filenm, "%s.fft", argv[1]);
sprintf(candnm, "%s_bin.cand", argv[1]);
/* Read the info file */
readinf(&idata, argv[1]);
if (idata.object) {
printf("Plotting a %s candidate from '%s'.\n", idata.object, filenm);
} else {
printf("Plotting a candidate from '%s'.\n", filenm);
}
T = idata.N * idata.dt;
/* Open the FFT file and get its length */
fftfile = chkfopen(filenm, "rb");
nbins = chkfilelen(fftfile, sizeof(fcomplex));
/* Open the candidate file and get its length */
candfile = chkfopen(candnm, "rb");
ncands = chkfilelen(candfile, sizeof(binaryprops));
/* The candidate number to examine */
candnum = atoi(argv[2]);
/* Check that candnum is in range */
if ((candnum < 1) || (candnum > ncands)) {
printf("\nThe candidate number is out of range.\n\n");
exit(1);
}
/* The lowest freq present in the FFT file */
if (argc >= 4) {
lofreq = atoi(argv[3]);
if ((lofreq < 0) || (lofreq > nbins - 1)) {
printf("\n'lofreq' is out of range.\n\n");
exit(1);
}
}
/* Is the original FFT a sum of other FFTs with the amplitudes added */
/* in quadrature? (i.e. an incoherent sum) */
if (argc >= 5) {
numsumpow = atoi(argv[4]);
if (numsumpow < 1) {
printf("\nNumber of summed powers must be at least one.\n\n");
exit(1);
}
}
/* Initialize PGPLOT using Postscript if requested */
if ((argc == 6) && (!strcmp(argv[5], "ps"))) {
sprintf(psfilenm, "%s_bin_cand_%d.ps", argv[1], candnum);
cpgstart_ps(psfilenm, "landscape");
} else {
cpgstart_x("landscape");
}
/* Read the binary candidate */
chkfileseek(candfile, (long) (candnum - 1), sizeof(binaryprops), SEEK_SET);
chkfread(&binprops, sizeof(binaryprops), 1, candfile);
fclose(candfile);
/* Output the binary candidate */
print_bin_candidate(&binprops, 2);
/* Allocate some memory */
powr = gen_fvect(binprops.nfftbins);
minifft = gen_cvect(binprops.nfftbins / 2);
spread = gen_cvect(binprops.nfftbins);
spreadpow = gen_fvect(binprops.nfftbins);
nzoom = 2 * ZOOMFACT * ZOOMNEIGHBORS;
minizoom = gen_cvect(nzoom);
minizoompow = gen_fvect(nzoom);
/* Allocate and initialize our interpolation kernel */
numbetween = 2;
kern_half_width = r_resp_halfwidth(LOWACC);
numkern = 2 * numbetween * kern_half_width;
resp = gen_r_response(0.0, numbetween, numkern);
kernel = gen_cvect(binprops.nfftbins);
place_complex_kernel(resp, numkern, kernel, binprops.nfftbins);
COMPLEXFFT(kernel, binprops.nfftbins, -1);
/* Read the data from the FFT file */
data = read_fcomplex_file(fftfile, binprops.lowbin - lofreq, binprops.nfftbins);
/* Turn the Fourier amplitudes into powers */
for (ii = 0; ii < binprops.nfftbins; ii++)
powr[ii] = POWER(data[ii].r, data[ii].i);
/* Chop the powers that are way above the median level */
prune_powers(powr, binprops.nfftbins, numsumpow);
/* Perform the minifft */
memcpy((float *) minifft, powr, sizeof(float) * binprops.nfftbins);
realfft((float *) minifft, binprops.nfftbins, -1);
/* Calculate the normalization constant */
norm = sqrt((double) binprops.nfftbins * (double) numsumpow) / minifft[0].r;
locpow = minifft[0].r / binprops.nfftbins;
/* Divide the original power spectrum by the local power level */
for (ii = 0; ii < binprops.nfftbins; ii++)
powr[ii] /= locpow;
/* Now normalize the miniFFT */
minifft[0].r = 1.0;
minifft[0].i = 1.0;
for (ii = 1; ii < binprops.nfftbins / 2; ii++) {
minifft[ii].r *= norm;
minifft[ii].i *= norm;
}
/* Interpolate the minifft and convert to power spectrum */
corr_complex(minifft, binprops.nfftbins / 2, RAW,
kernel, binprops.nfftbins, FFT,
spread, binprops.nfftbins, kern_half_width,
numbetween, kern_half_width, CORR);
for (ii = 0; ii < binprops.nfftbins; ii++)
spreadpow[ii] = POWER(spread[ii].r, spread[ii].i);
/* Plot the initial data set */
freqs = gen_freqs(binprops.nfftbins, binprops.lowbin / T, 1.0 / T);
xyline(binprops.nfftbins, freqs, powr, "Pulsar Frequency (hz)",
"Power / Local Power", 1);
vect_free(freqs);
printf("The initial data set (with high power outliers removed):\n\n");
/* Plot the miniFFT */
freqs = gen_freqs(binprops.nfftbins, 0.0, T / (2 * binprops.nfftbins));
xyline(binprops.nfftbins, freqs, spreadpow, "Binary Period (sec)",
"Normalized Power", 1);
vect_free(freqs);
printf("The miniFFT:\n\n");
/* Interpolate and plot the actual candidate peak */
ftobinp = T / binprops.nfftbins;
freqs = gen_freqs(nzoom, (binprops.rdetect - ZOOMNEIGHBORS) *
ftobinp, ftobinp / (double) ZOOMFACT);
for (ii = 0; ii < nzoom; ii++) {
dr = -ZOOMNEIGHBORS + (double) ii / ZOOMFACT;
rz_interp(minifft, binprops.nfftbins / 2, binprops.rdetect + dr,
0.0, kern_half_width, &minizoom[ii]);
minizoompow[ii] = POWER(minizoom[ii].r, minizoom[ii].i);
}
xyline(nzoom, freqs, minizoompow, "Binary Period (sec)", "Normalized Power", 1);
vect_free(freqs);
printf("The candidate itself:\n\n");
printf("Done.\n\n");
/* Cleanup */
cpgend();
vect_free(data);
vect_free(powr);
vect_free(resp);
vect_free(kernel);
vect_free(minifft);
vect_free(spread);
vect_free(spreadpow);
vect_free(minizoom);
vect_free(minizoompow);
fclose(fftfile);
if ((argc == 6) && (!strcmp(argv[5], "ps"))) {
fclose(psfile);
}
return (0);
}
int main(int argc, char *argv[])
{
int ii, jj, numbirds;
double lofreq, hifreq;
char *rootfilenm;
birdie *newbird;
GSList *zapped = NULL;
infodata idata;
Cmdline *cmd;
/* Call usage() if we have no command line arguments */
if (argc == 1) {
Program = argv[0];
printf("\n");
usage();
exit(1);
}
/* Parse the command line using the excellent program Clig */
cmd = parseCmdline(argc, argv);
#ifdef DEBUG
showOptionValues();
#endif
printf("\n\n");
printf(" Interactive/Automatic Birdie Zapping Program\n");
printf(" by Scott M. Ransom\n");
printf(" January, 2001\n\n");
if (!cmd->zapP && !cmd->inzapfileP && !cmd->outzapfileP) {
printf("You must specify '-in' and '-out' if you are not\n");
printf("automatically zapping a file (with '-zap').\n\n");
exit(0);
}
{
int hassuffix = 0;
char *suffix;
hassuffix = split_root_suffix(cmd->argv[0], &rootfilenm, &suffix);
if (hassuffix) {
if (strcmp(suffix, "fft") != 0) {
printf("\nInput file ('%s') must be a FFT file ('.fft')!\n\n",
cmd->argv[0]);
free(suffix);
exit(0);
}
free(suffix);
} else {
printf("\nInput file ('%s') must be a FFT file ('.fft')!\n\n",
cmd->argv[0]);
exit(0);
}
}
/* Read the info file */
readinf(&idata, rootfilenm);
if (idata.object) {
printf("Examining %s data from '%s'.\n\n",
remove_whitespace(idata.object), cmd->argv[0]);
} else {
printf("Examining data from '%s'.\n\n", cmd->argv[0]);
}
T = idata.dt * idata.N;
dr = 1.0 / NUMBETWEEN;
if (cmd->zapP) { /* Automatic */
double *bird_lobins, *bird_hibins, hibin;
if (!cmd->zapfileP) {
printf("You must specify a 'zapfile' containing freqs\n");
printf("and widths if you want to write to the FFT file.\n\n");
free(rootfilenm);
exit(0);
}
hibin = idata.N / 2;
/* Read the Standard bird list */
numbirds = get_birdies(cmd->zapfile, T, cmd->baryv,
&bird_lobins, &bird_hibins);
/* Zap the birdies */
fftfile = chkfopen(cmd->argv[0], "rb+");
for (ii = 0; ii < numbirds; ii++) {
if (bird_lobins[ii] >= hibin)
break;
if (bird_hibins[ii] >= hibin)
bird_hibins[ii] = hibin - 1;
zapbirds(bird_lobins[ii], bird_hibins[ii], fftfile, NULL);
}
vect_free(bird_lobins);
vect_free(bird_hibins);
} else { /* Interactive */
int *bird_numharms;
double *bird_basebins;
/* Read the Standard bird list */
numbirds = get_std_birds(cmd->inzapfile, T, cmd->baryv,
&bird_basebins, &bird_numharms);
/* Create our correlation kernel */
{
int numkern;
fcomplex *resp;
khw = r_resp_halfwidth(LOWACC);
numkern = 2 * NUMBETWEEN * khw;
resp = gen_r_response(0.0, NUMBETWEEN, numkern);
kernel = gen_cvect(FFTLEN);
place_complex_kernel(resp, numkern, kernel, FFTLEN);
COMPLEXFFT(kernel, FFTLEN, -1);
vect_free(resp);
}
/* Loop over the birdies */
fftfile = chkfopen(cmd->argv[0], "rb");
cpgstart_x("landscape");
cpgask(0);
for (ii = 0; ii < numbirds; ii++) {
for (jj = 0; jj < bird_numharms[ii]; jj++) {
process_bird(bird_basebins[ii], jj + 1, &lofreq, &hifreq);
if (lofreq && hifreq) {
newbird = birdie_create(lofreq, hifreq, cmd->baryv);
zapped = g_slist_insert_sorted(zapped, newbird, birdie_compare);
}
}
}
cpgclos();
/* Output the birdies */
{
FILE *outfile;
outfile = chkfopen(cmd->outzapfile, "w");
fprintf(outfile, "#\n");
fprintf(outfile,
"# Topocentric birdies found using 'zapbirds' for '%s'\n",
cmd->argv[0]);
fprintf(outfile, "#\n");
fprintf(outfile, "# Frequency (Hz) Width (Hz)\n");
fprintf(outfile, "#\n");
g_slist_foreach(zapped, birdie_print, outfile);
fclose(outfile);
}
printf("\nOutput birdie file is '%s'.\n\n", cmd->outzapfile);
/* Free the memory */
g_slist_foreach(zapped, birdie_free, NULL);
g_slist_free(zapped);
vect_free(kernel);
vect_free(bird_numharms);
vect_free(bird_basebins);
}
fclose(fftfile);
free(rootfilenm);
printf("Done\n\n");
return 0;
}