/**
* @brief Function for turning on RX carrier.
*/
void radio_rx_carrier(uint8_t mode, uint8_t channel)
{
radio_disable();
NRF_RADIO->SHORTS = RADIO_SHORTS_READY_START_Msk;
NRF_RADIO->FREQUENCY = channel;
NRF_RADIO->TASKS_RXEN = 1;
}
/*
* Start modulated TX carrier. This is done by repeatedly sending a packet with random address and
* random payload.
*/
static void radio_modulated_tx_carrier(uint8_t txpower, uint8_t mode, uint8_t channel)
{
radio_disable();
generate_modulated_rf_packet();
NRF_RADIO->SHORTS = RADIO_SHORTS_END_DISABLE_Msk | RADIO_SHORTS_READY_START_Msk | RADIO_SHORTS_DISABLED_TXEN_Msk;;
NRF_RADIO->TXPOWER = (txpower << RADIO_TXPOWER_TXPOWER_Pos);
NRF_RADIO->MODE = (mode << RADIO_MODE_MODE_Pos);
NRF_RADIO->FREQUENCY = channel;
NRF_RADIO->TASKS_TXEN = 1;
}
/**
* @brief Function for turning on the TX carrier test mode.
*/
void radio_tx_carrier(uint8_t txpower, uint8_t mode, uint8_t channel)
{
radio_disable();
NRF_RADIO->SHORTS = RADIO_SHORTS_READY_START_Msk;
NRF_RADIO->TXPOWER = (txpower << RADIO_TXPOWER_TXPOWER_Pos);
NRF_RADIO->MODE = (mode << RADIO_MODE_MODE_Pos);
NRF_RADIO->FREQUENCY = channel;
NRF_RADIO->TEST = (RADIO_TEST_CONST_CARRIER_Enabled << RADIO_TEST_CONST_CARRIER_Pos) \
| (RADIO_TEST_PLL_LOCK_Enabled << RADIO_TEST_PLL_LOCK_Pos);
NRF_RADIO->TASKS_TXEN = 1;
}
void ll_scan_timeout_cb (void)
{
switch (m_scanner.state)
{
case SCANNER_STATE_RECEIVE_SCAN_RSP:
m_state_receive_scan_rsp_exit ();
radio_disable ();
m_state_receive_adv_entry ();
break;
default:
break;
}
}
u8 mode_select_display_func(ui_mode_t mode, ui_display_event_t event)
{
if (event == CONFIG_SHORT_PRESS)
{
u16 m = 1;
u8 i;
for(i=0; i<3-mode_select_digit; i++)
{
m *= 10;
}
u8 p = (mode_select_current/m)%10;
mode_select_current -= p*m;
p = (p+1)%10;
mode_select_current += p*m;
}
else if (event == CONFIG_LONG_PRESS)
{
++mode_select_digit;
if (mode_select_digit >= 4)
{
/* Save the new config word */
save_persist_data_16(PDATA_CONFIG_WORD_1L + mode_select_word*2, ~mode_select_current);
++mode_select_word;
do_config_word(mode_select_word);
}
if (mode_select_word >= NUM_CONFIG_WORDS)
{
/* wait for button release */
while (!(LED_PIN & (1<<LED_BIT)));
radio_disable();
/* reset */
void (*rstvec)() = (void (*)())0;
(*rstvec)();
}
}
output_number(MODE_MODE_SELECT + mode_select_word + 1,
mode_select_current, CENTER_NONE, DFLAGS_FLASH_PLACE_0<<mode_select_digit);
return 1;
}
void ll_scan_rx_cb (bool crc_valid)
{
/* Received invalid packet */
if (!crc_valid)
{
switch(m_scanner.state)
{
case SCANNER_STATE_RECEIVE_ADV:
m_packets_invalid++;
m_state_receive_adv_exit ();
radio_disable ();
m_state_receive_adv_entry ();
break;
case SCANNER_STATE_RECEIVE_SCAN_RSP:
m_packets_invalid++;
m_state_receive_scan_rsp_exit ();
radio_disable ();
m_state_receive_adv_entry ();
break;
default:
break;
}
}
switch (m_scanner.state)
{
/* Packet received */
case SCANNER_STATE_RECEIVE_ADV:
m_packets_valid++;
switch (m_rx_buf[0] & 0x0F)
{
/* If active scanning is enabled, these packets should be reponded to with
* a SCAN_REQ, and we should wait for a SCAN_RSP.
*/
case PACKET_TYPE_ADV_IND:
m_state_receive_adv_exit ();
m_adv_report_generate (m_rx_buf);
/* If we're doing active scanning, prepare to send SCAN REQ, otherwise
* loop back around to receive a new advertisement.
*/
if (m_scanner.params.scan_type == BTLE_SCAN_TYPE_ACTIVE)
{
m_state_send_scan_req_entry ();
}
else
{
m_state_receive_adv_entry ();
}
break;
case PACKET_TYPE_ADV_SCAN_IND:
m_state_receive_adv_exit ();
m_adv_report_generate (m_rx_buf);
/* If we're doing active scanning, prepare to send SCAN REQ, otherwise
* loop back around to receive a new advertisement.
*/
if (m_scanner.params.scan_type == BTLE_SCAN_TYPE_ACTIVE)
{
m_state_send_scan_req_entry ();
}
else
{
m_state_receive_adv_entry ();
}
break;
/* These packets do not require response.
*/
case PACKET_TYPE_ADV_DIRECT_IND:
m_state_receive_adv_exit ();
radio_disable();
m_adv_report_generate (m_rx_buf);
m_state_receive_adv_entry ();
break;
case PACKET_TYPE_ADV_NONCONN_IND:
m_state_receive_adv_exit ();
radio_disable();
m_adv_report_generate (m_rx_buf);
m_state_receive_adv_entry ();
break;
/* This should not have happened */
default:
m_state_receive_adv_exit ();
radio_disable();
m_state_receive_adv_entry();
}
break;
case SCANNER_STATE_RECEIVE_SCAN_RSP:
m_packets_valid++;
m_state_receive_scan_rsp_exit ();
m_adv_report_generate (m_rx_buf);
m_state_receive_adv_entry ();
break;
default:
break;
}
}
/**
* @brief Handle trickle timing events
*/
static void trickle_step_callback(void)
{
TICK_PIN(6);
/* check if timeslot is about to end */
if (timeslot_get_remaining_time() < RADIO_SAFETY_TIMING_US)
return;
uint64_t time_now = global_time + timer_get_timestamp();
trickle_time_update(time_now);
packet_t packet;
bool has_anything_to_send = false;
mesh_srv_packet_assemble(&packet, PACKET_DATA_MAX_LEN * PACKET_MAX_CHAIN_LEN,
&has_anything_to_send);
if (has_anything_to_send)
{
TICK_PIN(PIN_MESH_TX);
radio_disable();
uint8_t packet_and_addr_type = PACKET_TYPE_ADV_NONCONN |
((packet.sender.addr_type == BLE_GAP_ADDR_TYPE_PUBLIC)?
0 :
PACKET_ADDR_TYPE_MASK);
uint8_t* temp_data_ptr = &packet.data[0];
uint8_t* tx_data_ptr = &tx_data[0];
tx_data_ptr[PACKET_TYPE_POS] = packet_and_addr_type;
/* Code structured for packet chaining, although this is yet
to be implemented. */
do
{
uint8_t min_len = ((packet.length > PACKET_DATA_MAX_LEN)?
PACKET_DATA_MAX_LEN :
packet.length);
tx_data_ptr[PACKET_PADDING_POS] = 0;
tx_data_ptr[PACKET_LENGTH_POS] = (min_len + PACKET_ADDR_LEN);
tx_data_ptr[PACKET_TYPE_POS] = packet_and_addr_type;
memcpy(&tx_data_ptr[PACKET_ADDR_POS], packet.sender.addr, PACKET_ADDR_LEN);
memcpy(&tx_data_ptr[PACKET_DATA_POS], &temp_data_ptr[0], min_len);
radio_event_t tx_event;
tx_event.access_address = 0;
rbc_mesh_channel_get(&tx_event.channel);
tx_event.event_type = RADIO_EVENT_TYPE_TX;
tx_event.packet_ptr = &tx_data_ptr[0];
tx_event.start_time = 0;
tx_event.callback.tx = NULL;
radio_order(&tx_event);
TICK_PIN(0);
} while (0);
order_search(); /* search for the rest of the timeslot */
}
/* order next processing */
uint64_t next_time;
uint64_t end_time = timeslot_get_end_time();
uint32_t error_code = mesh_srv_get_next_processing_time(&next_time);
if (error_code == NRF_SUCCESS && next_time < global_time + end_time)
{
timer_abort(step_timer_index);
step_timer_index = timer_order_cb(next_time - global_time, trickle_step_callback);
}
}
/**
* @brief Function for stopping Timer 0.
*/
void radio_sweep_end(void)
{
NRF_TIMER0->TASKS_STOP = 1;
radio_disable();
}
/**
* @brief Radio signal callback handler taking care of all signals in searching
* mode
*/
static nrf_radio_signal_callback_return_param_t* radio_signal_callback(uint8_t sig)
{
static uint32_t requested_extend_time = 0;
static uint32_t successful_extensions = 0;
static uint32_t timeslot_count = 0;
if (sig == NRF_RADIO_CALLBACK_SIGNAL_TYPE_START)
{
g_timeslot_forced_command = TS_FORCED_COMMAND_NONE;
}
else /* on forced command */
{
switch (g_timeslot_forced_command)
{
case TS_FORCED_COMMAND_STOP:
g_ret_param.callback_action = NRF_RADIO_SIGNAL_CALLBACK_ACTION_END;
g_is_in_timeslot = false;
g_end_timer_triggered = false;
CLEAR_PIN(PIN_IN_TS);
event_handler_on_ts_end();
timeslot_count = 0;
return &g_ret_param;
case TS_FORCED_COMMAND_RESTART:
timeslot_order_earliest(TIMESLOT_SLOT_LENGTH, true);
g_is_in_timeslot = false;
g_end_timer_triggered = false;
CLEAR_PIN(PIN_IN_TS);
event_handler_on_ts_end();
radio_disable();
return &g_ret_param;
default:
break;
}
}
g_ret_param.callback_action = NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE;
g_is_in_callback = true;
SET_PIN(PIN_IN_CB);
switch (sig)
{
case NRF_RADIO_CALLBACK_SIGNAL_TYPE_START:
{
SET_PIN(PIN_IN_TS);
g_is_in_timeslot = true;
g_end_timer_triggered = false;
successful_extensions = 0;
if (timeslot_count > 0)
{
global_time_update();
}
mesh_packet_on_ts_begin();
event_handler_on_ts_begin();
timer_on_ts_begin();
tc_on_ts_begin();
g_negotiate_timeslot_length = TIMESLOT_SLOT_EXTEND_LENGTH;
g_timeslot_length = g_next_timeslot_length;
timer_order_cb_sync_exec(TIMER_INDEX_TS_END, g_timeslot_length - end_timer_margin(),
end_timer_handler);
/* attempt to extend our time right away */
timeslot_extend(g_negotiate_timeslot_length);
/* increase timeslot-count, but skip =0 on rollover */
if (!++timeslot_count)
{
timeslot_count++;
}
break;
}
case NRF_RADIO_CALLBACK_SIGNAL_TYPE_RADIO:
/* send to radio control module */
SET_PIN(PIN_RADIO_SIGNAL);
radio_event_handler();
CLEAR_PIN(PIN_RADIO_SIGNAL);
break;
case NRF_RADIO_CALLBACK_SIGNAL_TYPE_TIMER0:
/* send to timer control module */
SET_PIN(PIN_TIMER_SIGNAL);
timer_event_handler();
CLEAR_PIN(PIN_TIMER_SIGNAL);
break;
case NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_SUCCEEDED:
g_timeslot_length += requested_extend_time;
requested_extend_time = 0;
++successful_extensions;
timer_abort(TIMER_INDEX_TS_END);
timer_order_cb_sync_exec(TIMER_INDEX_TS_END, g_timeslot_length - end_timer_margin(),
end_timer_handler);
g_ret_param.callback_action = NRF_RADIO_SIGNAL_CALLBACK_ACTION_NONE;
TICK_PIN(PIN_EXTENSION_OK);
if (g_timeslot_length + g_negotiate_timeslot_length < TIMESLOT_MAX_LENGTH)
{
timeslot_extend(g_negotiate_timeslot_length);
}
else
{
/* done extending, check for new trickle event */
vh_on_timeslot_begin();
}
break;
case NRF_RADIO_CALLBACK_SIGNAL_TYPE_EXTEND_FAILED:
g_negotiate_timeslot_length >>= 1;
TICK_PIN(PIN_EXTENSION_FAIL);
if (g_negotiate_timeslot_length > 1000)
{
timeslot_extend(g_negotiate_timeslot_length);
}
else
{
/* done extending, check for new trickle event */
vh_on_timeslot_begin();
}
break;
default:
APP_ERROR_CHECK(NRF_ERROR_INVALID_STATE);
}
if (g_end_timer_triggered)
{
timeslot_order_earliest(TIMESLOT_SLOT_LENGTH, true);
g_is_in_timeslot = false;
g_end_timer_triggered = false;
CLEAR_PIN(PIN_IN_TS);
event_handler_on_ts_end();
radio_disable();
timer_on_ts_end();
}
else if (g_ret_param.callback_action == NRF_RADIO_SIGNAL_CALLBACK_ACTION_EXTEND)
{
requested_extend_time = g_ret_param.params.extend.length_us;
}
else
{
requested_extend_time = 0;
}
g_is_in_callback = false;
CLEAR_PIN(PIN_IN_CB);
return &g_ret_param;
}
