int rakmgr_open_cmdMode(void)
{
int retval = RAK_SUCCESS;
int retry_times = 0;
// RAK_DEBUG_PORT_PIN=~RAK_DEBUG_PORT_PIN;
if (rakmgr_module_work_mode == ASSIST_CMD_TYPE) {
return retval;
}
while (1) {
if (++ retry_times > 10) {
retval = RAK_FAIL;
break;
}
// Opening AT mode may get failed because unwanted network transmission can break in the process.
// In every retry, purge all buffer data which should not appear in the process.
rakmgr_uartbuf_init();
rakmgr_sockdata_prg(-1);
rak_UART_send((uint8_t *) RAK_OPEN_CMD_REQUEST, strlen(RAK_OPEN_CMD_REQUEST));
rakmgr_sockdata_prg(-1);
retval = rakmgr_sockdata_timeout(RAK_200MS_TIMEOUT, rakmgr_sockdata_poll_trn);
if (retval < 0) {
retval = RAK_SUCCESS;
continue;
}
if (uCmdRspFrame.uCmdRspBuf[0] == RAK_ACK_FOR_REQUEST) {
rak_UART_send((uint8_t *) RAK_CONFIRM_CMD_MODE, strlen(RAK_CONFIRM_CMD_MODE));
rakmgr_sockdata_prg(-1);
retval = rakmgr_sockdata_timeout(RAK_200MS_TIMEOUT, rakmgr_sockdata_poll_at_resp);
if (retval < 0) {
retval= RAK_SUCCESS;
continue;
}
if (strncmp((char *) uCmdRspFrame.uCmdRspBuf, "OK", 2) == 0) {
retval = RAK_SUCCESS;
// FIXME
rakmgr_module_work_mode = ASSIST_CMD_TYPE;
break;
}
else {
retval = RAK_SUCCESS;
continue;
}
}
else {
retval = RAK_SUCCESS;
continue;
}
}
// RAK_DEBUG_PORT_PIN=~RAK_DEBUG_PORT_PIN;
return retval;
}
/*=============================================================================*/
int8 rak_query_constatus(void)
{
int8 retval=0;
char rak_sendCmd[20]="";
strcpy(rak_sendCmd,RAK_QUERY_CONSTATUS_CMD);
strcat(rak_sendCmd,RAK_END);
retval=rak_UART_send((uint8_t*)rak_sendCmd,strlen(rak_sendCmd));//发送打开模块命令接口请求
return retval;
}
/*=============================================================================*/
int8 rak_copy_uConfig(void)
{
int8 retval=0;
char rak_sendCmd[20]="";
strcpy(rak_sendCmd,RAK_COPY_UCONFIG_CMD);
strcat(rak_sendCmd,RAK_END);
retval=rak_UART_send((uint8_t*)rak_sendCmd,strlen(rak_sendCmd));//发送打开模块命令接口请求
return retval;
}
/*=============================================================================*/
int8 rak_query_ipconifg(void)
{
int8 retval=0;
char rak_sendCmd[20]="";
strcpy(rak_sendCmd,RAK_QUERY_IPCONFIG_CMD);
strcat(rak_sendCmd,RAK_END);
retval=rak_UART_send((uint8_t*)rak_sendCmd,strlen(rak_sendCmd));//发送打开模块命令接口请求
return retval;
}
/*=============================================================================*/
int8 rak_read_restoreConfig(void)
{
int8 retval=0;
char rak_sendCmd[30]="";
strcpy(rak_sendCmd,RAK_READ_RCONFIG_CMD);
strcat(rak_sendCmd,RAK_END);
retval=rak_UART_send((uint8_t*)rak_sendCmd,strlen(rak_sendCmd));//发送打开模块命令接口请求
return retval;
}
/*=============================================================================*/
int8 rak_easy_txrxMode(void)
{
int8 retval=0;
char rak_sendCmd[20]="";
strcpy(rak_sendCmd,RAK_ENTER_EASYTXRX_CMD);
strcat(rak_sendCmd,RAK_END);
retval=rak_UART_send((uint8_t*)rak_sendCmd,strlen(rak_sendCmd));//发送打开模块命令接口请求
return retval;
}
/*=============================================================================*/
int8 rak_query_macaddr(void)
{
int8 retval=0;
char rak_sendCmd[20]="";
strcpy(rak_sendCmd,RAK_QUERY_MACADDR_CMD);
strcat(rak_sendCmd,RAK_END);
retval=rak_UART_send((uint8_t*)rak_sendCmd,strlen(rak_sendCmd));//发送打开模块命令接口请求
return retval;
}
int8 rak_write_restoreConfig(void)
{
int8 retval=0;
char rak_sendCmd[1000]="";
char rak_sendLenth[5]="";
uint16 SendLength=0;
uint16 SendHeadLen=0;
uint16 WriteLength=0;
uint16 AddLength=0;
/**********模式 参数*************/
AddLength=sprintf(rak_sendCmd,"%s%s%s",RAK_WLAN_MODE,RAK_AND,RAK_POWER_MODE);
WriteLength+=AddLength;
if(strcmp(RAK_WLAN_MODE, "wifi_mode=AP") == 0)
{
/**********AP 参数*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s%s%s%s%s%s%s%s%s",RAK_AND,RAK_AP_SSID,
RAK_AND,RAK_AP_CHANNEL,
RAK_AND,RAK_AP_SECU_EN,
RAK_AND,RAK_AP_PSK,
RAK_AND,RAK_AP_IPADDR,
RAK_AND,RAK_AP_NETMASK,
RAK_AND,RAK_AP_BDCAST_EN
);
WriteLength+=AddLength;
}else
{
/**********STA 参数*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s",RAK_AND,RAK_STA_SSID,
RAK_AND,RAK_STA_SECU_EN,
RAK_AND,RAK_STA_PSK,
RAK_AND,RAK_STA_DHCP_EN,
RAK_AND,RAK_STA_IPADDR,
RAK_AND,RAK_STA_NETMASK,
RAK_AND,RAK_STA_GATEWAY,
RAK_AND,RAK_STA_DNSS1,
RAK_AND,RAK_STA_DNSS2
);
WriteLength+=AddLength;
}
/**********UART 参数*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s%s%s%s%s", RAK_AND,RAK_UART_BAUD,
RAK_AND,RAK_UART_DATALEN,
RAK_AND,RAK_UART_PARITYEN,
RAK_AND,RAK_UART_STOPLEN,
RAK_AND,RAK_UART_RTSCTSEN
);
WriteLength+=AddLength;
/**********Socket 参数*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s",RAK_AND,RAK_SOCKET_BAUD);
WriteLength+=AddLength;
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s%s%s%s%s",RAK_AND,RAK_SOCKETA_TYPE,
RAK_AND,RAK_SOCKETA_LPORT,
RAK_AND,RAK_SOCKETA_DESTIP,
RAK_AND,RAK_SOCKETA_DPORT,
RAK_AND,RAK_SOCKETA_TCPTIMEOUT
);
WriteLength+=AddLength;
if(strcmp(RAK_SOCKET_BAUD, "socket_multi_en=1") == 0)
{
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s%s%s%s%s",RAK_AND,RAK_SOCKETB_TYPE,
RAK_AND,RAK_SOCKETB_LPORT,
RAK_AND,RAK_SOCKETB_DESTIP,
RAK_AND,RAK_SOCKETB_DPORT,
RAK_AND,RAK_SOCKETB_TCPTIMEOUT
);
WriteLength+=AddLength;
}
/**********Name 参数*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s",RAK_AND,RAK_MODULE_NAME,RAK_AND,RAK_MODULE_GROUP);
WriteLength+=AddLength;
/**********WEB 参数*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s",RAK_AND,RAK_WEB_USERNAME,
RAK_AND,RAK_WEB_PASSWORD,
RAK_AND,RAK_WEB_DLANGUAGE);
WriteLength+=AddLength;
/**********Function 选择*************/
AddLength=sprintf(&rak_sendCmd[WriteLength],"%s%s%s%s%s%s",RAK_AND,RAK_WEB_FUNCEN,
RAK_AND,RAK_UDP_FUNCEN,
RAK_AND,RAK_MODE_PIN
);
WriteLength+=AddLength;
//填充配置参数长度
SendLength=WriteLength;
sprintf(rak_sendLenth,"%d",SendLength);
sprintf(&rak_sendCmd[WriteLength],"%s",RAK_END);
SendHeadLen=sprintf((char *)uCmdRspFrame.uCmdRspBuf,"%s%s%s",RAK_WRITE_RCONFIG_CMD,rak_sendLenth,RAK_COMMA);
sprintf((char *)&uCmdRspFrame.uCmdRspBuf[SendHeadLen],"%s",rak_sendCmd);
retval=rak_UART_send(uCmdRspFrame.uCmdRspBuf,SendLength+SendHeadLen+2);//发送打开模块命令接口请求
return retval;
}