Exemplos de rb4xx_add_device_spi em C++ (Cpp)

Exemplo n.º 1

Arquivo: mach-rb-4xx.c Projeto: 1x23/unifi-gpl

static void __init rb493_setup(void)
{
	rb4xx_add_device_spi();

	ar71xx_add_device_mdio(0x3fffff00);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.phy_mask = 0;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x00000001;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
					rb4xx_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(rb4xx_gpio_buttons),
					rb4xx_gpio_buttons);

	platform_device_register(&rb4xx_nand_device);

	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}

Exemplo n.º 2

Arquivo: mach-rb-4xx.c Projeto: mirko/openwrt-x-burst

static void __init rb411_setup(void)
{
	rb4xx_generic_setup();
	rb4xx_add_device_spi();

	ar71xx_add_device_mdio(0xfffffffe);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.phy_mask = 0x00000001;

	ar71xx_add_device_eth(0);

	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}

Exemplo n.º 3

Arquivo: mach-rb-4xx.c Projeto: mirko/openwrt-x-burst

static void __init rb450_setup(void)
{
	rb4xx_generic_setup();
	rb4xx_add_device_spi();

	ar71xx_add_device_mdio(0xffffffe0);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.phy_mask = 0x0000000f;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x00000010;

	ar71xx_add_device_eth(1);
	ar71xx_add_device_eth(0);
}

Exemplo n.º 4

Arquivo: mach-rb4xx.c Projeto: Cribstone/linino

static void __init rb450_generic_setup(int gige)
{
	rb4xx_generic_setup();
	rb4xx_add_device_spi();

	ar71xx_add_device_mdio(0xffffffe0);

	ar71xx_eth0_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.phy_mask = (gige) ? (1 << 0) : 0;
	ar71xx_eth0_data.speed = (gige) ? SPEED_1000 : SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = (gige) ? PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x00000010;

	ar71xx_add_device_eth(1);
	ar71xx_add_device_eth(0);
}

Exemplo n.º 5

Arquivo: mach-rb4xx.c Projeto: Cribstone/linino

static void __init rb493_setup(void)
{
	rb4xx_generic_setup();
	rb4xx_add_device_spi();

	ar71xx_add_device_mdio(0x3fffff00);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.speed = SPEED_100;
	ar71xx_eth0_data.duplex = DUPLEX_FULL;

	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
	ar71xx_eth1_data.phy_mask = 0x00000001;

	ar71xx_add_device_eth(0);
	ar71xx_add_device_eth(1);

	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}

Exemplo n.º 6

Arquivo: mach-rb-4xx.c Projeto: 1x23/unifi-gpl

static void __init rb411_setup(void)
{
	rb4xx_add_device_spi();

	ar71xx_add_device_mdio(0xfffffffe);

	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
	ar71xx_eth0_data.phy_mask = 0x00000001;

	ar71xx_add_device_eth(0);

	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
					rb4xx_leds_gpio);

	ar71xx_add_device_gpio_buttons(-1, RB4XX_BUTTONS_POLL_INTERVAL,
					ARRAY_SIZE(rb4xx_gpio_buttons),
					rb4xx_gpio_buttons);

	platform_device_register(&rb4xx_nand_device);

	ar71xx_pci_init(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
}