void W5500Initialze(void)
{
unsigned char temp;
unsigned char W5500FifoSize[2][8] = {{2,2,2,2,2,2,2,2,},{2,2,2,2,2,2,2,2}};
W5500DeSelect();
/* spi function register */
reg_wizchip_spi_cbfunc(W5500ReadByte, W5500WriteByte);
/* CS function register */
reg_wizchip_cs_cbfunc(W5500Select,W5500DeSelect);
if(ctlwizchip(CW_INIT_WIZCHIP,(void*)W5500FifoSize) == -1)
{
printf("W5500 initialized fail.\r\n");
}
do{//check phy status.
if(ctlwizchip(CW_GET_PHYLINK,(void*)&temp) == -1){
printf("Unknown PHY link status.\r\n");
}
}while(temp == PHY_LINK_OFF);
}
void W5500_Init()
{
uint8_t memsize[2][8] = { { 2, 2, 2, 2, 2, 2, 2, 2 }, { 2, 2, 2, 2, 2, 2, 2, 2 } };
Chip_GPIO_SetPinState(LPC_GPIO, 0, 2, true); // SSEL(CS)
Chip_GPIO_SetPinState(LPC_GPIO, 0, 22, false); // N_RESET
delay_cnt(1000);
Chip_GPIO_SetPinState(LPC_GPIO, 0, 22, true); // N_RESET
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_deselect);
reg_wizchip_spi_cbfunc(wizchip_read, wizchip_write);
reg_wizchip_spiburst_cbfunc(wizchip_readburst, wizchip_writeburst);
/* wizchip initialize*/
if (ctlwizchip(CW_INIT_WIZCHIP, (void*) memsize) == -1) {
//printf("WIZCHIP Initialized fail.\r\n");
while (1);
}
/* For Delay */
delay_cnt(10000);
setRCR(3);
}
void ip_init(void){
wiz_NetInfo netInfo;
uint8_t bufSize[] = {2, 2, 2, 2};
reg_wizchip_cs_cbfunc(cs_sel, cs_desel);
reg_wizchip_spi_cbfunc(spi_rb, spi_wb);
wizphy_reset();
wizchip_init(bufSize, bufSize);
memcpy_P(&netInfo, &network_info, sizeof(wiz_NetInfo));
wizchip_setnetinfo(&netInfo);
sock_state=IP_STATE_NO_SOCKET;
}
/*---------------------------------------------------------------------------*/
bool HALW5500_Init(uint8_t *mac)
{
DEBUG("HALW5500: MAC ");
for (uint8_t i = 0; i <= 5; i++)
DEBUG("%02X", mac[i]);
DEBUG("\n");
memset(&netInfo, 0, sizeof(netInfo));
memcpy(netInfo.mac, mac, 6);
HAL_EthReset();
reg_wizchip_cs_cbfunc(HAL_EthCS0, HAL_EthCS1);
reg_wizchip_spi_cbfunc(HALW5500_Read, HALW5500_Write);
uint8_t memsize[2][8] = {{2, 2, 2, 2, 2, 2, 2, 2}, {2, 2, 2, 2, 2, 2, 2, 2}};
return ctlwizchip(CW_INIT_WIZCHIP, (void*) memsize) >= 0;
}
/*JSON{ "type":"staticmethod",
"class" : "WIZnet", "name" : "connect",
"generate" : "jswrap_wiznet_connect",
"description" : "Initialise the WIZnet module and return an Ethernet object",
"params" : [ ],
"return" : ["JsVar", "An Ethernet Object"], "return_object":"Ethernet"
}*/
JsVar *jswrap_wiznet_connect() {
JsVar *ethObj = jspNewObject(0, "Ethernet");
// SPI config
JshSPIInfo inf;
jshSPIInitInfo(&inf);
inf.pinSCK = ETH_CLK_PIN;
inf.pinMISO = ETH_MISO_PIN;
inf.pinMOSI = ETH_MOSI_PIN;
inf.baudRate = 1000000;
inf.spiMode = SPIF_SPI_MODE_0;
jshSPISetup(ETH_SPI, &inf);
// CS Configuration
jshSetPinStateIsManual(ETH_CS_PIN, false);
jshPinOutput(ETH_CS_PIN, 1); // de-assert CS
// Wiznet
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_deselect);
reg_wizchip_spi_cbfunc(wizchip_read, wizchip_write);
/* wizchip initialize*/
uint8_t tmp;
uint8_t memsize[2][8] = { {2,2,2,2,2,2,2,2},{2,2,2,2,2,2,2,2}};
if(ctlwizchip(CW_INIT_WIZCHIP,(void*)memsize) == -1)
{
jsiConsolePrint("WIZCHIP Initialized fail.\r\n");
return 0;
}
/* PHY link status check */
do {
if(ctlwizchip(CW_GET_PHYLINK, (void*)&tmp) == -1) {
jsiConsolePrint("Unknown PHY Link status.\r\n");
return 0;
}
} while (tmp == PHY_LINK_OFF);
JsNetwork net;
networkCreate(&net, JSNETWORKTYPE_W5500);
networkFree(&net);
networkState = NETWORKSTATE_ONLINE;
return ethObj;
}
STATIC void wiznet5k_init(void) {
// SPI configuration
SPI_InitTypeDef *init = &wiznet5k_obj.spi->spi->Init;
init->Mode = SPI_MODE_MASTER;
init->Direction = SPI_DIRECTION_2LINES;
init->DataSize = SPI_DATASIZE_8BIT;
init->CLKPolarity = SPI_POLARITY_LOW; // clock is low when idle
init->CLKPhase = SPI_PHASE_1EDGE; // data latched on first edge, which is rising edge for low-idle
init->NSS = SPI_NSS_SOFT;
init->BaudRatePrescaler = SPI_BAUDRATEPRESCALER_2; // clock freq = f_PCLK / this_prescale_value; Wiz820i can do up to 80MHz
init->FirstBit = SPI_FIRSTBIT_MSB;
init->TIMode = SPI_TIMODE_DISABLED;
init->CRCCalculation = SPI_CRCCALCULATION_DISABLED;
init->CRCPolynomial = 7; // unused
spi_init(wiznet5k_obj.spi, false);
mp_hal_pin_output(wiznet5k_obj.cs);
mp_hal_pin_output(wiznet5k_obj.rst);
// Reset the chip
mp_hal_pin_low(wiznet5k_obj.rst);
mp_hal_delay_ms(1); // datasheet says 2us
mp_hal_pin_high(wiznet5k_obj.rst);
mp_hal_delay_ms(150); // datasheet says 150ms
// Set physical interface callbacks
reg_wizchip_cris_cbfunc(wiz_cris_enter, wiz_cris_exit);
reg_wizchip_cs_cbfunc(wiz_cs_select, wiz_cs_deselect);
reg_wizchip_spi_cbfunc(wiz_spi_read, wiz_spi_write);
// Configure 16k buffers for fast MACRAW
uint8_t sn_size[16] = {16, 0, 0, 0, 0, 0, 0, 0, 16, 0, 0, 0, 0, 0, 0, 0};
ctlwizchip(CW_INIT_WIZCHIP, sn_size);
// Seems we need a small delay after init
mp_hal_delay_ms(250);
// Hook the Wiznet into lwIP
wiznet5k_lwip_init(&wiznet5k_obj);
}
/*
*System initialize
*/
uint8_t wizSystemInit(void)
{
uint8_t W5500SockBufSize[2][8] = {{2,2,2,2,2,2,2,2,},{2,2,2,2,2,2,2,2}};
uint32_t tickStart;
/* spi function register */
reg_wizchip_spi_cbfunc(W5500ReadByte, W5500WriteByte);
/* CS function register */
reg_wizchip_cs_cbfunc(W5500Select, W5500DeSelect);
/* Critical section */
reg_wizchip_cris_cbfunc(spiMutexEnter,spiMutexExit);
//W5500Select();
if(ctlwizchip(CW_INIT_WIZCHIP,(void*)W5500SockBufSize) == -1)
{
#if WIZSYSTEM_DEBUG == 1
printf("W5500 initialized fail.\r\n");
#endif
return -1;
}
/*Set network information by default*/
wizchip_setnetinfo(&NetInfo);
tickStart = HAL_GetTick();
do{//check phy status.
randomKey++;
if((HAL_GetTick() - tickStart) > NETINFO_LINK_TIMEOUT)
{
#if WIZSYSTEM_DEBUG == 1
printf("Ethernet Link timeout.\r\n");
#endif
return -1;
}
}while(!isLinked());
return 1;
}
int main(void)
{
uint8_t tmp=0;
int32_t ret = 0;
uint8_t memsize[2][8] = {{2,2,2,2,2,2,2,2},{2,2,2,2,2,2,2,2}};
uint8_t txsize[8] = {2,2,2,2,2,2,2,2};
uint8_t rxsize[8] = {2,2,2,2,2,2,2,2};
uint8_t pDestaddr[4] = {192,168,0,200};
int8_t num;
uint8_t ping_reply_received = 0;
///////////////////////////////////////////
// Host dependent peripheral initialized //
///////////////////////////////////////////
platform_init();
//////////
// TODO //
////////////////////////////////////////////////////////////////////////////////////////////////////
// First of all, Should register SPI callback functions implemented by user for accessing WIZCHIP //
////////////////////////////////////////////////////////////////////////////////////////////////////
/* Critical section callback - No use in this example */
//reg_wizchip_cris_cbfunc(0, 0);
/* Chip selection call back */
#if _WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_SPI_VDM_
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_deselect);
#elif _WIZCHIP_IO_MODE_ == _WIZCHIP_IO_MODE_SPI_FDM_
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_select); // CS must be tried with LOW.
#else
#if (_WIZCHIP_IO_MODE_ & _WIZCHIP_IO_MODE_SIP_) != _WIZCHIP_IO_MODE_SIP_
#error "Unknown _WIZCHIP_IO_MODE_"
#else
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_deselect);
#endif
#endif
/* SPI Read & Write callback function */
reg_wizchip_spi_cbfunc(wizchip_read, wizchip_write);
////////////////////////////////////////////////////////////////////////
/* WIZCHIP SOCKET Buffer initialize */
wizchip_init(txsize,rxsize);
/* Network initialization */
network_init();
/*******************************/
/* WIZnet W5500 Code Examples */
/* TCPS/UDPS IPRAW test */
/*******************************/
printf("------------PING_TEST_START-----------------------\r\n");
tmp = ping_auto(0,pDestaddr);
//tmp = ping_count(0,3,pDestaddr);
if(tmp == SUCCESS)
printf("-----------PING TEST OK----------\r\n");
else
printf("----------ERROR = %d----------\r\n",tmp);
} // end of main()
/*JSON{
"type" : "staticmethod",
"class" : "WIZnet",
"name" : "connect",
"generate" : "jswrap_wiznet_connect",
"params" : [
["spi", "JsVar", "Device to use for SPI (or undefined to use the default)"],
["cs", "pin", "The pin to use for Chip Select"]
],
"return" : ["JsVar","An Ethernet Object"],
"return_object" : "Ethernet"
}
Initialise the WIZnet module and return an Ethernet object
*/
JsVar *jswrap_wiznet_connect(JsVar *spi, Pin cs) {
IOEventFlags spiDevice;
if (spi) {
spiDevice = jsiGetDeviceFromClass(spi);
if (!DEVICE_IS_SPI(spiDevice)) {
jsExceptionHere(JSET_ERROR, "Expecting SPI device, got %q", spi);
return 0;
}
} else {
// SPI config
JshSPIInfo inf;
jshSPIInitInfo(&inf);
inf.pinSCK = ETH_CLK_PIN;
inf.pinMISO = ETH_MISO_PIN;
inf.pinMOSI = ETH_MOSI_PIN;
inf.baudRate = 1000000;
inf.spiMode = SPIF_SPI_MODE_0;
jshSPISetup(ETH_SPI, &inf);
spiDevice = ETH_SPI;
}
if (!jshIsPinValid(cs))
cs = ETH_CS_PIN;
JsNetwork net;
networkCreate(&net, JSNETWORKTYPE_W5500);
net.data.device = spiDevice;
net.data.pinCS = cs;
networkSet(&net);
JsVar *ethObj = jspNewObject(0, "Ethernet");
// CS Configuration
jshSetPinStateIsManual(net.data.pinCS, false);
jshPinOutput(net.data.pinCS, 1); // de-assert CS
// Initialise WIZnet functions
reg_wizchip_cs_cbfunc(wizchip_select, wizchip_deselect);
reg_wizchip_spi_cbfunc(wizchip_read, wizchip_write);
/* wizchip initialize*/
uint8_t tmp;
uint8_t memsize[2][8] = { {2,2,2,2,2,2,2,2}, {2,2,2,2,2,2,2,2}};
if(ctlwizchip(CW_INIT_WIZCHIP,(void*)memsize) == -1)
{
jsiConsolePrint("WIZnet Initialize failed.\r\n");
networkFree(&net);
return 0;
}
#if _WIZCHIP_ == 5500
/* PHY link status check - W5100 doesn't have this */
do {
if(ctlwizchip(CW_GET_PHYLINK, (void*)&tmp) == -1) {
jsiConsolePrint("Unknown PHY Link status.\r\n");
networkFree(&net);
return 0;
}
} while (tmp == PHY_LINK_OFF);
#endif
networkFree(&net);
networkState = NETWORKSTATE_ONLINE;
return ethObj;
}