PROCESS_THREAD(rest_server_example, ev, data)
{
static struct etimer ds_periodic_timer;
static int ext4=0;
static int ext5=0;
static int ext6=0;
// ext4 = is_button_ext4();
// ext5 = is_button_ext5();
// ext6 = is_button_ext6();
PROCESS_BEGIN();
PRINTF("Starting Erbium Example Server\n");
#ifdef RF_CHANNEL
PRINTF("RF channel: %u\n", RF_CHANNEL);
#endif
#ifdef IEEE802154_PANID
PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID);
#endif
PRINTF("uIP buffer: %u\n", UIP_BUFSIZE);
PRINTF("LL header: %u\n", UIP_LLH_LEN);
PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN);
PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE);
/* if static routes are used rather than RPL */
#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET) && !defined (CONTIKI_TARGET_NATIVE)
set_global_address();
configure_routing();
#endif
/* Initialize the OSD Hardware. */
hw_init();
/* Initialize the REST engine. */
rest_init_engine();
/* Activate the application-specific resources. */
rest_activate_resource(&resource_led1);
rest_activate_resource(&resource_extbutton);
#if REST_RES_INFO
rest_activate_resource(&resource_info);
#endif
/* Activate the application-specific resources. */
#if REST_RES_OPTRIAC
SENSORS_ACTIVATE(optriac_sensor);
rest_activate_resource(&resource_optriac);
#endif
#if defined (PLATFORM_HAS_PIR) && (REST_RES_EVENT)
SENSORS_ACTIVATE(pir_sensor);
rest_activate_event_resource(&resource_pir);
PRINTF("ACTIVATE PIR\n");
#endif
#if defined (PLATFORM_HAS_LEDS)
#if REST_RES_LEDS
rest_activate_resource(&resource_leds);
#endif
#if REST_RES_TOGGLE
rest_activate_resource(&resource_toggle);
#endif
#endif /* PLATFORM_HAS_LEDS */
#if defined (PLATFORM_HAS_TEMPERATURE) && REST_RES_TEMPERATURE
SENSORS_ACTIVATE(temperature_sensor);
rest_activate_resource(&resource_temperature);
#endif
#if defined (PLATFORM_HAS_BATTERY) && REST_RES_BATTERY
SENSORS_ACTIVATE(battery_sensor);
rest_activate_resource(&resource_battery);
#endif
etimer_set(&ds_periodic_timer, MESURE_INTERVAL);
/* Define application-specific events here. */
while(1) {
PROCESS_WAIT_EVENT();
#if defined (REST_RES_EVENT)
if (ev == sensors_event ) {
PRINTF("EVENT\n");
#if (REST_RES_EVENT && defined (PLATFORM_HAS_PIR))
if (data == &pir_sensor) {
PRINTF("PIR EVENT\n");
/* Call the event_handler for this application-specific event. */
pir_event_handler(&resource_pir);
PRINTF("CALL EVENT HANDLER\n");
}
#endif /* PLATFORM_HAS_PIR */
}
#endif /* REST_RES_EVENT */
/* Button Tric Logic */
if(etimer_expired(&ds_periodic_timer)) {
PRINTF("Periodic %d %d\n",ext5,ext6);
if(ext5 != is_button_ext5()) {
ext5 = is_button_ext5();
PRINTF("Toggle Triac A\n");
// Toggle Triac A
if(optriac_sensor.value(OPTRIAC_SENSOR_A) == 0){
optriac_sensor.configure(OPTRIAC_SENSOR_A,1);
led1_on();
}else{
optriac_sensor.configure(OPTRIAC_SENSOR_A,0);
led1_off();
}
}
if(ext6 != is_button_ext6()) {
ext6 = is_button_ext6();
PRINTF("Toggle Triac B\n");
// Toggle Triac B
if(optriac_sensor.value(OPTRIAC_SENSOR_B) == 0){
optriac_sensor.configure(OPTRIAC_SENSOR_B,1);
led2_on();
}else{
optriac_sensor.configure(OPTRIAC_SENSOR_B,0);
led2_off();
}
}
etimer_reset(&ds_periodic_timer);
}
} /* while (1) */
PROCESS_END();
}
PROCESS_THREAD(relay_coap_server, ev, data)
{
PROCESS_BEGIN();
PRINTF("Starting Relay Coap Server\n");
#ifdef RF_CHANNEL
PRINTF("RF channel: %u\n", RF_CHANNEL);
#endif
#ifdef IEEE802154_PANID
PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID);
#endif
PRINTF("uIP buffer: %u\n", UIP_BUFSIZE);
PRINTF("LL header: %u\n", UIP_LLH_LEN);
PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN);
PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE);
/* if static routes are used rather than RPL */
#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET) && !defined (CONTIKI_TARGET_NATIVE)
set_global_address();
configure_routing();
#endif
/* Initialize the REST engine. */
rest_init_engine();
/* Activate the application-specific resources. */
#if REST_RES_HELLO
rest_activate_resource(&resource_helloworld);
#endif
#if REST_RES_MIRROR
rest_activate_resource(&resource_mirror);
#endif
#if REST_RES_CHUNKS
rest_activate_resource(&resource_chunks);
#endif
#if REST_RES_PUSHING
rest_activate_periodic_resource(&periodic_resource_pushing);
#endif
#if defined (PLATFORM_HAS_BUTTON) && REST_RES_EVENT
rest_activate_event_resource(&resource_event);
#endif
#if defined (PLATFORM_HAS_BUTTON) && REST_RES_SEPARATE && WITH_COAP > 3
/* No pre-handler anymore, user coap_separate_accept() and coap_separate_reject(). */
rest_activate_resource(&resource_separate);
#endif
#if defined (PLATFORM_HAS_BUTTON) && (REST_RES_EVENT || (REST_RES_SEPARATE && WITH_COAP > 3))
SENSORS_ACTIVATE(button_sensor);
#endif
#if REST_RES_SUB
rest_activate_resource(&resource_sub);
#endif
#if defined (PLATFORM_HAS_LEDS)
#if REST_RES_LEDS
rest_activate_resource(&resource_leds);
#endif
#if REST_RES_TOGGLE
rest_activate_resource(&resource_toggle);
#endif
#endif /* PLATFORM_HAS_LEDS */
#if defined (PLATFORM_HAS_LIGHT) && REST_RES_LIGHT
SENSORS_ACTIVATE(light_sensor);
rest_activate_resource(&resource_light);
#endif
#if defined (PLATFORM_HAS_BATTERY) && REST_RES_BATTERY
SENSORS_ACTIVATE(battery_sensor);
rest_activate_resource(&resource_battery);
#endif
#if defined (PLATFORM_HAS_RADIO) && REST_RES_RADIO
SENSORS_ACTIVATE(radio_sensor);
rest_activate_resource(&resource_radio);
#endif
#if defined REST_RES_EXTRELAY
relay_enable(0);
rest_activate_resource(&resource_extrelay);
#endif
/* Define application-specific events here. */
while(1) {
PROCESS_WAIT_EVENT();
#if defined (PLATFORM_HAS_BUTTON)
if (ev == sensors_event && data == &button_sensor) {
PRINTF("BUTTON\n");
#if REST_RES_EVENT
/* Call the event_handler for this application-specific event. */
event_event_handler(&resource_event);
#endif
#if REST_RES_SEPARATE && WITH_COAP>3
/* Also call the separate response example handler. */
separate_finalize_handler();
#endif
}
#endif /* PLATFORM_HAS_BUTTON */
} /* while (1) */
PROCESS_END();
}
void CoAPServerImpl::activate(EventResource* resource) {
resource->_resource.handler = handleRequest;
rest_activate_event_resource(&resource->_resource);
}
PROCESS_THREAD(rest_server_example, ev, data)
{
PROCESS_BEGIN();
PRINTF("Starting Erbium Example Server\n");
#ifdef RF_CHANNEL
PRINTF("RF channel: %u\n", RF_CHANNEL);
#endif
#ifdef IEEE802154_PANID
PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID);
#endif
PRINTF("uIP buffer: %u\n", UIP_BUFSIZE);
PRINTF("LL header: %u\n", UIP_LLH_LEN);
PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN);
PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE);
/* if static routes are used rather than RPL */
#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET) && !defined (CONTIKI_TARGET_NATIVE)
set_global_address();
configure_routing();
#endif
/* Initialize the OSD Hardware. */
hw_init();
/* Initialize the REST engine. */
rest_init_engine();
/* Activate the application-specific resources. */
rest_activate_resource(&resource_extbutton);
#if REST_RES_INFO
rest_activate_resource(&resource_info);
#endif
/* Activate the application-specific resources. */
#if defined (REST_RES_EVENT)
// SENSORS_ACTIVATE(reed1_sensor);
rest_activate_event_resource(&resource_reed1);
PRINTF("ACTIVATE REED1\n");
#endif
#if defined (PLATFORM_HAS_LEDS)
#if REST_RES_LEDS
rest_activate_resource(&resource_leds);
#endif
#if REST_RES_TOGGLE
rest_activate_resource(&resource_toggle);
#endif
#endif /* PLATFORM_HAS_LEDS */
#if defined (PLATFORM_HAS_TEMPERATURE) && REST_RES_TEMPERATURE
SENSORS_ACTIVATE(temperature_sensor);
rest_activate_resource(&resource_temperature);
#endif
#if defined (PLATFORM_HAS_BATTERY) && REST_RES_BATTERY
SENSORS_ACTIVATE(battery_sensor);
rest_activate_resource(&resource_battery);
#endif
/* Define application-specific events here. */
while(1) {
PROCESS_WAIT_EVENT();
#if defined (REST_RES_EVENT)
if (ev == sensors_event ) {
PRINTF("EVENT\n");
if (data == &reed1_sensor) {
PRINTF("REED1 EVENT\n");
/* Call the event_handler for this application-specific event. */
reed1_event_handler(&resource_reed1);
PRINTF("CALL EVENT HANDLER\n");
}
}
#endif /* REST_RES_EVENT */
} /* while (1) */
PROCESS_END();
}
PROCESS_THREAD(rest_server_example, ev, data)
{
PROCESS_BEGIN();
PRINTF("Rest Example\n");
#ifdef RF_CHANNEL
PRINTF("RF channel: %u\n", RF_CHANNEL);
#endif
#ifdef IEEE802154_PANID
PRINTF("PAN ID: 0x%04X\n", IEEE802154_PANID);
#endif
PRINTF("uIP buffer: %u\n", UIP_BUFSIZE);
PRINTF("LL header: %u\n", UIP_LLH_LEN);
PRINTF("IP+UDP header: %u\n", UIP_IPUDPH_LEN);
PRINTF("REST max chunk: %u\n", REST_MAX_CHUNK_SIZE);
/* if static routes are used rather than RPL */
#if !UIP_CONF_IPV6_RPL && !defined (CONTIKI_TARGET_MINIMAL_NET)
set_global_address();
configure_routing();
#endif
/* Initialize the REST framework. */
rest_init_framework();
/* Activate the application-specific resources. */
#if REST_RES_HELLO
rest_activate_resource(&resource_helloworld);
#endif
#if REST_RES_MIRROR
rest_activate_resource(&resource_mirror);
#endif
#if REST_RES_CHUNKS
rest_activate_resource(&resource_chunks);
#endif
#if REST_RES_POLLING
rest_activate_periodic_resource(&periodic_resource_polling);
#endif
#if defined (PLATFORM_HAS_BUTTON) && REST_RES_EVENT
SENSORS_ACTIVATE(button_sensor);
rest_activate_event_resource(&resource_event);
#endif
#if defined (PLATFORM_HAS_LEDS)
#if REST_RES_LEDS
rest_activate_resource(&resource_leds);
#endif
#if REST_RES_TOGGLE
rest_activate_resource(&resource_toggle);
#endif
#endif /* PLATFORM_HAS_LEDS */
#if defined (PLATFORM_HAS_LIGHT) && REST_RES_LIGHT
SENSORS_ACTIVATE(light_sensor);
rest_activate_resource(&resource_light);
#endif
#if defined (PLATFORM_HAS_BATTERY) && REST_RES_BATTERY
SENSORS_ACTIVATE(battery_sensor);
rest_activate_resource(&resource_battery);
#endif
/* Define application-specific events here. */
while(1) {
PROCESS_WAIT_EVENT();
#if defined (PLATFORM_HAS_BUTTON) && REST_RES_EVENT
if (ev == sensors_event && data == &button_sensor) {
PRINTF("BUTTON\n");
/* Call the event_handler for this application-specific event. */
event_event_handler(&resource_event);
}
#endif /* PLATFORM_HAS_BUTTON */
} /* while (1) */
PROCESS_END();
}
