int
main (void)
{
/* Initialize GPIO (sets up clock) */
GPIOInit ();
/* Set LED port pin to output */
GPIOSetDir (LED_PORT, LED_BIT, 1);
GPIOSetValue (LED_PORT, LED_BIT, LED_OFF);
/* Init Power Management Routines */
pmu_init ();
/* UART setup */
UARTInit (115200, 0);
/* CDC USB Initialization */
init_usbserial ();
/* Init RFID */
rfid_init ();
/* Init emulation triggers */
trigger_init ();
/* RUN RFID loop */
loop_rfid ();
return 0;
}
static int init()
{
unsigned char buf[0x3f];
int rc;
printf("initializing librfid\n");
rfid_init();
printf("opening reader handle\n");
rh = rfid_reader_open(NULL, RFID_READER_CM5121);
if (!rh) {
fprintf(stderr, "error, no cm5121 handle\n");
return -1;
}
printf("opening layer2 handle\n");
l2h = rfid_layer2_init(rh, RFID_LAYER2_ISO14443A);
//l2h = rfid_layer2_init(rh, RFID_LAYER2_ISO14443B);
if (!l2h) {
fprintf(stderr, "error during iso14443a_init\n");
return -1;
}
//rc632_register_dump(rh->ah, buf);
printf("running layer2 anticol\n");
rc = rfid_layer2_open(l2h);
if (rc < 0) {
fprintf(stderr, "error during layer2_open\n");
return rc;
}
return 0;
}
int main(int argc, char **argv) {
(void) argc;
(void) argv;
check_config();
setbuf(stdout, NULL);
setbuf(stderr, NULL);
log("tuerd (rev " GIT_REV ") starting up");
if(getenv("TUERD_DEBUG"))
debug = 1;
debug("Debugging enabled. This allows people to be tracked!");
// initialize git
git_init();
// initialize nfc
nfc_device *nfc_dev = rfid_init();
if(!nfc_dev)
die("rfid_init failed");
// initialize watchdog handler
struct sigaction sa;
sa.sa_handler = sigalarm;
sigemptyset(&sa.sa_mask);
sa.sa_flags = 0;
sigaction(SIGALRM, &sa, NULL);
while(1) {
debug("-----------------");
debug("waiting for event");
if(!rfid_poll(nfc_dev))
die("rfid_poll failed");
debug("successfully got target");
alarm(10);
if(rfid_authenticate_any(nfc_dev, get_key_git)) {
debug("auth succeeded, opening door");
open_door();
alarm(0);
sleep(10);
} else {
debug("auth failed");
alarm(0);
sleep(1);
}
}
return EXIT_SUCCESS;
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void ICACHE_FLASH_ATTR user_init(void) {
// stdout_init();
rfid_init(RFID_ANY);
system_init_done_cb(user_init_done);
debug("\n\nSDK version: %s\n", system_get_sdk_version());
debug("Firmware: %s\n", config_firmware_bin());
memory_info();
user_config_init();
user_config_load();
user_config_load_private_key();
user_config_load_certificate();
user_events_init();
// Scan
webserver_register_handler_callback(DEVICES_URL, devices_handler);
webserver_register_handler_callback(WIFI_SCAN_URL, wifi_scan_handler);
// Native Devices
user_button_init();
user_relay_init();
user_adc_init();
// UART Devices
mod_rfid_init();
// I2C Devices
i2c_master_gpio_init();
mod_rgb_init();
mod_tc_mk2_init();
mod_io2_init();
mod_irda_init();
// SPI Devices
mod_led_8x8_rgb_init();
webserver_init();
}
void board_init_devices(void) {
#if defined(ENVIRONMENT_SENSOR)
kputs("Initializing i2c\n");
i2c_init();
kputs("Initializing Devices... Light,");
light_init();
#ifdef REPORT_TYPE_GYRO
kputs("Gyro, ");
gyro_init();
#endif
#ifdef REPORT_TYPE_ACCEL
kputs("Accell, ");
accel_init();
#endif
#ifdef REPORT_TYPE_HUMID
kputs("Humid, ");
humid_init();
#endif
kputs("PIR\n");
pir_init();
#elif defined POWER_STRIP_MONITOR
kputs("Initializing Devices... Power\n");
powermon_init();
#endif
#ifdef USE_PN532
kputs("Initializing RFID reader... \n");
rfid_init();
#endif
#ifdef USE_MACHXO2_PMCO2
kputs("Initializing CO2 and PM extension...\n");
machxo2_init();
#endif
#ifdef USE_DOOR_SENSORS
kputs("Initializing Door Sensors...\n");
door_sensors_init();
#endif
}
int main(int argc,char ** argv)
{
RDBG("\n");
rfid_device * rd= rfid_new_device(RFID_READER_HF_READER_ICDREC,RFID_READER_BUS_UART,(void *)argv[1]);
if(rd){
RDBG("\n");
if(rfid_init(rd) != RFID_ESUCCESS) return -1;
rfid_poll_target(rd);
#if 1
mifare_tag tag;
memset(&tag,0,sizeof(mifare_tag));
mifare_get_tag(rd,&tag);
tag.tag.type = MIFARE_CLASSIC_1K;
tag.tag.uid_len =4;
tag.reader_handler = rd;
mifare_classic_register_eeprom_key(&tag,1,MFC_KEY_A,31);
// mifare_classic_deregister_eeprom_key(&tag,1,MFC_KEY_A);
mifare_classic_authenticate(&tag,1,NULL,MFC_KEY_A);
#endif
rfid_deinit(rd);
}
RDBG("\n");
return 0;
}
void sns_rfid_Init(void)
{
rfid_init();
gpio_set_out( sns_rfid_STATUS_LED );
}
/* scan for devices */
RESPONSECODE initLib()
{
RESPONSECODE rv;
rfid_init();
if (reader_init() < 0)
{
Log1(PCSC_LOG_CRITICAL, "reader_init() failed");
return IFD_COMMUNICATION_ERROR;
}
layer2 = RFID_LAYER2_ISO14443A;
protocol = RFID_PROTOCOL_TCL;
/*
if (adapter_id < 0)
{
fprintf(stderr, "couldn't get adapter: error code %d: %s\n",
errno, strerror(errno));
return IFD_COMMUNICATION_ERROR;
}
scan_sock = hci_open_dev(adapter_id);
if (scan_sock < 0)
{
Log1(PCSC_LOG_CRITICAL, "opening socket failed");
return IFD_COMMUNICATION_ERROR;
}
len = 8;
max_rsp = 255;
flags = IREQ_CACHE_FLUSH;
devices = (inquiry_info*) malloc(max_rsp * sizeof(inquiry_info));
// scan
num_rsp = hci_inquiry(adapter_id, len, max_rsp, NULL, &devices, flags);
if (num_rsp < 0)
{
Log1(PCSC_LOG_CRITICAL, "hci_inquiry failed");
return IFD_COMMUNICATION_ERROR;
}
if (num_rsp == 0)
{
Log1(PCSC_LOG_CRITICAL, "no devices found");
return IFD_COMMUNICATION_ERROR;
}
// try to find the service on every device
for (i = 0; i < num_rsp; ++i)
{
ba2str(&(devices + i)->bdaddr, addr);
memset(name, 0, sizeof(name));
if (0 != hci_read_remote_name(scan_sock, &(devices + i)->bdaddr,
sizeof(name), name, 0))
{
strcpy(name, "[unknown]");
}
printf("trying: %s %s\n", addr, name);
// return first found
if (getService(devices->bdaddr) == IFD_SUCCESS)
{
return IFD_SUCCESS;
}
}*/
return IFD_SUCCESS;
}
