static int rpmtsPrepare(rpmts ts)
{
tsMembers tsmem = rpmtsMembers(ts);
rpmtsi pi;
rpmte p;
int rc = 0;
uint64_t fileCount = countFiles(ts);
const char *dbhome = NULL;
struct stat dbstat;
fingerPrintCache fpc = fpCacheCreate(fileCount/2 + 10001, rpmtsPool(ts));
rpmlog(RPMLOG_DEBUG, "computing %" PRIu64 " file fingerprints\n", fileCount);
/* Reset actions, set skip for netshared paths and excluded files */
pi = rpmtsiInit(ts);
while ((p = rpmtsiNext(pi, 0)) != NULL) {
rpmfiles files = rpmteFiles(p);
if (rpmfilesFC(files) > 0) {
rpmfs fs = rpmteGetFileStates(p);
/* Ensure clean state, this could get called more than once. */
rpmfsResetActions(fs);
if (rpmteType(p) == TR_ADDED) {
skipInstallFiles(ts, files, fs);
} else {
skipEraseFiles(ts, files, fs);
}
}
rpmfilesFree(files);
}
rpmtsiFree(pi);
/* Open rpmdb & enter chroot for fingerprinting if necessary */
if (rpmdbOpenAll(ts->rdb) || rpmChrootIn()) {
rc = -1;
goto exit;
}
rpmtsNotify(ts, NULL, RPMCALLBACK_TRANS_START, 6, tsmem->orderCount);
/* Add fingerprint for each file not skipped. */
fpCachePopulate(fpc, ts, fileCount);
/* check against files in the rpmdb */
checkInstalledFiles(ts, fileCount, fpc);
dbhome = rpmdbHome(rpmtsGetRdb(ts));
/* If we can't stat, ignore db growth. Probably not right but... */
if (dbhome && stat(dbhome, &dbstat))
dbhome = NULL;
pi = rpmtsiInit(ts);
while ((p = rpmtsiNext(pi, 0)) != NULL) {
rpmfiles files = rpmteFiles(p);;
if (files == NULL)
continue; /* XXX can't happen */
(void) rpmswEnter(rpmtsOp(ts, RPMTS_OP_FINGERPRINT), 0);
/* check files in ts against each other and update disk space
needs on each partition for this package. */
handleOverlappedFiles(ts, fpc, p, files);
/* Check added package has sufficient space on each partition used. */
if (rpmteType(p) == TR_ADDED) {
/*
* Try to estimate space needed for rpmdb growth: guess that the
* db grows 4 times the header size (indexes and all).
*/
if (dbhome) {
int64_t hsize = rpmteHeaderSize(p) * 4;
rpmtsUpdateDSI(ts, dbstat.st_dev, dbhome,
hsize, 0, 0, FA_CREATE);
}
rpmtsCheckDSIProblems(ts, p);
}
(void) rpmswExit(rpmtsOp(ts, RPMTS_OP_FINGERPRINT), 0);
rpmfilesFree(files);
}
rpmtsiFree(pi);
rpmtsNotify(ts, NULL, RPMCALLBACK_TRANS_STOP, 6, tsmem->orderCount);
/* return from chroot if done earlier */
if (rpmChrootOut())
rc = -1;
/* On actual transaction, file info sets are not needed after this */
if (!(rpmtsFlags(ts) & (RPMTRANS_FLAG_TEST|RPMTRANS_FLAG_BUILD_PROBS))) {
pi = rpmtsiInit(ts);
while ((p = rpmtsiNext(pi, 0)) != NULL) {
rpmteCleanFiles(p);
}
rpmtsiFree(pi);
}
exit:
fpCacheFree(fpc);
rpmtsFreeDSI(ts);
return rc;
}
/* XXX only ts->{probs,di} modified */
static void handleOverlappedFiles(rpmts ts, fingerPrintCache fpc, rpmte p, rpmfiles fi)
{
rpm_loff_t fixupSize = 0;
int i, j;
rpmfs fs = rpmteGetFileStates(p);
rpmfs otherFs;
rpm_count_t fc = rpmfilesFC(fi);
int reportConflicts = !(rpmtsFilterFlags(ts) & RPMPROB_FILTER_REPLACENEWFILES);
fingerPrint * fpList = rpmfilesFps(fi);
for (i = 0; i < fc; i++) {
struct fingerPrint_s * fiFps;
int otherPkgNum, otherFileNum;
rpmfiles otherFi;
rpmte otherTe;
rpmfileAttrs FFlags;
struct rpmffi_s * recs;
int numRecs;
if (XFA_SKIPPING(rpmfsGetAction(fs, i)))
continue;
FFlags = rpmfilesFFlags(fi, i);
fixupSize = 0;
/*
* Retrieve all records that apply to this file. Note that the
* file info records were built in the same order as the packages
* will be installed and removed so the records for an overlapped
* files will be sorted in exactly the same order.
*/
fiFps = fpCacheGetByFp(fpc, fpList, i, &recs, &numRecs);
/*
* If this package is being added, look only at other packages
* being added -- removed packages dance to a different tune.
*
* If both this and the other package are being added, overlapped
* files must be identical (or marked as a conflict). The
* disposition of already installed config files leads to
* a small amount of extra complexity.
*
* If this package is being removed, then there are two cases that
* need to be worried about:
* If the other package is being added, then skip any overlapped files
* so that this package removal doesn't nuke the overlapped files
* that were just installed.
* If both this and the other package are being removed, then each
* file removal from preceding packages needs to be skipped so that
* the file removal occurs only on the last occurrence of an overlapped
* file in the transaction set.
*
*/
/*
* Locate this overlapped file in the set of added/removed packages,
* including the package owning it: a package can have self-conflicting
* files when directory symlinks are present. Don't compare a file
* with itself though...
*/
for (j = 0; j < numRecs && !(recs[j].p == p && recs[j].fileno == i); j++)
{};
/* Find what the previous disposition of this file was. */
otherFileNum = -1; /* keep gcc quiet */
otherFi = NULL;
otherTe = NULL;
otherFs = NULL;
for (otherPkgNum = j - 1; otherPkgNum >= 0; otherPkgNum--) {
otherTe = recs[otherPkgNum].p;
otherFileNum = recs[otherPkgNum].fileno;
otherFs = rpmteGetFileStates(otherTe);
/* Added packages need only look at other added packages. */
if (rpmteType(p) == TR_ADDED && rpmteType(otherTe) != TR_ADDED)
continue;
/* XXX Happens iff fingerprint for incomplete package install. */
if (rpmfsGetAction(otherFs, otherFileNum) != FA_UNKNOWN) {
otherFi = rpmteFiles(otherTe);
break;
}
}
switch (rpmteType(p)) {
case TR_ADDED:
if (otherPkgNum < 0) {
/* XXX is this test still necessary? */
rpmFileAction action;
if (rpmfsGetAction(fs, i) != FA_UNKNOWN)
break;
if (rpmfilesConfigConflict(fi, i)) {
/* Here is a non-overlapped pre-existing config file. */
action = (FFlags & RPMFILE_NOREPLACE) ?
FA_ALTNAME : FA_BACKUP;
} else {
action = FA_CREATE;
}
rpmfsSetAction(fs, i, action);
break;
}
assert(otherFi != NULL);
/* Mark added overlapped non-identical files as a conflict. */
if (rpmfilesCompare(otherFi, otherFileNum, fi, i)) {
int rConflicts;
/* If enabled, resolve colored conflicts to preferred type */
rConflicts = handleColorConflict(ts, fs, fi, i,
otherFs, otherFi, otherFileNum);
if (rConflicts && reportConflicts) {
char *fn = rpmfilesFN(fi, i);
rpmteAddProblem(p, RPMPROB_NEW_FILE_CONFLICT,
rpmteNEVRA(otherTe), fn, 0);
free(fn);
}
} else {
/* Skip create on all but the first instance of a shared file */
rpmFileAction oaction = rpmfsGetAction(otherFs, otherFileNum);
if (oaction != FA_UNKNOWN && !XFA_SKIPPING(oaction)) {
rpmfileAttrs oflags;
/* ...but ghosts aren't really created so... */
oflags = rpmfilesFFlags(otherFi, otherFileNum);
if (!(oflags & RPMFILE_GHOST)) {
rpmfsSetAction(fs, i, FA_SKIP);
}
/* if the other file is color skipped then skip this file too */
} else if (oaction == FA_SKIPCOLOR) {
rpmfsSetAction(fs, i, FA_SKIPCOLOR);
}
}
/* Skipped files dont need fixup size or backups, %config or not */
if (XFA_SKIPPING(rpmfsGetAction(fs, i)))
break;
/* Try to get the disk accounting correct even if a conflict. */
fixupSize = rpmfilesFSize(otherFi, otherFileNum);
if (rpmfilesConfigConflict(fi, i)) {
/* Here is an overlapped pre-existing config file. */
rpmFileAction action;
action = (FFlags & RPMFILE_NOREPLACE) ? FA_ALTNAME : FA_SKIP;
rpmfsSetAction(fs, i, action);
} else {
/* If not decided yet, create it */
if (rpmfsGetAction(fs, i) == FA_UNKNOWN)
rpmfsSetAction(fs, i, FA_CREATE);
}
break;
case TR_REMOVED:
if (otherPkgNum >= 0) {
assert(otherFi != NULL);
/* Here is an overlapped added file we don't want to nuke. */
if (rpmfsGetAction(otherFs, otherFileNum) != FA_ERASE) {
/* On updates, don't remove files. */
rpmfsSetAction(fs, i, FA_SKIP);
break;
}
/* Here is an overlapped removed file: skip in previous. */
rpmfsSetAction(otherFs, otherFileNum, FA_SKIP);
}
if (XFA_SKIPPING(rpmfsGetAction(fs, i)))
break;
if (rpmfilesFState(fi, i) != RPMFILE_STATE_NORMAL)
break;
/* Pre-existing modified config files need to be saved. */
if (rpmfilesConfigConflict(fi, i)) {
rpmfsSetAction(fs, i, FA_SAVE);
break;
}
/* Otherwise, we can just erase. */
rpmfsSetAction(fs, i, FA_ERASE);
break;
}
rpmfilesFree(otherFi);
/* Update disk space info for a file. */
rpmtsUpdateDSI(ts, fpEntryDev(fpc, fiFps), fpEntryDir(fpc, fiFps),
rpmfilesFSize(fi, i), rpmfilesFReplacedSize(fi, i),
fixupSize, rpmfsGetAction(fs, i));
}
}
/* XXX only ts->{probs,di} modified */
static void handleOverlappedFiles(const rpmts ts, const rpmte p, rpmfi fi)
{
rpm_loff_t fixupSize = 0;
rpmps ps;
const char * fn;
int i, j;
rpm_color_t tscolor = rpmtsColor(ts);
rpm_color_t prefcolor = rpmtsPrefColor(ts);
rpmfs fs = rpmteGetFileStates(p);
rpmfs otherFs;
ps = rpmtsProblems(ts);
fi = rpmfiInit(fi, 0);
if (fi != NULL)
while ((i = rpmfiNext(fi)) >= 0) {
rpm_color_t oFColor, FColor;
struct fingerPrint_s * fiFps;
int otherPkgNum, otherFileNum;
rpmfi otherFi;
rpmte otherTe;
rpmfileAttrs FFlags;
rpm_mode_t FMode;
struct rpmffi_s * recs;
int numRecs;
if (XFA_SKIPPING(rpmfsGetAction(fs, i)))
continue;
fn = rpmfiFN(fi);
fiFps = rpmfiFpsIndex(fi, i);
FFlags = rpmfiFFlags(fi);
FMode = rpmfiFMode(fi);
FColor = rpmfiFColor(fi);
FColor &= tscolor;
fixupSize = 0;
/*
* Retrieve all records that apply to this file. Note that the
* file info records were built in the same order as the packages
* will be installed and removed so the records for an overlapped
* files will be sorted in exactly the same order.
*/
(void) rpmFpHashGetEntry(ts->ht, fiFps, &recs, &numRecs, NULL);
/*
* If this package is being added, look only at other packages
* being added -- removed packages dance to a different tune.
*
* If both this and the other package are being added, overlapped
* files must be identical (or marked as a conflict). The
* disposition of already installed config files leads to
* a small amount of extra complexity.
*
* If this package is being removed, then there are two cases that
* need to be worried about:
* If the other package is being added, then skip any overlapped files
* so that this package removal doesn't nuke the overlapped files
* that were just installed.
* If both this and the other package are being removed, then each
* file removal from preceding packages needs to be skipped so that
* the file removal occurs only on the last occurence of an overlapped
* file in the transaction set.
*
*/
/* Locate this overlapped file in the set of added/removed packages. */
for (j = 0; j < numRecs && recs[j].p != p; j++)
{};
/* Find what the previous disposition of this file was. */
otherFileNum = -1; /* keep gcc quiet */
otherFi = NULL;
otherTe = NULL;
otherFs = NULL;
for (otherPkgNum = j - 1; otherPkgNum >= 0; otherPkgNum--) {
otherTe = recs[otherPkgNum].p;
otherFi = rpmteFI(otherTe);
otherFileNum = recs[otherPkgNum].fileno;
otherFs = rpmteGetFileStates(otherTe);
/* Added packages need only look at other added packages. */
if (rpmteType(p) == TR_ADDED && rpmteType(otherTe) != TR_ADDED)
continue;
(void) rpmfiSetFX(otherFi, otherFileNum);
/* XXX Happens iff fingerprint for incomplete package install. */
if (rpmfsGetAction(otherFs, otherFileNum) != FA_UNKNOWN);
break;
}
oFColor = rpmfiFColor(otherFi);
oFColor &= tscolor;
switch (rpmteType(p)) {
case TR_ADDED:
{
int reportConflicts =
!(rpmtsFilterFlags(ts) & RPMPROB_FILTER_REPLACENEWFILES);
int done = 0;
if (otherPkgNum < 0) {
/* XXX is this test still necessary? */
rpmFileAction action;
if (rpmfsGetAction(fs, i) != FA_UNKNOWN)
break;
if (rpmfiConfigConflict(fi)) {
/* Here is a non-overlapped pre-existing config file. */
action = (FFlags & RPMFILE_NOREPLACE) ?
FA_ALTNAME : FA_BACKUP;
} else {
action = FA_CREATE;
}
rpmfsSetAction(fs, i, action);
break;
}
assert(otherFi != NULL);
/* Mark added overlapped non-identical files as a conflict. */
if (rpmfiCompare(otherFi, fi)) {
int rConflicts;
rConflicts = reportConflicts;
/* Resolve file conflicts to prefer Elf64 (if not forced) ... */
if (tscolor != 0) {
if (FColor & prefcolor) {
/* ... last file of preferred colour is installed ... */
if (!XFA_SKIPPING(rpmfsGetAction(fs, i))) {
/* XXX static helpers are order dependent. Ick. */
if (strcmp(fn, "/usr/sbin/libgcc_post_upgrade")
&& strcmp(fn, "/usr/sbin/glibc_post_upgrade"))
rpmfsSetAction(otherFs, otherFileNum, FA_SKIPCOLOR);
}
rpmfsSetAction(fs, i, FA_CREATE);
rConflicts = 0;
} else
if (oFColor & prefcolor) {
/* ... first file of preferred colour is installed ... */
if (XFA_SKIPPING(rpmfsGetAction(fs, i)))
rpmfsSetAction(otherFs, otherFileNum, FA_CREATE);
rpmfsSetAction(fs, i, FA_SKIPCOLOR);
rConflicts = 0;
}
done = 1;
}
if (rConflicts) {
rpmpsAppend(ps, RPMPROB_NEW_FILE_CONFLICT,
rpmteNEVRA(p), rpmteKey(p),
fn, NULL,
rpmteNEVRA(otherTe),
0);
}
}
/* Try to get the disk accounting correct even if a conflict. */
fixupSize = rpmfiFSize(otherFi);
if (rpmfiConfigConflict(fi)) {
/* Here is an overlapped pre-existing config file. */
rpmFileAction action;
action = (FFlags & RPMFILE_NOREPLACE) ? FA_ALTNAME : FA_SKIP;
rpmfsSetAction(fs, i, action);
} else {
if (!done)
rpmfsSetAction(fs, i, FA_CREATE);
}
} break;
case TR_REMOVED:
if (otherPkgNum >= 0) {
assert(otherFi != NULL);
/* Here is an overlapped added file we don't want to nuke. */
if (rpmfsGetAction(otherFs, otherFileNum) != FA_ERASE) {
/* On updates, don't remove files. */
rpmfsSetAction(fs, i, FA_SKIP);
break;
}
/* Here is an overlapped removed file: skip in previous. */
rpmfsSetAction(otherFs, otherFileNum, FA_SKIP);
}
if (XFA_SKIPPING(rpmfsGetAction(fs, i)))
break;
if (rpmfiFState(fi) != RPMFILE_STATE_NORMAL)
break;
if (!(S_ISREG(FMode) && (FFlags & RPMFILE_CONFIG))) {
rpmfsSetAction(fs, i, FA_ERASE);
break;
}
/* Here is a pre-existing modified config file that needs saving. */
{ pgpHashAlgo algo = 0;
size_t diglen = 0;
const unsigned char *digest;
if ((digest = rpmfiFDigest(fi, &algo, &diglen))) {
unsigned char fdigest[diglen];
if (!rpmDoDigest(algo, fn, 0, fdigest, NULL) &&
memcmp(digest, fdigest, diglen)) {
rpmfsSetAction(fs, i, FA_BACKUP);
break;
}
}
}
rpmfsSetAction(fs, i, FA_ERASE);
break;
}
/* Update disk space info for a file. */
rpmtsUpdateDSI(ts, fiFps->entry->dev, rpmfiFSize(fi),
rpmfiFReplacedSize(fi), fixupSize, rpmfsGetAction(fs, i));
}
ps = rpmpsFree(ps);
}