static void __init all5002_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_spi(all5002_spi_slave_info,
ARRAY_SIZE(all5002_spi_slave_info));
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
static void __init rt_g32b_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_spi(rt_g32b_spi_slave_info,
ARRAY_SIZE(rt_g32b_spi_slave_info));
rt305x_register_ethernet();
ramips_register_gpio_buttons(-1, RT_G32B_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(rt_g32b_gpio_buttons),
rt_g32b_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
static void __init dir615h1_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_spi(dir615h1_spi_slave_info,
ARRAY_SIZE(dir615h1_spi_slave_info));
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(dir_615_h1_leds_gpio),
dir_615_h1_leds_gpio);
ramips_register_gpio_buttons(-1, DIR_615_H1_KEYS_POLL_INTERVAL,
ARRAY_SIZE(dir_615_h1_gpio_buttons),
dir_615_h1_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
static void __init all0256n_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_spi(all0256n_spi_slave_info,
ARRAY_SIZE(all0256n_spi_slave_info));
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_NONE;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(all0256n_leds_gpio),
all0256n_leds_gpio);
ramips_register_gpio_buttons(-1, ALL0256N_KEYS_POLL_INTERVAL,
ARRAY_SIZE(all0256n_gpio_buttons),
all0256n_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
}
static void __init wl_330n3g_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_register_spi(wl_330n3g_spi_slave_info,
ARRAY_SIZE(wl_330n3g_spi_slave_info));
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(wl_330n3g_leds_gpio),
wl_330n3g_leds_gpio);
ramips_register_gpio_buttons(-1, WL_330N3G_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wl_330n3g_gpio_buttons),
wl_330n3g_gpio_buttons);
rt305x_register_wifi();
rt305x_register_usb();
rt305x_register_wdt();
}
static void __init nw718_init(void)
{
rt305x_gpio_init(RT305X_GPIO_MODE_I2C |
RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_register_ethernet();
ramips_register_gpio_leds(-1, ARRAY_SIZE(nw718_leds_gpio),
nw718_leds_gpio);
ramips_register_gpio_buttons(-1, NW718_KEYS_POLL_INTERVAL,
ARRAY_SIZE(nw718_gpio_buttons),
nw718_gpio_buttons);
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_spi(nw718_spi_info, ARRAY_SIZE(nw718_spi_info));
rt305x_register_usb();
}
static int __init carambola_register_gpiodev(void)
{
static struct resource res = {
.start = 0xFFFFFFFF,
};
struct platform_device *pdev;
pdev = platform_device_register_simple("GPIODEV", 0, &res, 1);
if (!pdev) {
printk(KERN_ERR "carambole: GPIODEV init failed\n");
return -ENODEV;
}
return 0;
}
static struct i2c_gpio_platform_data carambola_i2c_gpio_data = {
.sda_pin = 1,
.scl_pin = 2,
};
static struct platform_device carambola_i2c_gpio = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &carambola_i2c_gpio_data,
},
};
static struct platform_device *carambola_devices[] __initdata = {
&carambola_i2c_gpio
};
static struct spi_board_info carambola_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 0,
.modalias = "spidev",
}
};
static void __init carambola_init(void)
{
//what you add here means rest of pins will be reserved for other purposes instead of gpios
//rt305x_gpio_init((RT305X_GPIO_MODE_GPIO_UARTF << RT305X_GPIO_MODE_UART0_SHIFT) | //use uartf gpios, i2c and spi
// RT305X_GPIO_MODE_I2C | RT305X_GPIO_MODE_SPI);
rt305x_gpio_init((RT305X_GPIO_MODE_GPIO_UARTF << RT305X_GPIO_MODE_UART0_SHIFT) |
RT305X_GPIO_MODE_I2C);
carambola_register_gpiodev();
platform_add_devices(carambola_devices, ARRAY_SIZE(carambola_devices));
rt305x_register_flash(0, &carambola_flash_data);
rt305x_register_spi(spiflash_spi_slave_info, ARRAY_SIZE(spiflash_spi_slave_info));
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_WLLLL;
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
//rt305x_register_spi(carambola_spi_info, ARRAY_SIZE(carambola_spi_info));
rt305x_register_usb();
}
