static VOID ChipBBPAdjust(RTMP_ADAPTER *pAd)
{
UCHAR rf_bw, ext_ch;
UCHAR bbp_val;
#ifdef DOT11_N_SUPPORT
if (get_ht_cent_ch(pAd, &rf_bw, &ext_ch) == FALSE)
#endif /* DOT11_N_SUPPORT */
{
rf_bw = BW_20;
ext_ch = EXTCHA_NONE;
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
}
rtmp_bbp_set_bw(pAd, rf_bw);
/* TX/RX : control channel setting */
rtmp_mac_set_ctrlch(pAd, ext_ch);
rtmp_bbp_set_ctrlch(pAd, ext_ch);
/* request by Gary 20070208 for middle and long range G Band*/
#ifdef DOT11_N_SUPPORT
if (rf_bw == BW_40)
bbp_val = (pAd->CommonCfg.Channel > 14) ? 0x48 : 0x38;
else
#endif /* DOT11_N_SUPPORT */
bbp_val = (pAd->CommonCfg.Channel > 14) ? 0x40 : 0x38;
rtmp_bbp_set_agc(pAd, bbp_val, RX_CHAIN_ALL);
if (pAd->MACVersion == 0x28600100)
{
#ifdef RT28xx
RT28xx_ch_tunning(pAd, BW_40);
#endif /* RT28xx */
}
else
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x12);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R70, 0x0A);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x10);
}
DBGPRINT(RT_DEBUG_TRACE, ("%s(): BW_%s, ChannelWidth=%d, Channel=%d, ExtChanOffset=%d(%d) \n",
__FUNCTION__, (rf_bw == BW_40 ? "40" : "20"),
pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth,
pAd->CommonCfg.Channel,
pAd->CommonCfg.RegTransmitSetting.field.EXTCHA,
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset));
/* request by Gary 20070208 for middle and long range A Band*/
if (pAd->CommonCfg.Channel > 14)
bbp_val = 0x1D;
else
bbp_val = 0x2D;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R62, 0x2D);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R63, 0x2D);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R64, 0x2D);
/*RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R86, 0x2D);*/
}
INT dev_adjust_radio(RTMP_ADAPTER *pAd)
{
struct hw_setting *hw_cfg = &pAd->hw_cfg, new_cfg;
NdisZeroMemory(&new_cfg, sizeof(struct hw_setting));
/* For all wdev, find the maximum inter-set */
if (hw_cfg->bbp_bw != new_cfg.bbp_bw)
{
rtmp_bbp_set_bw(pAd, new_cfg.bbp_bw);
hw_cfg->bbp_bw = new_cfg.bbp_bw;
}
if (hw_cfg->cent_ch != new_cfg.cent_ch)
{
UCHAR ext_ch = EXTCHA_NONE;
rtmp_bbp_set_ctrlch(pAd, ext_ch);
rtmp_mac_set_ctrlch(pAd, ext_ch);
}
return TRUE;
}
static VOID mt76x0_ate_bbp_adjust(
IN PRTMP_ADAPTER pAd)
{
PATE_INFO pATEInfo = &(pAd->ate);
UCHAR rf_bw, ext_ch = EXTCHA_NONE;
rf_bw = pATEInfo->TxWI.TXWI_N.BW;
rtmp_bbp_set_bw(pAd, rf_bw);
/* Tx/Rx : control channel setting */
rtmp_mac_set_ctrlch(pAd, ext_ch);
ate_bbp_set_ctrlch(pAd, ext_ch);
}
/*========================================================================
Routine Description:
AsicSetChannel -- switch channel , bandwidth and 40MHz above/below setting
Arguments:
ch : Channel number, if 'bw' is BW_40, 'ch' is Center channel [1~14]
bw : Bandwidth [BW_20, BW40]
ext_ch: 11n bandwidth setting [EXTCHA_NONE, EXTCHA_ABOVE, EXTCHA_BELOW]
if 'bw'=BW_20, 'ext_ch' should be EXTCHA_NONE or EXTCHA_ABOVE, these two options have the same effect for BW_20.
if 'bw'=BW_20, 'ext_ch' should not be EXTCHA_BELOW
Return Value: 0 is success
Note:
========================================================================*/
INT AsicSetChannel(UCHAR ch, UCHAR bw, UCHAR ext_ch)
{
BOOLEAN bScan = FALSE;
rtmp_bbp_set_bw(bw);
/* Tx/RX : control channel setting */
/*set band as 40MHz above or Below*/
rtmp_bbp_set_ctrlch(ext_ch);
rtmp_mac_set_ctrlch(ext_ch);
/* Let BBP register at 20MHz to do scan */
AsicSwitchChannel(ch, bScan);
return 0;
}
INT dev_adjust_radio(RTMP_ADAPTER *pAd)
{
struct hw_setting new_cfg, *hw_cfg = &pAd->hw_cfg;
NdisZeroMemory(&new_cfg, sizeof(struct hw_setting));
/* For all wdev, find the maximum inter-set */
if (hw_cfg->bbp_bw != new_cfg.bbp_bw)
{
bbp_set_bw(pAd, new_cfg.bbp_bw);
hw_cfg->bbp_bw = new_cfg.bbp_bw;
}
if (hw_cfg->cent_ch != new_cfg.cent_ch)
{
UINT8 ext_ch = EXTCHA_NONE;
bbp_set_ctrlch(pAd, ext_ch);
#if defined(RTMP_MAC) || defined(RLT_MAC)
if (pAd->chipCap.hif_type == HIF_RTMP || pAd->chipCap.hif_type == HIF_RLT)
rtmp_mac_set_ctrlch(pAd, ext_ch);
#endif /* defined(RTMP_MAC) || defined(RLT_MAC) */
#ifdef MT_MAC
if (pAd->chipCap.hif_type == HIF_MT)
mt_mac_set_ctrlch(pAd, ext_ch);
#endif /* MT_MAC */
}
return TRUE;
}
/*
========================================================================
Routine Description:
Caller ensures we has 802.11n support.
Calls at setting HT from AP/STASetinformation
Arguments:
pAd - Pointer to our adapter
phymode -
========================================================================
*/
VOID RTMPSetHT(
IN RTMP_ADAPTER *pAd,
IN OID_SET_HT_PHYMODE *pHTPhyMode)
{
UCHAR RxStream = pAd->CommonCfg.RxStream;
#ifdef CONFIG_AP_SUPPORT
int apidx;
#endif /* CONFIG_AP_SUPPORT */
int bw;
RT_HT_CAPABILITY *rt_ht_cap = &pAd->CommonCfg.DesiredHtPhy;
HT_CAPABILITY_IE *ht_cap= &pAd->CommonCfg.HtCapability;
#ifdef CONFIG_AP_SUPPORT
/* sanity check for extention channel */
if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
CHANNEL_NO_FAT_BELOW | CHANNEL_NO_FAT_ABOVE) == TRUE)
{
/* only 20MHz is allowed */
pHTPhyMode->BW = 0;
}
else if (pHTPhyMode->ExtOffset == EXTCHA_BELOW)
{
/* extension channel below this channel is not allowed */
if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
CHANNEL_NO_FAT_BELOW) == TRUE)
{
pHTPhyMode->ExtOffset = EXTCHA_ABOVE;
}
}
else if (pHTPhyMode->ExtOffset == EXTCHA_ABOVE)
{
/* extension channel above this channel is not allowed */
if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
CHANNEL_NO_FAT_ABOVE) == TRUE)
{
pHTPhyMode->ExtOffset = EXTCHA_BELOW;
}
}
#endif /* CONFIG_AP_SUPPORT */
DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
pHTPhyMode->MCS, pHTPhyMode->BW,
pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
/* Don't zero supportedHyPhy structure.*/
RTMPZeroMemory(ht_cap, sizeof(HT_CAPABILITY_IE));
RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
RTMPZeroMemory(rt_ht_cap, sizeof(RT_HT_CAPABILITY));
if (pAd->CommonCfg.bRdg)
{
ht_cap->ExtHtCapInfo.PlusHTC = 1;
ht_cap->ExtHtCapInfo.RDGSupport = 1;
}
else
{
ht_cap->ExtHtCapInfo.PlusHTC = 0;
ht_cap->ExtHtCapInfo.RDGSupport = 0;
}
if (RxStream == 1)
{
ht_cap->HtCapParm.MaxRAmpduFactor = 2;
rt_ht_cap->MaxRAmpduFactor = 2;
}
else
{
ht_cap->HtCapParm.MaxRAmpduFactor = 3;
rt_ht_cap->MaxRAmpduFactor = 3;
}
DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
/* Mimo power save, A-MSDU size, */
rt_ht_cap->AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
rt_ht_cap->AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
rt_ht_cap->MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
rt_ht_cap->MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
ht_cap->HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
ht_cap->HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
ht_cap->HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
rt_ht_cap->AmsduSize,
rt_ht_cap->MimoPs,
rt_ht_cap->MpduDensity,
rt_ht_cap->MaxRAmpduFactor));
if(pHTPhyMode->HtMode == HTMODE_GF)
{
ht_cap->HtCapInfo.GF = 1;
rt_ht_cap->GF = 1;
}
else
rt_ht_cap->GF = 0;
/* Decide Rx MCSSet*/
switch (RxStream)
{
case 3:
ht_cap->MCSSet[2] = 0xff;
case 2:
ht_cap->MCSSet[1] = 0xff;
case 1:
default:
ht_cap->MCSSet[0] = 0xff;
break;
}
if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pHTPhyMode->BW == BW_40))
{
pHTPhyMode->BW = BW_20;
ht_cap->HtCapInfo.Forty_Mhz_Intolerant = 1;
}
// TODO: shiang-6590, how about the "bw" when channel 14 for JP region???
bw = BW_20;
if(pHTPhyMode->BW == BW_40)
{
ht_cap->MCSSet[4] = 0x1; /* MCS 32*/
ht_cap->HtCapInfo.ChannelWidth = 1;
if (pAd->CommonCfg.Channel <= 14)
ht_cap->HtCapInfo.CCKmodein40 = 1;
rt_ht_cap->ChannelWidth = 1;
pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
/* Set Regsiter for extension channel position.*/
rtmp_mac_set_ctrlch(pAd, pHTPhyMode->ExtOffset);
/* Turn on BBP 40MHz mode now only as AP . */
/* Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.*/
if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
)
{
rtmp_bbp_set_ctrlch(pAd, pHTPhyMode->ExtOffset);
#ifdef GREENAP_SUPPORT
if (pAd->ApCfg.bGreenAPActive == 1)
bw = BW_20;
else
#endif /* GREENAP_SUPPORT */
bw = BW_40;
}
}
else
{
ht_cap->HtCapInfo.ChannelWidth = 0;
rt_ht_cap->ChannelWidth = 0;
pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
/* Turn on BBP 20MHz mode by request here.*/
bw = BW_20;
}
#ifdef DOT11_VHT_AC
if (pHTPhyMode->BW == BW_40 &&
pAd->CommonCfg.vht_bw == VHT_BW_80 &&
pAd->CommonCfg.vht_cent_ch)
bw = BW_80;
#endif /* DOT11_VHT_AC */
rtmp_bbp_set_bw(pAd, bw);
if(pHTPhyMode->STBC == STBC_USE)
{
if (pAd->Antenna.field.TxPath >= 2)
{
ht_cap->HtCapInfo.TxSTBC = 1;
rt_ht_cap->TxSTBC = 1;
}
else
{
ht_cap->HtCapInfo.TxSTBC = 0;
rt_ht_cap->TxSTBC = 0;
}
/*
RxSTBC
0: not support,
1: support for 1SS
2: support for 1SS, 2SS
3: support for 1SS, 2SS, 3SS
*/
if (pAd->Antenna.field.RxPath >= 1)
{
ht_cap->HtCapInfo.RxSTBC = 1;
rt_ht_cap->RxSTBC = 1;
}
else
{
ht_cap->HtCapInfo.RxSTBC = 0;
rt_ht_cap->RxSTBC = 0;
}
}
else
{
rt_ht_cap->TxSTBC = 0;
rt_ht_cap->RxSTBC = 0;
}
if(pHTPhyMode->SHORTGI == GI_400)
{
ht_cap->HtCapInfo.ShortGIfor20 = 1;
ht_cap->HtCapInfo.ShortGIfor40 = 1;
rt_ht_cap->ShortGIfor20 = 1;
rt_ht_cap->ShortGIfor40 = 1;
}
else
{
ht_cap->HtCapInfo.ShortGIfor20 = 0;
ht_cap->HtCapInfo.ShortGIfor40 = 0;
rt_ht_cap->ShortGIfor20 = 0;
rt_ht_cap->ShortGIfor40 = 0;
}
/* We support link adaptation for unsolicit MCS feedback, set to 2.*/
pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
/* 1, the extension channel above the control channel. */
/* EDCA parameters used for AP's own transmission*/
if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
{
pAd->CommonCfg.APEdcaParm.bValid = TRUE;
pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7;
pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1;
pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1;
pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4;
pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4;
pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3;
pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2;
pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6;
pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10;
pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4;
pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3;
pAd->CommonCfg.APEdcaParm.Txop[0] = 0;
pAd->CommonCfg.APEdcaParm.Txop[1] = 0;
pAd->CommonCfg.APEdcaParm.Txop[2] = 94;
pAd->CommonCfg.APEdcaParm.Txop[3] = 47;
}
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
#ifdef TXBF_SUPPORT
if (pAd->chipCap.FlgHwTxBfCap)
{
/* Set ETxBF */
setETxBFCap(pAd, &ht_cap->TxBFCap);
/* Check ITxBF */
pAd->CommonCfg.RegTransmitSetting.field.ITxBfEn &= rtmp_chk_itxbf_calibration(pAd);
/* Apply to ASIC */
rtmp_asic_set_bf(pAd);
}
#endif /* TXBF_SUPPORT */
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++)
RTMPSetIndividualHT(pAd, apidx);
#ifdef WDS_SUPPORT
for (apidx = 0; apidx < MAX_WDS_ENTRY; apidx++)
RTMPSetIndividualHT(pAd, apidx + MIN_NET_DEVICE_FOR_WDS);
#endif /* WDS_SUPPORT */
#ifdef APCLI_SUPPORT
for (apidx = 0; apidx < MAX_APCLI_NUM; apidx++)
RTMPSetIndividualHT(pAd, apidx + MIN_NET_DEVICE_FOR_APCLI);
#endif /* APCLI_SUPPORT */
}
#endif /* CONFIG_AP_SUPPORT */
}
/*
========================================================================
Routine Description:
Caller ensures we has 802.11n support.
Calls at setting HT from AP/STASetinformation
Arguments:
pAd - Pointer to our adapter
phymode -
========================================================================
*/
VOID RTMPSetHT(
IN RTMP_ADAPTER *pAd,
IN OID_SET_HT_PHYMODE *pHTPhyMode)
{
UCHAR RxStream = pAd->CommonCfg.RxStream;
#ifdef CONFIG_AP_SUPPORT
INT apidx;
#endif /* CONFIG_AP_SUPPORT */
#if defined(RT_CFG80211_SUPPORT) && defined(RT_CFG80211_P2P_CONCURRENT_DEVICE)
BSS_STRUCT *pMbss = &pAd->ApCfg.MBSSID[CFG_GO_BSSID_IDX];
struct wifi_dev *wdev = &pMbss->wdev;
#endif /* defined(RT_CFG80211_SUPPORT) && defined(RT_CFG80211_P2P_CONCURRENT_DEVICE) */
INT bw;
RT_HT_CAPABILITY *rt_ht_cap = &pAd->CommonCfg.DesiredHtPhy;
HT_CAPABILITY_IE *ht_cap= &pAd->CommonCfg.HtCapability;
#ifdef CONFIG_AP_SUPPORT
/* sanity check for extention channel */
if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
CHANNEL_NO_FAT_BELOW | CHANNEL_NO_FAT_ABOVE) == TRUE)
{
/* only 20MHz is allowed */
pHTPhyMode->BW = 0;
}
else if (pHTPhyMode->ExtOffset == EXTCHA_BELOW)
{
/* extension channel below this channel is not allowed */
if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
CHANNEL_NO_FAT_BELOW) == TRUE)
{
pHTPhyMode->ExtOffset = EXTCHA_ABOVE;
}
}
else if (pHTPhyMode->ExtOffset == EXTCHA_ABOVE)
{
/* extension channel above this channel is not allowed */
if (CHAN_PropertyCheck(pAd, pAd->CommonCfg.Channel,
CHANNEL_NO_FAT_ABOVE) == TRUE)
{
pHTPhyMode->ExtOffset = EXTCHA_BELOW;
}
}
#endif /* CONFIG_AP_SUPPORT */
DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n",
pHTPhyMode->HtMode, pHTPhyMode->ExtOffset,
pHTPhyMode->MCS, pHTPhyMode->BW,
pHTPhyMode->STBC, pHTPhyMode->SHORTGI));
/* Don't zero supportedHyPhy structure.*/
RTMPZeroMemory(ht_cap, sizeof(HT_CAPABILITY_IE));
RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo));
RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset));
RTMPZeroMemory(rt_ht_cap, sizeof(RT_HT_CAPABILITY));
if (pAd->CommonCfg.bRdg)
{
ht_cap->ExtHtCapInfo.PlusHTC = 1;
ht_cap->ExtHtCapInfo.RDGSupport = 1;
}
else
{
ht_cap->ExtHtCapInfo.PlusHTC = 0;
ht_cap->ExtHtCapInfo.RDGSupport = 0;
}
ht_cap->HtCapParm.MaxRAmpduFactor = pAd->chipCap.AMPDUFactor;
rt_ht_cap->MaxRAmpduFactor = pAd->chipCap.AMPDUFactor;
DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit));
/* Mimo power save, A-MSDU size, */
rt_ht_cap->AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable;
rt_ht_cap->AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize;
rt_ht_cap->MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode;
rt_ht_cap->MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
ht_cap->HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize;
ht_cap->HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode;
if (pAd->CommonCfg.ht_ldpc && (pAd->chipCap.phy_caps & fPHY_CAP_LDPC))
ht_cap->HtCapInfo.ht_rx_ldpc = 1;
else
ht_cap->HtCapInfo.ht_rx_ldpc = 0;
ht_cap->HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity;
DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n",
rt_ht_cap->AmsduSize,
rt_ht_cap->MimoPs,
rt_ht_cap->MpduDensity,
rt_ht_cap->MaxRAmpduFactor));
if(pHTPhyMode->HtMode == HTMODE_GF)
{
ht_cap->HtCapInfo.GF = 1;
rt_ht_cap->GF = 1;
}
else
rt_ht_cap->GF = 0;
/* Decide Rx MCSSet*/
switch (RxStream)
{
case 3:
ht_cap->MCSSet[2] = 0xff;
case 2:
ht_cap->MCSSet[1] = 0xff;
case 1:
default:
ht_cap->MCSSet[0] = 0xff;
break;
}
#ifdef DOT11N_DRAFT3
if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pHTPhyMode->BW == BW_40))
{
pHTPhyMode->BW = BW_20;
ht_cap->HtCapInfo.Forty_Mhz_Intolerant = 1;
}
#endif /* DOT11N_DRAFT3 */
// TODO: shiang-6590, how about the "bw" when channel 14 for JP region???
//CFG_TODO
bw = BW_20;
if(pHTPhyMode->BW == BW_40)
{
ht_cap->MCSSet[4] = 0x1; /* MCS 32*/
ht_cap->HtCapInfo.ChannelWidth = 1;
if (pAd->CommonCfg.Channel <= 14)
ht_cap->HtCapInfo.CCKmodein40 = 1;
rt_ht_cap->ChannelWidth = 1;
pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE;
/* Set Regsiter for extension channel position.*/
#if defined(RTMP_MAC) || defined(RLT_MAC)
if (pAd->chipCap.hif_type == HIF_RTMP || pAd->chipCap.hif_type == HIF_RLT)
rtmp_mac_set_ctrlch(pAd, pHTPhyMode->ExtOffset);
#endif /* defined(RTMP_MAC) || defined(RLT_MAC) */
#ifdef MT_MAC
if (pAd->chipCap.hif_type == HIF_MT)
mt_mac_set_ctrlch(pAd, pHTPhyMode->ExtOffset);
#endif /* MT_MAC */
/* Turn on BBP 40MHz mode now only as AP . */
/* Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection.*/
if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd)
)
{
bbp_set_ctrlch(pAd, pHTPhyMode->ExtOffset);
#ifdef GREENAP_SUPPORT
if (pAd->ApCfg.bGreenAPActive == 1)
bw = BW_20;
else
#endif /* GREENAP_SUPPORT */
bw = BW_40;
}
}
else
{
ht_cap->HtCapInfo.ChannelWidth = 0;
rt_ht_cap->ChannelWidth = 0;
pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0;
pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE;
pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel;
/* Turn on BBP 20MHz mode by request here.*/
bw = BW_20;
}
#ifdef DOT11_VHT_AC
if (pHTPhyMode->BW == BW_40 &&
pAd->CommonCfg.vht_bw == VHT_BW_80 &&
pAd->CommonCfg.vht_cent_ch)
bw = BW_80;
#endif /* DOT11_VHT_AC */
#if defined(RT_CFG80211_SUPPORT) && defined(RT_CFG80211_P2P_CONCURRENT_DEVICE)
if ((wdev->bw == BW_20) && (wdev->channel != 0))
bbp_set_bw(pAd, wdev->bw);
else if (INFRA_ON(pAd))
bbp_set_bw(pAd, pAd->StaCfg.wdev.bw);
else
#endif /* defined(RT_CFG80211_SUPPORT) && defined(RT_CFG80211_P2P_CONCURRENT_DEVICE) */
bbp_set_bw(pAd, bw);
if(pHTPhyMode->STBC == STBC_USE)
{
if (pAd->Antenna.field.TxPath >= 2)
{
ht_cap->HtCapInfo.TxSTBC = 1;
rt_ht_cap->TxSTBC = 1;
}
else
{
ht_cap->HtCapInfo.TxSTBC = 0;
rt_ht_cap->TxSTBC = 0;
}
/*
RxSTBC
0: not support,
1: support for 1SS
2: support for 1SS, 2SS
3: support for 1SS, 2SS, 3SS
*/
if (pAd->Antenna.field.RxPath >= 1)
{
ht_cap->HtCapInfo.RxSTBC = 1;
rt_ht_cap->RxSTBC = 1;
}
else
{
ht_cap->HtCapInfo.RxSTBC = 0;
rt_ht_cap->RxSTBC = 0;
}
}
else
{
rt_ht_cap->TxSTBC = 0;
rt_ht_cap->RxSTBC = 0;
}
if(pHTPhyMode->SHORTGI == GI_400)
{
ht_cap->HtCapInfo.ShortGIfor20 = 1;
//ht_cap->HtCapInfo.ShortGIfor40 = 1;
rt_ht_cap->ShortGIfor20 = 1;
if(pHTPhyMode->BW == BW_40)
{
ht_cap->HtCapInfo.ShortGIfor40 = 1;
rt_ht_cap->ShortGIfor40 = 1;
}
else
{
ht_cap->HtCapInfo.ShortGIfor40 = 0;
rt_ht_cap->ShortGIfor40 = 0;
}
}
else
{
ht_cap->HtCapInfo.ShortGIfor20 = 0;
ht_cap->HtCapInfo.ShortGIfor40 = 0;
rt_ht_cap->ShortGIfor20 = 0;
rt_ht_cap->ShortGIfor40 = 0;
}
/* We support link adaptation for unsolicit MCS feedback, set to 2.*/
pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel;
/* 1, the extension channel above the control channel. */
/* EDCA parameters used for AP's own transmission*/
if (pAd->CommonCfg.APEdcaParm.bValid == FALSE)
set_default_ap_edca_param(pAd);
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
#ifdef CONFIG_AP_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_AP(pAd)
{
for (apidx = 0; apidx < pAd->ApCfg.BssidNum; apidx++)
RTMPSetIndividualHT(pAd, apidx);
#ifdef WDS_SUPPORT
for (apidx = 0; apidx < MAX_WDS_ENTRY; apidx++)
RTMPSetIndividualHT(pAd, apidx + MIN_NET_DEVICE_FOR_WDS);
#endif /* WDS_SUPPORT */
#ifdef APCLI_SUPPORT
for (apidx = 0; apidx < MAX_APCLI_NUM; apidx++)
RTMPSetIndividualHT(pAd, apidx + MIN_NET_DEVICE_FOR_APCLI);
#endif /* APCLI_SUPPORT */
}
#endif /* CONFIG_AP_SUPPORT */
}