Exemplos de rtw_hal_write_rfreg em C++ (Cpp)

Exemplo n.º 1

Arquivo: rtw_rf.c Projeto: AOSC-Dev/aosc-os-armel-sunxi-boot

void rtw_rf_set_tx_gain_offset(_adapter *adapter, u8 path, s8 offset)
{
	u8 write_value;

	DBG_871X("kfree gain_offset 0x55:0x%x ", rtw_hal_read_rfreg(adapter, path, 0x55, 0xffffffff));
	switch (rtw_get_chip_type(adapter)) {
#ifdef CONFIG_RTL8703B
	case RTL8703B:
		write_value = RF_TX_GAIN_OFFSET_8703B(offset);
		rtw_hal_write_rfreg(adapter, path, 0x55, 0x0fc000, write_value);
		break;
#endif /* CONFIG_RTL8703B */
#ifdef CONFIG_RTL8188F
	case RTL8188F:
		write_value = RF_TX_GAIN_OFFSET_8188F(offset);
		rtw_hal_write_rfreg(adapter, path, 0x55, 0x0fc000, write_value);
		break;
#endif /* CONFIG_RTL8188F */
#ifdef CONFIG_RTL8192E
	case RTL8192E:
		write_value = RF_TX_GAIN_OFFSET_8192E(offset);
		rtw_hal_write_rfreg(adapter, path, 0x55, 0x0f8000, write_value);
		break;
#endif /* CONFIG_RTL8188F */

#ifdef CONFIG_RTL8821A
	case RTL8821:
		write_value = RF_TX_GAIN_OFFSET_8821A(offset);
		rtw_hal_write_rfreg(adapter, path, 0x55, 0x0f8000, write_value);
		break;
#endif /* CONFIG_RTL8821A */
#ifdef CONFIG_RTL8814A
		case RTL8814A:
		DBG_871X("\nkfree by PhyDM on the sw CH. path %d\n", path);
		break;
#endif /* CONFIG_RTL8821A */

	default:
		rtw_warn_on(1);
		break;
	}

	DBG_871X(" after :0x%x\n", rtw_hal_read_rfreg(adapter, path, 0x55, 0xffffffff));
}

Exemplo n.º 2

Arquivo: odm_RegConfig8821A.c Projeto: directhex/rtl8821au-dkms

void odm_ConfigRFReg_8821A(struct rtl_priv *rtlpriv, uint32_t Addr,
	uint32_t Data, enum radio_path path, uint32_t RegAddr)
{
	struct _rtw_hal	*pHalData = GET_HAL_DATA(rtlpriv);
	struct _rtw_dm *	pDM_Odm = &pHalData->odmpriv;

	if (Addr == 0xfe || Addr == 0xffe) {
		msleep(50);
	} else if (Addr == 0xfd) {
		mdelay(5);
	} else if (Addr == 0xfc) {
		mdelay(1);
	} else if (Addr == 0xfb) {
		udelay(50);
	} else if (Addr == 0xfa) {
		udelay(5);
	} else if (Addr == 0xf9) {
		udelay(1);
	} else {
		rtw_hal_write_rfreg(rtlpriv, path, RegAddr, bRFRegOffsetMask, Data);
		/* Add 1us delay between BB/RF register setting. */
		udelay(1);
	}
}

Exemplo n.º 3

Arquivo: rtw_mp.c Projeto: BARBAZ/rtl8188eu

void _write_rfreg(struct adapter *padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val)
{
	rtw_hal_write_rfreg(padapter, (enum rf_radio_path)rfpath, addr, bitmask, val);
}

Exemplo n.º 4

Arquivo: rtw_mp.c Projeto: avila-devlogic/D33_KK_Kernel

void _write_rfreg(PADAPTER padapter, u8 rfpath, u32 addr, u32 bitmask, u32 val)
{
	rtw_hal_write_rfreg(padapter, (RF_RADIO_PATH_E)rfpath, addr, bitmask, val);
}