/*
* rtw_get_cur_max_rate -
* @adapter: pointer to struct adapter structure
*
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(struct adapter *adapter)
{
int i = 0;
u8 *p;
u16 rate = 0, max_rate = 0;
struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
struct registry_priv *pregistrypriv = &adapter->registrypriv;
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
struct wlan_bssid_ex *pcur_bss = &pmlmepriv->cur_network.network;
u8 rf_type = 0;
u8 bw_40MHz = 0, short_GI_20 = 0, short_GI_40 = 0;
u32 ht_ielen = 0;
if (adapter->registrypriv.mp_mode == 1) {
if (check_fwstate(pmlmepriv, WIFI_MP_STATE))
return 0;
}
if ((!check_fwstate(pmlmepriv, _FW_LINKED)) &&
(!check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE)))
return 0;
if (pmlmeext->cur_wireless_mode & (WIRELESS_11_24N|WIRELESS_11_5N)) {
p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12);
if (p && ht_ielen > 0) {
/* cur_bwmod is updated by beacon, pmlmeinfo is updated by association response */
bw_40MHz = (pmlmeext->cur_bwmode && (HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH & pmlmeinfo->HT_info.infos[0])) ? 1 : 0;
short_GI_20 = (le16_to_cpu(pmlmeinfo->HT_caps.cap_info) & IEEE80211_HT_CAP_SGI_20) ? 1 : 0;
short_GI_40 = (le16_to_cpu(pmlmeinfo->HT_caps.cap_info) & IEEE80211_HT_CAP_SGI_40) ? 1 : 0;
rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
max_rate = rtw_mcs_rate(
rf_type,
bw_40MHz & (pregistrypriv->cbw40_enable),
short_GI_20,
short_GI_40,
pmlmeinfo->HT_caps.mcs.rx_mask
);
}
} else {
while ((pcur_bss->SupportedRates[i] != 0) && (pcur_bss->SupportedRates[i] != 0xFF)) {
rate = pcur_bss->SupportedRates[i]&0x7F;
if (rate > max_rate)
max_rate = rate;
i++;
}
max_rate = max_rate*10/2;
}
return max_rate;
}
/*
* rtw_get_cur_max_rate -
* @adapter: pointer to _adapter structure
*
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(_adapter *adapter)
{
int i = 0;
u16 rate = 0, max_rate = 0;
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network;
struct sta_info *psta = NULL;
u8 short_GI=0;
#ifdef CONFIG_80211N_HT
u8 rf_type = 0;
#endif
#ifdef CONFIG_MP_INCLUDED
if (adapter->registrypriv.mp_mode == 1)
{
if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
return 0;
}
#endif
if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE)
&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE))
return 0;
psta = rtw_get_stainfo(&adapter->stapriv, get_bssid(pmlmepriv));
if (psta == NULL)
return 0;
short_GI = query_ra_short_GI(psta);
#ifdef CONFIG_80211N_HT
if (IsSupportedHT(psta->wireless_mode)) {
rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
max_rate = rtw_mcs_rate(
rf_type,
((psta->bw_mode == CHANNEL_WIDTH_40)?1:0),
short_GI,
psta->htpriv.ht_cap.supp_mcs_set
);
}
#ifdef CONFIG_80211AC_VHT
else if (IsSupportedVHT(psta->wireless_mode)) {
max_rate = ((rtw_vht_mcs_to_data_rate(psta->bw_mode, short_GI, pmlmepriv->vhtpriv.vht_highest_rate) + 1) >> 1) * 10;
}
/*
* rtw_get_cur_max_rate -
* @adapter: pointer to _adapter structure
*
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(_adapter *adapter)
{
int i = 0;
u16 rate = 0, max_rate = 0;
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network;
struct sta_info *psta = NULL;
u8 short_GI=0;
u8 rf_type = 0;
if((check_fwstate(pmlmepriv, _FW_LINKED) != true)
&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != true))
return 0;
psta = rtw_get_stainfo(&adapter->stapriv, get_bssid(pmlmepriv));
if (psta == NULL)
return 0;
short_GI = query_ra_short_GI(psta);
if (IsSupportedHT(psta->wireless_mode)) {
rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
max_rate = rtw_mcs_rate(
rf_type,
((psta->bw_mode == CHANNEL_WIDTH_40)?1:0),
short_GI,
psta->htpriv.ht_cap.supp_mcs_set
);
}
else
{
while( (pcur_bss->SupportedRates[i]!=0) && (pcur_bss->SupportedRates[i]!=0xFF))
{
rate = pcur_bss->SupportedRates[i]&0x7F;
if(rate>max_rate)
max_rate = rate;
i++;
}
max_rate = max_rate*10/2;
}
return max_rate;
}
/*
* rtw_get_cur_max_rate -
* @adapter: pointer to _adapter structure
*
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(_adapter *adapter)
{
int i = 0;
u8 *p;
u16 rate = 0, max_rate = 0;
struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
struct registry_priv *pregistrypriv = &adapter->registrypriv;
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network;
#ifdef CONFIG_80211N_HT
struct rtw_ieee80211_ht_cap *pht_capie;
u8 rf_type = 0;
u8 bw_40MHz=0, short_GI_20=0, short_GI_40=0;
u16 mcs_rate=0;
u32 ht_ielen = 0;
#endif
#ifdef CONFIG_MP_INCLUDED
if (adapter->registrypriv.mp_mode == 1)
{
if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
return 0;
}
#endif
if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE)
&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE))
return 0;
#ifdef CONFIG_80211N_HT
if (pmlmeext->cur_wireless_mode & (WIRELESS_11_24N|WIRELESS_11_5N)) {
p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12);
if(p && ht_ielen>0)
{
pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2);
_rtw_memcpy(&mcs_rate , pht_capie->supp_mcs_set, 2);
//bw_40MHz = (pht_capie->cap_info&IEEE80211_HT_CAP_SUP_WIDTH) ? 1:0;
//cur_bwmod is updated by beacon, pmlmeinfo is updated by association response
bw_40MHz = (pmlmeext->cur_bwmode && (HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH & pmlmeinfo->HT_info.infos[0])) ? 1:0;
//short_GI = (pht_capie->cap_info&(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ? 1:0;
short_GI_20 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_20) ? 1:0;
short_GI_40 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_40) ? 1:0;
rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
max_rate = rtw_mcs_rate(
rf_type,
bw_40MHz & (pregistrypriv->cbw40_enable),
short_GI_20,
short_GI_40,
pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate
);
}
}
else
#endif //CONFIG_80211N_HT
{
while( (pcur_bss->SupportedRates[i]!=0) && (pcur_bss->SupportedRates[i]!=0xFF))
{
rate = pcur_bss->SupportedRates[i]&0x7F;
if(rate>max_rate)
max_rate = rate;
i++;
}
max_rate = max_rate*10/2;
}
return max_rate;
}
/*
* rtw_get_cur_max_rate -
* @adapter: pointer to _adapter structure
*
* Return 0 or 100Kbps
*/
u16 rtw_get_cur_max_rate(_adapter *adapter)
{
int i = 0;
u8 *p;
u16 rate = 0, max_rate = 0;
struct mlme_ext_priv *pmlmeext = &adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
struct registry_priv *pregistrypriv = &adapter->registrypriv;
struct mlme_priv *pmlmepriv = &adapter->mlmepriv;
WLAN_BSSID_EX *pcur_bss = &pmlmepriv->cur_network.network;
#ifdef CONFIG_80211N_HT
struct rtw_ieee80211_ht_cap *pht_capie;
u8 rf_type = 0;
u8 bw_40MHz=0, short_GI_20=0, short_GI_40=0, cbw40_enable=0;
u16 mcs_rate=0;
u32 ht_ielen = 0;
#endif
#ifdef CONFIG_80211AC_VHT
struct vht_priv *pvhtpriv = &pmlmepriv->vhtpriv;
#endif
#ifdef CONFIG_MP_INCLUDED
if (adapter->registrypriv.mp_mode == 1)
{
if (check_fwstate(pmlmepriv, WIFI_MP_STATE) == _TRUE)
return 0;
}
#endif
if((check_fwstate(pmlmepriv, _FW_LINKED) != _TRUE)
&& (check_fwstate(pmlmepriv, WIFI_ADHOC_MASTER_STATE) != _TRUE))
return 0;
#ifdef CONFIG_80211N_HT
if (IsSupportedTxHT(pmlmeext->cur_wireless_mode)) {
p = rtw_get_ie(&pcur_bss->IEs[12], _HT_CAPABILITY_IE_, &ht_ielen, pcur_bss->IELength-12);
if(p && ht_ielen>0)
{
pht_capie = (struct rtw_ieee80211_ht_cap *)(p+2);
_rtw_memcpy(&mcs_rate , pht_capie->supp_mcs_set, 2);
//bw_40MHz = (pht_capie->cap_info&IEEE80211_HT_CAP_SUP_WIDTH) ? 1:0;
//cur_bwmod is updated by beacon, pmlmeinfo is updated by association response
bw_40MHz = (pmlmeext->cur_bwmode && (HT_INFO_HT_PARAM_REC_TRANS_CHNL_WIDTH & pmlmeinfo->HT_info.infos[0])) ? 1:0;
//short_GI = (pht_capie->cap_info&(IEEE80211_HT_CAP_SGI_20|IEEE80211_HT_CAP_SGI_40)) ? 1:0;
short_GI_20 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_20) ? 1:0;
short_GI_40 = (pmlmeinfo->HT_caps.u.HT_cap_element.HT_caps_info&IEEE80211_HT_CAP_SGI_40) ? 1:0;
rtw_hal_get_hwreg(adapter, HW_VAR_RF_TYPE, (u8 *)(&rf_type));
if (pmlmeext->cur_channel > 14) {
if ((pregistrypriv->bw_mode & 0xf0) > 0)
cbw40_enable = 1;
} else {
if ((pregistrypriv->bw_mode & 0x0f) > 0)
cbw40_enable = 1;
}
max_rate = rtw_mcs_rate(
rf_type,
bw_40MHz & cbw40_enable,
short_GI_20,
short_GI_40,
pmlmeinfo->HT_caps.u.HT_cap_element.MCS_rate
);
}
}
#ifdef CONFIG_80211AC_VHT
else if (IsSupportedVHT(pmlmeext->cur_wireless_mode)) {
max_rate = ((rtw_vht_data_rate(pvhtpriv->bwmode, pvhtpriv->sgi, pvhtpriv->vht_highest_rate) + 1) >> 1) * 10;
}