Exemplos de rtw_usb_bulk_size_boundary em C++ (Cpp)

Exemplo n.º 1

Arquivo: rtl8812au_xmit.c Projeto: AndyPi/rtl8812au_rtl8821au

static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bagg_pkt)
{	
      int	pull=0;
	uint	qsel;
	u8 data_rate,pwr_status,offset;
	_adapter			*padapter = pxmitframe->padapter;
	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;		
	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	u8	*ptxdesc =  pmem;
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	sint	bmcst = IS_MCAST(pattrib->ra);

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX 
	if (padapter->registrypriv.mp_mode == 0)
	{
		if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE))
		{
			ptxdesc = (pmem+PACKET_OFFSET_SZ);
			//DBG_8192C("==> non-agg-pkt,shift pointer...\n");
			pull = 1;
		}
	}
#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX

	_rtw_memset(ptxdesc, 0, TXDESC_SIZE);
	
        //4 offset 0
	SET_TX_DESC_FIRST_SEG_8812(ptxdesc, 1);
	SET_TX_DESC_LAST_SEG_8812(ptxdesc, 1);
	SET_TX_DESC_OWN_8812(ptxdesc, 1);
		
	//DBG_8192C("%s==> pkt_len=%d,bagg_pkt=%02x\n",__FUNCTION__,sz,bagg_pkt);
	SET_TX_DESC_PKT_SIZE_8812(ptxdesc, sz);
	
	offset = TXDESC_SIZE + OFFSET_SZ;		

#ifdef CONFIG_TX_EARLY_MODE	
	if(bagg_pkt){		
		offset += EARLY_MODE_INFO_SIZE ;//0x28			
	}
#endif
	//DBG_8192C("%s==>offset(0x%02x)  \n",__FUNCTION__,offset);
	SET_TX_DESC_OFFSET_8812(ptxdesc, offset);

	if (bmcst) {
		SET_TX_DESC_BMC_8812(ptxdesc, 1);
	}

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
	if (padapter->registrypriv.mp_mode == 0)
	{
		if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt)){
			if((pull) && (pxmitframe->pkt_offset>0)) {	
				pxmitframe->pkt_offset = pxmitframe->pkt_offset -1;		
			}
		}
	}	
#endif

	//DBG_8192C("%s, pkt_offset=0x%02x\n",__FUNCTION__,pxmitframe->pkt_offset);
	// pkt_offset, unit:8 bytes padding
	if (pxmitframe->pkt_offset > 0) {
		SET_TX_DESC_PKT_OFFSET_8812(ptxdesc, pxmitframe->pkt_offset);
	}

	SET_TX_DESC_MACID_8812(ptxdesc, pattrib->mac_id);
	SET_TX_DESC_RATE_ID_8812(ptxdesc, pattrib->raid);

	SET_TX_DESC_QUEUE_SEL_8812(ptxdesc,  pattrib->qsel);

	//offset 12

	if (!pattrib->qos_en) {
		SET_TX_DESC_HWSEQ_EN_8812(ptxdesc, 1); // Hw set sequence number
	} else {
		SET_TX_DESC_SEQ_8812(ptxdesc, pattrib->seqnum);
	}

	if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");		

		rtl8812a_fill_txdesc_sectype(pattrib, ptxdesc);

		//offset 20
#ifdef CONFIG_USB_TX_AGGREGATION
		if (pxmitframe->agg_num > 1){
			//DBG_8192C("%s agg_num:%d\n",__FUNCTION__,pxmitframe->agg_num );
			SET_TX_DESC_USB_TXAGG_NUM_8812(ptxdesc, pxmitframe->agg_num);
		}
#endif

		rtl8812a_fill_txdesc_vcs(padapter, pattrib, ptxdesc);

		if ((pattrib->ether_type != 0x888e) &&
		    (pattrib->ether_type != 0x0806) &&
		    (pattrib->ether_type != 0x88b4) &&
		    (pattrib->dhcp_pkt != 1)
#ifdef CONFIG_AUTO_AP_MODE
		    && (pattrib->pctrl != _TRUE)
#endif
		)
		{
			//Non EAP & ARP & DHCP type data packet

			if (pattrib->ampdu_en==_TRUE) {
				SET_TX_DESC_AGG_ENABLE_8812(ptxdesc, 1);
				SET_TX_DESC_MAX_AGG_NUM_8812(ptxdesc, 0x1f);
				// Set A-MPDU aggregation.
				SET_TX_DESC_AMPDU_DENSITY_8812(ptxdesc, pattrib->ampdu_spacing);
			} else {
				SET_TX_DESC_AGG_BREAK_8812(ptxdesc, 1);
			}

			rtl8812a_fill_txdesc_phy(padapter, pattrib, ptxdesc);

			//DATA  Rate FB LMT
			SET_TX_DESC_DATA_RATE_FB_LIMIT_8812(ptxdesc, 0x1f);

			if (pHalData->fw_ractrl == _FALSE) {
				SET_TX_DESC_USE_RATE_8812(ptxdesc, 1);
				
				if(pdmpriv->INIDATA_RATE[pattrib->mac_id] & BIT(7))
					SET_TX_DESC_DATA_SHORT_8812(ptxdesc, 	1);

				SET_TX_DESC_TX_RATE_8812(ptxdesc, (pdmpriv->INIDATA_RATE[pattrib->mac_id] & 0x7F));
			}

			if (padapter->fix_rate != 0xFF) { // modify data rate by iwpriv
				SET_TX_DESC_USE_RATE_8812(ptxdesc, 1);
				if(padapter->fix_rate & BIT(7))
					SET_TX_DESC_DATA_SHORT_8812(ptxdesc, 	1);

				SET_TX_DESC_TX_RATE_8812(ptxdesc, (padapter->fix_rate & 0x7F));
				if (!padapter->data_fb)
					SET_TX_DESC_DISABLE_FB_8812(ptxdesc,1);
			}

			if (pattrib->ldpc)
				SET_TX_DESC_DATA_LDPC_8812(ptxdesc, 1);
			if (pattrib->stbc)	
				SET_TX_DESC_DATA_STBC_8812(ptxdesc, 1);
		}
		else
		{
			// EAP data packet and ARP packet and DHCP.
			// Use the 1M data rate to send the EAP/ARP packet.
			// This will maybe make the handshake smooth.

			SET_TX_DESC_USE_RATE_8812(ptxdesc, 1);

			SET_TX_DESC_AGG_BREAK_8812(ptxdesc, 1);

			// HW will ignore this setting if the transmission rate is legacy OFDM.
			if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT) {
				SET_TX_DESC_DATA_SHORT_8812(ptxdesc, 1);
			}

			SET_TX_DESC_TX_RATE_8812(ptxdesc, MRateToHwRate(pmlmeext->tx_rate));
		}

#ifdef CONFIG_TDLS
#ifdef CONFIG_XMIT_ACK
		/* CCX-TXRPT ack for xmit mgmt frames. */
		if (pxmitframe->ack_report) {
			SET_TX_DESC_SPE_RPT_8812(ptxdesc, 1);
			#ifdef DBG_CCX
			DBG_871X("%s set tx report\n", __func__);
			#endif
		}
#endif /* CONFIG_XMIT_ACK */
#endif
	}
	else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n");	

		if(IS_HARDWARE_TYPE_8821(padapter))
			SET_TX_DESC_MBSSID_8821(ptxdesc, pattrib->mbssid);

		SET_TX_DESC_USE_RATE_8812(ptxdesc, 1);

#ifdef CONFIG_INTEL_PROXIM
		if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
			DBG_871X("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
			SET_TX_DESC_TX_RATE_8812(ptxdesc, pattrib->rate);
		}
		else
#endif
		{
			SET_TX_DESC_TX_RATE_8812(ptxdesc, MRateToHwRate(pattrib->rate));
		}

		// VHT NDPA or HT NDPA Packet for Beamformer.
		if((pattrib->subtype == WIFI_NDPA) || 
			((pattrib->subtype == WIFI_ACTION_NOACK) && (pattrib->order == 1)))
		{
			SET_TX_DESC_NAV_USE_HDR_8812(ptxdesc, 1);

			SET_TX_DESC_DATA_BW_8812(ptxdesc, BWMapping_8812(padapter,pattrib));
			SET_TX_DESC_RTS_SC_8812(ptxdesc, SCMapping_8812(padapter,pattrib));

			SET_TX_DESC_RETRY_LIMIT_ENABLE_8812(ptxdesc, 1);
			SET_TX_DESC_DATA_RETRY_LIMIT_8812(ptxdesc, 5);
			SET_TX_DESC_DISABLE_FB_8812(ptxdesc, 1);

			//if(pattrib->rts_cca)
			//{
			//	SET_TX_DESC_NDPA_8812(ptxdesc, 2);
			//}	
			//else
			{
				SET_TX_DESC_NDPA_8812(ptxdesc, 1);
			}
		}
		else
		{
			SET_TX_DESC_RETRY_LIMIT_ENABLE_8812(ptxdesc, 1);
			if (pattrib->retry_ctrl == _TRUE) {
				SET_TX_DESC_DATA_RETRY_LIMIT_8812(ptxdesc, 6);
			} else {
				SET_TX_DESC_DATA_RETRY_LIMIT_8812(ptxdesc, 12);
			}
		}

#ifdef CONFIG_XMIT_ACK
		//CCX-TXRPT ack for xmit mgmt frames.
		if (pxmitframe->ack_report) {
			SET_TX_DESC_SPE_RPT_8812(ptxdesc, 1);
			#ifdef DBG_CCX
			DBG_871X("%s set tx report\n", __func__);
			#endif
		}
#endif //CONFIG_XMIT_ACK
	}
	else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG)
	{
		DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
	}
#ifdef CONFIG_MP_INCLUDED
	else if(((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) &&
		(padapter->registrypriv.mp_mode == 1))
	{
		fill_txdesc_for_mp(padapter, ptxdesc);
	}
#endif
	else
	{
		DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);

		SET_TX_DESC_USE_RATE_8812(ptxdesc, 1);
		SET_TX_DESC_TX_RATE_8812(ptxdesc, MRateToHwRate(pmlmeext->tx_rate));
	}

	rtl8812a_cal_txdesc_chksum(ptxdesc);
	_dbg_dump_tx_info(padapter,pxmitframe->frame_tag,ptxdesc);	
	return pull;
}

Exemplo n.º 2

Arquivo: rtl8192eu_xmit.c Projeto: OpenLD/linux-wetek-3.10.y

static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bagg_pkt)
{
      int	pull=0;
	uint	qsel;
	u8 data_rate,pwr_status,offset;
	_adapter			*padapter = pxmitframe->padapter;
	struct mlme_priv	*pmlmepriv = &padapter->mlmepriv;
	struct pkt_attrib	*pattrib = &pxmitframe->attrib;
	HAL_DATA_TYPE	*pHalData = GET_HAL_DATA(padapter);
	//struct dm_priv	*pdmpriv = &pHalData->dmpriv;
	u8	*ptxdesc =  pmem;
	struct mlme_ext_priv	*pmlmeext = &padapter->mlmeextpriv;
	struct mlme_ext_info	*pmlmeinfo = &(pmlmeext->mlmext_info);
	sint	bmcst = IS_MCAST(pattrib->ra);

#ifdef CONFIG_P2P
	struct wifidirect_info*	pwdinfo = &padapter->wdinfo;
#endif //CONFIG_P2P


#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
	if (padapter->registrypriv.mp_mode == 0)
	{
		//if((!bagg_pkt) &&(urb_zero_packet_chk(padapter, sz)==0))//(sz %512) != 0
		if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt) && (rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE))
		{
			ptxdesc = (pmem+PACKET_OFFSET_SZ);
			//DBG_8192C("==> non-agg-pkt,shift pointer...\n");
			pull = 1;
		}
	}
#endif	// CONFIG_USE_USB_BUFFER_ALLOC_TX

	_rtw_memset(ptxdesc, 0, TXDESC_SIZE);

        //4 offset 0

	//DBG_8192C("%s==> pkt_len=%d,bagg_pkt=%02x\n",__FUNCTION__,sz,bagg_pkt);
	SET_TX_DESC_PKT_SIZE_92E(ptxdesc, sz);

	offset = TXDESC_SIZE + OFFSET_SZ;

#ifdef CONFIG_TX_EARLY_MODE
	if(bagg_pkt){
		offset += EARLY_MODE_INFO_SIZE ;//0x28
	}
#endif
	//DBG_8192C("%s==>offset(0x%02x)  \n",__FUNCTION__,offset);
	SET_TX_DESC_OFFSET_92E(ptxdesc, offset);

	if (bmcst) {
		SET_TX_DESC_BMC_92E(ptxdesc, 1);
	}

#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
	if (padapter->registrypriv.mp_mode == 0)
	{
		if((PACKET_OFFSET_SZ != 0) && (!bagg_pkt)){
			if((pull) && (pxmitframe->pkt_offset>0)) {
				pxmitframe->pkt_offset = pxmitframe->pkt_offset -1;
			}
		}
	}
#endif

	//DBG_8192C("%s, pkt_offset=0x%02x\n",__FUNCTION__,pxmitframe->pkt_offset);
	// pkt_offset, unit:8 bytes padding
	if (pxmitframe->pkt_offset > 0) {
		SET_TX_DESC_PKT_OFFSET_92E(ptxdesc, pxmitframe->pkt_offset);
	}

	SET_TX_DESC_MACID_92E(ptxdesc, pattrib->mac_id);
	SET_TX_DESC_RATE_ID_92E(ptxdesc, pattrib->raid);

	SET_TX_DESC_QUEUE_SEL_92E(ptxdesc,  pattrib->qsel);

	//offset 12

	if (!pattrib->qos_en) {
		SET_TX_DESC_EN_HWSEQ_92E(ptxdesc, 1); // Hw set sequence number
	} else {
		SET_TX_DESC_SEQ_92E(ptxdesc, pattrib->seqnum);
	}

	if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");

		fill_txdesc_sectype(pattrib, ptxdesc);

		if (pattrib->ampdu_en==_TRUE) {
			SET_TX_DESC_AGG_ENABLE_92E(ptxdesc, 1);
			SET_TX_DESC_MAX_AGG_NUM_92E(ptxdesc, 0x1f);
			// Set A-MPDU aggregation.
			SET_TX_DESC_AMPDU_DENSITY_92E(ptxdesc, pHalData->AMPDUDensity);
		} else {
			SET_TX_DESC_BK_92E(ptxdesc, 1);
		}

		//offset 20
#ifdef CONFIG_USB_TX_AGGREGATION
		if (pxmitframe->agg_num > 1){
			//DBG_8192C("%s agg_num:%d\n",__FUNCTION__,pxmitframe->agg_num );
			SET_TX_DESC_USB_TXAGG_NUM_92E(ptxdesc, pxmitframe->agg_num);
		}
#endif

		if ((pattrib->ether_type != 0x888e) &&
		    (pattrib->ether_type != 0x0806) &&
		    (pattrib->ether_type != 0x88b4) &&
		    (pattrib->dhcp_pkt != 1)
#ifdef CONFIG_AUTO_AP_MODE
		    && (pattrib->pctrl != _TRUE)
#endif
		    )
		{
			//Non EAP & ARP & DHCP type data packet

			fill_txdesc_vcs(pattrib, ptxdesc);
			fill_txdesc_phy(padapter, pattrib, ptxdesc);

			SET_TX_DESC_RTS_RATE_92E(ptxdesc, 0x8);//RTS Rate=24M
			//DATA/RTS  Rate FB LMT
			SET_TX_DESC_DATA_RATE_FB_LIMIT_92E(ptxdesc, 0x1f);
			SET_TX_DESC_RTS_RATE_FB_LIMIT_92E(ptxdesc, 0xf);

			if(pHalData->fw_ractrl == _FALSE)  {
				struct dm_priv	*pdmpriv = &pHalData->dmpriv;
				SET_TX_DESC_USE_RATE_92E(ptxdesc, 1);

				if(pdmpriv->INIDATA_RATE[pattrib->mac_id] & BIT(7))
					SET_TX_DESC_DATA_SHORT_92E(ptxdesc, 1);

				SET_TX_DESC_TX_RATE_92E(ptxdesc, (pdmpriv->INIDATA_RATE[pattrib->mac_id] & 0x7F));
			}

			//for debug
		#if 1
			if(padapter->fix_rate!= 0xFF){
				struct dm_priv	*pdmpriv = &pHalData->dmpriv;
				SET_TX_DESC_USE_RATE_92E(ptxdesc, 1);
				//if(pdmpriv->INIDATA_RATE[pattrib->mac_id] & BIT(7))
				{
					if(padapter->fix_rate & BIT(7))
						SET_TX_DESC_DATA_SHORT_92E(ptxdesc, 1);
				}
				SET_TX_DESC_TX_RATE_92E(ptxdesc, (padapter->fix_rate & 0x7F));
				SET_TX_DESC_DISABLE_FB_92E(ptxdesc,1);
				//ptxdesc->datarate = padapter->fix_rate;
			}
			#endif

		}
		else
		{
			// EAP data packet and ARP packet and DHCP.
			// Use the 1M data rate to send the EAP/ARP packet.
			// This will maybe make the handshake smooth.

			SET_TX_DESC_USE_RATE_92E(ptxdesc, 1);

			SET_TX_DESC_BK_92E(ptxdesc, 1);

			// HW will ignore this setting if the transmission rate is legacy OFDM.
			if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT) {
				SET_TX_DESC_DATA_SHORT_92E(ptxdesc, 1);
			}

			SET_TX_DESC_TX_RATE_92E(ptxdesc, MRateToHwRate(pmlmeext->tx_rate));
		}
	}
	else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG)
	{
		//DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n");

		SET_TX_DESC_MBSSID_92E(ptxdesc, pattrib->mbssid);//for issue port1/mbssid beacon

		//offset 20
		SET_TX_DESC_RETRY_LIMIT_ENABLE_92E(ptxdesc, 1);
		if (pattrib->retry_ctrl == _TRUE) {
			SET_TX_DESC_DATA_RETRY_LIMIT_92E(ptxdesc, 6);
		} else {
			SET_TX_DESC_DATA_RETRY_LIMIT_92E(ptxdesc, 12);
		}

		SET_TX_DESC_USE_RATE_92E(ptxdesc, 1);

#ifdef CONFIG_INTEL_PROXIM
		if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
			DBG_871X("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
			SET_TX_DESC_TX_RATE_92E(ptxdesc, pattrib->rate);
		}
		else
#endif
		{
			SET_TX_DESC_TX_RATE_92E(ptxdesc, MRateToHwRate(pmlmeext->tx_rate));
		}
#ifdef CONFIG_XMIT_ACK
		//CCX-TXRPT ack for xmit mgmt frames.
		if (pxmitframe->ack_report) {
			SET_TX_DESC_SPE_RPT_92E(ptxdesc, 1);
			#ifdef DBG_CCX
			DBG_871X("%s set tx report\n", __func__);
			#endif
		}
#endif //CONFIG_XMIT_ACK
	}
	else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG)
	{
		DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
	}
#ifdef CONFIG_MP_INCLUDED
	else if(((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) &&
		(padapter->registrypriv.mp_mode == 1))
	{
		fill_txdesc_for_mp(padapter, ptxdesc);
	}
#endif
	else
	{
		DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);

		SET_TX_DESC_USE_RATE_92E(ptxdesc, 1);
		SET_TX_DESC_TX_RATE_92E(ptxdesc, MRateToHwRate(pmlmeext->tx_rate));
	}

	rtl8192e_cal_txdesc_chksum(ptxdesc);
	_dbg_dump_tx_info(padapter,pxmitframe->frame_tag,ptxdesc);
	return pull;
}