static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
// s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
//jkeqiang
s3c_nand_set_platdata(&ok6410_nand_info);
s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
//gpio_request(S3C64XX_GPN(5), "LCD power");
//gpio_request(S3C64XX_GPF(13), "LCD power");
//gpio_request(S3C64XX_GPF(15), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
s3c_ide_set_platdata(&smdk6410_ide_pdata);
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
}
static void __init mini6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
#ifdef CONFIG_S3C_DEV_I2C1
s3c_i2c1_set_platdata(NULL);
#endif
s3c_fb_set_platdata(&mini6410_lcd_pdata);
#ifdef CONFIG_SAMSUNG_DEV_TS
s3c24xx_ts_set_platdata(&s3c_ts_platform);
#endif
#ifdef CONFIG_TOUCHSCREEN_MINI6410
s3c_ts_set_platdata(&s3c_ts_platform);
#endif
s3c_sdhci0_set_platdata(&mini6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&mini6410_hsmmc1_pdata);
#ifdef CONFIG_MTD_NAND_S3C
s3c_device_nand.name = "s3c6410-nand";
#endif
s3c_nand_set_platdata(&mini6410_nand_info);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPN(5), "LCD power");
gpio_request(S3C64XX_GPF(13), "LCD power");
gpio_request(S3C64XX_GPF(15), "LCD power");
if (ARRAY_SIZE(i2c_devs0)) {
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
}
if (ARRAY_SIZE(i2c_devs1)) {
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
}
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
platform_add_devices(mini6410_devices, ARRAY_SIZE(mini6410_devices));
platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); //GPIO resource MAP
if ((platform_device_register(&mini6410_leds))!=0)
printk( "Failed to register LEDs.\n");
else
printk( "LEDs initialized.\n");
#ifdef CONFIG_VIDEO_SAMSUNG
create_proc_read_entry("videomem", 0, NULL, s3c_media_read_proc, NULL);
#endif
}
static void __init smdk6410_machine_init(void)
{
u32 cs1;
s3c_i2c0_set_platdata(NULL);
//s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
s3c_nand_set_platdata(&ok6410_nand_info); // gjl
s3c_sdhci0_set_platdata(&ok6410_hsmmc0_pdata);
s3c_sdhci1_set_platdata(&ok6410_hsmmc1_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
// s3c24xx_ts_set_platdata(&s3c_ts_platform);
s3c_ts_set_platdata(&s3c_ts_platform);
s3c64xx_ac97_setup_gpio(0);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(0xe << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
//gpio_request(S3C64XX_GPN(5), "LCD power");
//gpio_request(S3C64XX_GPF(13), "LCD power");
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
//s3c_ide_set_platdata(&smdk6410_ide_pdata);
#ifdef CONFIG_S3C64XX_DEV_FIMC0
s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S3C64XX_DEV_FIMC1
s3c_fimc1_set_platdata(NULL);
#endif
s3c64xx_spi_set_info(0,0,3);
s3c64xx_spi_set_info(1,0,2);
//printk(KERN_INFO "SPI: Only Register Bus number 1, spidev for test\n");
spi_register_board_info(forlinx6410_mc251x_info,ARRAY_SIZE(forlinx6410_mc251x_info));
spi_register_board_info(spi_eeprom,ARRAY_SIZE(spi_eeprom));
samsung_keypad_set_platdata(&smdk6410_keypad_data);
platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices));
printk(KERN_INFO "Adding SPI infomation, Check SPI register v10\n");
printk(KERN_INFO "SPI: FPGA initialize....\n");
setup_spi_fpga();
}
