Exemplos de s6e8ax0_power em C++ (Cpp)

Exemplo n.º 1

Arquivo: s3cfb_s6e8aa0a.c Projeto: wogjs2079/android_kernel_samsung_SHV-E220S

void s6e8ax0_early_suspend(void)
{
	struct lcd_info *lcd = g_lcd;

	set_dsim_lcd_enabled(0);

	dev_info(&lcd->ld->dev, "+%s\n", __func__);
#if defined(GPIO_OLED_DET)
	disable_irq(lcd->irq);
	gpio_request(GPIO_OLED_DET, "OLED_DET");
	s3c_gpio_cfgpin(GPIO_OLED_DET, S3C_GPIO_OUTPUT);
	s3c_gpio_setpull(GPIO_OLED_DET, S3C_GPIO_PULL_NONE);
	gpio_direction_output(GPIO_OLED_DET, GPIO_LEVEL_LOW);
	gpio_free(GPIO_OLED_DET);
#endif
#ifdef DDI_STATUS_REG_PREVENTESD
	if (lcd->connected) {
		bool ret;
		ret = cancel_delayed_work(&lcd->check_ddi);
		if (ret)
			printk(KERN_INFO "%s, success - cancel delayed work\n",
				__func__);
	}
#endif
	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
	dev_info(&lcd->ld->dev, "-%s\n", __func__);

	return ;
}

Exemplo n.º 2

Arquivo: s3cfb_s6e8aa0.c Projeto: android-armv7a-belalang-tempur/android_kernel_samsung_smdk4210-1

/* Power down all displays on reboot, poweroff or halt. */
static void s6e8ax0_shutdown(struct device *dev)
{
	struct lcd_info *lcd = dev_get_drvdata(dev);

	dev_info(&lcd->ld->dev, "%s\n", __func__);

	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
}

Exemplo n.º 3

Arquivo: s3cfb_s6e8aa0.c Projeto: android-armv7a-belalang-tempur/android_kernel_samsung_smdk4210-1

static int __devexit s6e8ax0_remove(struct device *dev)
{
	struct lcd_info *lcd = dev_get_drvdata(dev);

	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
	lcd_device_unregister(lcd->ld);
	backlight_device_unregister(lcd->bd);
	kfree(lcd);

	return 0;
}

Exemplo n.º 4

Arquivo: s3cfb_s6e8aa0.c Projeto: android-armv7a-belalang-tempur/android_kernel_samsung_smdk4210-1

static int s6e8ax0_set_power(struct lcd_device *ld, int power)
{
	struct lcd_info *lcd = lcd_get_data(ld);

	if (power != FB_BLANK_UNBLANK && power != FB_BLANK_POWERDOWN &&
		power != FB_BLANK_NORMAL) {
		dev_err(&lcd->ld->dev, "power value should be 0, 1 or 4.\n");
		return -EINVAL;
	}

	return s6e8ax0_power(lcd, power);
}

Exemplo n.º 5

void s6e8ax0_late_resume(void)
{
	struct lcd_info *lcd = g_lcd;

	dev_info(&lcd->ld->dev, "+%s\n", __func__);
	s6e8ax0_power(lcd, FB_BLANK_UNBLANK);
	dev_info(&lcd->ld->dev, "-%s\n", __func__);

	set_dsim_lcd_enabled(1);

	return ;
}

Exemplo n.º 6

void s6e8ax0_early_suspend(void)
{
	struct lcd_info *lcd = g_lcd;

	set_dsim_lcd_enabled(0);

	dev_info(&lcd->ld->dev, "+%s\n", __func__);
	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
	dev_info(&lcd->ld->dev, "-%s\n", __func__);

	return ;
}

Exemplo n.º 7

Arquivo: s3cfb_s6e8aa0.c Projeto: parheliamm/i939u2

/* Power down all displays on reboot, poweroff or halt. */
static void s6e8ax0_shutdown(struct device *dev)
{
	struct lcd_info *lcd = dev_get_drvdata(dev);

	dev_info(&lcd->ld->dev, "%s\n", __func__);
#ifdef CONFIG_FB_S5P_PREVENTESD
	mutex_lock(&s3cfb_lock);
#endif
	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
#ifdef CONFIG_FB_S5P_PREVENTESD
	mutex_unlock(&s3cfb_lock);
#endif
}

Exemplo n.º 8

Arquivo: s3cfb_s6e8aa0.c Projeto: parheliamm/i939u2

static int __devexit s6e8ax0_remove(struct device *dev)
{
	struct lcd_info *lcd = dev_get_drvdata(dev);
#ifdef CONFIG_FB_S5P_PREVENTESD
	mutex_lock(&s3cfb_lock);
#endif
	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
	lcd_device_unregister(lcd->ld);
	backlight_device_unregister(lcd->bd);
	kfree(lcd);
#ifdef CONFIG_FB_S5P_PREVENTESD
	mutex_unlock(&s3cfb_lock);
#endif

	return 0;
}

Exemplo n.º 9

Arquivo: s3cfb_s6e8aa0.c Projeto: android-armv7a-belalang-tempur/android_kernel_samsung_smdk4210-1

void s6e8ax0_late_resume(void)
{
	struct lcd_info *lcd = g_lcd;

	dev_info(&lcd->ld->dev, "+%s\n", __func__);
	s6e8ax0_power(lcd, FB_BLANK_UNBLANK);
#if defined(GPIO_OLED_DET)
	s3c_gpio_cfgpin(GPIO_OLED_DET, S3C_GPIO_SFN(0xf));
	s3c_gpio_setpull(GPIO_OLED_DET, S3C_GPIO_PULL_NONE);
	enable_irq(lcd->irq);
#endif
	dev_info(&lcd->ld->dev, "-%s\n", __func__);

	set_dsim_lcd_enabled(1);

	return ;
}

Exemplo n.º 10

Arquivo: s3cfb_s6e8aa0.c Projeto: android-armv7a-belalang-tempur/android_kernel_samsung_smdk4210-1

void s6e8ax0_early_suspend(void)
{
	struct lcd_info *lcd = g_lcd;

	set_dsim_lcd_enabled(0);

	dev_info(&lcd->ld->dev, "+%s\n", __func__);
#if defined(GPIO_OLED_DET)
	disable_irq(lcd->irq);
	gpio_request(GPIO_OLED_DET, "OLED_DET");
	s3c_gpio_cfgpin(GPIO_OLED_DET, S3C_GPIO_OUTPUT);
	s3c_gpio_setpull(GPIO_OLED_DET, S3C_GPIO_PULL_NONE);
	gpio_direction_output(GPIO_OLED_DET, GPIO_LEVEL_LOW);
	gpio_free(GPIO_OLED_DET);
#endif
	s6e8ax0_power(lcd, FB_BLANK_POWERDOWN);
	dev_info(&lcd->ld->dev, "-%s\n", __func__);

	return ;
}

Exemplo n.º 11

void s6e8ax0_late_resume(void)
{
    struct lcd_info *lcd = g_lcd;

    dev_info(&lcd->ld->dev, "+%s\n", __func__);
    s6e8ax0_power(lcd, FB_BLANK_UNBLANK);
#if defined(GPIO_OLED_DET)
    s3c_gpio_cfgpin(GPIO_OLED_DET, S3C_GPIO_SFN(0xf));
    s3c_gpio_setpull(GPIO_OLED_DET, S3C_GPIO_PULL_NONE);
    enable_irq(lcd->irq);
#endif
#ifdef DDI_STATUS_REG_PREVENTESD
    if (lcd->connected)
        schedule_delayed_work(&lcd->check_ddi, msecs_to_jiffies(3000));
#endif
    dev_info(&lcd->ld->dev, "-%s\n", __func__);

    set_dsim_lcd_enabled(1);

    return ;
}