/**
* @brief This function handles the major job in WLAN driver.
* it handles the event generated by firmware, rx data received
* from firmware and tx data sent from kernel.
*
* @param data A pointer to wlan_thread structure
* @return WLAN_STATUS_SUCCESS
*/
static int
wlan_service_main_thread(void *data)
{
wlan_thread *thread = data;
wlan_private *priv = thread->priv;
wlan_adapter *Adapter = priv->adapter;
wait_queue_t wait;
u8 ireg = 0;
unsigned long driver_flags;
OS_INTERRUPT_SAVE_AREA;
ENTER();
wlan_activate_thread(thread);
init_waitqueue_entry(&wait, current);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
current->flags |= PF_NOFREEZE;
#endif
wlan_meas_init(priv);
PRINTM(INFO, "11H: init 11H\n");
wlan_11h_init(priv);
wmm_init(priv);
for (;;) {
#define MAX_MAIN_THREAD_LOOPS (10000)
if (++Adapter->main_thread_loops > MAX_MAIN_THREAD_LOOPS) {
panic("main-thread dead loop detected: %u\n"
"IntCnt=%d\n"
"Adapter->HisRegCpy=%#x\n"
"CurCmd=%p CmdPending=%s\n"
"Connect=%s\n"
"cmd_sent=%s\n"
"data_sent=%s\n"
"IsDeepSleep=%d\n"
"PSMode=%d PSState=%d\n"
"WakeupDevReq=%d\n"
"HS_Activated=%d\n"
"WakeupTries=%d\n", Adapter->main_thread_loops,
Adapter->IntCounter,
Adapter->HisRegCpy,
Adapter->CurCmd,
list_empty(&Adapter->CmdPendingQ) ? "N" : "Y",
(Adapter->MediaConnectStatus ==
WlanMediaStateConnected) ? "Y" : "N",
(priv->wlan_dev.cmd_sent) ? "TRUE" : "FALSE",
(priv->wlan_dev.data_sent) ? "TRUE" : "FALSE",
Adapter->IsDeepSleep, Adapter->PSMode, Adapter->PSState,
Adapter->bWakeupDevRequired, Adapter->HS_Activated,
Adapter->WakeupTries);
}
add_wait_queue(&thread->waitQ, &wait);
OS_SET_THREAD_STATE(TASK_INTERRUPTIBLE);
TX_DISABLE;
if ((Adapter->WakeupTries) ||
(Adapter->PSState == PS_STATE_SLEEP
&& !Adapter->bWakeupDevRequired) ||
(!Adapter->IntCounter &&
Adapter->PSState == PS_STATE_PRE_SLEEP) ||
(!Adapter->IntCounter
&& (priv->wlan_dev.data_sent || Adapter->TxLockFlag
|| wmm_lists_empty(priv) || wmm_is_queue_stopped(priv))
&& (priv->wlan_dev.cmd_sent || Adapter->CurCmd ||
list_empty(&Adapter->CmdPendingQ))
)
) {
PRINTM(INFO, "main-thread sleeping... "
"HS_Act=%s WakeupReq=%s Conn=%s PS_Mode=%d PS_State=%d\n",
(Adapter->HS_Activated) ? "Y" : "N",
(Adapter->bWakeupDevRequired) ? "Y" : "N",
(Adapter->MediaConnectStatus) ? "Y" : "N",
Adapter->PSMode, Adapter->PSState);
TX_RESTORE;
Adapter->main_thread_loops = 0;
schedule();
PRINTM(INFO, "main-thread waking up: IntCnt=%d "
"CurCmd=%s CmdPending=%s\n"
" Connect=%s "
"cmd_sent=%s data_sent=%s\n",
Adapter->IntCounter,
(Adapter->CurCmd) ? "Y" : "N",
list_empty(&Adapter->CmdPendingQ) ? "N" : "Y",
(Adapter->MediaConnectStatus) ? "Y" : "N",
(priv->wlan_dev.cmd_sent) ? "TRUE" : "FALSE",
(priv->wlan_dev.data_sent) ? "TRUE" : "FALSE");
} else {
TX_RESTORE;
}
OS_SET_THREAD_STATE(TASK_RUNNING);
remove_wait_queue(&thread->waitQ, &wait);
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
if ((thread->state == WLAN_THREAD_STOPPED) || Adapter->SurpriseRemoved)
#else
if (kthread_should_stop() || Adapter->SurpriseRemoved)
#endif
{
PRINTM(INFO, "main-thread: break from main thread: "
"SurpriseRemoved=0x%x\n", Adapter->SurpriseRemoved);
break;
}
if (Adapter->IntCounter) {
OS_INT_DISABLE(priv, driver_flags);
Adapter->IntCounter = 0;
OS_INT_RESTORE(priv, driver_flags);
if (sbi_get_int_status(priv, &ireg)) {
PRINTM(ERROR,
"main-thread: reading HOST_INT_STATUS_REG failed\n");
continue;
}
/* If we have a valid interrupt then we have something to do, so
we are not running in a dead loop */
if (ireg)
Adapter->main_thread_loops = 0;
OS_INT_DISABLE(priv, driver_flags);
Adapter->HisRegCpy |= ireg;
OS_INT_RESTORE(priv, driver_flags);
PRINTM(INTR, "INT: status = 0x%x\n", Adapter->HisRegCpy);
} else if (Adapter->bWakeupDevRequired) {
Adapter->WakeupTries++;
PRINTM(CMND,
"Wakeup device... WakeupReq=%s Conn=%s PS_Mode=%d PS_State=%d @ %lu\n",
(Adapter->bWakeupDevRequired) ? "Y" : "N",
(priv->adapter->MediaConnectStatus) ? "Y" : "N",
priv->adapter->PSMode, priv->adapter->PSState,
os_time_get());
/* Wake up device */
if (sbi_exit_deep_sleep(priv))
PRINTM(MSG, "main-thread: wakeup device failed\n");
continue;
}
/* Command response? */
if (Adapter->HisRegCpy & HIS_CmdUpLdRdy) {
OS_INT_DISABLE(priv, driver_flags);
Adapter->HisRegCpy &= ~HIS_CmdUpLdRdy;
OS_INT_RESTORE(priv, driver_flags);
wlan_process_cmdresp(priv);
}
/* Any Card Event */
if (Adapter->HisRegCpy & HIS_CardEvent) {
OS_INT_DISABLE(priv, driver_flags);
Adapter->HisRegCpy &= ~HIS_CardEvent;
OS_INT_RESTORE(priv, driver_flags);
wlan_process_event(priv);
}
/* Check if we need to confirm Sleep Request received previously */
if (Adapter->PSState == PS_STATE_PRE_SLEEP) {
if (!priv->wlan_dev.cmd_sent && !Adapter->CurCmd) {
ASSERT(Adapter->MediaConnectStatus == WlanMediaStateConnected);
wlan_ps_cond_check(priv, (u16) Adapter->PSMode);
}
}
/* The PS state is changed during processing of Sleep Request event
above */
if ((Adapter->PSState == PS_STATE_SLEEP)
|| (Adapter->PSState == PS_STATE_PRE_SLEEP))
continue;
if (Adapter->IsDeepSleep)
continue;
/* The HS_Activated flag is changed during processing of HS_Activate
command resp */
/* We cannot send command or data if HS_Activated and
WakeupDevRequired are TRUE */
if (Adapter->HS_Activated && Adapter->bWakeupDevRequired) {
PRINTM(INFO, "main-thread: cannot send command or data, "
"HS_Activated=%d\n", Adapter->HS_Activated);
continue;
}
/* Execute the next command */
if (!priv->wlan_dev.cmd_sent && !Adapter->CurCmd)
wlan_exec_next_cmd(priv);
if (!priv->wlan_dev.data_sent
&& !wmm_lists_empty(priv) && !wmm_is_queue_stopped(priv)) {
if ((Adapter->PSState == PS_STATE_FULL_POWER)
|| (Adapter->sleep_period.period == 0)
|| (Adapter->TxLockFlag == FALSE))
wmm_process_tx(priv);
}
}
wlan_deactivate_thread(thread);
LEAVE();
return WLAN_STATUS_SUCCESS;
}
/**
* @brief This function hanldes the major job in WLAN driver.
* it handles the event generated by firmware, rx data received
* from firmware and tx data sent from kernel.
*
* @param data A pointer to wlan_thread structure
* @return WLAN_STATUS_SUCCESS
*/
static void wlan_service_main_thread(cyg_addrword_t data)
{
struct eth_drv_sc *sc = (struct eth_drv_sc *)data;
wlan_private *priv = (wlan_private *)sc->driver_private;
w99702_priv_t * priv702 = priv->priv;
wlan_thread *thread = &priv->MainThread;
wlan_adapter *Adapter = priv->adapter;
//wait_queue_t wait;
cyg_uint8 ireg = 0;
int volatile save_irq;
int x;
int ret;
//OS_INTERRUPT_SAVE_AREA;
ENTER();
wlan_activate_thread(thread);
thread_stop_ptr[0] = NULL;
//init_waitqueue_entry(&wait, current);
for (;;) {
#if 0
diag_printf("main-thread 111: IntCounter=%d "
"CurCmd=%p CmdPending=%s Connect=%d "
"dnld_sent=%d\n",
Adapter->IntCounter,
Adapter->CurCmd,
list_empty(&Adapter->CmdPendingQ) ? "N" : "Y",
Adapter->MediaConnectStatus,
/*Adapter->CurrentTxSkb,*/ priv->wlan_dev.dnld_sent);
#endif
//add_wait_queue(&thread->waitQ, &wait);
//OS_SET_THREAD_STATE(TASK_INTERRUPTIBLE);
TX_DISABLE;
if ((Adapter->WakeupTries) ||
(Adapter->PSState == PS_STATE_SLEEP
&& !Adapter->bWakeupDevRequired) ||
(!Adapter->IntCounter
&& (priv->wlan_dev.dnld_sent || !Adapter->wmm.enabled ||
Adapter->TxLockFlag /*|| !os_queue_is_active(priv)*/ ||
wmm_lists_empty(priv))
&& (priv->wlan_dev.dnld_sent || Adapter->TxLockFlag ||
!Adapter->TxSkbNum)
&& (priv->wlan_dev.dnld_sent || Adapter->CurCmd ||
list_empty(&Adapter->CmdPendingQ))
)
) {
#if 0
diag_printf(
"main-thread sleeping... Conn=%d IntC=%d PS_Mode=%d PS_State=%d\n",
Adapter->MediaConnectStatus, Adapter->IntCounter,
Adapter->PSMode, Adapter->PSState);
#endif
#ifdef _MAINSTONE
MST_LEDDAT1 = get_utimeofday();
#endif
TX_RESTORE;
//schedule();
/* Lock control thread to avoid re-entry when waiting event. ??? */
//cyg_mutex_lock(&thread->waitQ_mutex);
//diag_printf("main_thread wait\n");
/* Waitint until any event input */
x = cyg_flag_wait(
&thread->waitQ_flag_q,
-1,
CYG_FLAG_WAITMODE_OR | CYG_FLAG_WAITMODE_CLR );
//diag_printf("main_thread wakeup %d\n", Adapter->IntCounter);
/* ----------if keypad pressed then print message----------------- */
//if ( 2 & x )
} else {
TX_RESTORE;
}
#if 0
diag_printf(
"main-thread 222 (waking up): IntCounter=%d "
"dnld_sent=%d\n", Adapter->IntCounter, /*Adapter->CurrentTxSkb,*/
priv->wlan_dev.dnld_sent);
//OS_SET_THREAD_STATE(TASK_RUNNING);
//remove_wait_queue(&thread->waitQ, &wait);
diag_printf("main-thread 333: IntCounter=%d "//CurrentTxSkb=%p
"dnld_sent=%d g_NeedWakeupMainThread = %d\n",
Adapter->IntCounter,
/*Adapter->CurrentTxSkb,*/ priv->wlan_dev.dnld_sent, g_WakeupMainThreadStatus);
#endif
if (thread_should_stop()
|| Adapter->SurpriseRemoved) {
diag_printf(
"main-thread: break from main thread: SurpriseRemoved=0x%x\n",
Adapter->SurpriseRemoved);
break;
}
//OS_INT_DISABLE(save_irq);
if(Adapter->IntCounter)
{
Adapter->IntCounter = 0;
if ((ret = sbi_get_int_status(sc, &ireg)) < 0) {
diag_printf("main-thread: reading HOST_INT_STATUS_REG failed\n");
//OS_INT_RESTORE(save_irq);
continue;
}
OS_INT_DISABLE(save_irq);
Adapter->HisRegCpy |= ireg;
OS_INT_RESTORE(save_irq);
}
//else if (Adapter->bWakeupDevRequired && ((Adapter->PSState == PS_STATE_SLEEP)))
else if (Adapter->bWakeupDevRequired && Adapter->HS_Activated) //JONO
{
//OS_INT_RESTORE(save_irq);
Adapter->WakeupTries++;
/* we borrow deep_sleep wakeup code for time being */
if (sbi_exit_deep_sleep(priv))
diag_printf("main-thread: wakeup dev failed\n");
continue;
}
//else OS_INT_RESTORE(save_irq);
#if 0
diag_printf("main-thread 444: IntCounter=%d "// CurrentTxSkb=%p
"dnld_sent=%d TxSkbNum=%d\n",
Adapter->IntCounter,
/*Adapter->CurrentTxSkb,*/ priv->wlan_dev.dnld_sent, Adapter->TxSkbNum);
diag_printf("Adapter->HisRegCpy = %x, %d, %d, %d\n",
Adapter->HisRegCpy, priv->wlan_dev.dnld_sent, Adapter->TxLockFlag, priv->open);
#endif
/* Command response? */
if (Adapter->HisRegCpy & HIS_CmdUpLdRdy) {
//diag_printf("main-thread: Cmd response ready.\n");
OS_INT_DISABLE(save_irq);
Adapter->HisRegCpy &= ~HIS_CmdUpLdRdy;
OS_INT_RESTORE(save_irq);
wlan_process_rx_command(priv);
}
/* Any received data? */
#if 1
if (Adapter->HisRegCpy & HIS_RxUpLdRdy) {
//diag_printf("main-thread: Rx Packet ready.\n");
OS_INT_DISABLE(save_irq);
Adapter->HisRegCpy &= ~HIS_RxUpLdRdy;
OS_INT_RESTORE(save_irq);
//wlan_send_rxskbQ(priv);
if((priv702->rx_head != priv702->rx_tail) || !priv702->rx_head->mode)
eth_drv_dsr(0, 0, (cyg_addrword_t)sc);
}
else
OS_INT_RESTORE(save_irq);
#endif
/* Any Card Event */
if (Adapter->HisRegCpy & HIS_CardEvent) {
//diag_printf("main-thread: Card Event Activity.\n");
OS_INT_DISABLE(save_irq);
Adapter->HisRegCpy &= ~HIS_CardEvent;
OS_INT_RESTORE(save_irq);
if (sbi_read_event_cause(priv)) {
diag_printf("main-thread: sbi_read_event_cause failed.\n");
continue;
}
wlan_process_event(priv);
}
/* Check if we need to confirm Sleep Request received previously */
if (Adapter->PSState == PS_STATE_PRE_SLEEP) {
if (!priv->wlan_dev.dnld_sent && !Adapter->CurCmd) {
if (Adapter->MediaConnectStatus == WlanMediaStateConnected) {
diag_printf(
"main_thread: PRE_SLEEP--IntCounter=%d "// CurrentTxSkb=%p
"dnld_sent=%d CurCmd=%p, confirm now\n",
Adapter->IntCounter, /*Adapter->CurrentTxSkb,*/
priv->wlan_dev.dnld_sent, Adapter->CurCmd);
PSConfirmSleep(priv, (cyg_uint16) Adapter->PSMode);
} else {
/* workaround for firmware sending deauth/linkloss event
immediately after sleep request, remove this after
firmware fixes it */
Adapter->PSState = PS_STATE_AWAKE;
diag_printf(
"main-thread: ignore PS_SleepConfirm in non-connected state\n");
}
}
}
/* The PS state is changed during processing of Sleep Request event above */
if ((priv->adapter->PSState == PS_STATE_SLEEP)
|| (priv->adapter->PSState == PS_STATE_PRE_SLEEP)
) {
diag_printf("999 The PS state is changed during processing ... %d\n", priv->adapter->PSState);
continue; //JONO
}
if (Adapter->HS_Activated && Adapter->bWakeupDevRequired) { //JONO
diag_printf(
"main-thread: cannot send command or date, HS_Activated=%d\n",
Adapter->HS_Activated); //JONO
continue;
}
/* Execute the next command */
if (!priv->wlan_dev.dnld_sent && !Adapter->CurCmd) {
ExecuteNextCommand(priv);
}
if (Adapter->wmm.enabled) {
if (!wmm_lists_empty(priv) && (priv->open == TRUE)/* && os_queue_is_active(priv)*/) {
if ((Adapter->PSState == PS_STATE_FULL_POWER) ||
(Adapter->sleep_period.period == 0)
|| (Adapter->TxLockFlag == FALSE))
//wmm_process_tx(priv);
handle_send(sc);
}
} else {
if (!priv->wlan_dev.dnld_sent && (Adapter->TxLockFlag == false)
&&(priv->open == TRUE)
/*&& !list_empty((struct list_head *) &priv->adapter->TxSkbQ)*/) {
//wlan_process_txqueue(priv);
//diag_printf("send01\n");
handle_send(sc);
//diag_printf("send02\n");
}
}
}
wlan_deactivate_thread(thread);
LEAVE();
return ;//WLAN_STATUS_SUCCESS;
}