int
sdactivate(struct device *self, int act)
{
struct sd_softc *sc = (struct sd_softc *)self;
int rv = 0;
switch (act) {
case DVACT_SUSPEND:
/*
* Stop the disk. Stopping the disk should flush the
* cache, but we are paranoid so we flush the cache
* first.
*/
if ((sc->flags & SDF_DIRTY) != 0)
sd_flush(sc, SCSI_AUTOCONF);
scsi_start(sc->sc_link, SSS_STOP,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF);
break;
case DVACT_RESUME:
scsi_start(sc->sc_link, SSS_START,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF);
break;
case DVACT_DEACTIVATE:
sc->flags |= SDF_DYING;
scsi_xsh_del(&sc->sc_xsh);
break;
}
return (rv);
}
/*
* Close the device. Only called if we are the last occurrence of an open
* device. Convenient now but usually a pain.
*/
int
sdclose(dev_t dev, int flag, int fmt, struct proc *p)
{
struct sd_softc *sc;
int part = DISKPART(dev);
int error;
sc = sdlookup(DISKUNIT(dev));
if (sc == NULL)
return (ENXIO);
if (sc->flags & SDF_DYING) {
device_unref(&sc->sc_dev);
return (ENXIO);
}
if ((error = sdlock(sc)) != 0) {
device_unref(&sc->sc_dev);
return (error);
}
switch (fmt) {
case S_IFCHR:
sc->sc_dk.dk_copenmask &= ~(1 << part);
break;
case S_IFBLK:
sc->sc_dk.dk_bopenmask &= ~(1 << part);
break;
}
sc->sc_dk.dk_openmask = sc->sc_dk.dk_copenmask | sc->sc_dk.dk_bopenmask;
if (sc->sc_dk.dk_openmask == 0) {
if ((sc->flags & SDF_DIRTY) != 0)
sd_flush(sc, 0);
if ((sc->sc_link->flags & SDEV_REMOVABLE) != 0)
scsi_prevent(sc->sc_link, PR_ALLOW,
SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_NOT_READY | SCSI_SILENT);
sc->sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED);
if (sc->sc_link->flags & SDEV_EJECTING) {
scsi_start(sc->sc_link, SSS_STOP|SSS_LOEJ, 0);
sc->sc_link->flags &= ~SDEV_EJECTING;
}
timeout_del(&sc->sc_timeout);
}
sdunlock(sc);
device_unref(&sc->sc_dev);
return 0;
}
int
sdactivate(struct device *self, int act)
{
struct sd_softc *sc = (struct sd_softc *)self;
int rv = 0;
switch (act) {
case DVACT_SUSPEND:
/*
* We flush the cache, since we our next step before
* DVACT_POWERDOWN might be a hibernate operation.
*/
if ((sc->flags & SDF_DIRTY) != 0)
sd_flush(sc, SCSI_AUTOCONF);
break;
case DVACT_POWERDOWN:
/*
* Stop the disk. Stopping the disk should flush the
* cache, but we are paranoid so we flush the cache
* first.
*/
if ((sc->flags & SDF_DIRTY) != 0)
sd_flush(sc, SCSI_AUTOCONF);
if (boothowto & RB_POWERDOWN)
scsi_start(sc->sc_link, SSS_STOP,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF);
break;
case DVACT_RESUME:
scsi_start(sc->sc_link, SSS_START,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF);
break;
case DVACT_DEACTIVATE:
sc->flags |= SDF_DYING;
scsi_xsh_del(&sc->sc_xsh);
break;
}
return (rv);
}
/*
* Close the device. Only called if we are the last occurrence of an open
* device.
*/
int
cdclose(dev_t dev, int flag, int fmt, struct proc *p)
{
struct cd_softc *cd;
int part = DISKPART(dev);
int error;
cd = cdlookup(DISKUNIT(dev));
if (cd == NULL)
return ENXIO;
if ((error = cdlock(cd)) != 0) {
device_unref(&cd->sc_dev);
return error;
}
switch (fmt) {
case S_IFCHR:
cd->sc_dk.dk_copenmask &= ~(1 << part);
break;
case S_IFBLK:
cd->sc_dk.dk_bopenmask &= ~(1 << part);
break;
}
cd->sc_dk.dk_openmask = cd->sc_dk.dk_copenmask | cd->sc_dk.dk_bopenmask;
if (cd->sc_dk.dk_openmask == 0) {
/* XXXX Must wait for I/O to complete! */
scsi_prevent(cd->sc_link, PR_ALLOW,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_NOT_READY |
SCSI_SILENT);
cd->sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED);
if (cd->sc_link->flags & SDEV_EJECTING) {
scsi_start(cd->sc_link, SSS_STOP|SSS_LOEJ, 0);
cd->sc_link->flags &= ~SDEV_EJECTING;
}
timeout_del(&cd->sc_timeout);
}
cdunlock(cd);
device_unref(&cd->sc_dev);
return 0;
}
/*
* Check Errors
*/
int
sd_interpret_sense(struct scsi_xfer *xs)
{
struct scsi_sense_data *sense = &xs->sense;
struct scsi_link *sc_link = xs->sc_link;
struct sd_softc *sc = sc_link->device_softc;
u_int8_t serr = sense->error_code & SSD_ERRCODE;
int retval;
/*
* Let the generic code handle everything except a few categories of
* LUN not ready errors on open devices.
*/
if (((sc_link->flags & SDEV_OPEN) == 0) ||
(serr != SSD_ERRCODE_CURRENT && serr != SSD_ERRCODE_DEFERRED) ||
((sense->flags & SSD_KEY) != SKEY_NOT_READY) ||
(sense->extra_len < 6))
return (scsi_interpret_sense(xs));
switch (ASC_ASCQ(sense)) {
case SENSE_NOT_READY_BECOMING_READY:
SC_DEBUG(sc_link, SDEV_DB1, ("becoming ready.\n"));
retval = scsi_delay(xs, 5);
break;
case SENSE_NOT_READY_INIT_REQUIRED:
SC_DEBUG(sc_link, SDEV_DB1, ("spinning up\n"));
retval = scsi_start(sc->sc_link, SSS_START,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_NOSLEEP);
if (retval == 0)
retval = ERESTART;
else if (retval == ENOMEM)
/* Can't issue the command. Fall back on a delay. */
retval = scsi_delay(xs, 5);
else
SC_DEBUG(sc_link, SDEV_DB1, ("spin up failed (%#x)\n",
retval));
break;
default:
retval = scsi_interpret_sense(xs);
break;
}
return (retval);
}
/*
* Close the device. Only called if we are the last occurrence of an open
* device. Convenient now but usually a pain.
*/
int
sdclose(dev_t dev, int flag, int fmt, struct proc *p)
{
struct sd_softc *sc;
int part = DISKPART(dev);
sc = sdlookup(DISKUNIT(dev));
if (sc == NULL)
return (ENXIO);
if (sc->flags & SDF_DYING) {
device_unref(&sc->sc_dev);
return (ENXIO);
}
disk_lock_nointr(&sc->sc_dk);
disk_closepart(&sc->sc_dk, part, fmt);
if (sc->sc_dk.dk_openmask == 0) {
if ((sc->flags & SDF_DIRTY) != 0)
sd_flush(sc, 0);
if ((sc->sc_link->flags & SDEV_REMOVABLE) != 0)
scsi_prevent(sc->sc_link, PR_ALLOW,
SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_NOT_READY | SCSI_SILENT);
sc->sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED);
if (sc->sc_link->flags & SDEV_EJECTING) {
scsi_start(sc->sc_link, SSS_STOP|SSS_LOEJ, 0);
sc->sc_link->flags &= ~SDEV_EJECTING;
}
timeout_del(&sc->sc_timeout);
scsi_xsh_del(&sc->sc_xsh);
}
disk_unlock(&sc->sc_dk);
device_unref(&sc->sc_dev);
return 0;
}
void
sd_shutdown(void *arg)
{
struct sd_softc *sc = (struct sd_softc *)arg;
/*
* If the disk cache needs to be flushed, and the disk supports
* it, flush it. We're cold at this point, so we poll for
* completion.
*/
if ((sc->flags & SDF_DIRTY) != 0)
sd_flush(sc, SCSI_AUTOCONF);
if (boothowto & RB_POWERDOWN)
scsi_start(sc->sc_link, SSS_STOP,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_AUTOCONF);
/*
* There should be no outstanding IO at this point, but lets stop
* it just in case.
*/
timeout_del(&sc->sc_timeout);
scsi_xsh_del(&sc->sc_xsh);
}
/*
* Perform special action on behalf of the user.
* Knows about the internals of this device
*/
int
cdioctl(dev_t dev, u_long cmd, caddr_t addr, int flag, struct proc *p)
{
struct cd_softc *cd;
struct disklabel *lp;
int part = DISKPART(dev);
int error = 0;
cd = cdlookup(DISKUNIT(dev));
if (cd == NULL)
return ENXIO;
SC_DEBUG(cd->sc_link, SDEV_DB2, ("cdioctl 0x%lx\n", cmd));
/*
* If the device is not valid.. abandon ship
*/
if ((cd->sc_link->flags & SDEV_MEDIA_LOADED) == 0) {
switch (cmd) {
case DIOCWLABEL:
case DIOCLOCK:
case DIOCEJECT:
case SCIOCIDENTIFY:
case SCIOCCOMMAND:
case SCIOCDEBUG:
case CDIOCLOADUNLOAD:
case SCIOCRESET:
case CDIOCGETVOL:
case CDIOCSETVOL:
case CDIOCSETMONO:
case CDIOCSETSTEREO:
case CDIOCSETMUTE:
case CDIOCSETLEFT:
case CDIOCSETRIGHT:
case CDIOCCLOSE:
case CDIOCEJECT:
case CDIOCALLOW:
case CDIOCPREVENT:
case CDIOCSETDEBUG:
case CDIOCCLRDEBUG:
case CDIOCRESET:
case DVD_AUTH:
case DVD_READ_STRUCT:
case MTIOCTOP:
if (part == RAW_PART)
break;
/* FALLTHROUGH */
default:
if ((cd->sc_link->flags & SDEV_OPEN) == 0)
error = ENODEV;
else
error = EIO;
goto exit;
}
}
switch (cmd) {
case DIOCRLDINFO:
lp = malloc(sizeof(*lp), M_TEMP, M_WAITOK);
cdgetdisklabel(dev, cd, lp, 0);
bcopy(lp, cd->sc_dk.dk_label, sizeof(*lp));
free(lp, M_TEMP);
break;
case DIOCGDINFO:
case DIOCGPDINFO:
*(struct disklabel *)addr = *(cd->sc_dk.dk_label);
break;
case DIOCGPART:
((struct partinfo *)addr)->disklab = cd->sc_dk.dk_label;
((struct partinfo *)addr)->part =
&cd->sc_dk.dk_label->d_partitions[DISKPART(dev)];
break;
case DIOCWDINFO:
case DIOCSDINFO:
if ((flag & FWRITE) == 0) {
error = EBADF;
break;
}
if ((error = cdlock(cd)) != 0)
break;
cd->flags |= CDF_LABELLING;
error = setdisklabel(cd->sc_dk.dk_label,
(struct disklabel *)addr, /*cd->sc_dk.dk_openmask : */0);
if (error == 0) {
}
cd->flags &= ~CDF_LABELLING;
cdunlock(cd);
break;
case DIOCWLABEL:
error = EBADF;
break;
case CDIOCPLAYTRACKS: {
struct ioc_play_track *args = (struct ioc_play_track *)addr;
if ((error = cd_set_pa_immed(cd, 0)) != 0)
break;
error = cd_play_tracks(cd, args->start_track,
args->start_index, args->end_track, args->end_index);
break;
}
case CDIOCPLAYMSF: {
struct ioc_play_msf *args = (struct ioc_play_msf *)addr;
if ((error = cd_set_pa_immed(cd, 0)) != 0)
break;
error = cd_play_msf(cd, args->start_m, args->start_s,
args->start_f, args->end_m, args->end_s, args->end_f);
break;
}
case CDIOCPLAYBLOCKS: {
struct ioc_play_blocks *args = (struct ioc_play_blocks *)addr;
if ((error = cd_set_pa_immed(cd, 0)) != 0)
break;
error = cd_play(cd, args->blk, args->len);
break;
}
case CDIOCREADSUBCHANNEL: {
struct ioc_read_subchannel *args
= (struct ioc_read_subchannel *)addr;
struct cd_sub_channel_info data;
int len = args->data_len;
if (len > sizeof(data) ||
len < sizeof(struct cd_sub_channel_header)) {
error = EINVAL;
break;
}
error = cd_read_subchannel(cd, args->address_format,
args->data_format, args->track,
&data, len);
if (error)
break;
len = min(len, _2btol(data.header.data_len) +
sizeof(struct cd_sub_channel_header));
error = copyout(&data, args->data, len);
break;
}
case CDIOREADTOCHEADER: {
struct ioc_toc_header th;
if ((error = cd_read_toc(cd, 0, 0, &th, sizeof(th), 0)) != 0)
break;
if (cd->sc_link->quirks & ADEV_LITTLETOC)
th.len = letoh16(th.len);
else
th.len = betoh16(th.len);
bcopy(&th, addr, sizeof(th));
break;
}
case CDIOREADTOCENTRYS: {
struct cd_toc *toc;
struct ioc_read_toc_entry *te =
(struct ioc_read_toc_entry *)addr;
struct ioc_toc_header *th;
struct cd_toc_entry *cte;
int len = te->data_len;
int ntracks;
toc = malloc(sizeof(*toc), M_TEMP, M_WAITOK | M_ZERO);
th = &toc->header;
if (len > sizeof(toc->entries) ||
len < sizeof(struct cd_toc_entry)) {
free(toc, M_TEMP);
error = EINVAL;
break;
}
error = cd_read_toc(cd, te->address_format, te->starting_track,
toc, len + sizeof(struct ioc_toc_header), 0);
if (error) {
free(toc, M_TEMP);
break;
}
if (te->address_format == CD_LBA_FORMAT)
for (ntracks =
th->ending_track - th->starting_track + 1;
ntracks >= 0; ntracks--) {
cte = &toc->entries[ntracks];
cte->addr_type = CD_LBA_FORMAT;
if (cd->sc_link->quirks & ADEV_LITTLETOC) {
#if BYTE_ORDER == BIG_ENDIAN
swap16_multi((u_int16_t *)&cte->addr,
sizeof(cte->addr) / 2);
#endif
} else
cte->addr.lba = betoh32(cte->addr.lba);
}
if (cd->sc_link->quirks & ADEV_LITTLETOC) {
th->len = letoh16(th->len);
} else
th->len = betoh16(th->len);
len = min(len, th->len - (sizeof(th->starting_track) +
sizeof(th->ending_track)));
error = copyout(toc->entries, te->data, len);
free(toc, M_TEMP);
break;
}
case CDIOREADMSADDR: {
struct cd_toc *toc;
int sessno = *(int *)addr;
struct cd_toc_entry *cte;
if (sessno != 0) {
error = EINVAL;
break;
}
toc = malloc(sizeof(*toc), M_TEMP, M_WAITOK | M_ZERO);
error = cd_read_toc(cd, 0, 0, toc,
sizeof(struct ioc_toc_header) + sizeof(struct cd_toc_entry),
0x40 /* control word for "get MS info" */);
if (error) {
free(toc, M_TEMP);
break;
}
cte = &toc->entries[0];
if (cd->sc_link->quirks & ADEV_LITTLETOC) {
#if BYTE_ORDER == BIG_ENDIAN
swap16_multi((u_int16_t *)&cte->addr,
sizeof(cte->addr) / 2);
#endif
} else
cte->addr.lba = betoh32(cte->addr.lba);
if (cd->sc_link->quirks & ADEV_LITTLETOC)
toc->header.len = letoh16(toc->header.len);
else
toc->header.len = betoh16(toc->header.len);
*(int *)addr = (toc->header.len >= 10 && cte->track > 1) ?
cte->addr.lba : 0;
free(toc, M_TEMP);
break;
}
case CDIOCSETPATCH: {
struct ioc_patch *arg = (struct ioc_patch *)addr;
error = cd_setchan(cd, arg->patch[0], arg->patch[1],
arg->patch[2], arg->patch[3], 0);
break;
}
case CDIOCGETVOL: {
struct ioc_vol *arg = (struct ioc_vol *)addr;
error = cd_getvol(cd, arg, 0);
break;
}
case CDIOCSETVOL: {
struct ioc_vol *arg = (struct ioc_vol *)addr;
error = cd_setvol(cd, arg, 0);
break;
}
case CDIOCSETMONO:
error = cd_setchan(cd, BOTH_CHANNEL, BOTH_CHANNEL, MUTE_CHANNEL,
MUTE_CHANNEL, 0);
break;
case CDIOCSETSTEREO:
error = cd_setchan(cd, LEFT_CHANNEL, RIGHT_CHANNEL,
MUTE_CHANNEL, MUTE_CHANNEL, 0);
break;
case CDIOCSETMUTE:
error = cd_setchan(cd, MUTE_CHANNEL, MUTE_CHANNEL, MUTE_CHANNEL,
MUTE_CHANNEL, 0);
break;
case CDIOCSETLEFT:
error = cd_setchan(cd, LEFT_CHANNEL, LEFT_CHANNEL, MUTE_CHANNEL,
MUTE_CHANNEL, 0);
break;
case CDIOCSETRIGHT:
error = cd_setchan(cd, RIGHT_CHANNEL, RIGHT_CHANNEL,
MUTE_CHANNEL, MUTE_CHANNEL, 0);
break;
case CDIOCRESUME:
error = cd_pause(cd, 1);
break;
case CDIOCPAUSE:
error = cd_pause(cd, 0);
break;
case CDIOCSTART:
error = scsi_start(cd->sc_link, SSS_START, 0);
break;
case CDIOCSTOP:
error = scsi_start(cd->sc_link, SSS_STOP, 0);
break;
close_tray:
case CDIOCCLOSE:
error = scsi_start(cd->sc_link, SSS_START|SSS_LOEJ,
SCSI_IGNORE_NOT_READY | SCSI_IGNORE_MEDIA_CHANGE);
break;
case MTIOCTOP:
if (((struct mtop *)addr)->mt_op == MTRETEN)
goto close_tray;
if (((struct mtop *)addr)->mt_op != MTOFFL) {
error = EIO;
break;
}
/* FALLTHROUGH */
case CDIOCEJECT: /* FALLTHROUGH */
case DIOCEJECT:
cd->sc_link->flags |= SDEV_EJECTING;
break;
case CDIOCALLOW:
error = scsi_prevent(cd->sc_link, PR_ALLOW, 0);
break;
case CDIOCPREVENT:
error = scsi_prevent(cd->sc_link, PR_PREVENT, 0);
break;
case DIOCLOCK:
error = scsi_prevent(cd->sc_link,
(*(int *)addr) ? PR_PREVENT : PR_ALLOW, 0);
break;
case CDIOCSETDEBUG:
cd->sc_link->flags |= (SDEV_DB1 | SDEV_DB2);
break;
case CDIOCCLRDEBUG:
cd->sc_link->flags &= ~(SDEV_DB1 | SDEV_DB2);
break;
case CDIOCRESET:
case SCIOCRESET:
error = cd_reset(cd);
break;
case CDIOCLOADUNLOAD: {
struct ioc_load_unload *args = (struct ioc_load_unload *)addr;
error = cd_load_unload(cd, args->options, args->slot);
break;
}
case DVD_AUTH:
error = dvd_auth(cd, (union dvd_authinfo *)addr);
break;
case DVD_READ_STRUCT:
error = dvd_read_struct(cd, (union dvd_struct *)addr);
break;
default:
if (DISKPART(dev) != RAW_PART) {
error = ENOTTY;
break;
}
error = scsi_do_ioctl(cd->sc_link, dev, cmd, addr, flag, p);
break;
}
exit:
device_unref(&cd->sc_dev);
return (error);
}
/*
* Open the device. Make sure the partition info is as up-to-date as can be.
*/
int
cdopen(dev_t dev, int flag, int fmt, struct proc *p)
{
struct scsi_link *sc_link;
struct cd_softc *cd;
int error = 0, part, rawopen, unit;
unit = DISKUNIT(dev);
part = DISKPART(dev);
rawopen = (part == RAW_PART) && (fmt == S_IFCHR);
cd = cdlookup(unit);
if (cd == NULL)
return (ENXIO);
sc_link = cd->sc_link;
SC_DEBUG(sc_link, SDEV_DB1,
("cdopen: dev=0x%x (unit %d (of %d), partition %d)\n", dev, unit,
cd_cd.cd_ndevs, part));
if ((error = cdlock(cd)) != 0) {
device_unref(&cd->sc_dev);
return (error);
}
if (cd->sc_dk.dk_openmask != 0) {
/*
* If any partition is open, but the disk has been invalidated,
* disallow further opens.
*/
if ((sc_link->flags & SDEV_MEDIA_LOADED) == 0) {
if (rawopen)
goto out;
error = EIO;
goto bad;
}
} else {
/*
* Check that it is still responding and ok. Drive can be in
* progress of loading media so use increased retries number
* and don't ignore NOT_READY.
*/
/* Use cd_interpret_sense() now. */
sc_link->flags |= SDEV_OPEN;
error = scsi_test_unit_ready(sc_link, TEST_READY_RETRIES,
(rawopen ? SCSI_SILENT : 0) | SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_MEDIA_CHANGE);
/* Start the cd spinning if necessary. */
if (error == EIO)
error = scsi_start(sc_link, SSS_START,
SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_MEDIA_CHANGE | SCSI_SILENT);
if (error) {
if (rawopen) {
error = 0;
goto out;
} else
goto bad;
}
/* Lock the cd in. */
error = scsi_prevent(sc_link, PR_PREVENT,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE |
SCSI_SILENT);
if (error)
goto bad;
/* Load the physical device parameters. */
sc_link->flags |= SDEV_MEDIA_LOADED;
if (cd_get_parms(cd, (rawopen ? SCSI_SILENT : 0) |
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE)) {
sc_link->flags &= ~SDEV_MEDIA_LOADED;
error = ENXIO;
goto bad;
}
SC_DEBUG(sc_link, SDEV_DB3, ("Params loaded\n"));
/* Fabricate a disk label. */
cdgetdisklabel(dev, cd, cd->sc_dk.dk_label, 0);
SC_DEBUG(sc_link, SDEV_DB3, ("Disklabel fabricated\n"));
}
/* Check that the partition exists. */
if (part != RAW_PART && (part >= cd->sc_dk.dk_label->d_npartitions ||
cd->sc_dk.dk_label->d_partitions[part].p_fstype == FS_UNUSED)) {
error = ENXIO;
goto bad;
}
out: /* Insure only one open at a time. */
switch (fmt) {
case S_IFCHR:
cd->sc_dk.dk_copenmask |= (1 << part);
break;
case S_IFBLK:
cd->sc_dk.dk_bopenmask |= (1 << part);
break;
}
cd->sc_dk.dk_openmask = cd->sc_dk.dk_copenmask | cd->sc_dk.dk_bopenmask;
sc_link->flags |= SDEV_OPEN;
SC_DEBUG(sc_link, SDEV_DB3, ("open complete\n"));
/* It's OK to fall through because dk_openmask is now non-zero. */
bad:
if (cd->sc_dk.dk_openmask == 0) {
scsi_prevent(sc_link, PR_ALLOW,
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE |
SCSI_SILENT);
sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED);
}
cdunlock(cd);
device_unref(&cd->sc_dev);
return (error);
}
/*
* Open the device. Make sure the partition info is as up-to-date as can be.
*/
int
sdopen(dev_t dev, int flag, int fmt, struct proc *p)
{
struct scsi_link *sc_link;
struct sd_softc *sc;
int error = 0, part, rawopen, unit;
unit = DISKUNIT(dev);
part = DISKPART(dev);
rawopen = (part == RAW_PART) && (fmt == S_IFCHR);
sc = sdlookup(unit);
if (sc == NULL)
return (ENXIO);
sc_link = sc->sc_link;
if (sc->flags & SDF_DYING) {
device_unref(&sc->sc_dev);
return (ENXIO);
}
if (ISSET(flag, FWRITE) && ISSET(sc_link->flags, SDEV_READONLY)) {
device_unref(&sc->sc_dev);
return (EACCES);
}
SC_DEBUG(sc_link, SDEV_DB1,
("sdopen: dev=0x%x (unit %d (of %d), partition %d)\n", dev, unit,
sd_cd.cd_ndevs, part));
if ((error = disk_lock(&sc->sc_dk)) != 0) {
device_unref(&sc->sc_dev);
return (error);
}
if (sc->sc_dk.dk_openmask != 0) {
/*
* If any partition is open, but the disk has been invalidated,
* disallow further opens of non-raw partition.
*/
if ((sc_link->flags & SDEV_MEDIA_LOADED) == 0) {
if (rawopen)
goto out;
error = EIO;
goto bad;
}
} else {
/* Spin up non-UMASS devices ready or not. */
if ((sc->sc_link->flags & SDEV_UMASS) == 0)
scsi_start(sc_link, SSS_START, (rawopen ? SCSI_SILENT :
0) | SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_MEDIA_CHANGE);
/* Use sd_interpret_sense() for sense errors.
*
* But only after spinning the disk up! Just in case a broken
* device returns "Initialization command required." and causes
* a loop of scsi_start() calls.
*/
sc_link->flags |= SDEV_OPEN;
/*
* Try to prevent the unloading of a removable device while
* it's open. But allow the open to proceed if the device can't
* be locked in.
*/
if ((sc_link->flags & SDEV_REMOVABLE) != 0) {
scsi_prevent(sc_link, PR_PREVENT, SCSI_SILENT |
SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_MEDIA_CHANGE);
}
/* Check that it is still responding and ok. */
error = scsi_test_unit_ready(sc_link,
TEST_READY_RETRIES, SCSI_SILENT |
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE);
if (error) {
if (rawopen) {
error = 0;
goto out;
} else
goto bad;
}
/* Load the physical device parameters. */
sc_link->flags |= SDEV_MEDIA_LOADED;
if (sd_get_parms(sc, &sc->params, (rawopen ? SCSI_SILENT : 0))
== SDGP_RESULT_OFFLINE) {
sc_link->flags &= ~SDEV_MEDIA_LOADED;
error = ENXIO;
goto bad;
}
SC_DEBUG(sc_link, SDEV_DB3, ("Params loaded\n"));
/* Load the partition info if not already loaded. */
if (sdgetdisklabel(dev, sc, sc->sc_dk.dk_label, 0) == EIO) {
error = EIO;
goto bad;
}
SC_DEBUG(sc_link, SDEV_DB3, ("Disklabel loaded\n"));
}
out:
if ((error = disk_openpart(&sc->sc_dk, part, fmt, 1)) != 0)
goto bad;
SC_DEBUG(sc_link, SDEV_DB3, ("open complete\n"));
/* It's OK to fall through because dk_openmask is now non-zero. */
bad:
if (sc->sc_dk.dk_openmask == 0) {
if ((sc->sc_link->flags & SDEV_REMOVABLE) != 0)
scsi_prevent(sc_link, PR_ALLOW, SCSI_SILENT |
SCSI_IGNORE_ILLEGAL_REQUEST |
SCSI_IGNORE_MEDIA_CHANGE);
sc_link->flags &= ~(SDEV_OPEN | SDEV_MEDIA_LOADED);
}
disk_unlock(&sc->sc_dk);
device_unref(&sc->sc_dev);
return (error);
}
/*
* The routine called by the low level scsi routine when it discovers
* a device suitable for this driver.
*/
void
sdattach(struct device *parent, struct device *self, void *aux)
{
struct sd_softc *sc = (struct sd_softc *)self;
struct scsi_attach_args *sa = aux;
struct disk_parms *dp = &sc->params;
struct scsi_link *sc_link = sa->sa_sc_link;
int sd_autoconf = scsi_autoconf | SCSI_SILENT |
SCSI_IGNORE_ILLEGAL_REQUEST | SCSI_IGNORE_MEDIA_CHANGE;
struct dk_cache dkc;
int error, result;
SC_DEBUG(sc_link, SDEV_DB2, ("sdattach:\n"));
/*
* Store information needed to contact our base driver
*/
sc->sc_link = sc_link;
sc_link->interpret_sense = sd_interpret_sense;
sc_link->device_softc = sc;
if ((sc_link->flags & SDEV_ATAPI) && (sc_link->flags & SDEV_REMOVABLE))
sc_link->quirks |= SDEV_NOSYNCCACHE;
if (!(sc_link->inqdata.flags & SID_RelAdr))
sc_link->quirks |= SDEV_ONLYBIG;
/*
* Note if this device is ancient. This is used in sdminphys().
*/
if (!(sc_link->flags & SDEV_ATAPI) &&
SCSISPC(sa->sa_inqbuf->version) == 0)
sc->flags |= SDF_ANCIENT;
/*
* Use the subdriver to request information regarding
* the drive. We cannot use interrupts yet, so the
* request must specify this.
*/
printf("\n");
scsi_xsh_set(&sc->sc_xsh, sc_link, sdstart);
timeout_set(&sc->sc_timeout, (void (*)(void *))scsi_xsh_add,
&sc->sc_xsh);
/* Spin up non-UMASS devices ready or not. */
if ((sc->sc_link->flags & SDEV_UMASS) == 0)
scsi_start(sc_link, SSS_START, sd_autoconf);
/*
* Some devices (e.g. Blackberry Pearl) won't admit they have
* media loaded unless its been locked in.
*/
if ((sc_link->flags & SDEV_REMOVABLE) != 0)
scsi_prevent(sc_link, PR_PREVENT, sd_autoconf);
/* Check that it is still responding and ok. */
error = scsi_test_unit_ready(sc->sc_link, TEST_READY_RETRIES * 3,
sd_autoconf);
if (error)
result = SDGP_RESULT_OFFLINE;
else
result = sd_get_parms(sc, &sc->params, sd_autoconf);
if ((sc_link->flags & SDEV_REMOVABLE) != 0)
scsi_prevent(sc_link, PR_ALLOW, sd_autoconf);
switch (result) {
case SDGP_RESULT_OK:
printf("%s: %lluMB, %lu bytes/sector, %llu sectors",
sc->sc_dev.dv_xname,
dp->disksize / (1048576 / dp->secsize), dp->secsize,
dp->disksize);
printf("\n");
break;
case SDGP_RESULT_OFFLINE:
break;
#ifdef DIAGNOSTIC
default:
panic("sdattach: unknown result (%#x) from get_parms", result);
break;
#endif
}
/*
* Initialize disk structures.
*/
sc->sc_dk.dk_name = sc->sc_dev.dv_xname;
bufq_init(&sc->sc_bufq, BUFQ_FIFO);
/*
* Enable write cache by default.
*/
memset(&dkc, 0, sizeof(dkc));
if (sd_ioctl_cache(sc, DIOCGCACHE, &dkc) == 0 && dkc.wrcache == 0) {
dkc.wrcache = 1;
sd_ioctl_cache(sc, DIOCSCACHE, &dkc);
}
/*
* Establish a shutdown hook so that we can ensure that
* our data has actually made it onto the platter at
* shutdown time. Note that this relies on the fact
* that the shutdown hook code puts us at the head of
* the list (thus guaranteeing that our hook runs before
* our ancestors').
*/
if ((sc->sc_sdhook =
shutdownhook_establish(sd_shutdown, sc)) == NULL)
printf("%s: WARNING: unable to establish shutdown hook\n",
sc->sc_dev.dv_xname);
/* Attach disk. */
disk_attach(&sc->sc_dev, &sc->sc_dk);
}
/* scsi_unit_not_ready()
*
* If the sense key is SCSI_NOT_READY then this function checks the additional
* sense key & its qualifier to determine the final sense outcome. Return:
*
* SENSE_OK No error. Continue the operation.
* SENSE_RETRY The drive is in a transitional state, retry the operation.
* SENSE_FATAL The drive is not ready. Stop the operation.
*/
status_t scsi_unit_not_ready( SCSI_device_s * psDevice, SCSI_sense_s * psSense )
{
int nError;
/* Find out why the unit is not ready */
switch ( psSense->asc )
{
case SCSI_NO_ASC_DATA:
{
kerndbg( KERN_DEBUG_LOW, "With additional code SCSI_NO_ASC_DATA\n" );
/* Probably worth trying again */
nError = SENSE_RETRY;
break;
}
case SCSI_LOGICAL_UNIT_NOT_READY:
{
kerndbg( KERN_DEBUG_LOW, "With additional code SCSI_LOGICAL_UNIT_NOT_READY\n" );
/* Find out why it isn't ready */
switch ( psSense->ascq )
{
case SCSI_NOT_REPORTABLE:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_NOT_REPORTABLE\n" );
/* We don't know what this error is, may as well try again */
nError = SENSE_RETRY;
break;
}
case SCSI_BECOMING_READY:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_BECOMING_READY\n" );
/* Wait for the drive to become ready. Delay a little to give
the drive a chance to spin up */
udelay( 1000 );
nError = SENSE_RETRY;
break;
}
case SCSI_MUST_INITIALIZE:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_MUST_INITIALIZE\n" );
/* Need to send a START/STOP to the drive */
if( scsi_start( psDevice ) < 0 )
{
nError = SENSE_FATAL;
}
else
nError = SENSE_RETRY;
break;
}
case SCSI_MANUAL_INTERVENTION:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_MANUAL_INTERVENTION\n" );
/* Nothing we can do */
nError = SENSE_FATAL;
break;
}
case SCSI_FORMAT_IN_PROGRESS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_FORMAT_IN_PROGRESS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_REBUILD_IN_PROGRESS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_REBUILD_IN_PROGRESS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_RECALC_IN_PROGRESS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_RECALC_IN_PROGRESS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_OP_IN_PROGRESS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_OP_IN_PROGRESS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_LONG_WRITE_IN_PROGRESS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_LONG_WRITE_IN_PROGRESS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_SELF_TEST_IN_PROGRESS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_SELF_TEST_IN_PROGRESS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_ASSYM_ACCESS_STATE_TRANS:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_ASSYM_ACCESS_STATE_TRANS\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_TARGET_PORT_STANDBY:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_TARGET_PORT_STANDBY\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_TARGET_PORT_UNAVAILABLE:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_TARGET_PORT_UNAVAILABLE\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_AUX_MEM_UNAVAILABLE:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_AUX_MEM_UNAVAILABLE\n" );
/* Should never happen */
nError = SENSE_FATAL;
break;
}
case SCSI_NOTIFY_REQUIRED:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_NOTIFY_REQUIRED\n" );
/* Send notify? */
nError = SENSE_FATAL;
break;
}
default:
{
kerndbg( KERN_DEBUG_LOW, "and an unknown qualifier 0x%04x\n", psSense->ascq );
/* We don't know what this error is */
nError = SENSE_FATAL;
break;
}
}
break;
}
case SCSI_NOT_RESPONDING:
{
kerndbg( KERN_DEBUG_LOW, "With additional code SCSI_NOT_RESPONDING\n" );
/* Give up */
nError = SENSE_FATAL;
break;
}
case SCSI_MEDIUM:
{
kerndbg( KERN_DEBUG_LOW, "With additional code SCSI_MEDIUM\n" );
/* It helps if the disk is in the drive. Is it? */
switch ( psSense->ascq )
{
case SCSI_MEDIUM_TRAY_OPEN:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_MEDIUM_TRAY_OPEN\n" );
/* We have the option of sending a START/STOP to close the drive
but that could be evil, so we won't */
nError = SENSE_FATAL;
break;
}
case SCSI_MEDIUM_NOT_PRESENT:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_MEDIUM_NOT_PRESENT\n" );
/* Put the disk in the drive, dum dum! */
nError = SENSE_FATAL;
break;
}
case SCSI_MEDIUM_TRAY_CLOSED:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_MEDIUM_TRAY_CLOSED\n" );
/* This is a bit of a silly error really; why is it an error if the tray is closed? */
nError = SENSE_FATAL;
break;
}
case SCSI_MEDIUM_LOADABLE:
{
kerndbg( KERN_DEBUG_LOW, "and a qualifier of SCSI_MEDIUM_LOADABLE\n" );
/* We can't load it ourselves */
nError = SENSE_FATAL;
break;
}
default:
{
kerndbg( KERN_DEBUG_LOW, "and an unknown qualifier 0x%04x\n", psSense->ascq );
/* We don't know what this error is */
nError = SENSE_FATAL;
break;
}
}
break;
}
default:
{
kerndbg( KERN_WARNING, "With an unknown or unsupported additional code 0x%04x\n", psSense->asc );
/* The drive did something screwy, possibly a deprecated sense condition, but still.. */
nError = SENSE_FATAL;
break;
}
}
return nError;
}
