/**
* \brief Application entry point.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
uint8_t slot = 0;
sd_mmc_err_t err;
system_init();
delay_init();
cdc_uart_init();
irq_initialize_vectors();
cpu_irq_enable();
time_tick_init();
// Initialize SD MMC stack
sd_mmc_init();
printf("\x0C\n\r-- SD/MMC Card Example --\n\r");
printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
while (1) {
if (slot == sd_mmc_nb_slot()) {
slot = 0;
}
printf("Please plug an SD/MMC card in slot %d.\n\r", slot+1);
// Wait for a card and ready
do {
err = sd_mmc_check(slot);
if ((SD_MMC_ERR_NO_CARD != err)
&& (SD_MMC_INIT_ONGOING != err)
&& (SD_MMC_OK != err)) {
printf("Card install FAILED\n\r");
printf("Please unplug and re-plug the card.\n\r");
while (SD_MMC_ERR_NO_CARD != sd_mmc_check(slot)) {
}
}
} while (SD_MMC_OK != err);
// Display basic card information
main_display_info_card(slot);
/* Test the card */
if (sd_mmc_get_type(slot) & (CARD_TYPE_SD | CARD_TYPE_MMC)) {
// SD/MMC Card R/W
main_test_memory(slot);
}
printf("Test finished, please unplugged the card.\n\r");
while (SD_MMC_OK == sd_mmc_check(slot)) {
}
slot++;
}
}
void memories_initialization(void)
{
#ifdef CONF_BOARD_SMC_PSRAM
psram_init();
#endif
#ifdef CONF_BOARD_SRAM
sram_init();
#endif
#ifdef CONF_BOARD_SDRAMC
/* Enable SMC peripheral clock */
pmc_enable_periph_clk(ID_SMC);
/* Complete SDRAM configuration */
sdramc_init((sdramc_memory_dev_t *)&SDRAM_MICRON_MT48LC16M16A2,
sysclk_get_cpu_hz());
#endif
#ifdef CONF_BOARD_AT45DBX
at45dbx_init();
if (at45dbx_mem_check() != true) {
while (1) {
}
}
#endif
#ifdef CONF_BOARD_SD_MMC_HSMCI
uint8_t slot = 0;
sd_mmc_err_t err;
sd_mmc_init();
if (slot == sd_mmc_nb_slot()) {
slot = 0;
}
// Wait for a card and ready
do {
err = sd_mmc_check(slot);
if ((SD_MMC_ERR_NO_CARD != err)
&& (SD_MMC_INIT_ONGOING != err)
&& (SD_MMC_OK != err)) {
while (SD_MMC_ERR_NO_CARD != sd_mmc_check(slot)) {
}
}
} while (SD_MMC_OK != err);
#endif
}
void datalog_tasks_init(void)
{
uint8_t slot = 0;
sd_mmc_err_t err;
sd_mmc_init();
if (slot == sd_mmc_nb_slot()) {
slot = 0;
}
// Wait for a card and ready
do {
err = sd_mmc_check(slot);
if ((SD_MMC_ERR_NO_CARD != err)
&& (SD_MMC_INIT_ONGOING != err)
&& (SD_MMC_OK != err)) {
while (SD_MMC_ERR_NO_CARD != sd_mmc_check(slot)) {
}
}
} while (SD_MMC_OK != err);
}
/**
* \brief Application entry point.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
uint8_t slot = 0;
sd_mmc_err_t err;
const usart_serial_options_t usart_serial_options = {
.baudrate = CONF_TEST_BAUDRATE,
.charlength = CONF_TEST_CHARLENGTH,
.paritytype = CONF_TEST_PARITY,
.stopbits = CONF_TEST_STOPBITS,
};
irq_initialize_vectors();
cpu_irq_enable();
sysclk_init();
board_init();
stdio_serial_init(CONF_TEST_USART, &usart_serial_options);
time_tick_init();
// Initialize SD MMC stack
sd_mmc_init();
printf("\x0C\n\r-- SD/MMC/SDIO Card Example --\n\r");
printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
while (1) {
if (slot == sd_mmc_nb_slot()) {
slot = 0;
}
printf("Please plug an SD, MMC or SDIO card in slot %d.\n\r", slot+1);
// Wait for a card and ready
do {
err = sd_mmc_check(slot);
if ((SD_MMC_ERR_NO_CARD != err)
&& (SD_MMC_INIT_ONGOING != err)
&& (SD_MMC_OK != err)) {
printf("Card install FAILED\n\r");
printf("Please unplug and re-plug the card.\n\r");
while (SD_MMC_ERR_NO_CARD != sd_mmc_check(slot)) {
}
}
} while (SD_MMC_OK != err);
// Display basic card information
main_display_info_card(slot);
/* Test the card */
if (sd_mmc_get_type(slot) & CARD_TYPE_SDIO) {
// Test CIA of SDIO card
main_test_sdio(slot);
}
if (sd_mmc_get_type(slot) & (CARD_TYPE_SD | CARD_TYPE_MMC)) {
// SD/MMC Card R/W
main_test_memory(slot);
}
printf("Test finished, please unplugged the card.\n\r");
while (SD_MMC_OK == sd_mmc_check(slot)) {
}
slot++;
}
}
