int
scsionline(SDunit* unit)
{
int ok;
static SDreq *r;
static uchar *p;
if((r = sdmalloc(r, sizeof(SDreq))) == nil)
return 0;
if((p = sdmalloc(p, 8)) == nil)
return 0;
ok = 0;
r->unit = unit;
r->lun = 0; /* ??? */
for(;;){
/*
* Read-capacity is mandatory for DA, WORM, CD-ROM and
* MO. It may return 'not ready' if type DA is not
* spun up, type MO or type CD-ROM are not loaded or just
* plain slow getting their act together after a reset.
*/
r->write = 0;
memset(r->cmd, 0, sizeof(r->cmd));
r->cmd[0] = 0x25;
r->cmd[1] = r->lun<<5;
r->clen = 10;
r->data = p;
r->dlen = 8;
r->flags = 0;
r->status = ~0;
// cgascreenputs("F", 1);
switch(scsirio(r)){
default:
break;
case 0:
unit->sectors = (p[0]<<24)|(p[1]<<16)|(p[2]<<8)|p[3];
/*
* Read-capacity returns the LBA of the last sector,
* therefore the number of sectors must be incremented.
*/
unit->sectors++;
unit->secsize = (p[4]<<24)|(p[5]<<16)|(p[6]<<8)|p[7];
ok = 1;
break;
case 2:
continue;
}
break;
}
return ok;
}
static long
sdrio(SDreq* r, void* a, long n)
{
void *data;
if(n >= SDmaxio || n < 0)
error(Etoobig);
data = nil;
if(n){
if((data = sdmalloc(n)) == nil)
error(Enomem);
if(r->write)
memmove(data, a, n);
}
r->data = data;
r->dlen = n;
if(waserror()){
sdfree(data);
r->data = nil;
nexterror();
}
if(r->unit->dev->ifc->rio(r) != SDok)
error(Eio);
if(!r->write && r->rlen > 0)
memmove(a, data, r->rlen);
sdfree(data);
r->data = nil;
poperror();
return r->rlen;
}
int
scsiexec(SDunit* unit, int write, uchar* cmd, int clen, void* data, int* dlen)
{
static SDreq *r;
int status;
if((r = sdmalloc(r, sizeof(SDreq))) == nil)
return SDmalloc;
r->unit = unit;
r->lun = cmd[1]>>5; /* ??? */
r->write = write;
memmove(r->cmd, cmd, clen);
r->clen = clen;
r->data = data;
if(dlen)
r->dlen = *dlen;
r->flags = 0;
r->status = ~0;
/*
* Call the device-specific I/O routine.
* There should be no calls to 'error()' below this
* which percolate back up.
*/
// cgascreenputs("D", 1);
switch(status = unit->dev->ifc->rio(r)){
case SDok:
if(dlen)
*dlen = r->rlen;
/*FALLTHROUGH*/
case SDcheck:
/*FALLTHROUGH*/
default:
/*
* It's more complicated than this. There are conditions
* which are 'ok' but for which the returned status code
* is not 'SDok'.
* Also, not all conditions require a reqsense, might
* need to do a reqsense here and make it available to the
* caller somehow.
*
* Mañana.
*/
break;
}
return status;
}
static void
mmcswitchfunc(SDio *io, int arg)
{
uchar *buf;
int n;
u32int r[4];
n = Funcbytes;
buf = sdmalloc(n);
if(waserror()){
print("mmcswitchfunc error\n");
sdfree(buf);
nexterror();
}
io->iosetup(0, buf, n, 1);
io->cmd(SWITCH_FUNC, arg, r);
io->io(0, buf, n);
sdfree(buf);
poperror();
}
int
scsiverify(SDunit* unit)
{
SDreq *r;
int i, status;
uchar *inquiry;
if((r = malloc(sizeof(SDreq))) == nil)
return 0;
if((inquiry = sdmalloc(sizeof(unit->inquiry))) == nil){
free(r);
return 0;
}
r->unit = unit;
r->lun = 0; /* ??? */
memset(unit->inquiry, 0, sizeof(unit->inquiry));
r->write = 0;
r->cmd[0] = 0x12;
r->cmd[1] = r->lun<<5;
r->cmd[4] = sizeof(unit->inquiry)-1;
r->clen = 6;
r->data = inquiry;
r->dlen = sizeof(unit->inquiry)-1;
r->flags = 0;
r->status = ~0;
if(unit->dev->ifc->rio(r) != SDok){
free(r);
return 0;
}
memmove(unit->inquiry, inquiry, r->dlen);
free(inquiry);
SET(status);
for(i = 0; i < 3; i++){
while((status = scsitest(r)) == SDbusy)
;
if(status == SDok || status != SDcheck)
break;
if(!(r->flags & SDvalidsense))
break;
if((r->sense[2] & 0x0F) != 0x02)
continue;
/*
* Unit is 'not ready'.
* If it is in the process of becoming ready or needs
* an initialising command, set status so it will be spun-up
* below.
* If there's no medium, that's OK too, but don't
* try to spin it up.
*/
if(r->sense[12] == 0x04){
if(r->sense[13] == 0x02 || r->sense[13] == 0x01){
status = SDok;
break;
}
}
if(r->sense[12] == 0x3A)
break;
}
if(status == SDok){
/*
* Try to ensure a direct-access device is spinning.
* Don't wait for completion, ignore the result.
*/
if((unit->inquiry[0] & 0x1F) == 0){
memset(r->cmd, 0, sizeof(r->cmd));
r->write = 0;
r->cmd[0] = 0x1B;
r->cmd[1] = (r->lun<<5)|0x01;
r->cmd[4] = 1;
r->clen = 6;
r->data = nil;
r->dlen = 0;
r->flags = 0;
r->status = ~0;
unit->dev->ifc->rio(r);
}
}
free(r);
if(status == SDok || status == SDcheck)
return 1;
return 0;
}
int
scsionline(SDunit* unit)
{
SDreq *r;
uchar *p;
int ok, retries;
if((r = malloc(sizeof(SDreq))) == nil)
return 0;
if((p = sdmalloc(8)) == nil){
free(r);
return 0;
}
ok = 0;
r->unit = unit;
r->lun = 0; /* ??? */
for(retries = 0; retries < 10; retries++){
/*
* Read-capacity is mandatory for DA, WORM, CD-ROM and
* MO. It may return 'not ready' if type DA is not
* spun up, type MO or type CD-ROM are not loaded or just
* plain slow getting their act together after a reset.
*/
r->write = 0;
memset(r->cmd, 0, sizeof(r->cmd));
r->cmd[0] = 0x25;
r->cmd[1] = r->lun<<5;
r->clen = 10;
r->data = p;
r->dlen = 8;
r->flags = 0;
r->status = ~0;
switch(scsirio(r)){
default:
break;
case 0:
unit->sectors = (p[0]<<24)|(p[1]<<16)|(p[2]<<8)|p[3];
unit->secsize = (p[4]<<24)|(p[5]<<16)|(p[6]<<8)|p[7];
/*
* Some ATAPI CD readers lie about the block size.
* Since we don't read audio via this interface
* it's okay to always fudge this.
*/
if(unit->secsize == 2352)
unit->secsize = 2048;
/*
* Devices with removable media may return 0 sectors
* when they have empty media (e.g. sata dvd writers);
* if so, keep the count zero.
*
* Read-capacity returns the LBA of the last sector,
* therefore the number of sectors must be incremented.
*/
if(unit->sectors != 0)
unit->sectors++;
ok = 1;
break;
case 1:
ok = 1;
break;
case 2:
continue;
}
break;
}
free(p);
free(r);
if(ok)
return ok+retries;
else
return 0;
}
static long
sdbio(Chan* c, int write, char* a, long len, uvlong off)
{
int nchange;
long l;
uchar *b;
SDpart *pp;
SDunit *unit;
SDev *sdev;
ulong max, nb, offset;
uvlong bno;
sdev = sdgetdev(DEV(c->qid));
if(sdev == nil){
decref(&sdev->r);
error(Enonexist);
}
unit = sdev->unit[UNIT(c->qid)];
if(unit == nil)
error(Enonexist);
nchange = 0;
qlock(&unit->ctl);
while(waserror()){
/* notification of media change; go around again */
if(strcmp(up->env->errstr, Eio) == 0 && unit->sectors == 0 && nchange++ == 0){
sdinitpart(unit);
continue;
}
/* other errors; give up */
qunlock(&unit->ctl);
decref(&sdev->r);
nexterror();
}
pp = &unit->part[PART(c->qid)];
if(unit->vers+pp->vers != c->qid.vers)
error(Echange);
/*
* Check the request is within bounds.
* Removeable drives are locked throughout the I/O
* in case the media changes unexpectedly.
* Non-removeable drives are not locked during the I/O
* to allow the hardware to optimise if it can; this is
* a little fast and loose.
* It's assumed that non-removeable media parameters
* (sectors, secsize) can't change once the drive has
* been brought online.
*/
bno = (off/unit->secsize) + pp->start;
nb = ((off+len+unit->secsize-1)/unit->secsize) + pp->start - bno;
max = SDmaxio/unit->secsize;
if(nb > max)
nb = max;
if(bno+nb > pp->end)
nb = pp->end - bno;
if(bno >= pp->end || nb == 0){
if(write)
error(Eio);
qunlock(&unit->ctl);
decref(&sdev->r);
poperror();
return 0;
}
if(!(unit->inquiry[1] & SDinq1removable)){
qunlock(&unit->ctl);
poperror();
}
b = sdmalloc(nb*unit->secsize);
if(b == nil)
error(Enomem);
if(waserror()){
sdfree(b);
if(!(unit->inquiry[1] & SDinq1removable))
decref(&sdev->r); /* gadverdamme! */
nexterror();
}
offset = off%unit->secsize;
if(offset+len > nb*unit->secsize)
len = nb*unit->secsize - offset;
if(write){
if(offset || (len%unit->secsize)){
l = unit->dev->ifc->bio(unit, 0, 0, b, nb, bno);
if(l < 0)
error(Eio);
if(l < (nb*unit->secsize)){
nb = l/unit->secsize;
l = nb*unit->secsize - offset;
if(len > l)
len = l;
}
}
memmove(b+offset, a, len);
l = unit->dev->ifc->bio(unit, 0, 1, b, nb, bno);
if(l < 0)
error(Eio);
if(l < offset)
len = 0;
else if(len > l - offset)
len = l - offset;
}
else{
l = unit->dev->ifc->bio(unit, 0, 0, b, nb, bno);
if(l < 0)
error(Eio);
if(l < offset)
len = 0;
else if(len > l - offset)
len = l - offset;
memmove(a, b+offset, len);
}
sdfree(b);
poperror();
if(unit->inquiry[1] & SDinq1removable){
qunlock(&unit->ctl);
poperror();
}
decref(&sdev->r);
return len;
}
static long
sdrio(SDreq* r, void* a, long n)
{
char *errstr;
int rv;
void *data;
SDunit *u;
int (*f)(SDreq*);
if(n >= SDmaxio || n < 0)
error(Etoobig);
u = r->unit;
if(u->haversense && r->cmd[0] == 0x03){
u->haversense = 0;
r->rlen = sizeof u->rsense;
if(r->rlen > n)
r->rlen = n;
memmove(a, u->rsense, r->rlen);
r->status = SDok;
return r->rlen;
}
data = nil;
while(n > 0 && (data = sdmalloc(n)) == nil){
if(!waserror()){
resrcwait("no memory for sdrio");
poperror();
}
}
if(waserror()){
sdfree(data);
r->data = nil;
nexterror();
}
if(r->write && n > 0)
memmove(data, a, n);
r->data = data;
r->dlen = n;
if(r->proto == SData){
f = u->dev->ifc->ataio;
errstr = Enoata;
}else{
f = u->dev->ifc->rio;
errstr = Enoscsi;
}
if(f == nil)
error(errstr);
rv = f(r);
if(r->flags & SDvalidsense){
memmove(u->rsense, r->sense, sizeof u->rsense);
u->haversense = 1;
}
if(rv != SDok)
error(Eio);
if(!r->write && r->rlen > 0)
memmove(a, data, r->rlen);
poperror();
sdfree(data);
r->data = nil;
return r->rlen;
}
long
scsibio(SDunit* unit, int lun, int write, void* data, long nb, long bno)
{
static SDreq *r;
long rlen;
if((r = sdmalloc(r, sizeof(SDreq))) == nil)
return SDmalloc;
r->unit = unit;
r->lun = lun;
again:
r->write = write;
if(write == 0)
r->cmd[0] = 0x28;
else
r->cmd[0] = 0x2A;
r->cmd[1] = (lun<<5);
r->cmd[2] = bno>>24;
r->cmd[3] = bno>>16;
r->cmd[4] = bno>>8;
r->cmd[5] = bno;
r->cmd[6] = 0;
r->cmd[7] = nb>>8;
r->cmd[8] = nb;
r->cmd[9] = 0;
r->clen = 10;
r->data = data;
r->dlen = nb*unit->secsize;
r->flags = 0;
r->status = ~0;
// cgascreenputs("E", 1);
switch(scsirio(r)){
default:
rlen = -1;
break;
case 0:
rlen = r->rlen;
break;
case 2:
rlen = -1;
if(!(r->flags & SDvalidsense))
break;
switch(r->sense[2] & 0x0F){
default:
break;
case 0x06: /* check condition */
/*
* Check for a removeable media change.
* If so, mark it and zap the geometry info
* to force an online request.
*/
if(r->sense[12] != 0x28 || r->sense[13] != 0)
break;
if(unit->inquiry[1] & 0x80){
unit->sectors = 0;
}
break;
case 0x02: /* not ready */
/*
* If unit is becoming ready,
* rather than not not ready, try again.
*/
if(r->sense[12] == 0x04 && r->sense[13] == 0x01)
goto again;
break;
}
break;
}
return rlen;
}
