Exemplo n.º 1
0
void sendDiscReceiver(int fd) {
    char buffer[10];
    int length = LENGTH_SU;
    
    generateFieldUAandSet01(buffer);
    buffer[CONTROL_SM_INDEX] = DISC_CONTROL_FIELD;
    buffer[BCC_SM_INDEX] = buffer[CONTROL_SM_INDEX] ^ buffer[ADDRESS_SM_INDEX];

    sendInformation(fd, buffer, length);

    printf("DISC command sent.\n");
}
Exemplo n.º 2
0
void sendSet(int fd) {
    char buffer[10];
    int length = LENGTH_SU;
    
    generateFieldUAandSet(buffer);
    buffer[CONTROL_SM_INDEX] = SET_CONTROL_FIELD;
    buffer[BCC_SM_INDEX] = buffer[CONTROL_SM_INDEX] ^ buffer[ADDRESS_SM_INDEX];

    sendInformation(fd, buffer, length);

    printf("Set Command sent.\n");
}
Exemplo n.º 3
0
void sendUA01(int fd) {
    char buffer[10];
    int length = LENGTH_SU;
    
    generateFieldUAandSet01(buffer);
    buffer[CONTROL_SM_INDEX] = UA_CONTROL_FIELD;
    buffer[BCC_SM_INDEX] = buffer[CONTROL_SM_INDEX] ^ buffer[ADDRESS_SM_INDEX];

    sendInformation(fd, buffer, length);

    printf("UA message sent.\n");
}
Exemplo n.º 4
0
FileUI::FileUI(QWidget *parent)
    : QWidget(parent)
{
    mData = new PrivData();
    // 开始创建界面UI

    // 先创建接收界面
    QFrame *frame1 = new QFrame(this);
    frame1->setWindowIconText(cns("接收"));
    QVBoxLayout *v1 = new QVBoxLayout();
    QLabel *l1 = new QLabel(cns("接收总进度"), frame1);
    QLabel *l2 = new QLabel(cns("当前文件进度"), frame1);
    QProgressBar *bar1 = new QProgressBar(frame1);
    bar1->setMaximum(100);
    bar1->setMinimum(0);
    bar1->setValue(0);
    connect(this, SIGNAL(signalRecvTotalProgress(int)),
            bar1, SLOT(setValue(int)));
    QProgressBar *bar2 = new QProgressBar(frame1);
    bar2->setMaximum(100);
    bar2->setMinimum(0);
    bar2->setValue(0);
    connect(this, SIGNAL(signalRecvCurrentProgress(int)),
            bar2, SLOT(setValue(int)));
    mRecvMsg = new QLabel(cns("接收消息..."), frame1);
    QFont f;
    f.setPixelSize(10);
    mRecvMsg->setFont(f);

    QPushButton *pb1 = new QPushButton(cns("停止接收"), frame1);
    connect(pb1, SIGNAL(clicked()), this, SLOT(stopRecv()));
    QPushButton *pb4 = new QPushButton(cns("打开文件夹"), frame1);
    connect(pb4, SIGNAL(clicked()), this, SLOT(openPath()));

    mRecvList = new QListWidget(frame1);

    QHBoxLayout *rhb1 = new QHBoxLayout();
    QHBoxLayout *rhb2 = new QHBoxLayout();

    rhb1->addWidget(l1, 0, Qt::AlignCenter);
    rhb1->addWidget(bar1, 0, Qt::AlignCenter);
    rhb2->addWidget(l2, 0, Qt::AlignCenter);
    rhb2->addWidget(bar2, 0, Qt::AlignCenter);

    v1->addLayout(rhb1);
    v1->addLayout(rhb2);
    v1->addWidget(mRecvMsg, 0, Qt::AlignLeft | Qt::AlignTop);

    v1->addWidget(mRecvList);

    QHBoxLayout *h2 = new QHBoxLayout();
    h2->addWidget(pb1);
    h2->addWidget(pb4);

    v1->addLayout(h2);
    frame1->setLayout(v1);

    QStatusBar *status1 = new QStatusBar(frame1);
    mRecvLabel = new QLabel(cns("接收速度:0MB/s"), frame1);
    status1->addPermanentWidget(mRecvLabel);
    frame1->layout()->addWidget(status1);



    // 再创建发送界面
    QFrame *frame2 = new QFrame(this);
    frame2->setWindowIconText(cns("发送"));
    QLabel *l4 = new QLabel(cns("发送总进度"), frame2);
    QLabel *l5 = new QLabel(cns("当前文件进度"), frame2);
    QProgressBar *bar3 = new QProgressBar(frame2);
    bar3->setMaximum(100);
    bar3->setMinimum(0);
    bar3->setValue(0);
    connect(this, SIGNAL(signalSendTotalProgress(int)),
            bar3, SLOT(setValue(int)));
    QProgressBar *bar4 = new QProgressBar(frame2);
    bar4->setMaximum(100);
    bar4->setMinimum(0);
    bar4->setValue(0);
    connect(this, SIGNAL(signalSendCurrentProgress(int)),
            bar4, SLOT(setValue(int)));
    mSendMsg = new QLabel(cns("发送消息..."), frame2);
    mSendMsg->setFont(f);

    QPushButton *pb2 = new QPushButton(cns("开始发送"), frame2);
    connect(pb2, SIGNAL(clicked()), this, SLOT(askSend()));
    QPushButton *pb3 = new QPushButton(cns("停止发送"), frame2);
    connect(pb3, SIGNAL(clicked()), this, SLOT(stopSend()));
    mClear = new QPushButton(cns("清空列表"), frame2);
    connect(mClear, SIGNAL(clicked()), this, SLOT(clearList()));

    mList = new QListWidget(frame2);
    connect(mList, SIGNAL(itemDoubleClicked(QListWidgetItem*)),
            this, SLOT(itemDoubleClicked(QListWidgetItem*)));

    QVBoxLayout *v2 = new QVBoxLayout();

    QHBoxLayout *shb1 = new QHBoxLayout();
    QHBoxLayout *shb2 = new QHBoxLayout();

    shb1->addWidget(l4, 0, Qt::AlignCenter);
    shb1->addWidget(bar3, 0, Qt::AlignCenter);
    shb2->addWidget(l5, 0, Qt::AlignCenter);
    shb2->addWidget(bar4, 0, Qt::AlignCenter);
    v2->addLayout(shb1);
    v2->addLayout(shb2);
    v2->addWidget(mSendMsg, 0, Qt::AlignLeft | Qt::AlignTop);

    QHBoxLayout *h1 = new QHBoxLayout();
    h1->addWidget(pb2);
    h1->addWidget(pb3);
    h1->addWidget(mClear);

    v2->addWidget(mList);
    v2->addLayout(h1);
    frame2->setLayout(v2);

    QStatusBar *status2 = new QStatusBar(frame2);
    mSendLabel = new QLabel(cns("发送速度:0MB/s"), frame2);
    status2->addPermanentWidget(mSendLabel);
    frame2->layout()->addWidget(status2);

    QVBoxLayout *v3 = new QVBoxLayout();
    v3->addWidget(frame1);
    QSpacerItem *item = new QSpacerItem(192, 10);
    v3->addSpacerItem(item);
    v3->addWidget(frame2);
    setLayout(v3);

//    resize(192, 372);

    // 连接信息
    connect(mData->opt, SIGNAL(recvInformation(QString,QString)),
            this, SLOT(recvInfo(QString,QString)));
    connect(mData->opt, SIGNAL(sendInformation(QString,QString)),
            this, SLOT(sendInfo(QString,QString)));
    connect(mData->opt, SIGNAL(recvFilesProgress(int)),
            this, SIGNAL(signalRecvTotalProgress(int)));
    connect(mData->opt, SIGNAL(recvCurrentFileProgress(int)),
            this, SIGNAL(signalRecvCurrentProgress(int)));
    connect(mData->opt, SIGNAL(sendFilesProgress(int)),
            this, SIGNAL(signalSendTotalProgress(int)));
    connect(mData->opt, SIGNAL(sendCurrentFileProgress(int)),
            this, SIGNAL(signalSendCurrentProgress(int)));
    connect(this, SIGNAL(signalStartSend()),
            this, SLOT(startSend()));

    connect(mData->opt, SIGNAL(signalRecvPreInfo(QStringList)),
            this, SLOT(insertRecvFile(QStringList)));
    connect(mData->opt, SIGNAL(signalRecvStart()),
            this, SLOT(recvstart()));
    connect(mData->opt, SIGNAL(signalRecvSuccess()),
            this, SLOT(recvsuccess()));
    connect(mData->opt, SIGNAL(signalSendStart()),
            this, SLOT(sendstart()));
    connect(mData->opt, SIGNAL(signalSendSuccess()),
            this, SLOT(sendsuccess()));

    connect(mData->opt, SIGNAL(sendFileSpeed(float)),
            this, SLOT(sendSpeed(float)));
    connect(mData->opt, SIGNAL(recvFileSpeed(float)),
            this, SLOT(recvSpeed(float)));
}