void SetupWizard::createPages()
{
setPage(PAGE_START, new StartPage(this));
setPage(PAGE_UPDATE, new AutoUpdatePage(this));
setPage(PAGE_CONTROLLER, new ControllerPage(this));
setPage(PAGE_VEHICLES, new VehiclePage(this));
setPage(PAGE_MULTI, new MultiPage(this));
setPage(PAGE_FIXEDWING, new FixedWingPage(this));
setPage(PAGE_HELI, new HeliPage(this));
setPage(PAGE_SURFACE, new SurfacePage(this));
setPage(PAGE_INPUT, new InputPage(this));
setPage(PAGE_OUTPUT, new OutputPage(this));
setPage(PAGE_LEVELLING, new LevellingPage(this));
setPage(PAGE_CALIBRATION, new OutputCalibrationPage(this));
setPage(PAGE_SUMMARY, new SummaryPage(this));
setPage(PAGE_SAVE, new SavePage(this));
setPage(PAGE_REBOOT, new RebootPage(this));
setPage(PAGE_NOTYETIMPLEMENTED, new NotYetImplementedPage(this));
setPage(PAGE_END, new EndPage(this));
setStartId(PAGE_START);
connect(button(QWizard::CustomButton1), SIGNAL(clicked()), this, SLOT(customBackClicked()));
setButtonText(QWizard::CustomButton1, buttonText(QWizard::BackButton));
QList<QWizard::WizardButton> button_layout;
button_layout << QWizard::Stretch << QWizard::CustomButton1 << QWizard::NextButton << QWizard::CancelButton << QWizard::FinishButton;
setButtonLayout(button_layout);
connect(this, SIGNAL(currentIdChanged(int)), this, SLOT(pageChanged(int)));
}
FirstRunDlg::FirstRunDlg(QWidget* const parent)
: QWizard(parent),
d(new Private)
{
setWizardStyle(QWizard::ClassicStyle);
setButtonLayout(QList<QWizard::WizardButton>() << QWizard::HelpButton
<< QWizard::BackButton
<< QWizard::CancelButton
<< QWizard::NextButton
<< QWizard::FinishButton);
d->welcomePage = new WelcomePage(this); // First assistant page
d->collectionPage = new CollectionPage(this);
d->databasePage = new DatabasePage(this);
d->rawPage = new RawPage(this);
d->metadataPage = new MetadataPage(this);
d->previewPage = new PreviewPage(this);
d->openFilePage = new OpenFilePage(this);
d->tooltipsPage = new TooltipsPage(this);
// NOTE: Added here new assistant pages...
d->startScanPage = new StartScanPage(this); // Last assistant page
resize(600, 600);
connect(button(QWizard::FinishButton), SIGNAL(clicked()),
this, SLOT(slotFinishPressed()));
connect(this, SIGNAL(helpRequested()),
this, SLOT(slotHelp()));
}
void SetupWizard::createPages()
{
setPage(PAGE_START, new OPStartPage(this));
setPage(PAGE_UPDATE, new AutoUpdatePage(this));
setPage(PAGE_CONTROLLER, new ControllerPage(this));
setPage(PAGE_VEHICLES, new VehiclePage(this));
setPage(PAGE_MULTI, new MultiPage(this));
setPage(PAGE_FIXEDWING, new FixedWingPage(this));
setPage(PAGE_AIRSPEED, new AirSpeedPage(this));
setPage(PAGE_GPS, new GpsPage(this));
setPage(PAGE_HELI, new HeliPage(this));
setPage(PAGE_SURFACE, new SurfacePage(this));
setPage(PAGE_INPUT, new InputPage(this));
setPage(PAGE_ESC, new EscPage(this));
setPage(PAGE_SERVO, new ServoPage(this));
setPage(PAGE_BIAS_CALIBRATION, new BiasCalibrationPage(this));
setPage(PAGE_ESC_CALIBRATION, new EscCalibrationPage(this));
setPage(PAGE_OUTPUT_CALIBRATION, new OutputCalibrationPage(this));
setPage(PAGE_SUMMARY, new SummaryPage(this));
setPage(PAGE_SAVE, new SavePage(this));
setPage(PAGE_NOTYETIMPLEMENTED, new NotYetImplementedPage(this));
setPage(PAGE_AIRFRAME_INITIAL_TUNING, new AirframeInitialTuningPage(this));
setPage(PAGE_END, new OPEndPage(this));
setStartId(PAGE_START);
connect(button(QWizard::CustomButton1), SIGNAL(clicked()), this, SLOT(customBackClicked()));
setButtonText(QWizard::CustomButton1, buttonText(QWizard::BackButton));
QList<QWizard::WizardButton> button_layout;
button_layout << QWizard::Stretch << QWizard::CustomButton1 << QWizard::NextButton << QWizard::CancelButton << QWizard::FinishButton;
setButtonLayout(button_layout);
connect(this, SIGNAL(currentIdChanged(int)), this, SLOT(pageChanged(int)));
}
MatDBAboutDialog::MatDBAboutDialog(QWidget *parent) :
QWizard(parent)
{
#ifdef Q_WS_MAC
this->setParent(qApp->focusWidget());
this->setWindowModality(Qt::WindowModal);
this->setWindowFlags(Qt::Sheet);
setWizardStyle(ModernStyle);
#endif
setFixedWidth(900);
setFixedHeight(450);
setSizeGripEnabled(false);
setPage(Page_Version, new VersionPage);
setPage(Page_License, new LicensePage);
setStartId(Page_Version);
QList<QWizard::WizardButton> layout;
layout << QWizard::Stretch << QWizard::FinishButton << QWizard::NextButton;
setButtonLayout(layout);
QPixmap pix(":/artwork/MatDBAbout.png");
setPixmap(QWizard::WatermarkPixmap, pix);
setPixmap(QWizard::LogoPixmap, pix);
setPixmap(QWizard::BannerPixmap, pix);
setPixmap(QWizard::BackgroundPixmap, pix);
}
//! [1]
MyWizard::MyWizard(QWidget *parent)
: QWizard(parent)
{
...
QList<QWizard::WizardButton> layout;
layout << QWizard::Stretch << QWizard::BackButton << QWizard::CancelButton
<< QWizard::NextButton << QWizard::FinishButton;
setButtonLayout(layout);
...
}
EulaDialog::EulaDialog(QWidget* parent) : QWizard(parent) {
setWindowTitle(trEulaTitle);
setWindowFlags(windowFlags() & ~Qt::WindowContextHelpButtonHint);
//// First page
QWizardPage* firstPage = new QWizardPage;
QRadioButton* agreeButton = new QRadioButton(trIAgree);
VERIFY(connect(agreeButton, &QRadioButton::clicked, this, &EulaDialog::agreeButtonClicked));
QRadioButton* notAgreeButton = new QRadioButton(trIDontAgree);
notAgreeButton->setChecked(true);
VERIFY(connect(notAgreeButton, &QRadioButton::clicked, this, &EulaDialog::notAgreeButtonClicked));
QHBoxLayout* radioButtonsLay = new QHBoxLayout;
radioButtonsLay->setAlignment(Qt::AlignHCenter);
radioButtonsLay->setSpacing(30);
radioButtonsLay->addWidget(agreeButton);
radioButtonsLay->addWidget(notAgreeButton);
QTextEdit* textBrowser = new QTextEdit;
QFile file(":" PROJECT_NAME_LOWERCASE "/LICENSE");
if (file.open(QFile::ReadOnly | QFile::Text)) {
textBrowser->setHtml(file.readAll());
}
QVBoxLayout* mainLayout1 = new QVBoxLayout;
mainLayout1->addWidget(new QLabel("<h3>" + trEndUserAgr + "</h3>"));
mainLayout1->addWidget(textBrowser);
mainLayout1->addLayout(radioButtonsLay, Qt::AlignCenter);
firstPage->setLayout(mainLayout1);
addPage(firstPage);
//// Buttons
setButtonText(QWizard::CustomButton1, trBack);
setButtonText(QWizard::CustomButton2, trNext);
setButtonText(QWizard::CustomButton3, trFinish);
VERIFY(connect(button(QWizard::CustomButton1), &QAbstractButton::clicked, this, &EulaDialog::backButtonClicked));
VERIFY(connect(button(QWizard::CustomButton2), &QAbstractButton::clicked, this, &EulaDialog::nextButtonClicked));
VERIFY(connect(button(QWizard::CustomButton3), &QAbstractButton::clicked, this, &EulaDialog::finishButtonClicked));
setButtonLayout(QList<WizardButton>{QWizard::Stretch, QWizard::CustomButton1, QWizard::CustomButton2,
QWizard::CancelButton, QWizard::CustomButton3});
button(QWizard::CustomButton1)->setHidden(true);
button(QWizard::CustomButton2)->setHidden(true);
button(QWizard::CustomButton3)->setDisabled(true);
setWizardStyle(QWizard::ModernStyle);
}
FirstRunDlg::FirstRunDlg(QWidget* const parent)
: QWizard(parent),
d(new Private)
{
setWizardStyle(QWizard::ClassicStyle);
setButtonLayout(QList<QWizard::WizardButton>() << QWizard::HelpButton
<< QWizard::BackButton
<< QWizard::CancelButton
<< QWizard::NextButton
<< QWizard::FinishButton);
bool migrateAvailable;
#ifdef Q_OS_LINUX
::Kdelibs4Migration migration;
// If there's a digikamrc file in $KDEHOME/share/config,
// then we create the migration page in the wizard
migrateAvailable = !migration.locateLocal("config", QLatin1String("digikamrc")).isEmpty();
#else
migrateAvailable = false;
#endif
d->welcomePage = new WelcomePage(this); // First assistant page
if (migrateAvailable)
d->migrateFromDigikam4Page = new MigrateFromDigikam4Page(this);
d->collectionPage = new CollectionPage(this);
d->databasePage = new DatabasePage(this);
d->rawPage = new RawPage(this);
d->metadataPage = new MetadataPage(this);
d->previewPage = new PreviewPage(this);
d->openFilePage = new OpenFilePage(this);
d->tooltipsPage = new TooltipsPage(this);
// NOTE: Added here new assistant pages...
d->startScanPage = new StartScanPage(this); // Last assistant page
resize(600, 600);
connect(button(QWizard::FinishButton), SIGNAL(clicked()),
this, SLOT(slotFinishPressed()));
connect(this, SIGNAL(helpRequested()),
this, SLOT(slotHelp()));
}
void welcomeWizard::programInit( )
{
checkDisableWelcome = new QCheckBox();
checkDisableWelcome->setText(tr("Don't show on next startup"));
setButton(QWizard::CustomButton1, checkDisableWelcome);
QList<QWizard::WizardButton> layout;
layout << QWizard::CustomButton1 << QWizard::Stretch << QWizard::BackButton << QWizard::NextButton << QWizard::FinishButton;
setButtonLayout(layout);
button(QWizard::NextButton)->setText(tr("&Next"));
button(QWizard::BackButton)->setText(tr("&Back"));
button(QWizard::FinishButton)->setText(tr("&Finish"));
connect(checkDisableWelcome, SIGNAL(clicked()), this, SLOT(slotCheckDisabled()) );
}
FileWizardDialog::FileWizardDialog(QWidget *parent) :
Wizard(parent),
m_filePage(new FileWizardPage)
{
setWindowFlags(windowFlags() & ~Qt::WindowContextHelpButtonHint);
setOption(QWizard::NoCancelButton, false);
setOption(QWizard::NoDefaultButton, false);
if (HostOsInfo::isMacHost()) {
setButtonLayout(QList<QWizard::WizardButton>()
<< QWizard::CancelButton
<< QWizard::Stretch
<< QWizard::BackButton
<< QWizard::NextButton
<< QWizard::CommitButton
<< QWizard::FinishButton);
}
const int filePageId = addPage(m_filePage);
wizardProgress()->item(filePageId)->setTitle(tr("Location"));
connect(m_filePage, SIGNAL(activated()), button(QWizard::FinishButton), SLOT(animateClick()));
}
void ExportWizard::setPage(int pageId)
{
// adapt buttons
QList<QWizard::WizardButton> layout;
layout << QWizard::Stretch << QWizard::BackButton;
if (pageId >= PageWallpaper && pageId <= PagePdf)
layout << QWizard::FinishButton;
layout << QWizard::CancelButton;
setButtonLayout(layout);
// change page
m_nextId = pageId;
next();
// execute on-entry code
switch (pageId) {
case PageImage:
if (m_ui->filePath->text().isEmpty())
slotChoosePath();
break;
case PagePdf:
if (!m_pdfPrinter) {
m_pdfPrinter = new QPrinter;
m_pdfPrinter->setOutputFormat(QPrinter::PdfFormat);
m_pdfPrinter->setResolution(m_canvas->modeInfo()->printDpi());
m_pdfPrinter->setPaperSize(canvasNatInches(), QPrinter::Inch);
m_pdfPrinter->setPageMargins(0, 0, 0, 0, QPrinter::Inch);
//m_pdfPrinter->setOutputFileName("/tmp/aa.pdf");
initPageSizeNames();
slotPdfUpdateGui();
}
if (m_pdfPrinter->outputFileName().isEmpty())
slotChoosePdfPath();
break;
case PageSvg:
if (m_ui->svgFilePath->text().isEmpty())
slotChooseSvgPath();
break;
}
}
void WizardMain::init(QWidget *parent) {
lastPage=0;
//setWindowFlags(Qt::CustomizeWindowHint | Qt::WindowTitleHint); //The titlebar is customized to delete the close button. NOT USED, DECENTRALIZES THE WIZARD ON THE SCREEN.
//If false, the wizard will be launch from s2 page.
if(mode==false) {
//The first wizard page is visible only if launched from console in wizard mode,
//parent is NULL only if the wizard is launched by main.
if(parent == NULL) {
addPage(new WizardGui_s0);
lastPage++; //The last page is incremented to identify the last page id.
}
addPage(new WizardGui_s1);
lastPage++;
}
addPage(new WizardGui_s2);
addPage(new WizardGui_s3);
lastPage++;
connect(page(lastPage-1), SIGNAL(reportSent()),this, SLOT(wizardReportSent())); //A pointer to the WizardGui_s2 is set, the class will emit the reportSent() SIGNAL when the report is sent and should be saved on file.
QList<QWizard::WizardButton> layout;
layout << QWizard::Stretch << QWizard::Stretch << QWizard::Stretch << QWizard::Stretch << QWizard::CancelButton << QWizard::BackButton << QWizard::Stretch << QWizard::NextButton << QWizard::FinishButton;
setOption(QWizard::NoBackButtonOnStartPage, true);
setOption(QWizard::NoBackButtonOnLastPage, true);
setOption(QWizard::NoCancelButton);
setButtonLayout(layout);
setWindowTitle(tr("OpenGooDebugToolSender"));
setWindowIcon(QIcon(":/res/images/res/icon.png"));
}
DvdWizard::DvdWizard(MonitorManager *manager, const QString &url, QWidget *parent) :
QWizard(parent)
, m_dvdauthor(NULL)
, m_mkiso(NULL)
, m_vobitem(NULL)
, m_burnMenu(new QMenu(this))
{
setWindowTitle(i18n("DVD Wizard"));
//setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
m_pageVob = new DvdWizardVob(this);
m_pageVob->setTitle(i18n("Select Files For Your DVD"));
addPage(m_pageVob);
m_pageChapters = new DvdWizardChapters(manager, m_pageVob->dvdFormat(), this);
m_pageChapters->setTitle(i18n("DVD Chapters"));
addPage(m_pageChapters);
if (!url.isEmpty()) m_pageVob->setUrl(url);
connect(m_pageVob, SIGNAL(prepareMonitor()), this, SLOT(slotprepareMonitor()));
m_pageMenu = new DvdWizardMenu(m_pageVob->dvdFormat(), this);
m_pageMenu->setTitle(i18n("Create DVD Menu"));
addPage(m_pageMenu);
QWizardPage *page4 = new QWizardPage;
page4->setTitle(i18n("Creating DVD Image"));
m_status.setupUi(page4);
m_status.error_box->setHidden(true);
m_status.error_box->setTabBarHidden(true);
m_status.tmp_folder->setUrl(KUrl(KdenliveSettings::currenttmpfolder()));
m_status.tmp_folder->setMode(KFile::Directory | KFile::ExistingOnly);
m_status.iso_image->setUrl(KUrl(QDir::homePath() + "/untitled.iso"));
m_status.iso_image->setFilter("*.iso");
m_status.iso_image->setMode(KFile::File);
m_status.iso_image->fileDialog()->setOperationMode(KFileDialog::Saving);
#if KDE_IS_VERSION(4,7,0)
m_isoMessage = new KMessageWidget;
QGridLayout *s = static_cast <QGridLayout*> (page4->layout());
s->addWidget(m_isoMessage, 5, 0, 1, -1);
m_isoMessage->hide();
#endif
addPage(page4);
connect(this, SIGNAL(currentIdChanged(int)), this, SLOT(slotPageChanged(int)));
connect(m_status.button_start, SIGNAL(clicked()), this, SLOT(slotGenerate()));
connect(m_status.button_abort, SIGNAL(clicked()), this, SLOT(slotAbort()));
connect(m_status.button_preview, SIGNAL(clicked()), this, SLOT(slotPreview()));
QString programName("k3b");
QString exec = KStandardDirs::findExe(programName);
if (!exec.isEmpty()) {
//Add K3b action
QAction *k3b = m_burnMenu->addAction(KIcon(programName), i18n("Burn with %1", programName), this, SLOT(slotBurn()));
k3b->setData(exec);
}
programName = "brasero";
exec = KStandardDirs::findExe(programName);
if (!exec.isEmpty()) {
//Add Brasero action
QAction *brasero = m_burnMenu->addAction(KIcon(programName), i18n("Burn with %1", programName), this, SLOT(slotBurn()));
brasero->setData(exec);
}
if (m_burnMenu->isEmpty()) m_burnMenu->addAction(i18n("No burning program found (K3b, Brasero)"));
m_status.button_burn->setMenu(m_burnMenu);
m_status.button_burn->setIcon(KIcon("tools-media-optical-burn"));
m_status.button_burn->setToolButtonStyle(Qt::ToolButtonTextBesideIcon);
m_status.button_preview->setIcon(KIcon("media-playback-start"));
setButtonText(QWizard::CustomButton1, i18n("Load"));
setButtonText(QWizard::CustomButton2, i18n("Save"));
button(QWizard::CustomButton1)->setIcon(KIcon("document-open"));
button(QWizard::CustomButton2)->setIcon(KIcon("document-save"));
connect(button(QWizard::CustomButton1), SIGNAL(clicked()), this, SLOT(slotLoad()));
connect(button(QWizard::CustomButton2), SIGNAL(clicked()), this, SLOT(slotSave()));
setOption(QWizard::HaveCustomButton1, true);
setOption(QWizard::HaveCustomButton2, true);
QList<QWizard::WizardButton> layout;
layout << QWizard::CustomButton1 << QWizard::CustomButton2 << QWizard::Stretch << QWizard::BackButton << QWizard::NextButton << QWizard::CancelButton << QWizard::FinishButton;
setButtonLayout(layout);
}
