void processTxState(softSerial_t *softSerial)
{
uint8_t mask;
if (!softSerial->isTransmittingData) {
char byteToSend;
if (isSoftSerialTransmitBufferEmpty((serialPort_t *)softSerial)) {
return;
}
// data to send
byteToSend = softSerial->port.txBuffer[softSerial->port.txBufferTail++];
if (softSerial->port.txBufferTail >= softSerial->port.txBufferSize) {
softSerial->port.txBufferTail = 0;
}
// build internal buffer, MSB = Stop Bit (1) + data bits (MSB to LSB) + start bit(0) LSB
softSerial->internalTxBuffer = (1 << (TX_TOTAL_BITS - 1)) | (byteToSend << 1);
softSerial->bitsLeftToTransmit = TX_TOTAL_BITS;
softSerial->isTransmittingData = true;
return;
}
if (softSerial->bitsLeftToTransmit) {
mask = softSerial->internalTxBuffer & 1;
softSerial->internalTxBuffer >>= 1;
setTxSignal(softSerial, mask);
softSerial->bitsLeftToTransmit--;
return;
}
serialPort_t *openSoftSerial(softSerialPortIndex_e portIndex, serialReceiveCallbackPtr callback, uint32_t baud, portOptions_t options)
{
softSerial_t *softSerial = &(softSerialPorts[portIndex]);
#ifdef USE_SOFTSERIAL1
if (portIndex == SOFTSERIAL1) {
softSerial->rxTimerHardware = &(timerHardware[SOFTSERIAL_1_TIMER_RX_HARDWARE]);
softSerial->txTimerHardware = &(timerHardware[SOFTSERIAL_1_TIMER_TX_HARDWARE]);
}
#endif
#ifdef USE_SOFTSERIAL2
if (portIndex == SOFTSERIAL2) {
softSerial->rxTimerHardware = &(timerHardware[SOFTSERIAL_2_TIMER_RX_HARDWARE]);
softSerial->txTimerHardware = &(timerHardware[SOFTSERIAL_2_TIMER_TX_HARDWARE]);
}
#endif
softSerial->port.vTable = softSerialVTable;
softSerial->port.baudRate = baud;
softSerial->port.mode = MODE_RXTX;
softSerial->port.options = options;
softSerial->port.callback = callback;
resetBuffers(softSerial);
softSerial->isTransmittingData = false;
softSerial->isSearchingForStartBit = true;
softSerial->rxBitIndex = 0;
softSerial->transmissionErrors = 0;
softSerial->receiveErrors = 0;
softSerial->softSerialPortIndex = portIndex;
softSerial->txIO = IOGetByTag(softSerial->txTimerHardware->tag);
serialOutputPortConfig(softSerial->txTimerHardware->tag, portIndex);
softSerial->rxIO = IOGetByTag(softSerial->rxTimerHardware->tag);
serialInputPortConfig(softSerial->rxTimerHardware->tag, portIndex);
setTxSignal(softSerial, ENABLE);
delay(50);
serialTimerTxConfig(softSerial->txTimerHardware, portIndex, baud);
serialTimerRxConfig(softSerial->rxTimerHardware, portIndex, options);
return &softSerial->port;
}
serialPort_t *openSoftSerial(softSerialPortIndex_e portIndex, serialReceiveCallbackPtr callback, uint32_t baud, serialInversion_e inversion)
{
softSerial_t *softSerial = &(softSerialPorts[portIndex]);
if (portIndex == SOFTSERIAL1) {
softSerial->rxTimerHardware = &(timerHardware[SOFT_SERIAL_1_TIMER_RX_HARDWARE]);
softSerial->txTimerHardware = &(timerHardware[SOFT_SERIAL_1_TIMER_TX_HARDWARE]);
}
if (portIndex == SOFTSERIAL2) {
softSerial->rxTimerHardware = &(timerHardware[SOFT_SERIAL_2_TIMER_RX_HARDWARE]);
softSerial->txTimerHardware = &(timerHardware[SOFT_SERIAL_2_TIMER_TX_HARDWARE]);
}
softSerial->port.vTable = softSerialVTable;
softSerial->port.baudRate = baud;
softSerial->port.mode = MODE_RXTX;
softSerial->port.inversion = inversion;
softSerial->port.callback = callback;
resetBuffers(softSerial);
softSerial->isTransmittingData = false;
softSerial->isSearchingForStartBit = true;
softSerial->rxBitIndex = 0;
softSerial->transmissionErrors = 0;
softSerial->receiveErrors = 0;
softSerial->softSerialPortIndex = portIndex;
serialOutputPortConfig(softSerial->txTimerHardware);
serialInputPortConfig(softSerial->rxTimerHardware);
setTxSignal(softSerial, ENABLE);
delay(50);
serialTimerTxConfig(softSerial->txTimerHardware, portIndex, baud);
serialTimerRxConfig(softSerial->rxTimerHardware, portIndex, inversion);
return &softSerial->port;
}
void processTxState(softSerial_t *softSerial)
{
uint8_t mask;
if (!softSerial->isTransmittingData) {
if (isSoftSerialTransmitBufferEmpty((serialPort_t *)softSerial)) {
// Transmit buffer empty.
// Start listening if not already in if half-duplex
if (!softSerial->rxActive && softSerial->port.options & SERIAL_BIDIR) {
serialOutputPortDeActivate(softSerial);
serialInputPortActivate(softSerial);
}
return;
}
// data to send
uint8_t byteToSend = softSerial->port.txBuffer[softSerial->port.txBufferTail++];
if (softSerial->port.txBufferTail >= softSerial->port.txBufferSize) {
softSerial->port.txBufferTail = 0;
}
// build internal buffer, MSB = Stop Bit (1) + data bits (MSB to LSB) + start bit(0) LSB
softSerial->internalTxBuffer = (1 << (TX_TOTAL_BITS - 1)) | (byteToSend << 1);
softSerial->bitsLeftToTransmit = TX_TOTAL_BITS;
softSerial->isTransmittingData = true;
if (softSerial->rxActive && (softSerial->port.options & SERIAL_BIDIR)) {
// Half-duplex: Deactivate receiver, activate transmitter
serialInputPortDeActivate(softSerial);
serialOutputPortActivate(softSerial);
}
return;
}
if (softSerial->bitsLeftToTransmit) {
mask = softSerial->internalTxBuffer & 1;
softSerial->internalTxBuffer >>= 1;
setTxSignal(softSerial, mask);
softSerial->bitsLeftToTransmit--;
return;
}
serialPort_t *openEscSerial(escSerialPortIndex_e portIndex, serialReceiveCallbackPtr callback, uint16_t output, uint32_t baud, portOptions_t options, uint8_t mode)
{
escSerial_t *escSerial = &(escSerialPorts[portIndex]);
escSerial->rxTimerHardware = &(timerHardware[output]);
escSerial->txTimerHardware = &(timerHardware[ESCSERIAL_TIMER_TX_HARDWARE]);
escSerial->port.vTable = escSerialVTable;
escSerial->port.baudRate = baud;
escSerial->port.mode = MODE_RXTX;
escSerial->port.options = options;
escSerial->port.callback = callback;
resetBuffers(escSerial);
escSerial->isTransmittingData = false;
escSerial->isSearchingForStartBit = true;
escSerial->rxBitIndex = 0;
escSerial->transmissionErrors = 0;
escSerial->receiveErrors = 0;
escSerial->receiveTimeout = 0;
escSerial->escSerialPortIndex = portIndex;
serialInputPortConfig(escSerial->rxTimerHardware);
setTxSignal(escSerial, ENABLE);
delay(50);
if(mode==0){
serialTimerTxConfig(escSerial->txTimerHardware, portIndex);
serialTimerRxConfig(escSerial->rxTimerHardware, portIndex);
}
if(mode==1){
serialTimerTxConfigBL(escSerial->txTimerHardware, portIndex, baud);
serialTimerRxConfigBL(escSerial->rxTimerHardware, portIndex, options);
}
return &escSerial->port;
}
void setupSoftSerial1(uint32_t baud, uint8_t inverted)
{
int portIndex = 0;
softSerial_t *softSerial = &(softSerialPorts[portIndex]);
softSerial->port.vTable = softSerialVTable;
softSerial->port.mode = MODE_RXTX;
softSerial->port.baudRate = baud;
softSerial->isInverted = inverted;
//softSerial->rxTimerHardware = &(timerHardware[SOFT_SERIAL_1_TIMER_RX_HARDWARE]);
//softSerial->txTimerHardware = &(timerHardware[SOFT_SERIAL_1_TIMER_TX_HARDWARE]);
softSerial->port.rxBufferSize = SOFT_SERIAL_BUFFER_SIZE;
softSerial->port.rxBuffer = softSerial->rxBuffer;
softSerial->port.rxBufferTail = 0;
softSerial->port.rxBufferHead = 0;
softSerial->port.txBuffer = softSerial->txBuffer;
softSerial->port.txBufferSize = SOFT_SERIAL_BUFFER_SIZE,
softSerial->port.txBufferTail = 0;
softSerial->port.txBufferHead = 0;
softSerial->isTransmittingData = false;
softSerial->isSearchingForStartBit = true;
softSerial->isSearchingForStopBit = false;
softSerial->timerRxCounter = 1;
serialInputPortConfig(softSerial->rxTimerHardware);
serialOutputPortConfig(softSerial->txTimerHardware);
setTxSignal(softSerial, 1);
delay(50);
serialTimerConfig(softSerial->rxTimerHardware, baud, portIndex, onSerialTimer);
}
void processTxState(softSerial_t *softSerial)
{
char mask;
if (!softSerial->isTransmittingData) {
char byteToSend;
if (isSoftSerialTransmitBufferEmpty((serialPort_t *)softSerial)) {
return;
}
// data to send
byteToSend = softSerial->port.txBuffer[softSerial->port.txBufferTail++];
if (softSerial->port.txBufferTail >= softSerial->port.txBufferSize) {
softSerial->port.txBufferTail = 0;
}
// build internal buffer, start bit(1) + data bits + stop bit(0)
softSerial->internalTxBuffer = (1 << (TX_TOTAL_BITS - 1)) | (byteToSend << 1);
softSerial->bitsLeftToTransmit = TX_TOTAL_BITS;
// start immediately
softSerial->timerTxCounter = 1;
softSerial->isTransmittingData = true;
return;
}
if (--softSerial->timerTxCounter <= 0) {
mask = softSerial->internalTxBuffer & 1;
softSerial->internalTxBuffer >>= 1;
setTxSignal(softSerial, mask);
softSerial->timerTxCounter = TICKS_PER_BIT;
if (--softSerial->bitsLeftToTransmit <= 0) {
softSerial->isTransmittingData = false;
}
}
serialPort_t *openSoftSerial(softSerialPortIndex_e portIndex, serialReceiveCallbackPtr rxCallback, uint32_t baud, portMode_t mode, portOptions_t options)
{
softSerial_t *softSerial = &(softSerialPorts[portIndex]);
int pinCfgIndex = portIndex + RESOURCE_SOFT_OFFSET;
ioTag_t tagRx = serialPinConfig()->ioTagRx[pinCfgIndex];
ioTag_t tagTx = serialPinConfig()->ioTagTx[pinCfgIndex];
const timerHardware_t *timerRx = timerGetByTag(tagRx, TIM_USE_ANY);
const timerHardware_t *timerTx = timerGetByTag(tagTx, TIM_USE_ANY);
IO_t rxIO = IOGetByTag(tagRx);
IO_t txIO = IOGetByTag(tagTx);
if (options & SERIAL_BIDIR) {
// If RX and TX pins are both assigned, we CAN use either with a timer.
// However, for consistency with hardware UARTs, we only use TX pin,
// and this pin must have a timer.
if (!timerTx)
return NULL;
softSerial->timerHardware = timerTx;
softSerial->txIO = txIO;
softSerial->rxIO = txIO;
IOInit(txIO, OWNER_SERIAL_TX, RESOURCE_INDEX(portIndex) + RESOURCE_SOFT_OFFSET);
} else {
if (mode & MODE_RX) {
// Need a pin & a timer on RX
if (!(tagRx && timerRx))
return NULL;
softSerial->rxIO = rxIO;
softSerial->timerHardware = timerRx;
IOInit(rxIO, OWNER_SERIAL_RX, RESOURCE_INDEX(portIndex) + RESOURCE_SOFT_OFFSET);
}
if (mode & MODE_TX) {
// Need a pin on TX
if (!tagTx)
return NULL;
softSerial->txIO = txIO;
if (!(mode & MODE_RX)) {
// TX Simplex, must have a timer
if (!timerTx)
return NULL;
softSerial->timerHardware = timerTx;
} else {
// Duplex
softSerial->exTimerHardware = timerTx;
}
IOInit(txIO, OWNER_SERIAL_TX, RESOURCE_INDEX(portIndex) + RESOURCE_SOFT_OFFSET);
}
}
softSerial->port.vTable = &softSerialVTable;
softSerial->port.baudRate = baud;
softSerial->port.mode = mode;
softSerial->port.options = options;
softSerial->port.rxCallback = rxCallback;
resetBuffers(softSerial);
softSerial->softSerialPortIndex = portIndex;
softSerial->transmissionErrors = 0;
softSerial->receiveErrors = 0;
softSerial->rxActive = false;
softSerial->isTransmittingData = false;
// Configure master timer (on RX); time base and input capture
serialTimerConfigureTimebase(softSerial->timerHardware, baud);
timerChConfigIC(softSerial->timerHardware, (options & SERIAL_INVERTED) ? ICPOLARITY_RISING : ICPOLARITY_FALLING, 0);
// Initialize callbacks
timerChCCHandlerInit(&softSerial->edgeCb, onSerialRxPinChange);
timerChOvrHandlerInit(&softSerial->overCb, onSerialTimerOverflow);
// Configure bit clock interrupt & handler.
// If we have an extra timer (on TX), it is initialized and configured
// for overflow interrupt.
// Receiver input capture is configured when input is activated.
if ((mode & MODE_TX) && softSerial->exTimerHardware && softSerial->exTimerHardware->tim != softSerial->timerHardware->tim) {
softSerial->timerMode = TIMER_MODE_DUAL;
serialTimerConfigureTimebase(softSerial->exTimerHardware, baud);
timerChConfigCallbacks(softSerial->exTimerHardware, NULL, &softSerial->overCb);
timerChConfigCallbacks(softSerial->timerHardware, &softSerial->edgeCb, NULL);
} else {
softSerial->timerMode = TIMER_MODE_SINGLE;
timerChConfigCallbacks(softSerial->timerHardware, &softSerial->edgeCb, &softSerial->overCb);
}
#ifdef USE_HAL_DRIVER
softSerial->timerHandle = timerFindTimerHandle(softSerial->timerHardware->tim);
#endif
if (!(options & SERIAL_BIDIR)) {
serialOutputPortActivate(softSerial);
setTxSignal(softSerial, ENABLE);
}
serialInputPortActivate(softSerial);
return &softSerial->port;
}
void processTxState(escSerial_t *escSerial)
{
uint8_t mask;
static uint8_t bitq=0, transmitStart=0;
if (escSerial->isReceivingData) {
return;
}
if(transmitStart==0)
{
setTxSignal(escSerial, 1);
}
if (!escSerial->isTransmittingData) {
char byteToSend;
reload:
if (isEscSerialTransmitBufferEmpty((serialPort_t *)escSerial)) {
// canreceive
transmitStart=0;
return;
}
if(transmitStart<3)
{
if(transmitStart==0)
byteToSend = 0xff;
if(transmitStart==1)
byteToSend = 0xff;
if(transmitStart==2)
byteToSend = 0x7f;
transmitStart++;
}
else{
// data to send
byteToSend = escSerial->port.txBuffer[escSerial->port.txBufferTail++];
if (escSerial->port.txBufferTail >= escSerial->port.txBufferSize) {
escSerial->port.txBufferTail = 0;
}
}
// build internal buffer, data bits (MSB to LSB)
escSerial->internalTxBuffer = byteToSend;
escSerial->bitsLeftToTransmit = 8;
escSerial->isTransmittingData = true;
//set output
serialOutputPortConfig(escSerial->rxTimerHardware);
return;
}
if (escSerial->bitsLeftToTransmit) {
mask = escSerial->internalTxBuffer & 1;
if(mask)
{
if(bitq==0 || bitq==1)
{
setTxSignal(escSerial, 1);
}
if(bitq==2 || bitq==3)
{
setTxSignal(escSerial, 0);
}
}
else
{
if(bitq==0 || bitq==2)
{
setTxSignal(escSerial, 1);
}
if(bitq==1 ||bitq==3)
{
setTxSignal(escSerial, 0);
}
}
bitq++;
if(bitq>3)
{
escSerial->internalTxBuffer >>= 1;
escSerial->bitsLeftToTransmit--;
bitq=0;
if(escSerial->bitsLeftToTransmit==0)
{
goto reload;
}
}
