/*
* Make a hard link to a file.
* The VFS layer should prevent this being called unless both
* vnodes are ours.
*
* Locking: locks both vnodes, parent first. Since we aren't allowed
* to hardlink directories, the target can't be an ancestor of the
* directory we're working in.
*
* Requires up to 4 buffers.
*/
static
int
sfs_link(struct vnode *dir, const char *name, struct vnode *file)
{
struct sfs_vnode *sv = dir->vn_data;
struct sfs_vnode *f = file->vn_data;
struct sfs_dinode *inodeptr;
int result;
KASSERT(file->vn_fs == dir->vn_fs);
/* Hard links to directories aren't allowed. */
if (f->sv_type == SFS_TYPE_DIR) {
return EINVAL;
}
KASSERT(file != dir);
reserve_buffers(SFS_BLOCKSIZE);
/* directory must be locked first */
lock_acquire(sv->sv_lock);
lock_acquire(f->sv_lock);
result = sfs_dinode_load(f);
if (result) {
lock_release(f->sv_lock);
lock_release(sv->sv_lock);
unreserve_buffers(SFS_BLOCKSIZE);
return result;
}
/* Create the link */
result = sfs_dir_link(sv, name, f->sv_ino, NULL);
if (result) {
sfs_dinode_unload(f);
lock_release(f->sv_lock);
lock_release(sv->sv_lock);
unreserve_buffers(SFS_BLOCKSIZE);
return result;
}
/* and update the link count, marking the inode dirty */
inodeptr = sfs_dinode_map(f);
inodeptr->sfi_linkcount++;
sfs_dinode_mark_dirty(f);
sfs_dinode_unload(f);
lock_release(f->sv_lock);
lock_release(sv->sv_lock);
unreserve_buffers(SFS_BLOCKSIZE);
return 0;
}
/*
* Called for stat/fstat/lstat.
*
* Locking: gets/releases vnode lock.
*
* Requires 1 buffer.
*/
static
int
sfs_stat(struct vnode *v, struct stat *statbuf)
{
struct sfs_vnode *sv = v->vn_data;
struct sfs_dinode *inodeptr;
int result;
/* Fill in the stat structure */
bzero(statbuf, sizeof(struct stat));
result = VOP_GETTYPE(v, &statbuf->st_mode);
if (result) {
return result;
}
lock_acquire(sv->sv_lock);
reserve_buffers(SFS_BLOCKSIZE);
result = sfs_dinode_load(sv);
if (result) {
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
inodeptr = sfs_dinode_map(sv);
statbuf->st_size = inodeptr->sfi_size;
statbuf->st_nlink = inodeptr->sfi_linkcount;
/* We don't support this yet */
statbuf->st_blocks = 0;
/* Fill in other fields as desired/possible... */
sfs_dinode_unload(sv);
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return 0;
}
/*
* Delete a file.
*
* Locking: locks the directory, then the file. Unlocks both.
* This follows the hierarchical locking order imposed by the directory tree.
*
* Requires up to 4 buffers.
*/
static
int
sfs_remove(struct vnode *dir, const char *name)
{
struct sfs_vnode *sv = dir->vn_data;
struct sfs_vnode *victim;
struct sfs_dinode *victim_inodeptr;
struct sfs_dinode *dir_inodeptr;
int slot;
int result;
/* need to check this to avoid deadlock even in error condition */
if (!strcmp(name, ".") || !strcmp(name, "..")) {
return EISDIR;
}
lock_acquire(sv->sv_lock);
reserve_buffers(SFS_BLOCKSIZE);
result = sfs_dinode_load(sv);
if (result) {
goto out_buffers;
}
dir_inodeptr = sfs_dinode_map(sv);
if (dir_inodeptr->sfi_linkcount == 0) {
result = ENOENT;
goto out_loadsv;
}
/* Look for the file and fetch a vnode for it. */
result = sfs_lookonce(sv, name, &victim, &slot);
if (result) {
goto out_loadsv;
}
lock_acquire(victim->sv_lock);
result = sfs_dinode_load(victim);
if (result) {
lock_release(victim->sv_lock);
VOP_DECREF(&victim->sv_absvn);
goto out_loadsv;
}
victim_inodeptr = sfs_dinode_map(victim);
KASSERT(victim_inodeptr->sfi_linkcount > 0);
/* Not allowed on directories */
if (victim_inodeptr->sfi_type == SFS_TYPE_DIR) {
result = EISDIR;
goto out_reference;
}
/* Erase its directory entry. */
result = sfs_dir_unlink(sv, slot);
if (result) {
goto out_reference;
}
/* Decrement the link count. */
KASSERT(victim_inodeptr->sfi_linkcount > 0);
victim_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(victim);
out_reference:
/* Discard the reference that sfs_lookonce got us */
sfs_dinode_unload(victim);
lock_release(victim->sv_lock);
VOP_DECREF(&victim->sv_absvn);
out_loadsv:
sfs_dinode_unload(sv);
out_buffers:
lock_release(sv->sv_lock);
unreserve_buffers(SFS_BLOCKSIZE);
return result;
}
/*
* Delete a directory.
*
* Locking: Acquires vnode lock for parent dir and then vnode lock for
* victim dir. Releases both.
*
* Requires 4 buffers.
*/
static
int
sfs_rmdir(struct vnode *v, const char *name)
{
struct sfs_vnode *sv = v->vn_data;
struct sfs_fs *sfs = sv->sv_absvn.vn_fs->fs_data;
struct sfs_vnode *victim;
struct sfs_dinode *dir_inodeptr;
struct sfs_dinode *victim_inodeptr;
int result, result2;
int slot;
/* Cannot remove the . or .. entries from a directory! */
if (!strcmp(name, ".") || !strcmp(name, "..")) {
return EINVAL;
}
lock_acquire(sv->sv_lock);
reserve_buffers(SFS_BLOCKSIZE);
result = sfs_dinode_load(sv);
if (result) {
goto die_loadsv;
}
dir_inodeptr = sfs_dinode_map(sv);
if (dir_inodeptr->sfi_linkcount == 0) {
result = ENOENT;
goto die_linkcount;
}
result = sfs_lookonce(sv, name, &victim, &slot);
if (result) {
goto die_linkcount;
}
lock_acquire(victim->sv_lock);
result = sfs_dinode_load(victim);
if (result) {
goto die_loadvictim;
}
victim_inodeptr = sfs_dinode_map(victim);
if (victim->sv_ino == SFS_ROOTDIR_INO) {
result = EPERM;
goto die_total;
}
/* Only allowed on directories */
if (victim_inodeptr->sfi_type != SFS_TYPE_DIR) {
result = ENOTDIR;
goto die_total;
}
result = sfs_dir_checkempty(victim);
if (result) {
goto die_total;
}
result = sfs_dir_unlink(sv, slot);
if (result) {
goto die_total;
}
KASSERT(dir_inodeptr->sfi_linkcount > 1);
KASSERT(victim_inodeptr->sfi_linkcount==2);
dir_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(sv);
victim_inodeptr->sfi_linkcount -= 2;
sfs_dinode_mark_dirty(victim);
result = sfs_itrunc(victim, 0);
if (result) {
victim_inodeptr->sfi_linkcount += 2;
dir_inodeptr->sfi_linkcount++;
result2 = sfs_dir_link(sv, name, victim->sv_ino, NULL);
if (result2) {
/* XXX: would be better if this case didn't exist */
panic("sfs: %s: rmdir: %s; while recovering: %s\n",
sfs->sfs_sb.sb_volname,
strerror(result), strerror(result2));
}
goto die_total;
}
die_total:
sfs_dinode_unload(victim);
die_loadvictim:
lock_release(victim->sv_lock);
VOP_DECREF(&victim->sv_absvn);
die_linkcount:
sfs_dinode_unload(sv);
die_loadsv:
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
static
int
sfs_mkdir(struct vnode *v, const char *name, mode_t mode)
{
struct sfs_fs *sfs = v->vn_fs->fs_data;
struct sfs_vnode *sv = v->vn_data;
int result;
uint32_t ino;
struct sfs_dinode *dir_inodeptr;
struct sfs_dinode *new_inodeptr;
struct sfs_vnode *newguy;
(void)mode;
lock_acquire(sv->sv_lock);
reserve_buffers(SFS_BLOCKSIZE);
result = sfs_dinode_load(sv);
if (result) {
goto die_early;
}
dir_inodeptr = sfs_dinode_map(sv);
if (dir_inodeptr->sfi_linkcount == 0) {
result = ENOENT;
goto die_simple;
}
/* Look up the name */
result = sfs_dir_findname(sv, name, &ino, NULL, NULL);
if (result!=0 && result!=ENOENT) {
goto die_simple;
}
/* If it exists, fail */
if (result==0) {
result = EEXIST;
goto die_simple;
}
/*
* If we're trying to create . or .. and we get this far
* (meaning the entry in question is missing), the fs is
* corrupted. Let's not make it worse. Best at this point to
* bail out and run fsck.
*/
if (!strcmp(name, ".") || !strcmp(name, "..")) {
panic("sfs: %s: No %s entry in dir %u; please fsck\n",
sfs->sfs_sb.sb_volname, name, sv->sv_ino);
}
result = sfs_makeobj(sfs, SFS_TYPE_DIR, &newguy);
if (result) {
goto die_simple;
}
new_inodeptr = sfs_dinode_map(newguy);
result = sfs_dir_link(newguy, ".", newguy->sv_ino, NULL);
if (result) {
goto die_uncreate;
}
result = sfs_dir_link(newguy, "..", sv->sv_ino, NULL);
if (result) {
goto die_uncreate;
}
result = sfs_dir_link(sv, name, newguy->sv_ino, NULL);
if (result) {
goto die_uncreate;
}
/*
* Increment link counts (Note: not until after the names are
* added - that way if one fails, the link count will be zero,
* and reclaim will dispose of the new directory.
*
* Note also that the name in the parent directory gets added
* last, so there's no case in which we have to go back and
* remove it.
*/
new_inodeptr->sfi_linkcount += 2;
dir_inodeptr->sfi_linkcount++;
sfs_dinode_mark_dirty(newguy);
sfs_dinode_mark_dirty(sv);
sfs_dinode_unload(newguy);
sfs_dinode_unload(sv);
lock_release(newguy->sv_lock);
lock_release(sv->sv_lock);
VOP_DECREF(&newguy->sv_absvn);
unreserve_buffers(SFS_BLOCKSIZE);
KASSERT(result==0);
return result;
die_uncreate:
sfs_dinode_unload(newguy);
lock_release(newguy->sv_lock);
VOP_DECREF(&newguy->sv_absvn);
die_simple:
sfs_dinode_unload(sv);
die_early:
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
/*
* Create a file. If EXCL is set, insist that the filename not already
* exist; otherwise, if it already exists, just open it.
*
* Locking: Gets/releases the vnode lock for v. Does not lock the new vnode,
* as nobody else can get to it except by searching the directory it's in,
* which is locked.
*
* Requires up to 4 buffers as VOP_DECREF invocations may take 3.
*/
static
int
sfs_creat(struct vnode *v, const char *name, bool excl, mode_t mode,
struct vnode **ret)
{
struct sfs_fs *sfs = v->vn_fs->fs_data;
struct sfs_vnode *sv = v->vn_data;
struct sfs_vnode *newguy;
struct sfs_dinode *sv_dino;
struct sfs_dinode *new_dino;
uint32_t ino;
int result;
lock_acquire(sv->sv_lock);
reserve_buffers(SFS_BLOCKSIZE);
result = sfs_dinode_load(sv);
if (result) {
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
sv_dino = sfs_dinode_map(sv);
if (sv_dino->sfi_linkcount == 0) {
sfs_dinode_unload(sv);
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return ENOENT;
}
sfs_dinode_unload(sv);
/* Look up the name */
result = sfs_dir_findname(sv, name, &ino, NULL, NULL);
if (result!=0 && result!=ENOENT) {
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
/* If it exists and we didn't want it to, fail */
if (result==0 && excl) {
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return EEXIST;
}
if (result==0) {
/* We got something; load its vnode and return */
result = sfs_loadvnode(sfs, ino, SFS_TYPE_INVAL, &newguy);
if (result) {
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
*ret = &newguy->sv_absvn;
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return 0;
}
/* Didn't exist - create it */
result = sfs_makeobj(sfs, SFS_TYPE_FILE, &newguy);
if (result) {
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sv->sv_lock);
return result;
}
/* sfs_makeobj loads the inode for us */
new_dino = sfs_dinode_map(newguy);
/* We don't currently support file permissions; ignore MODE */
(void)mode;
/* Link it into the directory */
result = sfs_dir_link(sv, name, newguy->sv_ino, NULL);
if (result) {
sfs_dinode_unload(newguy);
lock_release(newguy->sv_lock);
VOP_DECREF(&newguy->sv_absvn);
lock_release(sv->sv_lock);
unreserve_buffers(SFS_BLOCKSIZE);
return result;
}
/* Update the linkcount of the new file */
new_dino->sfi_linkcount++;
/* and consequently mark it dirty. */
sfs_dinode_mark_dirty(newguy);
*ret = &newguy->sv_absvn;
sfs_dinode_unload(newguy);
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(newguy->sv_lock);
lock_release(sv->sv_lock);
return 0;
}
/*
* Rename a file.
*
* Locking:
* Locks sfs_renamelock.
* Calls check_parent, which locks various directories one at a
* time.
* Locks the target vnodes and their parents in a complex fashion
* (described in detail below) which is carefully arranged so
* it won't deadlock with rmdir. Or at least I hope so.
* Then unlocks everything.
*
* The rationale for all this is complex. See the comments below.
*
* Requires up to 7 buffers.
*/
static
int
sfs_rename(struct vnode *absdir1, const char *name1,
struct vnode *absdir2, const char *name2)
{
struct sfs_fs *sfs = absdir1->vn_fs->fs_data;
struct sfs_vnode *dir1 = absdir1->vn_data;
struct sfs_vnode *dir2 = absdir2->vn_data;
struct sfs_vnode *obj1=NULL, *obj2=NULL;
struct sfs_dinode *dir1_inodeptr, *dir2_inodeptr;
struct sfs_dinode *obj1_inodeptr, *obj2_inodeptr;
int slot1=-1, slot2=-1;
int result, result2;
struct sfs_direntry sd;
int found_dir1;
/* make gcc happy */
obj2_inodeptr = NULL;
/* The VFS layer is supposed to enforce this */
KASSERT(absdir1->vn_fs == absdir2->vn_fs);
if (!strcmp(name1, ".") || !strcmp(name2, ".") ||
!strcmp(name1, "..") || !strcmp(name2, "..")) {
return EINVAL;
}
if (strlen(name2)+1 > sizeof(sd.sfd_name)) {
return ENAMETOOLONG;
}
/*
* We only allow one rename to occur at a time. This appears
* to be necessary to preserve the consistency of the
* filesystem: once you do the parent check (that n1 is not an
* ancestor of d2/n2) nothing may be allowed to happen that
* might invalidate that result until all of the
* rearrangements are complete. If other renames are allowed
* to proceed, we'd need to lock every descendent of n1 to
* make sure that some ancestor of d2/n2 doesn't get inserted
* at some point deep down. This is impractical, so we use one
* global lock.
*
* To prevent certain deadlocks while locking the vnodes we
* need, the rename lock goes outside all the vnode locks.
*/
reserve_buffers(SFS_BLOCKSIZE);
lock_acquire(sfs->sfs_renamelock);
/*
* Get the objects we're moving.
*
* Lock each directory temporarily. We'll check again later to
* make sure they haven't disappeared and to find slots.
*/
lock_acquire(dir1->sv_lock);
result = sfs_lookonce(dir1, name1, &obj1, NULL);
lock_release(dir1->sv_lock);
if (result) {
goto out0;
}
lock_acquire(dir2->sv_lock);
result = sfs_lookonce(dir2, name2, &obj2, NULL);
lock_release(dir2->sv_lock);
if (result && result != ENOENT) {
goto out0;
}
if (result==ENOENT) {
/*
* sfs_lookonce returns a null vnode with ENOENT in
* order to make our life easier.
*/
KASSERT(obj2==NULL);
}
/*
* Prohibit the case where obj1 is a directory and it's a direct
* ancestor in the tree of dir2 (or is the same as dir2). If
* that were to be permitted, it'd create a detached chunk of
* the directory tree, and we don't like that.
*
* If we see dir1 while checking up the tree, found_dir1 is
* set to true. We use this info to choose the correct ordering
* for locking dir1 and dir2.
*
* To prevent deadlocks, the parent check must be done without
* holding locks on any other directories.
*/
result = check_parent(dir1, obj1, dir2, &found_dir1);
if (result) {
goto out0;
}
/*
* Now check for cases where some of the four vnodes we have
* are the same.
*
* These cases are, in the order they are handled below:
*
* dir1 == obj1 Already checked.
* dir2 == obj2 Already checked.
* dir2 == obj1 Already checked.
* dir1 == obj2 Checked below.
* dir1 == dir2 Legal.
* obj1 == obj2 Legal, special handling.
*/
/*
* A directory should have no entries for itself other than '.'.
* Thus, since we explicitly reject '.' above, the names
* within the directories should not refer to the directories
* themselves.
*/
KASSERT(dir1 != obj1);
KASSERT(dir2 != obj2);
/*
* The parent check should have caught this case.
*/
KASSERT(dir2 != obj1);
/*
* Check for dir1 == obj2.
*
* This is not necessarily wrong if obj1 is the last entry in
* dir1 (this is essentially "mv ./foo/bar ./foo") but our
* implementation doesn't tolerate it. Because we need to
* unlink g2 before linking g1 in the new place, it will
* always fail complaining that g2 (sv1) isn't empty. We could
* just charge ahead and let this happen, but we'll get into
* trouble with our locks if we do, so detect this as a
* special case and return ENOTEMPTY.
*/
if (obj2==dir1) {
result = ENOTEMPTY;
goto out0;
}
/*
* Now we can begin acquiring locks for real.
*
* If we saw dir1 while doing the parent check, it means
* dir1 is higher in the tree than dir2. Thus, we should
* lock dir1 before dir2.
*
* If on the other hand we didn't see dir1, either dir2 is
* higher in the tree than dir1, in which case we should lock
* dir2 first, or dir1 and dir2 are on disjoint branches of
* the tree, in which case (because there's a single rename
* lock for the whole fs) it doesn't matter what order we lock
* in.
*
* If we lock dir1 first, we don't need to lock obj1 before
* dir2, since (due to the parent check) obj1 cannot be an
* ancestor of dir2.
*
* However, if we lock dir2 first, obj2 must be locked before
* dir1, in case obj2 is an ancestor of dir1. (In this case we
* will find that obj2 is not empty and cannot be removed, but
* we must lock it before we can check that.)
*
* Thus we lock in this order:
*
* dir1 (if found_dir1)
* dir2
* obj2 (if non-NULL)
* dir1 (if !found_dir1)
* obj1
*
* Also, look out for the case where both dirs are the same.
* (If this is true, found_dir1 will be set.)
*/
if (dir1==dir2) {
/* This locks "both" dirs */
lock_acquire(dir1->sv_lock);
KASSERT(found_dir1);
}
else {
if (found_dir1) {
lock_acquire(dir1->sv_lock);
}
lock_acquire(dir2->sv_lock);
}
/*
* Now lock obj2.
*
* Note that we must redo the lookup and get a new obj2, as it
* may have changed under us. Since we hold the rename lock
* for the whole fs, the fs structure cannot have changed, so
* we don't need to redo the parent check or any of the checks
* for vnode aliasing with dir1 or dir2 above. Note however
* that obj1 and obj2 may now be the same even if they weren't
* before.
*/
KASSERT(lock_do_i_hold(dir2->sv_lock));
if (obj2) {
VOP_DECREF(&obj2->sv_absvn);
obj2 = NULL;
}
result = sfs_lookonce(dir2, name2, &obj2, &slot2);
if (result==0) {
KASSERT(obj2 != NULL);
lock_acquire(obj2->sv_lock);
result = sfs_dinode_load(obj2);
if (result) {
/* ENOENT would confuse us below; but it can't be */
KASSERT(result != ENOENT);
lock_release(obj2->sv_lock);
VOP_DECREF(&obj2->sv_absvn);
/* continue to check below */
}
else {
obj2_inodeptr = sfs_dinode_map(obj2);
}
}
else if (result==ENOENT) {
/*
* sfs_lookonce returns a null vnode and an empty slot
* with ENOENT in order to make our life easier.
*/
KASSERT(obj2==NULL);
KASSERT(slot2>=0);
}
if (!found_dir1) {
lock_acquire(dir1->sv_lock);
}
/* Postpone this check to simplify the error cleanup. */
if (result != 0 && result != ENOENT) {
goto out1;
}
/*
* Now reload obj1.
*/
KASSERT(lock_do_i_hold(dir1->sv_lock));
VOP_DECREF(&obj1->sv_absvn);
obj1 = NULL;
result = sfs_lookonce(dir1, name1, &obj1, &slot1);
if (result) {
goto out1;
}
/*
* POSIX mandates that if obj1==obj2, we succeed and nothing
* happens. This is somewhat stupid if obj1==obj2 and dir1 != dir2,
* but we'll go with POSIX anyway.
*/
if (obj1==obj2) {
result = 0;
VOP_DECREF(&obj1->sv_absvn);
obj1 = NULL;
goto out1;
}
lock_acquire(obj1->sv_lock);
result = sfs_dinode_load(obj1);
if (result) {
lock_release(obj1->sv_lock);
VOP_DECREF(&obj1->sv_absvn);
obj1 = NULL;
goto out1;
}
obj1_inodeptr = sfs_dinode_map(obj1);
result = sfs_dinode_load(dir2);
if (result) {
goto out2;
}
dir2_inodeptr = sfs_dinode_map(dir2);
result = sfs_dinode_load(dir1);
if (result) {
goto out3;
}
dir1_inodeptr = sfs_dinode_map(dir1);
/*
* One final piece of paranoia: make sure dir2 hasn't been rmdir'd.
* (If dir1 was, the obj1 lookup above would have failed.)
*/
if (dir2_inodeptr->sfi_linkcount==0) {
result = ENOENT;
goto out4;
}
/*
* Now we have all the locks we need and we can proceed with
* the operation.
*/
/* At this point we should have valid slots in both dirs. */
KASSERT(slot1>=0);
KASSERT(slot2>=0);
if (obj2 != NULL) {
/*
* Target already exists.
* Must be the same type (file or directory) as the source,
* and if a directory, must be empty. Then unlink it.
*/
if (obj1_inodeptr->sfi_type == SFS_TYPE_DIR) {
if (obj2_inodeptr->sfi_type != SFS_TYPE_DIR) {
result = ENOTDIR;
goto out4;
}
result = sfs_dir_checkempty(obj2);
if (result) {
goto out4;
}
/* Remove the name */
result = sfs_dir_unlink(dir2, slot2);
if (result) {
goto out4;
}
/* Dispose of the directory */
KASSERT(dir2_inodeptr->sfi_linkcount > 1);
KASSERT(obj2_inodeptr->sfi_linkcount == 2);
dir2_inodeptr->sfi_linkcount--;
obj2_inodeptr->sfi_linkcount -= 2;
sfs_dinode_mark_dirty(dir2);
sfs_dinode_mark_dirty(obj2);
/* ignore errors on this */
sfs_itrunc(obj2, 0);
}
else {
KASSERT(obj1->sv_type == SFS_TYPE_FILE);
if (obj2->sv_type != SFS_TYPE_FILE) {
result = EISDIR;
goto out4;
}
/* Remove the name */
result = sfs_dir_unlink(dir2, slot2);
if (result) {
goto out4;
}
/* Dispose of the file */
KASSERT(obj2_inodeptr->sfi_linkcount > 0);
obj2_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(obj2);
}
sfs_dinode_unload(obj2);
lock_release(obj2->sv_lock);
VOP_DECREF(&obj2->sv_absvn);
obj2 = NULL;
}
/*
* At this point the target should be nonexistent and we have
* a slot in the target directory we can use. Create a link
* there. Do it by hand instead of using sfs_dir_link to avoid
* duplication of effort.
*/
KASSERT(obj2==NULL);
bzero(&sd, sizeof(sd));
sd.sfd_ino = obj1->sv_ino;
strcpy(sd.sfd_name, name2);
result = sfs_writedir(dir2, slot2, &sd);
if (result) {
goto out4;
}
obj1_inodeptr->sfi_linkcount++;
sfs_dinode_mark_dirty(obj1);
if (obj1->sv_type == SFS_TYPE_DIR && dir1 != dir2) {
/* Directory: reparent it */
result = sfs_readdir(obj1, DOTDOTSLOT, &sd);
if (result) {
goto recover1;
}
if (strcmp(sd.sfd_name, "..")) {
panic("sfs: %s: rename: moving dir: .. is not "
"in slot %d\n", sfs->sfs_sb.sb_volname,
DOTDOTSLOT);
}
if (sd.sfd_ino != dir1->sv_ino) {
panic("sfs: %s: rename: moving dir: .. is i%u "
"and not i%u\n", sfs->sfs_sb.sb_volname,
sd.sfd_ino, dir1->sv_ino);
}
sd.sfd_ino = dir2->sv_ino;
result = sfs_writedir(obj1, DOTDOTSLOT, &sd);
if (result) {
goto recover1;
}
dir1_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(dir1);
dir2_inodeptr->sfi_linkcount++;
sfs_dinode_mark_dirty(dir2);
}
result = sfs_dir_unlink(dir1, slot1);
if (result) {
goto recover2;
}
obj1_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(obj1);
KASSERT(result==0);
if (0) {
/* Only reached on error */
recover2:
if (obj1->sv_type == SFS_TYPE_DIR) {
sd.sfd_ino = dir1->sv_ino;
result2 = sfs_writedir(obj1, DOTDOTSLOT, &sd);
if (result2) {
recovermsg(sfs->sfs_sb.sb_volname,
result, result2);
}
dir1_inodeptr->sfi_linkcount++;
sfs_dinode_mark_dirty(dir1);
dir2_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(dir2);
}
recover1:
result2 = sfs_dir_unlink(dir2, slot2);
if (result2) {
recovermsg(sfs->sfs_sb.sb_volname,
result, result2);
}
obj1_inodeptr->sfi_linkcount--;
sfs_dinode_mark_dirty(obj1);
}
out4:
sfs_dinode_unload(dir1);
out3:
sfs_dinode_unload(dir2);
out2:
sfs_dinode_unload(obj1);
lock_release(obj1->sv_lock);
out1:
if (obj2) {
sfs_dinode_unload(obj2);
lock_release(obj2->sv_lock);
}
lock_release(dir1->sv_lock);
if (dir1 != dir2) {
lock_release(dir2->sv_lock);
}
out0:
if (obj2 != NULL) {
VOP_DECREF(&obj2->sv_absvn);
}
if (obj1 != NULL) {
VOP_DECREF(&obj1->sv_absvn);
}
unreserve_buffers(SFS_BLOCKSIZE);
lock_release(sfs->sfs_renamelock);
return result;
}
/*
* This is much the same as sfs_partialio, but intended for use with
* metadata (e.g. directory entries). It assumes the objects being
* handled are smaller than whole blocks, do not cross block
* boundaries, and originate in the kernel.
*
* It is separate from sfs_partialio because, although there is no
* such code in this version of SFS, it is often desirable when doing
* more advanced things to handle metadata and user data I/O
* differently.
*/
int
sfs_metaio(struct sfs_vnode *sv, off_t actualpos, void *data, size_t len,
enum uio_rw rw)
{
struct sfs_fs *sfs = sv->sv_absvn.vn_fs->fs_data;
struct sfs_dinode *dino;
off_t endpos;
uint32_t vnblock;
uint32_t blockoffset;
daddr_t diskblock;
struct buf *iobuf;
char *ioptr;
bool doalloc;
int result;
KASSERT(lock_do_i_hold(sv->sv_lock));
/* Figure out which block of the vnode (directory, whatever) this is */
vnblock = actualpos / SFS_BLOCKSIZE;
blockoffset = actualpos % SFS_BLOCKSIZE;
result = sfs_dinode_load(sv);
if (result) {
return result;
}
dino = sfs_dinode_map(sv);
/* Get the disk block number */
doalloc = (rw == UIO_WRITE);
result = sfs_bmap(sv, vnblock, doalloc, &diskblock);
if (result) {
sfs_dinode_unload(sv);
return result;
}
if (diskblock == 0) {
/* Should only get block 0 back if doalloc is false */
KASSERT(rw == UIO_READ);
/* Sparse file, read as zeros. */
bzero(data, len);
sfs_dinode_unload(sv);
return 0;
}
/* Read the block */
result = buffer_read(&sfs->sfs_absfs, diskblock, SFS_BLOCKSIZE,
&iobuf);
if (result) {
/*
* XXX: if we allocated, do we need to discard
* the block we allocated? urgh...
*/
sfs_dinode_unload(sv);
return result;
}
ioptr = buffer_map(iobuf);
if (rw == UIO_READ) {
/* Copy out the selected region */
memcpy(data, ioptr + blockoffset, len);
}
else {
// Journal this!!!
ioptr = buffer_map(iobuf);
void *old_data = ioptr + blockoffset;
sfs_jphys_write_wrapper(sfs, /*context*/ NULL,
jentry_meta_update( diskblock,
blockoffset,
len,
old_data,
data));
/* Update the selected region */
memcpy(ioptr + blockoffset, data, len);
buffer_mark_dirty(iobuf); // Journalled (meta_update)
/* Update the vnode size if needed */
endpos = actualpos + len;
if (endpos > (off_t)dino->sfi_size) {
sfs_jphys_write_wrapper(sfs, NULL,
jentry_resize( sv->sv_ino, // disk_addr
dino->sfi_size, // old_size
endpos)); // new_size
dino->sfi_size = endpos;
sfs_dinode_mark_dirty(sv);
}
}
buffer_release(iobuf);
sfs_dinode_unload(sv);
/* Done */
return 0;
}
/*
* Do I/O of a whole region of data, whether or not it's block-aligned.
*
* Locking: must hold vnode lock. May get/release sfs_freemaplock.
*
* Requires up to 3 buffers.
*/
int
sfs_io(struct sfs_vnode *sv, struct uio *uio)
{
uint32_t blkoff;
uint32_t nblocks, i;
int result = 0;
uint32_t origresid, extraresid = 0;
struct sfs_dinode *inodeptr;
KASSERT(lock_do_i_hold(sv->sv_lock));
origresid = uio->uio_resid;
result = sfs_dinode_load(sv);
if (result) {
return result;
}
inodeptr = sfs_dinode_map(sv);
/*
* If reading, check for EOF. If we can read a partial area,
* remember how much extra there was in EXTRARESID so we can
* add it back to uio_resid at the end.
*/
if (uio->uio_rw == UIO_READ) {
off_t size, endpos;
size = inodeptr->sfi_size;
endpos = uio->uio_offset + uio->uio_resid;
if (uio->uio_offset >= size) {
/* At or past EOF - just return */
sfs_dinode_unload(sv);
return 0;
}
if (endpos > size) {
extraresid = endpos - size;
KASSERT(uio->uio_resid > extraresid);
uio->uio_resid -= extraresid;
}
}
/*
* First, do any leading partial block.
*/
blkoff = uio->uio_offset % SFS_BLOCKSIZE;
if (blkoff != 0) {
/* Number of bytes at beginning of block to skip */
uint32_t skip = blkoff;
/* Number of bytes to read/write after that point */
uint32_t len = SFS_BLOCKSIZE - blkoff;
/* ...which might be less than the rest of the block */
if (len > uio->uio_resid) {
len = uio->uio_resid;
}
/* Call sfs_partialio() to do it. */
result = sfs_partialio(sv, uio, skip, len);
if (result) {
goto out;
}
}
/* If we're done, quit. */
if (uio->uio_resid==0) {
goto out;
}
/*
* Now we should be block-aligned. Do the remaining whole blocks.
*/
KASSERT(uio->uio_offset % SFS_BLOCKSIZE == 0);
nblocks = uio->uio_resid / SFS_BLOCKSIZE;
for (i=0; i<nblocks; i++) {
result = sfs_blockio(sv, uio);
if (result) {
goto out;
}
}
/*
* Now do any remaining partial block at the end.
*/
KASSERT(uio->uio_resid < SFS_BLOCKSIZE);
if (uio->uio_resid > 0) {
result = sfs_partialio(sv, uio, 0, uio->uio_resid);
if (result) {
goto out;
}
}
out:
/* If writing and we did anything, adjust file length */
if (uio->uio_resid != origresid &&
uio->uio_rw == UIO_WRITE &&
uio->uio_offset > (off_t)inodeptr->sfi_size) {
sfs_jphys_write_wrapper(sv->sv_absvn.vn_fs->fs_data, NULL,
jentry_resize( sv->sv_ino, // disk_addr
inodeptr->sfi_size, // old_size
uio->uio_offset)); // new_size
inodeptr->sfi_size = uio->uio_offset;
sfs_dinode_mark_dirty(sv);
}
sfs_dinode_unload(sv);
/* Add in any extra amount we couldn't read because of EOF */
uio->uio_resid += extraresid;
/* Done */
return result;
}
