Exemplos de simpliciti_main_sync em C++ (Cpp)

Exemplo n.º 1

Arquivo: main.c Projeto: svenKautlenbach/msp430-high-speed-mote

static void stubSendAcceleration()
{
	open_radio();

    // Set SimpliciTI mode
    sRFsmpl.mode = SIMPLICITI_ACCELERATION;

    // Set SimpliciTI timeout to save battery power
    sRFsmpl.timeout2 = SIMPLICITI_TIMEOUT2;

    if (simpliciti_link())
    {

    	simpliciti_main_sync();

        setFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA);

    	simpliciti_main_tx_only();
    }

    // Set SimpliciTI state to OFF
    sRFsmpl.mode = SIMPLICITI_OFF;

    close_radio();
}

Exemplo n.º 2

Arquivo: rfsimpliciti.c Projeto: bhimebau/paindiary

// *************************************************************************************************
// @fn          start_simpliciti_sync
// @brief       Start SimpliciTI (sync mode).
// @param       none
// @return      none
// *************************************************************************************************
void start_simpliciti_sync(void)
{
    // Clear LINE1
    clear_line(LINE1);
    fptr_lcd_function_line1(LINE1, DISPLAY_LINE_CLEAR);

    // Stop data logging and close session
    stop_datalog();

    // Turn on beeper icon to show activity
    display_symbol(LCD_ICON_BEEPER1, SEG_ON_BLINK_ON);
    display_symbol(LCD_ICON_BEEPER2, SEG_ON_BLINK_ON);
    display_symbol(LCD_ICON_BEEPER3, SEG_ON_BLINK_ON);

    // Prepare radio for RF communication
    open_radio();

    // Set SimpliciTI mode
    sRFsmpl.mode = SIMPLICITI_SYNC;

    // Set SimpliciTI timeout to save battery power
    sRFsmpl.timeout = SIMPLICITI_TIMEOUT;

    // Start SimpliciTI stack. Try to link to access point.
    // Exit with timeout or by a DOWN button press.
    if (simpliciti_link())
    {
        // Enter sync routine. This will send ready-to-receive packets at regular intervals to the
        // access point.
        // The access point always replies a command (NOP if no other command is set)
        simpliciti_main_sync();
    }

    // Set SimpliciTI state to OFF
    sRFsmpl.mode = SIMPLICITI_OFF;

    // Powerdown radio
    close_radio();

    // Clear last button events
    Timer0_A4_Delay(CONV_MS_TO_TICKS(BUTTONS_DEBOUNCE_TIME_OUT));
    BUTTONS_IFG = 0x00;
    button.all_flags = 0;

    // Clear icons
    display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
    display_symbol(LCD_ICON_BEEPER2, SEG_OFF_BLINK_OFF);
    display_symbol(LCD_ICON_BEEPER3, SEG_OFF_BLINK_OFF);

    // Force full display update
    display.flag.full_update = 1;
}

Exemplo n.º 3

Arquivo: rfsimpliciti.c Projeto: lboroEESE-12ELD002/12ELD002-Group-I

// *************************************************************************************************
// @fn          start_simpliciti_sync
// @brief       Start SimpliciTI (sync mode). 
// @param       none
// @return      none
// *************************************************************************************************
void start_simpliciti_sync(void)
{
  	

	display_symbol(LCD_ICON_BEEPER1, SEG_ON_BLINK_ON);
	
	// Debounce button event
	//Timer0_A4_Delay(CONV_MS_TO_TICKS(BUTTONS_DEBOUNCE_TIME_OUT));

	// Prepare radio for RF communication
	open_radio();

	// Set SimpliciTI mode
	sRFsmpl.mode = SIMPLICITI_SYNC;
	
	// Set SimpliciTI timeout to save battery power
	sRFsmpl.timeout = SIMPLICITI_TIMEOUT; 
		
	// Start SimpliciTI stack. Try to link to access point.
	// Exit with timeout or by a button DOWN press.
	if (simpliciti_link())
	{
		// Enter sync routine. This will send ready-to-receive packets at regular intervals to the access point.
		// The access point replies with a command (NOP if no other command is set)
		simpliciti_main_sync();
	}

	// Set SimpliciTI state to OFF
	sRFsmpl.mode = SIMPLICITI_OFF;

	// Powerdown radio
	close_radio();
	
	
	BUTTONS_IFG = 0x00;  
	button.all_flags = 0;
	
	// Clear icons
	display_symbol(LCD_ICON_BEEPER1, SEG_OFF_BLINK_OFF);
	
	
}