static void setup_card(struct snd_usb_caiaqdev *dev)
{
int ret;
char val[4];
/* device-specific startup specials */
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
/* RigKontrol2 - display centered dash ('-') */
val[0] = 0x00;
val[1] = 0x00;
val[2] = 0x01;
send_command(dev, EP1_CMD_WRITE_IO, val, 3);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
/* RigKontrol2 - display two centered dashes ('--') */
val[0] = 0x00;
val[1] = 0x40;
val[2] = 0x40;
val[3] = 0x00;
send_command(dev, EP1_CMD_WRITE_IO, val, 4);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
/* Audio Kontrol 1 - make USB-LED stop blinking */
val[0] = 0x00;
send_command(dev, EP1_CMD_WRITE_IO, val, 1);
break;
}
ret = snd_usb_caiaq_audio_init(dev);
if (ret < 0)
log("Unable to set up audio system (ret=%d)\n", ret);
ret = snd_usb_caiaq_midi_init(dev);
if (ret < 0)
log("Unable to set up MIDI system (ret=%d)\n", ret);
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
ret = snd_usb_caiaq_input_init(dev);
if (ret < 0)
log("Unable to set up input system (ret=%d)\n", ret);
#endif
/* finally, register the card and all its sub-instances */
ret = snd_card_register(dev->chip.card);
if (ret < 0) {
log("snd_card_register() returned %d\n", ret);
snd_card_free(dev->chip.card);
}
}
static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
{
int ret;
char val[4];
/* device-specific startup specials */
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
/* RigKontrol2 - display centered dash ('-') */
val[0] = 0x00;
val[1] = 0x00;
val[2] = 0x01;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
/* RigKontrol2 - display two centered dashes ('--') */
val[0] = 0x00;
val[1] = 0x40;
val[2] = 0x40;
val[3] = 0x00;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
/* Audio Kontrol 1 - make USB-LED stop blinking */
val[0] = 0x00;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
/* Audio 8 DJ - trigger read of current settings */
dev->control_state[0] = 0xff;
snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0);
snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0);
if (!wait_event_timeout(dev->ep1_wait_queue,
dev->control_state[0] != 0xff, HZ))
return;
/* fix up some defaults */
if ((dev->control_state[1] != 2) ||
(dev->control_state[2] != 3) ||
(dev->control_state[4] != 2)) {
dev->control_state[1] = 2;
dev->control_state[2] = 3;
dev->control_state[4] = 2;
snd_usb_caiaq_send_command(dev,
EP1_CMD_WRITE_IO, dev->control_state, 6);
}
break;
}
if (dev->spec.num_analog_audio_out +
dev->spec.num_analog_audio_in +
dev->spec.num_digital_audio_out +
dev->spec.num_digital_audio_in > 0) {
ret = snd_usb_caiaq_audio_init(dev);
if (ret < 0)
log("Unable to set up audio system (ret=%d)\n", ret);
}
if (dev->spec.num_midi_in +
dev->spec.num_midi_out > 0) {
ret = snd_usb_caiaq_midi_init(dev);
if (ret < 0)
log("Unable to set up MIDI system (ret=%d)\n", ret);
}
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
ret = snd_usb_caiaq_input_init(dev);
if (ret < 0)
log("Unable to set up input system (ret=%d)\n", ret);
#endif
/* finally, register the card and all its sub-instances */
ret = snd_card_register(dev->chip.card);
if (ret < 0) {
log("snd_card_register() returned %d\n", ret);
snd_card_free(dev->chip.card);
}
ret = snd_usb_caiaq_control_init(dev);
if (ret < 0)
log("Unable to set up control system (ret=%d)\n", ret);
}
static void __devinit setup_card(struct snd_usb_caiaqdev *dev)
{
int ret;
char val[4];
switch (dev->chip.usb_id) {
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2):
val[0] = 0x00;
val[1] = 0x00;
val[2] = 0x01;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 3);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3):
val[0] = 0x00;
val[1] = 0x40;
val[2] = 0x40;
val[3] = 0x00;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 4);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AK1):
val[0] = 0x00;
snd_usb_caiaq_send_command(dev, EP1_CMD_WRITE_IO, val, 1);
break;
case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
dev->control_state[0] = 0xff;
snd_usb_caiaq_set_auto_msg(dev, 1, 0, 0);
snd_usb_caiaq_send_command(dev, EP1_CMD_READ_IO, NULL, 0);
if (!wait_event_timeout(dev->ep1_wait_queue,
dev->control_state[0] != 0xff, HZ))
return;
if ((dev->control_state[1] != 2) ||
(dev->control_state[2] != 3) ||
(dev->control_state[4] != 2)) {
dev->control_state[1] = 2;
dev->control_state[2] = 3;
dev->control_state[4] = 2;
snd_usb_caiaq_send_command(dev,
EP1_CMD_WRITE_IO, dev->control_state, 6);
}
break;
}
if (dev->spec.num_analog_audio_out +
dev->spec.num_analog_audio_in +
dev->spec.num_digital_audio_out +
dev->spec.num_digital_audio_in > 0) {
ret = snd_usb_caiaq_audio_init(dev);
if (ret < 0)
log("Unable to set up audio system (ret=%d)\n", ret);
}
if (dev->spec.num_midi_in +
dev->spec.num_midi_out > 0) {
ret = snd_usb_caiaq_midi_init(dev);
if (ret < 0)
log("Unable to set up MIDI system (ret=%d)\n", ret);
}
#ifdef CONFIG_SND_USB_CAIAQ_INPUT
ret = snd_usb_caiaq_input_init(dev);
if (ret < 0)
log("Unable to set up input system (ret=%d)\n", ret);
#endif
ret = snd_card_register(dev->chip.card);
if (ret < 0) {
log("snd_card_register() returned %d\n", ret);
snd_card_free(dev->chip.card);
}
ret = snd_usb_caiaq_control_init(dev);
if (ret < 0)
log("Unable to set up control system (ret=%d)\n", ret);
}