/** @private */
SR_PRIV int serial_source_add(struct sr_session *session,
struct sr_serial_dev_inst *serial, int events, int timeout,
sr_receive_data_callback cb, void *cb_data)
{
struct sp_event_set *event_set;
gintptr poll_fd;
unsigned int poll_events;
enum sp_event mask = 0;
if ((events & (G_IO_IN|G_IO_ERR)) && (events & G_IO_OUT)) {
sr_err("Cannot poll input/error and output simultaneously.");
return SR_ERR_ARG;
}
if (sp_new_event_set(&event_set) != SP_OK)
return SR_ERR;
if (events & G_IO_IN)
mask |= SP_EVENT_RX_READY;
if (events & G_IO_OUT)
mask |= SP_EVENT_TX_READY;
if (events & G_IO_ERR)
mask |= SP_EVENT_ERROR;
if (sp_add_port_events(event_set, serial->data, mask) != SP_OK) {
sp_free_event_set(event_set);
return SR_ERR;
}
if (event_set->count != 1) {
sr_err("Unexpected number (%u) of event handles to poll.",
event_set->count);
sp_free_event_set(event_set);
return SR_ERR;
}
poll_fd = (gintptr) ((event_handle *)event_set->handles)[0];
mask = event_set->masks[0];
sp_free_event_set(event_set);
poll_events = 0;
if (mask & SP_EVENT_RX_READY)
poll_events |= G_IO_IN;
if (mask & SP_EVENT_TX_READY)
poll_events |= G_IO_OUT;
if (mask & SP_EVENT_ERROR)
poll_events |= G_IO_ERR;
/*
* Using serial->data as the key for the event source is not quite
* proper, as it makes it impossible to create another event source
* for the same serial port. However, these fixed keys will soon be
* removed from the API anyway, so this is OK for now.
*/
return sr_session_fd_source_add(session, serial->data,
poll_fd, poll_events, timeout, cb, cb_data);
}
SR_PRIV int serial_source_add(struct sr_session *session,
struct sr_serial_dev_inst *serial, int events, int timeout,
sr_receive_data_callback cb, void *cb_data)
{
enum sp_event mask = 0;
unsigned int i;
if (sp_new_event_set(&serial->event_set) != SP_OK)
return SR_ERR;
if (events & G_IO_IN)
mask |= SP_EVENT_RX_READY;
if (events & G_IO_OUT)
mask |= SP_EVENT_TX_READY;
if (events & G_IO_ERR)
mask |= SP_EVENT_ERROR;
if (sp_add_port_events(serial->event_set, serial->data, mask) != SP_OK) {
sp_free_event_set(serial->event_set);
return SR_ERR;
}
serial->pollfds = (GPollFD *) g_malloc0(sizeof(GPollFD) * serial->event_set->count);
for (i = 0; i < serial->event_set->count; i++) {
serial->pollfds[i].fd = ((event_handle *) serial->event_set->handles)[i];
mask = serial->event_set->masks[i];
if (mask & SP_EVENT_RX_READY)
serial->pollfds[i].events |= G_IO_IN;
if (mask & SP_EVENT_TX_READY)
serial->pollfds[i].events |= G_IO_OUT;
if (mask & SP_EVENT_ERROR)
serial->pollfds[i].events |= G_IO_ERR;
if (sr_session_source_add_pollfd(session, &serial->pollfds[i],
timeout, cb, cb_data) != SR_OK)
return SR_ERR;
}
return SR_OK;
}
int navilink_open_sp_port(struct sp_port* port, NavilinkDevice* device)
{
enum sp_return result = sp_open(port, SP_MODE_READ_WRITE);
if (result != SP_OK) {
CATCH_LIBSERIAL_ERROR(device);
goto error_cleanup_port;
}
struct sp_port_config* config = NULL;
result = sp_new_config(&config);
if (result != SP_OK) {
CATCH_LIBSERIAL_ERROR(device);
goto error_clean_config;
}
// Set the config
sp_set_baudrate(port, 115200);
sp_set_bits(port, 8);
sp_set_parity(port, SP_PARITY_NONE);
sp_set_stopbits(port, 1);
sp_set_flowcontrol(port, SP_FLOWCONTROL_NONE);
sp_set_config(port, config);
// Allocate events buffer
struct sp_event_set* event_set = NULL;
sp_new_event_set(&event_set);
sp_add_port_events(event_set, port, SP_EVENT_TX_READY);
//Wait for the port to be ready
result = sp_wait(event_set, 5000);
if (result != SP_OK) {
CATCH_LIBSERIAL_ERROR(device);
goto error_clean_event_set;
}
device->serial_port = port;
device->event_set = event_set;
//Check that this is a Navilink device
int res = navilink_check_protocol(device);
if (res < 0) {
goto error_clean_event_set;
}
// Retrieve the informations about the device
res = navilink_query_information(device, &device->informations);
if (res < 0) {
goto error_clean_event_set;
}
// Retrieve the firmware version
res = navilink_query_firmware_version(device, &device->firmware_version);
if (res < 0) {
goto error_clean_event_set;
}
return 0;
error_clean_event_set:
sp_free_event_set(event_set);
error_clean_config:
sp_free_config(config);
error_cleanup_port:
sp_free_port(port);
return -1;
}
