int spi_tx(int port, const uint8_t* buffer, int len, int block, int unknown) {
if(port > (NUM_SPIPORTS - 1)) {
return -1;
}
SET_REG(SPIRegs[port].control, GET_REG(SPIRegs[port].control) | (1 << 2));
SET_REG(SPIRegs[port].control, GET_REG(SPIRegs[port].control) | (1 << 3));
spi_info[port].txBuffer = buffer;
if(len > MAX_TX_BUFFER)
spi_info[port].txCurrentLen = MAX_TX_BUFFER;
else
spi_info[port].txCurrentLen = len;
spi_info[port].txTotalLen = len;
spi_info[port].txDone = FALSE;
if(unknown == 0) {
SET_REG(SPIRegs[port].cnt, 0);
}
spi_txdata(port, buffer, 0, spi_info[port].txCurrentLen);
SET_REG(SPIRegs[port].control, 1);
if(block) {
while(!spi_info[port].txDone || GET_BITS(GET_REG(SPIRegs[port].status), 4, 4) != 0) {
// yield
}
return len;
} else {
return 0;
}
}
int spi_tx(int port, const uint8_t* buffer, int len, int block, int unknown)
{
if(port >= SPICount || port < 0)
return -1;
SPIStruct *spi = &SPIData[port];
SET_REG(spi->registers->control, GET_REG(spi->registers->control) | (1 << 2));
SET_REG(spi->registers->control, GET_REG(spi->registers->control) | (1 << 3));
// Set len to number of words.
len = (len + ((1<<spi->wordSize)-1)) >> spi->wordSize;
spi->txBuffer = (void*)buffer;
spi->rxBuffer = NULL;
spi->txLength = len;
if(len > MAX_TX_BUFFER)
spi->txDone = MAX_TX_BUFFER;
else
spi->txDone = len;
if(unknown == 0) {
SET_REG(spi->registers->rxCount, 0);
}
else
{
spi->config |= 0x80;
}
//bufferPrintf("spi_tx(%d, %p, %d, %d, %d)\n", port, buffer, len, block, unknown);
spi_txdata(spi, buffer, 0, spi->txDone);
spi->config |= 0x200100;
SET_REG(spi->registers->txCount, len);
SET_REG(spi->registers->config, spi->config);
SET_REG(spi->registers->control, 1);
if(block)
{
while(spi->txBuffer != NULL || TX_BUFFER_LEFT(GET_REG(spi->registers->status)) > 0)
task_yield();
return len;
}
else
return 0;
}
int spi_txrx(int port, const uint8_t* outBuffer, int outLen, uint8_t* inBuffer, int inLen, int block)
{
if(port > (NUM_SPIPORTS - 1)) {
return -1;
}
SET_REG(SPIRegs[port].control, GET_REG(SPIRegs[port].control) | (1 << 2));
SET_REG(SPIRegs[port].control, GET_REG(SPIRegs[port].control) | (1 << 3));
spi_info[port].txBuffer = outBuffer;
if(outLen > MAX_TX_BUFFER)
spi_info[port].txCurrentLen = MAX_TX_BUFFER;
else
spi_info[port].txCurrentLen = outLen;
spi_info[port].txTotalLen = outLen;
spi_info[port].txDone = FALSE;
spi_info[port].rxBuffer = inBuffer;
spi_info[port].rxDone = FALSE;
spi_info[port].rxCurrentLen = 0;
spi_info[port].rxTotalLen = inLen;
spi_info[port].counter = 0;
spi_txdata(port, outBuffer, 0, spi_info[port].txCurrentLen);
SET_REG(SPIRegs[port].cnt, (inLen + ((1<<spi_info[port].wordSize)-1)) >> spi_info[port].wordSize);
SET_REG(SPIRegs[port].control, 1);
if(block) {
while(!spi_info[port].txDone || !spi_info[port].rxDone || GET_BITS(GET_REG(SPIRegs[port].status), 4, 4) != 0) {
// yield
}
return inLen;
} else {
return 0;
}
}
static void spiIRQHandler(uint32_t port) {
if(port > (NUM_SPIPORTS - 1)) {
return;
}
uint32_t status = GET_REG(SPIRegs[port].status);
if(status & (1 << 3)) {
spi_info[port].counter++;
}
if(status & (1 << 1)) {
while(TRUE) {
// take care of tx
if(spi_info[port].txBuffer != NULL) {
if(spi_info[port].txCurrentLen < spi_info[port].txTotalLen)
{
int toTX = spi_info[port].txTotalLen - spi_info[port].txCurrentLen;
int canTX = (MAX_TX_BUFFER - TX_BUFFER_LEFT(status)) << spi_info[port].wordSize;
if(toTX > canTX)
toTX = canTX;
spi_txdata(port, spi_info[port].txBuffer, spi_info[port].txCurrentLen, spi_info[port].txCurrentLen+toTX);
spi_info[port].txCurrentLen += toTX;
} else {
spi_info[port].txDone = TRUE;
spi_info[port].txBuffer = NULL;
}
}
dorx:
// take care of rx
if(spi_info[port].rxBuffer == NULL)
break;
int toRX = spi_info[port].rxTotalLen - spi_info[port].rxCurrentLen;
int canRX = GET_BITS(status, 8, 4) << spi_info[port].wordSize;
if(toRX > canRX)
toRX = canRX;
spi_rxdata(port, spi_info[port].rxBuffer, spi_info[port].rxCurrentLen, spi_info[port].rxCurrentLen+toRX);
spi_info[port].rxCurrentLen += toRX;
if(spi_info[port].rxCurrentLen < spi_info[port].rxTotalLen)
break;
spi_info[port].rxDone = TRUE;
spi_info[port].rxBuffer = NULL;
}
} else if(status & (1 << 0)) {
// jump into middle of the loop to handle rx only, stupidly
goto dorx;
}
// acknowledge interrupt handling complete
SET_REG(SPIRegs[port].status, status);
}
static void spi_irq_handler(uint32_t i)
{
SPIStruct *spi = &SPIData[i];
uint32_t status = GET_REG(spi->registers->status);
if((status & 1) && !(status & 0x400002))
goto do_rx;
else if(!(status & 0x400002))
goto complete;
while(TRUE)
{
if(spi->txBuffer != NULL)
{
uint32_t avail = MAX_TX_BUFFER - TX_BUFFER_LEFT(status);
uint32_t left = spi->txLength - spi->txDone;
if(avail > left)
avail = left;
spi_txdata(spi, spi->txBuffer, spi->txDone, spi->txDone + avail);
spi->txDone += avail;
if(spi->txDone >= spi->txLength)
{
spi->txBuffer = NULL;
spi->txLength = 0;
spi->txDone = 0;
spi->config &=~ 0x200000;
SET_REG(spi->registers->config, spi->config);
}
}
do_rx:
if(spi->rxBuffer != NULL)
{
uint32_t avail = RX_BUFFER_LEFT(status);
uint32_t left = spi->rxLength - spi->rxDone;
if(avail > left)
avail = left;
if(avail > 0)
{
spi_rxdata(spi, spi->rxBuffer, spi->rxDone, spi->rxDone + avail);
spi->rxDone += avail;
}
spi->rxDone += avail;
if(spi->rxDone >= spi->rxLength)
{
spi->rxBuffer = NULL;
spi->rxLength = 0;
spi->rxDone = 0;
spi->config &=~ 0x81;
SET_REG(spi->registers->config, spi->config);
}
}
complete:
if(spi->txBuffer == NULL && spi->rxBuffer == NULL)
{
spi->config &=~ 0x200181;
SET_REG(spi->registers->config, spi->config);
break;
}
else
break;
}
SET_REG(spi->registers->status, status);
}
