Exemplos de ssp_report_sensorhub_notice em C++ (Cpp)

Exemplo n.º 1

void reset_mcu(struct ssp_data *data)
{
	if (data->bSspShutdown == false) {
		data->bSspShutdown = true;
		disable_irq_wake(data->iIrq);
		disable_irq(data->iIrq);
	}

	toggle_mcu_reset(data);
	msleep(SSP_SW_RESET_TIME);
	data->bSspShutdown = false;

	if (initialize_mcu(data) < 0)
		return;

	sync_sensor_state(data);

	if (data->bSspShutdown == true) {
		data->bSspShutdown = false;
		enable_irq(data->iIrq);
		enable_irq_wake(data->iIrq);
	}

#ifdef CONFIG_SENSORS_SSP_SENSORHUB
	ssp_report_sensorhub_notice(data, MSG2SSP_AP_STATUS_RESET);
#endif
}

Exemplo n.º 2

Arquivo: ssp_dev.c Projeto: AndreiLux/Perseus-S3

static void ssp_late_resume(struct early_suspend *handler)
{
	struct ssp_data *data;
	data = container_of(handler, struct ssp_data, early_suspend);

	func_dbg();
	enable_debug_timer(data);

	data->bCheckSuspend = false;

#ifdef CONFIG_SENSORS_SSP_SENSORHUB
	/* give notice to user that AP goes to sleep */
	ssp_report_sensorhub_notice(data, MSG2SSP_AP_STATUS_WAKEUP);
	ssp_resume_mode(data);
#else
	if (atomic_read(&data->aSensorEnable) > 0)
		ssp_resume_mode(data);
#endif
}

Exemplo n.º 3

int forced_to_download_binary(struct ssp_data *data, int iBinType)
{
	int iRet = 0;

	ssp_dbg("[SSP]: %s - mcu binany update!\n", __func__);

	if (data->bSspShutdown == false) {
	data->bSspShutdown = true;
		disable_irq_wake(data->iIrq);
		disable_irq(data->iIrq);
	}

	iRet = update_mcu_bin(data, iBinType);
	if (iRet < 0) {
		iRet = ERROR;
		ssp_dbg("[SSP]: %s - update_mcu_bin failed!\n", __func__);
		goto out;
	}

	iRet = initialize_mcu(data);
	if (iRet < 0) {
		iRet = ERROR;
		ssp_dbg("[SSP]: %s - initialize_mcu failed!\n", __func__);
		goto out;
	}

	sync_sensor_state(data);

#ifdef CONFIG_SENSORS_SSP_SENSORHUB
	ssp_report_sensorhub_notice(data, MSG2SSP_AP_STATUS_RESET);
#endif

	if (data->bSspShutdown == true) {
		data->bSspShutdown = false;
		enable_irq(data->iIrq);
		enable_irq_wake(data->iIrq);
	}

	iRet = SUCCESS;
out:
	return iRet;
}

Exemplo n.º 4

Arquivo: mcu_at32uc3l0128.c Projeto: ausdim/boeffla-kernel-jb-u8-s3

ssize_t mcu_update_show(struct device *dev,
	struct device_attribute *attr, char *buf)
{
	bool bSuccess = false;
	int iRet = 0;
	struct ssp_data *data = dev_get_drvdata(dev);

	ssp_dbg("[SSP]: %s - mcu binany update!\n", __func__);

	disable_irq(data->iIrq);
	disable_irq_wake(data->iIrq);

	iRet = update_mcu_bin(data);
	if (iRet < 0) {
		ssp_dbg("[SSP]: %s - update_mcu_bin failed!\n", __func__);
		goto exit;
	}

	iRet = initialize_mcu(data);
	if (iRet < 0) {
		ssp_dbg("[SSP]: %s - initialize_mcu failed!\n", __func__);
		goto exit;
	}

	sync_sensor_state(data);

	enable_irq(data->iIrq);
	enable_irq_wake(data->iIrq);

#ifdef CONFIG_SENSORS_SSP_SENSORHUB
	ssp_report_sensorhub_notice(data, MSG2SSP_AP_STATUS_RESET);
#endif

	bSuccess = true;
exit:
	return sprintf(buf, "%s\n", (bSuccess ? "OK" : "NG"));
}