int board_app_initialize(uintptr_t arg)
{
int ret;
/* Register I2C drivers on behalf of the I2C tool */
stm32_i2ctool();
#ifdef CONFIG_CAN
/* Initialize CAN and register the CAN driver. */
ret = stm32_can_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. stm32_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = stm32_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef HAVE_USBMONITOR
/* Start the USB Monitor */
ret = usbmonitor_start();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to start USB monitor: %d\n", ret);
}
#endif
UNUSED(ret);
return OK;
}
int stm32_bringup(void)
{
#ifdef CONFIG_FS_PROCFS
int ret;
#ifdef CONFIG_STM32_CCM_PROCFS
/* Register the CCM procfs entry. This must be done before the procfs is
* mounted.
*/
(void)ccm_procfs_register();
#endif
/* Mount the procfs file system */
ret = mount(NULL, STM32_PROCFS_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to mount the PROC filesystem: %d (%d)\n",
ret, errno);
return ret;
}
#endif
#ifdef CONFIG_BUTTONS
/* Register the BUTTON driver */
ret = btn_lower_initialize("/dev/buttons");
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: btn_lower_initialize() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
return OK;
}
int stm32_bringup(void)
{
int ret;
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
int ret;
#ifdef HAVE_LEDS
/* Register the LED driver */
ret = userled_lower_initialize(LED_DRIVER_PATH);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n", ret);
return ret;
}
#endif
#ifdef CONFIG_PWM
/* Initialize PWM and register the PWM device. */
ret = stm32_pwm_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_pwm_setup() failed: %d\n", ret);
}
#endif
/* Contrairement à l'ADC, il n'y a pas de BOARDIOC_DAC_SETUP spécifique. Il
* faut le faire ici
*/
#ifdef HAVE_DAC
ret = board_dac_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: board_dac_setup() failed: %d\n", ret);
return ret;
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_CAN
/* Initialize CAN and register the CAN driver. */
ret = stm32_can_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
}
#endif
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
#ifdef CONFIG_STM32_SPI1
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
#endif
#ifdef NSH_HAVEMMCSD
FAR struct sdio_dev_s *sdio;
#endif
int ret;
/* Register I2C drivers on behalf of the I2C tool */
stm32_i2ctool();
/* Configure SPI-based devices */
#ifdef CONFIG_STM32_SPI1
/* Get the SPI port */
syslog(LOG_INFO, "Initializing SPI port 1\n");
spi = stm32_spibus_initialize(1);
if (!spi)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SPI port 0\n");
return -ENODEV;
}
syslog(LOG_INFO, "Successfully initialized SPI port 0\n");
/* Now bind the SPI interface to the M25P64/128 SPI FLASH driver */
syslog(LOG_INFO, "Bind SPI to the SPI flash driver\n");
mtd = m25p_initialize(spi);
if (!mtd)
{
syslog(LOG_ERR, "ERROR: Failed to bind SPI port 0 to the SPI FLASH driver\n");
return -ENODEV;
}
syslog(LOG_INFO, "Successfully bound SPI port 0 to the SPI FLASH driver\n");
#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
/* Create the SPI FLASH MTD instance */
/* The M25Pxx is not a give media to implement a file system..
* its block sizes are too large
*/
/* Mount the SDIO-based MMC/SD block driver */
#ifdef NSH_HAVEMMCSD
/* First, get an instance of the SDIO interface */
syslog(LOG_INFO, "Initializing SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!sdio)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
syslog(LOG_INFO, "Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
syslog(LOG_INFO, "Successfully bound SDIO to the MMC/SD driver\n");
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the STM3210E-EVAL board supports a GPIO to detect if there is a card in
* the slot.
*/
sdio_mediachange(sdio, true);
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_CAN
/* Initialize CAN and register the CAN driver. */
ret = stm32_can_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_DJOYSTICK
/* Initialize and register the joystick driver */
ret = stm32_djoy_initialization();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to register the joystick driver: %d\n", ret);
return ret;
}
syslog(LOG_INFO, "Successfully registered the joystick driver\n");
#endif
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
#ifdef HAVE_RTC_DRIVER
FAR struct rtc_lowerhalf_s *rtclower;
#endif
#ifdef CONFIG_QENCODER
int index;
char buf[9];
#endif
int ret;
(void)ret;
#ifdef CONFIG_SCHED_INSTRUMENTATION
/* Configure CPU load estimation */
cpuload_initialize_once();
#endif
#ifdef HAVE_PROC
/* Mount the proc filesystem */
syslog(LOG_INFO, "Mounting procfs to /proc\n");
ret = mount(NULL, CONFIG_NSH_PROC_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to mount the PROC filesystem: %d (%d)\n",
ret, errno);
return ret;
}
#endif
#ifdef HAVE_RTC_DRIVER
/* Instantiate the STM32L4 lower-half RTC driver */
rtclower = stm32l4_rtc_lowerhalf();
if (!rtclower)
{
serr("ERROR: Failed to instantiate the RTC lower-half driver\n");
return -ENOMEM;
}
else
{
/* Bind the lower half driver and register the combined RTC driver
* as /dev/rtc0
*/
ret = rtc_initialize(0, rtclower);
if (ret < 0)
{
serr("ERROR: Failed to bind/register the RTC driver: %d\n", ret);
return ret;
}
}
#endif
#ifdef HAVE_MMCSD
/* First, get an instance of the SDIO interface */
g_sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!g_sdio)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, g_sdio);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
ret);
return ret;
}
/* Then let's guess and say that there is a card in the slot. There is no
* card detect GPIO.
*/
sdio_mediachange(g_sdio, true);
syslog(LOG_INFO, "[boot] Initialized SDIO\n");
#endif
#ifdef CONFIG_PWM
/* Initialize PWM and register the PWM device. */
ret = stm32_pwm_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_pwm_setup() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_AJOYSTICK
/* Initialize and register the joystick driver */
ret = board_ajoy_initialize();
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the joystick driver: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_TIMER
/* Initialize and register the timer driver */
ret = board_timer_driver_initialize("/dev/timer0", 2);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the timer driver: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_QENCODER
/* Initialize and register the qencoder driver */
index = 0;
#ifdef CONFIG_STM32L4_TIM1_QE
sprintf(buf, "/dev/qe%d", index++);
ret = stm32l4_qencoder_initialize(buf, 1);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the qencoder: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_STM32L4_TIM2_QE
sprintf(buf, "/dev/qe%d", index++);
ret = stm32l4_qencoder_initialize(buf, 2);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the qencoder: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_STM32L4_TIM3_QE
sprintf(buf, "/dev/qe%d", index++);
ret = stm32l4_qencoder_initialize(buf, 3);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the qencoder: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_STM32L4_TIM4_QE
sprintf(buf, "/dev/qe%d", index++);
ret = stm32l4_qencoder_initialize(buf, 4);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the qencoder: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_STM32L4_TIM5_QE
sprintf(buf, "/dev/qe%d", index++);
ret = stm32l4_qencoder_initialize(buf, 5);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the qencoder: %d\n",
ret);
return ret;
}
#endif
#ifdef CONFIG_STM32L4_TIM8_QE
sprintf(buf, "/dev/qe%d", index++);
ret = stm32l4_qencoder_initialize(buf, 8);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to register the qencoder: %d\n",
ret);
return ret;
}
#endif
#endif
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
#ifdef HAVE_RTC_DRIVER
FAR struct rtc_lowerhalf_s *lower;
#endif
#ifdef CONFIG_STM32_SPI1
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
#endif
#ifdef HAVE_MMCSD
FAR struct sdio_dev_s *sdio;
#endif
int ret;
/* Register I2C drivers on behalf of the I2C tool */
stm32_i2ctool();
#ifdef HAVE_RTC_DRIVER
/* Instantiate the STM32 lower-half RTC driver */
lower = stm32_rtc_lowerhalf();
if (!lower)
{
syslog(LOG_ERR,
"ERROR: Failed to instantiate the RTC lower-half driver\n");
return -ENOMEM;
}
else
{
/* Bind the lower half driver and register the combined RTC driver
* as /dev/rtc0
*/
ret = rtc_initialize(0, lower);
if (ret < 0)
{
syslog(LOG_ERR,
"ERROR: Failed to bind/register the RTC driver: %d\n",
ret);
return ret;
}
}
#endif
/* Configure SPI-based devices */
#ifdef CONFIG_STM32_SPI1
/* Get the SPI port */
spi = stm32_spibus_initialize(1);
if (!spi)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SPI port 0\n");
return -ENODEV;
}
/* Now bind the SPI interface to the M25P64/128 SPI FLASH driver */
mtd = m25p_initialize(spi);
if (!mtd)
{
syslog(LOG_ERR,
"ERROR: Failed to bind SPI port 0 to the SPI FLASH driver\n");
return -ENODEV;
}
#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
/* Mount the SDIO-based MMC/SD block driver */
#ifdef HAVE_MMCSD
/* First, get an instance of the SDIO interface */
sdio = sdio_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!sdio)
{
syslog(LOG_ERR,
"ERROR: Failed to initialize SDIO slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDIO interface to the MMC/SD driver */
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
syslog(LOG_ERR,
"ERROR: Failed to bind SDIO to the MMC/SD driver: %d\n",
ret);
return ret;
}
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the STM3240G-EVAL board supports a GPIO to detect if there is a card in
* the slot.
*/
sdio_mediachange(sdio, true);
#endif
#ifdef HAVE_USBHOST
/* Initialize USB host operation. stm32_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
ret = stm32_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef CONFIG_PWM
/* Initialize PWM and register the PWM device. */
ret = stm32_pwm_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_pwm_setup() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_CAN
/* Initialize CAN and register the CAN driver. */
ret = stm32_can_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
}
#endif
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
int ret;
/* Initialize and register the W25 FLASH file system. */
#ifdef HAVE_W25
ret = stm32_w25initialize(CONFIG_NSH_W25MINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to initialize W25 minor %d: %d\n",
CONFIG_NSH_W25MINOR, ret);
return ret;
}
#endif
/* Initialize the SPI-based MMC/SD slot */
#ifdef HAVE_MMCSD
ret = stm32_sdinitialize(CONFIG_NSH_MMCSDMINOR);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to initialize MMC/SD slot %d: %d\n",
STM32_MMCSDSLOTNO, ret);
return ret;
}
#endif
/* Initialize USB host operation. stm32_usbhost_initialize() starts a thread
* will monitor for USB connection and disconnection events.
*/
#ifdef HAVE_USBHOST
ret = stm32_usbhost_initialize();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize USB host: %d\n", ret);
return ret;
}
#endif
#ifdef CONFIG_INPUT_ADS7843E
/* Initialize the touchscreen */
ret = stm32_tsc_setup(0);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_tsc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_CAN
/* Initialize CAN and register the CAN driver. */
ret = stm32_can_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_can_setup failed: %d\n", ret);
}
#endif
UNUSED(ret);
return OK;
}
int board_app_initialize(uintptr_t arg)
{
int ret;
#ifdef CONFIG_FS_PROCFS
/* Mount the procfs file system */
ret = mount(NULL, STM32_PROCFS_MOUNTPOINT, "procfs", 0, NULL);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: Failed to mount procfs at %s: %d\n",
STM32_PROCFS_MOUNTPOINT, ret);
}
#endif
#if !defined(CONFIG_ARCH_LEDS) && defined(CONFIG_USERLED_LOWER)
/* Register the LED driver */
ret = userled_lower_initialize(LED_DRIVER_PATH);
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: userled_lower_initialize() failed: %d\n", ret);
}
#endif
#ifdef CONFIG_ADC
/* Initialize ADC and register the ADC driver. */
ret = stm32_adc_setup();
if (ret < 0)
{
syslog(LOG_ERR, "ERROR: stm32_adc_setup failed: %d\n", ret);
}
#endif
#ifdef CONFIG_STM32F7_BBSRAM
/* Initialize battery-backed RAM */
(void)stm32_bbsram_int();
#endif
#if defined(CONFIG_FAT_DMAMEMORY)
if (stm32_dma_alloc_init() < 0)
{
syslog(LOG_ERR, "DMA alloc FAILED");
}
#endif
#if defined(CONFIG_NUCLEO_SPI_TEST)
/* Create SPI interfaces */
ret = stm32_spidev_bus_test();
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SPI interfaces: %d\n", ret);
return ret;
}
#endif
#if defined(CONFIG_MMCSD)
/* Configure SDIO */
/* Initialize the SDIO block driver */
ret = stm32_sdio_initialize();
if (ret != OK)
{
ferr("ERROR: Failed to initialize MMC/SD driver: %d\n", ret);
return ret;
}
#endif
UNUSED(ret);
return OK;
}
