Exemplos de sys_read_cfg em C++ (Cpp)

Exemplo n.º 1

0

Exibir arquivo

Arquivo: user_main.c Projeto: diannt/esp8266web

/******************************************************************************
 * FunctionName : user_init
 * Description  : entry of user application, init user function here
 * Parameters   : none
 * Returns      : none
 *******************************************************************************/
void ICACHE_FLASH_ATTR user_init(void) {
	sys_read_cfg();
	if(!syscfg.cfg.b.debug_print_enable) system_set_os_print(0);
	uart_init();
#if USE_TMP2NET_PORT
	GPIO0_MUX = 0;
#else
	GPIO0_MUX = VAL_MUX_GPIO0_SDK_DEF;
#endif
	GPIO4_MUX = VAL_MUX_GPIO4_SDK_DEF;
	GPIO5_MUX = VAL_MUX_GPIO5_SDK_DEF;
	GPIO12_MUX = VAL_MUX_GPIO12_SDK_DEF;
	GPIO14_MUX = VAL_MUX_GPIO14_SDK_DEF;
	system_timer_reinit();
#if DEBUGSOO > 0
	os_printf("\nSimple WEB version: " WEB_SVERSION "\nOpenLoaderSDK v1.2\n");
#endif
	if(syscfg.cfg.b.pin_clear_cfg_enable) test_pin_clr_wifi_config();
	set_cpu_clk(); // select cpu frequency 80 or 160 MHz
#if DEBUGSOO > 0
	if(eraminfo.size > 0) os_printf("Found free IRAM: base: %p, size: %d bytes\n", eraminfo.base,  eraminfo.size);
	os_printf("System memory:\n");
    system_print_meminfo();
    os_printf("Start 'heap' size: %d bytes\n", system_get_free_heap_size());
#endif
#if DEBUGSOO > 0
	os_printf("Set CPU CLK: %u MHz\n", ets_get_cpu_frequency());
#endif
	Setup_WiFi();
#if USE_TMP2NET_PORT
	tpm2net_init();
#endif
#ifdef USE_NETBIOS
	if(syscfg.cfg.b.netbios_ena) netbios_init();
#endif
/* #ifdef USE_SNTP
	if(syscfg.cfg.b.sntp_ena) sntp_init();
#endif */
#ifdef UDP_TEST_PORT
	if(syscfg.udp_port) udp_test_port_init(syscfg.udp_port);
#endif
	// инициализация и запуск tcp серверa(ов)
#ifdef USE_SRV_WEB_PORT
    if(syscfg.web_port) webserver_init(syscfg.web_port);
#endif
///    if(syscfg.tcp2uart_port) tcp2uart_init(syscfg.tcp2uart_port);
#ifdef USE_MODBUS
    mdb_tcp_init(502);
#endif
#ifdef USE_WDRV
    init_wdrv();
#endif
	system_deep_sleep_set_option(0);
	system_init_done_cb(init_done_cb);
}

Exemplo n.º 2

0

Exibir arquivo

Arquivo: user_main.c Projeto: VIRGIL-YAN/WirelessCO2_esp8266

/******************************************************************************
 * FunctionName : user_init
 * Description  : entry of user application, init user function here
 * Parameters   : none
 * Returns      : none
 *******************************************************************************/
void ICACHE_FLASH_ATTR user_init(void) {
	sys_read_cfg();
	if(!syscfg.cfg.b.debug_print_enable) system_set_os_print(0);
	GPIO0_MUX = VAL_MUX_GPIO0_SDK_DEF;
	GPIO4_MUX = VAL_MUX_GPIO4_SDK_DEF;
	GPIO5_MUX = VAL_MUX_GPIO5_SDK_DEF;
	GPIO12_MUX = VAL_MUX_GPIO12_SDK_DEF;
	GPIO13_MUX = VAL_MUX_GPIO13_SDK_DEF;
	GPIO14_MUX = VAL_MUX_GPIO14_SDK_DEF;
	GPIO15_MUX = VAL_MUX_GPIO15_SDK_DEF;
	// vad7
	//power_meter_init();
	//
	//uart_init(); // in tcp2uart.h
	system_timer_reinit();
#if (DEBUGSOO > 0 && defined(USE_WEB))
	os_printf("\nSimple WEB version: " WEB_SVERSION "\n");
#endif
	//if(syscfg.cfg.b.pin_clear_cfg_enable) test_pin_clr_wifi_config(); // сброс настроек, если замкнут пин RX
	set_cpu_clk(); // select cpu frequency 80 or 160 MHz
#ifdef USE_GDBSTUB
extern void gdbstub_init(void);
	gdbstub_init();
#endif
#if DEBUGSOO > 0
	if(eraminfo.size > 0) os_printf("Found free IRAM: base: %p, size: %d bytes\n", eraminfo.base,  eraminfo.size);
	os_printf("System memory:\n");
    system_print_meminfo();
    os_printf("bssi  : 0x%x ~ 0x%x, len: %d\n", &_lit4_start, &_lit4_end, (uint32)(&_lit4_end) - (uint32)(&_lit4_start));
    os_printf("free  : 0x%x ~ 0x%x, len: %d\n", (uint32)(&_lit4_end), (uint32)(eraminfo.base) + eraminfo.size, (uint32)(eraminfo.base) + eraminfo.size - (uint32)(&_lit4_end));

    os_printf("Start 'heap' size: %d bytes\n", system_get_free_heap_size());
#endif
#if DEBUGSOO > 0
	os_printf("Set CPU CLK: %u MHz\n", ets_get_cpu_frequency());
#endif
	Setup_WiFi();
    WEBFSInit(); // файловая система

	system_deep_sleep_set_option(0);
	system_init_done_cb(init_done_cb);
}

Exemplo n.º 3

0

Exibir arquivo

Arquivo: user_main.c Projeto: Valdiolus/esp8266web

/******************************************************************************
 * FunctionName : user_init
 * Description  : entry of user application, init user function here
 * Parameters   : none
 * Returns      : none
 *******************************************************************************/
void ICACHE_FLASH_ATTR user_init(void) {
	sys_read_cfg();
	if(!syscfg.cfg.b.debug_print_enable) system_set_os_print(0);
	uart_init();
	GPIO0_MUX = VAL_MUX_GPIO0_SDK_DEF;
	GPIO4_MUX = VAL_MUX_GPIO4_SDK_DEF;
	GPIO5_MUX = VAL_MUX_GPIO5_SDK_DEF;
	GPIO12_MUX = VAL_MUX_GPIO12_SDK_DEF;
	GPIO14_MUX = VAL_MUX_GPIO14_SDK_DEF;
	system_timer_reinit();
#if (DEBUGSOO > 0 && defined(USE_WEB))
	os_printf("\nSimple WEB version: " WEB_SVERSION "\nOpenLoaderSDK v1.2\n");
#endif
	if(syscfg.cfg.b.pin_clear_cfg_enable) test_pin_clr_wifi_config();
	set_cpu_clk(); // select cpu frequency 80 or 160 MHz
#ifdef USE_GDBSTUB
extern void gdbstub_init(void);
	gdbstub_init();
#endif
#if DEBUGSOO > 0
	if(eraminfo.size > 0) os_printf("Found free IRAM: base: %p, size: %d bytes\n", eraminfo.base,  eraminfo.size);
	os_printf("System memory:\n");
    system_print_meminfo();
    os_printf("Start 'heap' size: %d bytes\n", system_get_free_heap_size());
#endif
#if DEBUGSOO > 0
	os_printf("Set CPU CLK: %u MHz\n", ets_get_cpu_frequency());
#endif
	Setup_WiFi();
#ifdef USE_WDRV
    init_wdrv();
#endif
	Set_WiFi(&wificonfig, Cmp_WiFi_chg(&wificonfig) & (WIFI_MASK_SLEEP|WIFI_MASK_STDHCP|WIFI_MASK_APIPDHCP));
	WEBFSInit(); // файловая система
	system_deep_sleep_set_option(0);
	system_init_done_cb(init_done_cb);
}