Exemplo n.º 1
0
static int fax_set_common(struct cw_channel *chan, t30_state_t *t30, const char *file, int calling_party, int verbose)
{
    char *x;

    x = pbx_builtin_getvar_helper(chan, "LOCALSTATIONID");
    if (x  &&  x[0])
        t30_set_tx_ident(t30, x);
    x = pbx_builtin_getvar_helper(chan, "LOCALSUBADDRESS");
    if (x  &&  x[0])
        t30_set_tx_sub_address(t30, x);
    x = pbx_builtin_getvar_helper(chan, "LOCALHEADERINFO");
    if (x  &&  x[0])
        t30_set_tx_page_header_info(t30, x);
    t30_set_rx_file(t30, file, -1);

    x = pbx_builtin_getvar_helper(chan, "FAX_DISABLE_V17");
    if (x  &&  x[0])
        t30_set_supported_modems(t30, T30_SUPPORT_V29 | T30_SUPPORT_V27TER);

    x = pbx_builtin_getvar_helper(chan, "FAX_DISABLE_ECM");
    if (x  &&  x[0])
    {
        t30_set_supported_compressions(t30,
                                       T30_SUPPORT_T4_1D_COMPRESSION
                                     | T30_SUPPORT_T4_2D_COMPRESSION);
        cw_log(LOG_DEBUG, "Disabling ECM mode\n");
    }
    else 
    {
        t30_set_ecm_capability(t30, TRUE);
        t30_set_supported_compressions(t30,
                                       T30_SUPPORT_T4_1D_COMPRESSION
                                     | T30_SUPPORT_T4_2D_COMPRESSION
                                     | T30_SUPPORT_T6_COMPRESSION);
    }

    t30_set_supported_image_sizes(t30,
                                  T30_SUPPORT_US_LETTER_LENGTH
                                | T30_SUPPORT_US_LEGAL_LENGTH
                                | T30_SUPPORT_UNLIMITED_LENGTH
                                | T30_SUPPORT_215MM_WIDTH
                                | T30_SUPPORT_255MM_WIDTH
                                | T30_SUPPORT_303MM_WIDTH);
    t30_set_supported_resolutions(t30,
                                  T30_SUPPORT_STANDARD_RESOLUTION
                                | T30_SUPPORT_FINE_RESOLUTION
                                | T30_SUPPORT_SUPERFINE_RESOLUTION
                                | T30_SUPPORT_R8_RESOLUTION
                                | T30_SUPPORT_R16_RESOLUTION);

    //t30_set_phase_b_handler(t30, phase_b_handler, chan);
    t30_set_phase_d_handler(t30, phase_d_handler, chan);
    t30_set_phase_e_handler(t30, phase_e_handler, chan);

    return 0;
}
Exemplo n.º 2
0
static void set_ecm(t30_state_t *state, int ecm)
{
	t30_set_ecm_capability(state, ecm);
	t30_set_supported_compressions(state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
}
Exemplo n.º 3
0
int main(int argc, char *argv[])
{
    int msg_len;
    uint8_t msg[1024];
    int t38_version;
    int i;
    int seq_no;
    int use_ecm;
    int without_pacing;
    const char *input_file_name;
    
    t38_version = 1;
    without_pacing = FALSE;
    input_file_name = INPUT_FILE_NAME;
    use_ecm = FALSE;
    simulate_incrementing_repeats = FALSE;
    for (i = 1;  i < argc;  i++)
    {
        if (strcmp(argv[i], "-e") == 0)
        {
            use_ecm = TRUE;
            continue;
        }
        if (strcmp(argv[i], "-i") == 0)
        {
            i++;
            input_file_name = argv[i];
            continue;
        }
        if (strcmp(argv[i], "-I") == 0)
        {
            simulate_incrementing_repeats = TRUE;
            continue;
        }
        if (strcmp(argv[i], "-p") == 0)
        {
            without_pacing = TRUE;
            continue;
        }
        if (strcmp(argv[i], "-v") == 0)
        {
            i++;
            t38_version = atoi(argv[i]);
            continue;
        }
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    if ((path_a_to_b = ip_network_model_init(800, 2000, 0)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = ip_network_model_init(800, 2000, 0)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    if (t38_terminal_init(&t38_state_a, TRUE, tx_packet_handler_a, &t38_state_b) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_set_t38_version(&t38_state_a.t38, t38_version);
    t38_terminal_set_config(&t38_state_a, without_pacing);
    span_log_set_level(&t38_state_a.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.logging, "T.38-A");
    span_log_set_level(&t38_state_a.t38.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.t38.logging, "T.38-A");
    span_log_set_level(&t38_state_a.t30_state.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.t30_state.logging, "T.38-A");

    t30_set_local_ident(&t38_state_a.t30_state, "11111111");
    t30_set_tx_file(&t38_state_a.t30_state, input_file_name, -1, -1);
    t30_set_phase_b_handler(&t38_state_a.t30_state, phase_b_handler, (void *) (intptr_t) 'A');
    t30_set_phase_d_handler(&t38_state_a.t30_state, phase_d_handler, (void *) (intptr_t) 'A');
    t30_set_phase_e_handler(&t38_state_a.t30_state, phase_e_handler, (void *) (intptr_t) 'A');
    t30_set_ecm_capability(&t38_state_a.t30_state, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(&t38_state_a.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    if (t38_terminal_init(&t38_state_b, FALSE, tx_packet_handler_b, &t38_state_a) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_set_t38_version(&t38_state_b.t38, t38_version);
    t38_terminal_set_config(&t38_state_b, without_pacing);
    span_log_set_level(&t38_state_b.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.logging, "T.38-B");
    span_log_set_level(&t38_state_b.t38.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.t38.logging, "T.38-B");
    span_log_set_level(&t38_state_b.t30_state.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.t30_state.logging, "T.38-B");

    t30_set_local_ident(&t38_state_b.t30_state, "22222222");
    t30_set_rx_file(&t38_state_b.t30_state, OUTPUT_FILE_NAME, -1);
    t30_set_phase_b_handler(&t38_state_b.t30_state, phase_b_handler, (void *) (intptr_t) 'B');
    t30_set_phase_d_handler(&t38_state_b.t30_state, phase_d_handler, (void *) (intptr_t) 'B');
    t30_set_phase_e_handler(&t38_state_b.t30_state, phase_e_handler, (void *) (intptr_t) 'B');
    t30_set_ecm_capability(&t38_state_b.t30_state, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(&t38_state_b.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    for (;;)
    {
        span_log_bump_samples(&t38_state_a.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_a.t38.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_a.t30_state.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.t38.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.t30_state.logging, SAMPLES_PER_CHUNK);

        done[0] = t38_terminal_send_timeout(&t38_state_a, SAMPLES_PER_CHUNK);
        done[1] = t38_terminal_send_timeout(&t38_state_b, SAMPLES_PER_CHUNK);

        while ((msg_len = ip_network_model_get(path_a_to_b, SAMPLES_PER_CHUNK, msg, 1024, &seq_no)) >= 0)
        {
            t38_core_rx_ifp_packet(&t38_state_b.t38, seq_no, msg, msg_len);
        }
        while ((msg_len = ip_network_model_get(path_b_to_a, SAMPLES_PER_CHUNK, msg, 1024, &seq_no)) >= 0)
        {
            t38_core_rx_ifp_packet(&t38_state_a.t38, seq_no, msg, msg_len);
        }
        if (done[0]  &&  done[1])
            break;
    }
    if (!succeeded[0]  ||  !succeeded[1])
    {
        printf("Tests failed\n");
        exit(2);
    }
    printf("Tests passed\n");
    return  0;
}
Exemplo n.º 4
0
int main(int argc, char *argv[])
{
    int16_t silence[SAMPLES_PER_CHUNK];
    int16_t t30_amp_a[SAMPLES_PER_CHUNK];
    int16_t t38_amp_a[SAMPLES_PER_CHUNK];
    int16_t t38_amp_b[SAMPLES_PER_CHUNK];
    int16_t t30_amp_b[SAMPLES_PER_CHUNK];
    int16_t out_amp[SAMPLES_PER_CHUNK*4];
    int t30_len_a;
    int t38_len_a;
    int t38_len_b;
    int t30_len_b;
    int log_audio;
    int msg_len;
    uint8_t msg[1024];
    int outframes;
    AFfilesetup filesetup;
    AFfilehandle wave_handle;
    int use_ecm;
    int use_tep;
    int use_transmit_on_idle;
    int t38_version;
    const char *input_file_name;
    int i;
    int seq_no;
    int model_no;
    int speed_pattern_no;
    double tx_when;
    double rx_when;
    int use_gui;
    int opt;

    log_audio = FALSE;
    use_ecm = FALSE;
    t38_version = 1;
    input_file_name = INPUT_FILE_NAME;
    simulate_incrementing_repeats = FALSE;
    model_no = 0;
    speed_pattern_no = 1;
    use_gui = FALSE;
    use_tep = FALSE;
    use_transmit_on_idle = TRUE;
    while ((opt = getopt(argc, argv, "egi:Ilm:s:tv:")) != -1)
    {
        switch (opt)
        {
        case 'e':
            use_ecm = TRUE;
            break;
        case 'g':
            use_gui = TRUE;
            break;
        case 'i':
            input_file_name = optarg;
            break;
        case 'I':
            simulate_incrementing_repeats = TRUE;
            break;
        case 'l':
            log_audio = TRUE;
            break;
        case 'm':
            model_no = optarg[0] - 'A' + 1;
            break;
        case 's':
            speed_pattern_no = atoi(optarg);
            break;
        case 't':
            use_tep = TRUE;
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        }
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    filesetup = AF_NULL_FILESETUP;
    wave_handle = AF_NULL_FILEHANDLE;
    if (log_audio)
    {
        if ((filesetup = afNewFileSetup()) == AF_NULL_FILESETUP)
        {
            fprintf(stderr, "    Failed to create file setup\n");
            exit(2);
        }
        afInitSampleFormat(filesetup, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 16);
        afInitRate(filesetup, AF_DEFAULT_TRACK, (float) SAMPLE_RATE);
        afInitFileFormat(filesetup, AF_FILE_WAVE);
        afInitChannels(filesetup, AF_DEFAULT_TRACK, 4);
        if ((wave_handle = afOpenFile(OUTPUT_FILE_NAME_WAVE, "w", filesetup)) == AF_NULL_FILEHANDLE)
        {
            fprintf(stderr, "    Cannot create wave file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
    }
    memset(silence, 0, sizeof(silence));
 
    srand48(0x1234567);
    if ((path_a_to_b = g1050_init(model_no, speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = g1050_init(model_no, speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    if (fax_init(&fax_state_a, TRUE) == NULL)
    {
        fprintf(stderr, "Cannot start FAX\n");
        exit(2);
    }
    fax_set_transmit_on_idle(&fax_state_a, use_transmit_on_idle);
    fax_set_tep_mode(&fax_state_a, use_tep);
    //t30_set_supported_modems(&(fax_state_a.t30_state), T30_SUPPORT_V27TER | T30_SUPPORT_V29);
    t30_set_local_ident(&fax_state_a.t30_state, "11111111");
    t30_set_tx_file(&fax_state_a.t30_state, input_file_name, -1, -1);
    t30_set_phase_b_handler(&fax_state_a.t30_state, phase_b_handler, (void *) (intptr_t) 'A');
    t30_set_phase_d_handler(&fax_state_a.t30_state, phase_d_handler, (void *) (intptr_t) 'A');
    t30_set_phase_e_handler(&fax_state_a.t30_state, phase_e_handler, (void *) (intptr_t) 'A');
    t30_set_local_nsf(&fax_state_a.t30_state, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_ecm_capability(&fax_state_a.t30_state, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(&fax_state_a.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
    span_log_set_level(&fax_state_a.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&fax_state_a.logging, "FAX-A ");
    span_log_set_level(&fax_state_a.t30_state.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&fax_state_a.t30_state.logging, "FAX-A ");
    memset(t30_amp_a, 0, sizeof(t30_amp_a));

    if (t38_gateway_init(&t38_state_a, tx_packet_handler_a, &t38_state_b) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_gateway_set_transmit_on_idle(&t38_state_a, use_transmit_on_idle);
    //t38_gateway_set_supported_modems(&t38_state_a, T30_SUPPORT_V27TER | T30_SUPPORT_V29);
    //t38_gateway_set_nsx_suppression(&t38_state_a, FALSE);
    t38_set_t38_version(&t38_state_a.t38, t38_version);
    t38_gateway_set_ecm_capability(&t38_state_a, use_ecm);
    span_log_set_level(&t38_state_a.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.logging, "T.38-A");
    span_log_set_level(&t38_state_a.t38.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.t38.logging, "T.38-A");
    memset(t38_amp_a, 0, sizeof(t38_amp_a));

    if (t38_gateway_init(&t38_state_b, tx_packet_handler_b, &t38_state_a) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_gateway_set_transmit_on_idle(&t38_state_b, use_transmit_on_idle);
    //t38_gateway_set_supported_modems(&t38_state_b, T30_SUPPORT_V27TER | T30_SUPPORT_V29);
    //t38_gateway_set_nsx_suppression(&t38_state_b, FALSE);
    t38_set_t38_version(&t38_state_b.t38, t38_version);
    t38_gateway_set_ecm_capability(&t38_state_b, use_ecm);
    span_log_set_level(&t38_state_b.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.logging, "T.38-B");
    span_log_set_level(&t38_state_b.t38.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.t38.logging, "T.38-B");
    memset(t38_amp_b, 0, sizeof(t38_amp_b));

    if (fax_init(&fax_state_b, FALSE) == NULL)
    {
        fprintf(stderr, "Cannot start FAX\n");
        exit(2);
    }
    fax_set_transmit_on_idle(&fax_state_b, use_transmit_on_idle);
    fax_set_tep_mode(&fax_state_b, use_tep);
    t30_set_local_ident(&fax_state_b.t30_state, "22222222");
    t30_set_rx_file(&fax_state_b.t30_state, OUTPUT_FILE_NAME, -1);
    t30_set_phase_b_handler(&fax_state_b.t30_state, phase_b_handler, (void *) (intptr_t) 'B');
    t30_set_phase_d_handler(&fax_state_b.t30_state, phase_d_handler, (void *) (intptr_t) 'B');
    t30_set_phase_e_handler(&fax_state_b.t30_state, phase_e_handler, (void *) (intptr_t) 'B');
    t30_set_local_nsf(&fax_state_b.t30_state, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_ecm_capability(&fax_state_b.t30_state, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(&fax_state_b.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
    span_log_set_level(&fax_state_b.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&fax_state_b.logging, "FAX-B ");
    span_log_set_level(&fax_state_b.t30_state.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&fax_state_b.t30_state.logging, "FAX-B ");
    memset(t30_amp_b, 0, sizeof(t30_amp_b));

#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    for (;;)
    {
        span_log_bump_samples(&fax_state_a.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&fax_state_a.t30_state.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_a.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_a.t38.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.t38.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&fax_state_b.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&fax_state_b.t30_state.logging, SAMPLES_PER_CHUNK);
        memset(out_amp, 0, sizeof(out_amp));

        t30_len_a = fax_tx(&fax_state_a, t30_amp_a, SAMPLES_PER_CHUNK);
        if (!use_transmit_on_idle)
        {
            /* The receive side always expects a full block of samples, but the
               transmit side may not be sending any when it doesn't need to. We
               may need to pad with some silence. */
            if (t30_len_a < SAMPLES_PER_CHUNK)
            {
                memset(t30_amp_a + t30_len_a, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len_a));
                t30_len_a = SAMPLES_PER_CHUNK;
            }
        }
        if (log_audio)
        {
            for (i = 0;  i < t30_len_a;  i++)
                out_amp[i*4] = t30_amp_a[i];
        }
        if (t38_gateway_rx(&t38_state_a, t30_amp_a, t30_len_a))
            break;

        t38_len_a = t38_gateway_tx(&t38_state_a, t38_amp_a, SAMPLES_PER_CHUNK);
        if (!use_transmit_on_idle)
        {
            if (t38_len_a < SAMPLES_PER_CHUNK)
            {
                memset(t38_amp_a + t38_len_a, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t38_len_a));
                t38_len_a = SAMPLES_PER_CHUNK;
            }
        }
        if (log_audio)
        {
            for (i = 0;  i < t38_len_a;  i++)
                out_amp[i*4 + 1] = t38_amp_a[i];
        }
        if (fax_rx(&fax_state_a, t38_amp_a, SAMPLES_PER_CHUNK))
            break;

        t30_len_b = fax_tx(&fax_state_b, t30_amp_b, SAMPLES_PER_CHUNK);
        if (!use_transmit_on_idle)
        {
            /* The receive side always expects a full block of samples, but the
               transmit side may not be sending any when it doesn't need to. We
               may need to pad with some silence. */
            if (t30_len_b < SAMPLES_PER_CHUNK)
            {
                memset(t30_amp_b + t30_len_b, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len_b));
                t30_len_b = SAMPLES_PER_CHUNK;
            }
        }
        if (log_audio)
        {
            for (i = 0;  i < t30_len_b;  i++)
                out_amp[i*4 + 3] = t30_amp_b[i];
        }
        if (t38_gateway_rx(&t38_state_b, t30_amp_b, t30_len_b))
            break;

        t38_len_b = t38_gateway_tx(&t38_state_b, t38_amp_b, SAMPLES_PER_CHUNK);
        if (!use_transmit_on_idle)
        {
            if (t38_len_b < SAMPLES_PER_CHUNK)
            {
                memset(t38_amp_b + t38_len_b, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t38_len_b));
                t38_len_b = SAMPLES_PER_CHUNK;
            }
        }
        if (log_audio)
        {
            for (i = 0;  i < t38_len_b;  i++)
                out_amp[i*4 + 2] = t38_amp_b[i];
        }
        if (fax_rx(&fax_state_b, t38_amp_b, SAMPLES_PER_CHUNK))
            break;

        when += 0.02;

        while ((msg_len = g1050_get(path_a_to_b, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core_rx_ifp_packet(&t38_state_b.t38, msg, msg_len, seq_no);
        }
        while ((msg_len = g1050_get(path_b_to_a, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core_rx_ifp_packet(&t38_state_a.t38, msg, msg_len, seq_no);
        }
        if (log_audio)
        {
            outframes = afWriteFrames(wave_handle, AF_DEFAULT_TRACK, out_amp, SAMPLES_PER_CHUNK);
            if (outframes != SAMPLES_PER_CHUNK)
                break;
        }

        if (done[0]  &&  done[1])
            break;
#if defined(ENABLE_GUI)
        if (use_gui)
            media_monitor_update_display();
#endif
    }
    if (log_audio)
    {
        if (afCloseFile(wave_handle) != 0)
        {
            fprintf(stderr, "    Cannot close wave file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
        afFreeFileSetup(filesetup);
    }
    if (!succeeded[0]  ||  !succeeded[1])
    {
        printf("Tests failed\n");
        exit(2);
    }
    printf("Tests passed\n");
    return  0;
}
Exemplo n.º 5
0
int main(int argc, char *argv[])
{
    int16_t silence[SAMPLES_PER_CHUNK];
    int16_t t30_amp[2][SAMPLES_PER_CHUNK];
    int16_t t38_amp[2][SAMPLES_PER_CHUNK];
    int16_t t38_amp_hist_a[8][SAMPLES_PER_CHUNK];
    int16_t t38_amp_hist_b[8][SAMPLES_PER_CHUNK];
    int16_t out_amp[SAMPLES_PER_CHUNK*4];
    int16_t *fax_rx_buf[2];
    int16_t *fax_tx_buf[2];
    int16_t *t38_gateway_rx_buf[2];
    int16_t *t38_gateway_tx_buf[2];
    int t30_len[2];
    int t38_len[2];
    int hist_ptr;
    int log_audio;
    int msg_len;
    uint8_t msg[1024];
    int outframes;
    SNDFILE *wave_handle;
    SNDFILE *input_wave_handle;
    int use_ecm;
    int use_tep;
    int feedback_audio;
    int use_transmit_on_idle;
    int t38_version;
    const char *input_tiff_file_name;
    const char *decode_file_name;
    int i;
    int j;
    int seq_no;
    int g1050_model_no;
    int g1050_speed_pattern_no;
    int t38_transport;
    double tx_when;
    double rx_when;
    int supported_modems;
    int remove_fill_bits;
    int opt;
    int start_page;
    int end_page;
    int drop_frame;
    int drop_frame_rate;
    float signal_scaling;
    int signal_level;
    int noise_level;
    int code_to_look_up;
    int scan_line_time;
    t38_stats_t t38_stats;
    t30_stats_t t30_stats;
    logging_state_t *logging;
    int expected_pages;
    char *page_header_info;
    char *page_header_tz;
    const char *tag;
    char buf[132 + 1];
#if defined(ENABLE_GUI)
    int use_gui;
#endif

#if defined(ENABLE_GUI)
    use_gui = FALSE;
#endif
    log_audio = FALSE;
    use_ecm = FALSE;
    t38_version = 1;
    input_tiff_file_name = INPUT_TIFF_FILE_NAME;
    t38_simulate_incrementing_repeats = FALSE;
    g1050_model_no = 0;
    g1050_speed_pattern_no = 1;
    remove_fill_bits = FALSE;
    use_tep = FALSE;
    feedback_audio = FALSE;
    use_transmit_on_idle = TRUE;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    page_header_info = NULL;
    page_header_tz = NULL;
    drop_frame = 0;
    drop_frame_rate = 0;
    start_page = -1;
    end_page = -1;
    signal_level = 0;
    noise_level = -99;
    scan_line_time = 0;
    decode_file_name = NULL;
    code_to_look_up = -1;
    t38_transport = T38_TRANSPORT_UDPTL;
    while ((opt = getopt(argc, argv, "c:d:D:efFgH:i:Ilm:M:n:p:s:tT:u:v:z:")) != -1)
    {
        switch (opt)
        {
        case 'c':
            code_to_look_up = atoi(optarg);
            break;
        case 'd':
            decode_file_name = optarg;
            break;
        case 'D':
            drop_frame_rate =
            drop_frame = atoi(optarg);
            break;
        case 'e':
            use_ecm = TRUE;
            break;
        case 'f':
            feedback_audio = TRUE;
            break;
        case 'F':
            remove_fill_bits = TRUE;
            break;
        case 'g':
#if defined(ENABLE_GUI)
            use_gui = TRUE;
#else
            fprintf(stderr, "Graphical monitoring not available\n");
            exit(2);
#endif
            break;
        case 'H':
            page_header_info = optarg;
            break;
        case 'i':
            input_tiff_file_name = optarg;
            break;
        case 'I':
            t38_simulate_incrementing_repeats = TRUE;
            break;
        case 'l':
            log_audio = TRUE;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'M':
            g1050_model_no = optarg[0] - 'A' + 1;
            break;
        case 'n':
            noise_level = atoi(optarg);
            break;
        case 'p':
            for (i = 0;  i < 2;  i++)
            {
                switch (optarg[i])
                {
                case 'A':
                    mode[i] = AUDIO_FAX;
                    break;
                case 'G':
                    mode[i] = T38_GATEWAY_FAX;
                    break;
                case 'T':
                    mode[i] = T38_TERMINAL_FAX;
                    break;
                default:
                    fprintf(stderr, "Unknown FAX path element %c\n", optarg[i]);
                    exit(2);
                }
            }
            if ((mode[0] == AUDIO_FAX  &&  mode[1] != AUDIO_FAX)
                ||
                (mode[0] != AUDIO_FAX  &&  mode[1] == AUDIO_FAX))
            {
                fprintf(stderr, "Invalid FAX path %s\n", optarg);
                exit(2);
            }
            break;
        case 's':
            g1050_speed_pattern_no = atoi(optarg);
            break;
#if 0
        case 's':
            signal_level = atoi(optarg);
            break;
#endif
        case 'S':
            scan_line_time = atoi(optarg);
            break;
        case 't':
            use_tep = TRUE;
            break;
        case 'T':
            start_page = 0;
            end_page = atoi(optarg);
            break;
        case 'u':
            if (strcasecmp(optarg, "udptl") == 0)
                t38_transport = T38_TRANSPORT_UDPTL;
            else if (strcasecmp(optarg, "rtp") == 0)
                t38_transport = T38_TRANSPORT_RTP;
            else if (strcasecmp(optarg, "tcp") == 0)
                t38_transport = T38_TRANSPORT_TCP;
            else if (strcasecmp(optarg, "tcp-tpkt") == 0)
                t38_transport = T38_TRANSPORT_TCP_TPKT;
            else
            {
                fprintf(stderr, "Unknown T.38 transport mode\n");
                exit(2);
            }
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        case 'z':
            page_header_tz = optarg;
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    if (code_to_look_up >= 0)
    {
        printf("Result code %d is %s\n", code_to_look_up, t30_completion_code_to_str(code_to_look_up));
        exit(0);
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    wave_handle = NULL;
    if (log_audio)
    {
        if ((wave_handle = sf_open_telephony_write(OUTPUT_WAVE_FILE_NAME, 4)) == NULL)
        {
            fprintf(stderr, "    Cannot create audio file '%s'\n", OUTPUT_WAVE_FILE_NAME);
            exit(2);
        }
    }
    memset(silence, 0, sizeof(silence));
 
    srand48(0x1234567);
    /* Set up the nodes */
    input_wave_handle = NULL;
    if (mode[0] == T38_TERMINAL_FAX)
    {
    }
    else
    {
        if (decode_file_name)
        {
            if ((input_wave_handle = sf_open_telephony_read(decode_file_name, 1)) == NULL)
            {
                fprintf(stderr, "    Cannot open audio file '%s'\n", decode_file_name);
                exit(2);
            }
        }
    }

    for (i = 0;  i < 2;  i++)
    {
        tag = (i == 0)  ?  "A"  :  "B";

        memset(&expected_rx_info[i], 0, sizeof(expected_rx_info[i]));
        if (mode[i] == T38_TERMINAL_FAX)
        {
            if ((t38_state[i] = t38_terminal_init(NULL, (i == 0), tx_packet_handler, (void *) (intptr_t) i)) == NULL)
            {
                fprintf(stderr, "Cannot start the T.38 terminal instance\n");
                exit(2);
            }
            t30_state[i] = t38_terminal_get_t30_state(t38_state[i]);
            t38_core_state[i] = t38_terminal_get_t38_core_state(t38_state[i]);

            logging = t38_terminal_get_logging_state(t38_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = t38_core_get_logging_state(t38_core_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = t30_get_logging_state(t30_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);
        }
        else
        {
            if ((fax_state[i] = fax_init(NULL, (i == 0))) == NULL)
            {
                fprintf(stderr, "Cannot start FAX instance\n");
                exit(2);
            }
            t30_state[i] = fax_get_t30_state(fax_state[i]);

            logging = fax_get_logging_state(fax_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = fax_modems_get_logging_state(&fax_state[i]->modems);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            logging = t30_get_logging_state(t30_state[i]);
            span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
            span_log_set_tag(logging, tag);

            if (mode[i] == T38_GATEWAY_FAX)
            {
                if ((t38_gateway_state[i] = t38_gateway_init(NULL, tx_packet_handler, (void *) (intptr_t) i)) == NULL)
                {
                    fprintf(stderr, "Cannot start the T.38 gateway instancel\n");
                    exit(2);
                }
                t38_core_state[i] = t38_gateway_get_t38_core_state(t38_gateway_state[i]);

                logging = t38_gateway_get_logging_state(t38_gateway_state[i]);
                span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
                span_log_set_tag(logging, tag);

                logging = fax_modems_get_logging_state(&t38_gateway_state[i]->audio.modems);
                span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
                span_log_set_tag(logging, tag);

                logging = t38_core_get_logging_state(t38_core_state[i]);
                span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
                span_log_set_tag(logging, tag);

                fax_rx_buf[i] = t38_amp[i];
                fax_tx_buf[i] = t30_amp[i];
                t38_gateway_rx_buf[i] = t30_amp[i];
                t38_gateway_tx_buf[i] = t38_amp[i];
            }
            else
            {
                fax_rx_buf[i] = t30_amp[i];
                fax_tx_buf[i] = t30_amp[i ^ 1];
                t38_gateway_rx_buf[i] = NULL;
                t38_gateway_tx_buf[i] = NULL;
            }
            awgn_state[i] = NULL;
            signal_scaling = 1.0f;
            if (noise_level > -99)
            {
                awgn_state[i] = awgn_init_dbm0(NULL, 1234567, noise_level);
                signal_scaling = powf(10.0f, signal_level/20.0f);
                printf("Signal scaling %f\n", signal_scaling);
            }
        }
        set_t30_callbacks(t30_state[i], i);
    }
    /* Set up the channels */
    for (i = 0;  i < 2;  i++)
    {
        if ((g1050_path[i] = g1050_init(g1050_model_no, g1050_speed_pattern_no, 100, 33)) == NULL)
        {
            fprintf(stderr, "Failed to start IP network path model\n");
            exit(2);
        }
        memset(audio_buffer[2*i], 0, SAMPLES_PER_CHUNK*sizeof(int16_t));
        memset(audio_buffer[2*i + 1], 0, SAMPLES_PER_CHUNK*sizeof(int16_t));
        memset(t30_amp[i], 0, sizeof(t30_amp[i]));
        memset(t38_amp[i], 0, sizeof(t38_amp[i]));
    }
    memset(t38_amp_hist_a, 0, sizeof(t38_amp_hist_a));
    memset(t38_amp_hist_b, 0, sizeof(t38_amp_hist_b));

    for (i = 0;  i < 2;  i++)
    {
        j = i + 1;
        sprintf(buf, "%d%d%d%d%d%d%d%d", j, j, j, j, j, j, j, j);
        t30_set_tx_ident(t30_state[i], buf);
        strcpy(expected_rx_info[i ^ 1].ident, buf);
        sprintf(buf, "Sub-address %d", j);
        t30_set_tx_sub_address(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].sub_address, buf);
        sprintf(buf, "Sender ID %d", j);
        t30_set_tx_sender_ident(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].sender_ident, buf);
        sprintf(buf, "Password %d", j);
        t30_set_tx_password(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].password, buf);
        sprintf(buf, "Polled sub-add %d", j);
        t30_set_tx_polled_sub_address(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].polled_sub_address, buf);
        sprintf(buf, "Select poll add %d", j);
        t30_set_tx_selective_polling_address(t30_state[i], buf);
        //strcpy(expected_rx_info[i ^ 1].selective_polling_address, buf);
        t30_set_tx_page_header_info(t30_state[i], page_header_info);
        if (page_header_tz)
            t30_set_tx_page_header_tz(t30_state[i], page_header_tz);

        if ((i & 1) == 1)
        {
            t30_set_tx_nsf(t30_state[i], (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
            expected_rx_info[i ^ 1].nsf = (uint8_t *) "\x50\x00\x00\x00Spandsp\x00";
            expected_rx_info[i ^ 1].nsf_len = 12;
        }

        t30_set_supported_modems(t30_state[i], supported_modems);
        t30_set_supported_t30_features(t30_state[i],
                                       T30_SUPPORT_IDENTIFICATION
                                     | T30_SUPPORT_SELECTIVE_POLLING
                                     | T30_SUPPORT_SUB_ADDRESSING);
        t30_set_supported_image_sizes(t30_state[i],
                                      T30_SUPPORT_US_LETTER_LENGTH
                                    | T30_SUPPORT_US_LEGAL_LENGTH
                                    | T30_SUPPORT_UNLIMITED_LENGTH
                                    | T30_SUPPORT_215MM_WIDTH
                                    | T30_SUPPORT_255MM_WIDTH
                                    | T30_SUPPORT_303MM_WIDTH);
        t30_set_supported_resolutions(t30_state[i],
                                      T30_SUPPORT_STANDARD_RESOLUTION
                                    | T30_SUPPORT_FINE_RESOLUTION
                                    | T30_SUPPORT_SUPERFINE_RESOLUTION
                                    | T30_SUPPORT_R8_RESOLUTION
                                    | T30_SUPPORT_R16_RESOLUTION
                                    | T30_SUPPORT_300_300_RESOLUTION
                                    | T30_SUPPORT_400_400_RESOLUTION
                                    | T30_SUPPORT_600_600_RESOLUTION
                                    | T30_SUPPORT_1200_1200_RESOLUTION
                                    | T30_SUPPORT_300_600_RESOLUTION
                                    | T30_SUPPORT_400_800_RESOLUTION
                                    | T30_SUPPORT_600_1200_RESOLUTION);
        t30_set_ecm_capability(t30_state[i], use_ecm);
        if (use_ecm)
        {
            t30_set_supported_compressions(t30_state[i],
                                           T30_SUPPORT_T4_1D_COMPRESSION
                                         | T30_SUPPORT_T4_2D_COMPRESSION
                                         | T30_SUPPORT_T6_COMPRESSION
                                         | T30_SUPPORT_T81_COMPRESSION
                                         | T30_SUPPORT_T85_COMPRESSION
                                         | T30_SUPPORT_T85_L0_COMPRESSION);
        }
        else
        {
            t30_set_supported_compressions(t30_state[i],
                                           T30_SUPPORT_T4_1D_COMPRESSION
                                         | T30_SUPPORT_T4_2D_COMPRESSION);
        }
        t30_set_minimum_scan_line_time(t30_state[i], scan_line_time);

        if (mode[i] == T38_GATEWAY_FAX)
        {
            t38_gateway_set_transmit_on_idle(t38_gateway_state[i], use_transmit_on_idle);
            t38_gateway_set_supported_modems(t38_gateway_state[i], supported_modems);
            //t38_gateway_set_nsx_suppression(t38_state[i], NULL, 0, NULL, 0);
            t38_gateway_set_fill_bit_removal(t38_gateway_state[i], remove_fill_bits);
            t38_gateway_set_real_time_frame_handler(t38_gateway_state[i], real_time_gateway_frame_handler, (void *) (intptr_t) i);
            t38_gateway_set_ecm_capability(t38_gateway_state[i], use_ecm);
        }
        if (mode[i] != AUDIO_FAX)
        {
            t38_set_t38_version(t38_core_state[i], t38_version);
        }

        if (mode[i] == T38_TERMINAL_FAX)
        {
            //t30_set_iaf_mode(t30_state[i], T30_IAF_MODE_NO_FILL_BITS);
            switch (t38_transport)
            {
            case T38_TRANSPORT_UDPTL:
            case T38_TRANSPORT_RTP:
                t38_terminal_set_fill_bit_removal(t38_state[i], remove_fill_bits);
                t38_terminal_set_tep_mode(t38_state[i], use_tep);
                break;
            case T38_TRANSPORT_TCP:
            case T38_TRANSPORT_TCP_TPKT:
                t38_terminal_set_fill_bit_removal(t38_state[i], TRUE);
                t38_terminal_set_config(t38_state[i], T38_TERMINAL_OPTION_NO_PACING | T38_TERMINAL_OPTION_NO_INDICATORS);
                t38_terminal_set_tep_mode(t38_state[i], FALSE);
                break;
            }
        }
        else
        {
            fax_set_transmit_on_idle(fax_state[i], use_transmit_on_idle);
            fax_set_tep_mode(fax_state[i], use_tep);
        }
    }

    t30_set_tx_file(t30_state[0], input_tiff_file_name, start_page, end_page);
    t30_set_rx_file(t30_state[1], OUTPUT_TIFF_FILE_NAME, -1);

#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    hist_ptr = 0;
    for (;;)
    {
        memset(out_amp, 0, sizeof(out_amp));

        for (i = 0;  i < 2;  i++)
        {
            /* Update T.30 timing */
            logging = t30_get_logging_state(t30_state[i]);
            span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

            if (mode[i] == T38_TERMINAL_FAX)
            {
                /* Update T.38 termination timing */
                logging = t38_terminal_get_logging_state(t38_state[i]);
                span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
                logging = t38_core_get_logging_state(t38_core_state[i]);
                span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

                completed[i] = t38_terminal_send_timeout(t38_state[i], SAMPLES_PER_CHUNK);
            }
            else
            {
                /* Update audio FAX timing */
                logging = fax_get_logging_state(fax_state[i]);
                span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

                fax_rx(fax_state[i], fax_rx_buf[i], SAMPLES_PER_CHUNK);
                if (!t30_call_active(t30_state[i]))
                {
                    completed[i] = TRUE;
                    continue;
                }

                if (i == 0  &&  input_wave_handle)
                {
                    t30_len[i] = sf_readf_short(input_wave_handle, fax_tx_buf[i], SAMPLES_PER_CHUNK);
                    if (t30_len[i] == 0)
                        break;
                }
                else
                {
                    t30_len[i] = fax_tx(fax_state[i], fax_tx_buf[i], SAMPLES_PER_CHUNK);
                    if (!use_transmit_on_idle)
                    {
                        /* The receive side always expects a full block of samples, but the
                           transmit side may not be sending any when it doesn't need to. We
                           may need to pad with some silence. */
                        if (t30_len[i] < SAMPLES_PER_CHUNK)
                        {
                            memset(t30_amp[i] + t30_len[i], 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len[i]));
                            t30_len[i] = SAMPLES_PER_CHUNK;
                        }
                    }
                    if (awgn_state[i])
                    {
                        for (j = 0;  j < t30_len[i];  j++)
                            fax_tx_buf[i][j] = ((int16_t) (fax_tx_buf[i][j]*signal_scaling)) + awgn(awgn_state[i]);
                    }
                }
                if (log_audio)
                {
                    for (j = 0;  j < t30_len[i];  j++)
                        out_amp[4*j + 2*i] = t30_amp[i][j];
                }
                if (feedback_audio)
                {
                    for (j = 0;  j < t30_len[i];  j++)
                        t30_amp[i][j] += t38_amp_hist_a[hist_ptr][j] >> 1;
                    memcpy(t38_amp_hist_a[hist_ptr], t38_amp[i], sizeof(int16_t)*SAMPLES_PER_CHUNK);
                }

                if (mode[i] == T38_GATEWAY_FAX)
                {
                    /* Update T.38 gateway timing */
                    logging = t38_gateway_get_logging_state(t38_gateway_state[i]);
                    span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
                    logging = t38_core_get_logging_state(t38_core_state[i]);
                    span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

                    if (drop_frame_rate  &&  --drop_frame == 0)
                    {
                        drop_frame = drop_frame_rate;
                        if (t38_gateway_rx_fillin(t38_gateway_state[i], SAMPLES_PER_CHUNK))
                            break;
                    }
                    else
                    {
                        if (t38_gateway_rx(t38_gateway_state[i], t38_gateway_rx_buf[i], SAMPLES_PER_CHUNK))
                            break;
                    }

                    t38_len[i] = t38_gateway_tx(t38_gateway_state[i], t38_gateway_tx_buf[i], SAMPLES_PER_CHUNK);
                    if (!use_transmit_on_idle)
                    {
                        if (t38_len[i] < SAMPLES_PER_CHUNK)
                        {
                            memset(t38_amp[i] + t38_len[i], 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t38_len[i]));
                            t38_len[i] = SAMPLES_PER_CHUNK;
                        }
                    }
                    if (feedback_audio)
                    {
                        for (j = 0;  j < t30_len[i];  j++)
                            t30_amp[i][j] += t38_amp_hist_a[hist_ptr][j] >> 1;
                        memcpy(t38_amp_hist_a[hist_ptr], t38_amp[i], sizeof(int16_t)*SAMPLES_PER_CHUNK);
                    }

                    if (log_audio)
                    {
                        for (j = 0;  j < t38_len[i];  j++)
                            out_amp[4*j + 2*i + 1] = t38_amp[i][j];
                    }
                }
            }
            if (mode[i] != AUDIO_FAX)
            {
                while ((msg_len = g1050_get(g1050_path[i], msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
                {
#if defined(ENABLE_GUI)
                    if (use_gui)
                        media_monitor_rx(seq_no, tx_when, rx_when);
#endif
                   t38_core_rx_ifp_packet(t38_core_state[i ^ 1], msg, msg_len, seq_no);
                }
            }
        }
        if (log_audio)
        {
            outframes = sf_writef_short(wave_handle, out_amp, SAMPLES_PER_CHUNK);
            if (outframes != SAMPLES_PER_CHUNK)
                break;
        }

        when += (float) SAMPLES_PER_CHUNK/(float) SAMPLE_RATE;

        if (completed[0]  &&  completed[1])
            break;
#if defined(ENABLE_GUI)
        if (use_gui)
            media_monitor_update_display();
#endif
        if (++hist_ptr > 3)
            hist_ptr = 0;
    }
Exemplo n.º 6
0
int main(int argc, char *argv[])
{
    int16_t t38_amp_b[SAMPLES_PER_CHUNK];
    int16_t t30_amp_b[SAMPLES_PER_CHUNK];
    int16_t out_amp[2*SAMPLES_PER_CHUNK];
    int t38_len_b;
    int t30_len_b;
    int msg_len;
    uint8_t msg[1024];
    int log_audio;
    int outframes;
    SNDFILE *wave_handle;
    int t38_version;
    int use_ecm;
    int use_tep;
    int feedback_audio;
    int use_transmit_on_idle;
    const char *input_file_name;
    int i;
    int seq_no;
    int g1050_model_no;
    int g1050_speed_pattern_no;
    double tx_when;
    double rx_when;
    int use_gui;
    int supported_modems;
    int opt;
    t30_state_t *t30;
    t38_core_state_t *t38_core;
    logging_state_t *logging;

    log_audio = false;
    t38_version = 1;
    use_ecm = false;
    input_file_name = INPUT_FILE_NAME;
    simulate_incrementing_repeats = false;
    g1050_model_no = 0;
    g1050_speed_pattern_no = 1;
    use_gui = false;
    use_tep = false;
    feedback_audio = false;
    use_transmit_on_idle = true;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    while ((opt = getopt(argc, argv, "efgi:Ilm:M:s:tv:")) != -1)
    {
        switch (opt)
        {
        case 'e':
            use_ecm = true;
            break;
        case 'f':
            feedback_audio = true;
            break;
        case 'g':
#if defined(ENABLE_GUI)
            use_gui = true;
#else
            fprintf(stderr, "Graphical monitoring not available\n");
            exit(2);
#endif
            break;
        case 'i':
            input_file_name = optarg;
            break;
        case 'I':
            simulate_incrementing_repeats = true;
            break;
        case 'l':
            log_audio = true;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'M':
            g1050_model_no = optarg[0] - 'A' + 1;
            break;
        case 's':
            g1050_speed_pattern_no = atoi(optarg);
            break;
        case 't':
            use_tep = true;
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    wave_handle = NULL;
    if (log_audio)
    {
        if ((wave_handle = sf_open_telephony_write(OUTPUT_FILE_NAME_WAVE, 2)) == NULL)
        {
            fprintf(stderr, "    Cannot create audio file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
    }

    srand48(0x1234567);
    if ((path_a_to_b = g1050_init(g1050_model_no, g1050_speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = g1050_init(g1050_model_no, g1050_speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    if ((t38_state_a = t38_terminal_init(NULL, true, tx_packet_handler_a, &t38_state_b)) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t30 = t38_terminal_get_t30_state(t38_state_a);
    t38_core = t38_terminal_get_t38_core_state(t38_state_a);
    t38_set_t38_version(t38_core, t38_version);

    logging = t38_terminal_get_logging_state(t38_state_a);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    logging = t38_core_get_logging_state(t38_core);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    t30_set_supported_modems(t30, supported_modems);
    t30_set_tx_ident(t30, "11111111");
    t30_set_tx_file(t30, input_file_name, -1, -1);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'A');
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'A');
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'A');
    t30_set_ecm_capability(t30, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    if ((t38_state_b = t38_gateway_init(NULL, tx_packet_handler_b, &t38_state_a)) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_core = t38_gateway_get_t38_core_state(t38_state_b);
    t38_gateway_set_transmit_on_idle(t38_state_b, use_transmit_on_idle);
    t38_set_t38_version(t38_core, t38_version);
    t38_gateway_set_ecm_capability(t38_state_b, use_ecm);

    logging = t38_gateway_get_logging_state(t38_state_b);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    logging = t38_core_get_logging_state(t38_core);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    memset(t38_amp_b, 0, sizeof(t38_amp_b));

    if ((fax_state_b = fax_init(NULL, false)) == NULL)
    {
        fprintf(stderr, "Cannot start FAX\n");
        exit(2);
    }
    t30 = fax_get_t30_state(fax_state_b);
    fax_set_transmit_on_idle(fax_state_b, use_transmit_on_idle);
    fax_set_tep_mode(fax_state_b, use_tep);
    t30_set_supported_modems(t30, supported_modems);
    t30_set_tx_ident(t30, "22222222");
    t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_rx_file(t30, OUTPUT_FILE_NAME, -1);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'B');
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'B');
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'B');
    t30_set_ecm_capability(t30, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    logging = fax_get_logging_state(fax_state_b);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "FAX-B ");

    logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "FAX-B ");

    memset(t30_amp_b, 0, sizeof(t30_amp_b));

#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    for (;;)
    {
        logging = t38_terminal_get_logging_state(t38_state_a);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t38_core = t38_terminal_get_t38_core_state(t38_state_a);
        logging = t38_core_get_logging_state(t38_core);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t30 = t38_terminal_get_t30_state(t38_state_a);
        logging = t30_get_logging_state(t30);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        logging = t38_gateway_get_logging_state(t38_state_b);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t38_core = t38_gateway_get_t38_core_state(t38_state_b);
        logging = t38_core_get_logging_state(t38_core);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        logging = fax_get_logging_state(fax_state_b);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t30 = fax_get_t30_state(fax_state_b);
        logging = t30_get_logging_state(t30);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        memset(out_amp, 0, sizeof(out_amp));

        t38_terminal_send_timeout(t38_state_a, SAMPLES_PER_CHUNK);

        t30_len_b = fax_tx(fax_state_b, t30_amp_b, SAMPLES_PER_CHUNK);
        if (!use_transmit_on_idle)
        {
            /* The receive side always expects a full block of samples, but the
               transmit side may not be sending any when it doesn't need to. We
               may need to pad with some silence. */
            if (t30_len_b < SAMPLES_PER_CHUNK)
            {
                memset(t30_amp_b + t30_len_b, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len_b));
                t30_len_b = SAMPLES_PER_CHUNK;
            }
        }
        if (feedback_audio)
        {
            for (i = 0;  i < t30_len_b;  i++)
                t30_amp_b[i] += t38_amp_b[i] >> 1;
        }
        if (log_audio)
        {
            for (i = 0;  i < t30_len_b;  i++)
                out_amp[2*i + 1] = t30_amp_b[i];
        }
        if (t38_gateway_rx(t38_state_b, t30_amp_b, t30_len_b))
            break;
    
        t38_len_b = t38_gateway_tx(t38_state_b, t38_amp_b, SAMPLES_PER_CHUNK);
        if (!use_transmit_on_idle)
        {
            if (t38_len_b < SAMPLES_PER_CHUNK)
            {
                memset(t38_amp_b + t38_len_b, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t38_len_b));
                t38_len_b = SAMPLES_PER_CHUNK;
            }
        }
        if (log_audio)
        {
            for (i = 0;  i < t38_len_b;  i++)
                out_amp[2*i] = t38_amp_b[i];
        }
        if (fax_rx(fax_state_b, t38_amp_b, SAMPLES_PER_CHUNK))
            break;

        when += (float) SAMPLES_PER_CHUNK/(float) SAMPLE_RATE;

        while ((msg_len = g1050_get(path_a_to_b, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core = t38_gateway_get_t38_core_state(t38_state_b);
            t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
        }
        while ((msg_len = g1050_get(path_b_to_a, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core = t38_terminal_get_t38_core_state(t38_state_a);
            t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
        }
        if (log_audio)
        {
            outframes = sf_writef_short(wave_handle, out_amp, SAMPLES_PER_CHUNK);
            if (outframes != SAMPLES_PER_CHUNK)
                break;
        }

        if (done[0]  &&  done[1])
            break;
#if defined(ENABLE_GUI)
        if (use_gui)
            media_monitor_update_display();
#endif
    }
    t38_terminal_release(t38_state_a);
    fax_release(fax_state_b);
    if (log_audio)
    {
        if (sf_close(wave_handle) != 0)
        {
            fprintf(stderr, "    Cannot close audio file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
    }
    if (!succeeded[0]  ||  !succeeded[1])
    {
        printf("Tests failed\n");
        exit(2);
    }
    printf("Tests passed\n");
    return 0;
}
Exemplo n.º 7
0
int main(int argc, char *argv[])
{
    int16_t t38_amp_a[SAMPLES_PER_CHUNK];
    int16_t t30_amp_a[SAMPLES_PER_CHUNK];
    int16_t out_amp[2*SAMPLES_PER_CHUNK];
    int t38_len_a;
    int t30_len_a;
    int msg_len;
    uint8_t msg[1024];
    int log_audio;
    int outframes;
    int t38_version;
    int use_ecm;
    AFfilesetup filesetup;
    AFfilehandle wave_handle;
    const char *input_file_name;
    int i;
    int seq_no;

    log_audio = FALSE;
    t38_version = 1;
    use_ecm = FALSE;
    input_file_name = INPUT_FILE_NAME;
    simulate_incrementing_repeats = FALSE;
    for (i = 1;  i < argc;  i++)
    {
        if (strcmp(argv[i], "-e") == 0)
        {
            use_ecm = TRUE;
            continue;
        }
        if (strcmp(argv[i], "-i") == 0)
        {
            i++;
            input_file_name = argv[i];
            continue;
        }
        if (strcmp(argv[i], "-I") == 0)
        {
            simulate_incrementing_repeats = TRUE;
            continue;
        }
        if (strcmp(argv[i], "-l") == 0)
        {
            log_audio = TRUE;
            continue;
        }
        if (strcmp(argv[i], "-v") == 0)
        {
            i++;
            t38_version = atoi(argv[i]);
            continue;
        }
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    filesetup = AF_NULL_FILESETUP;
    wave_handle = AF_NULL_FILEHANDLE;
    if (log_audio)
    {
        if ((filesetup = afNewFileSetup()) == AF_NULL_FILESETUP)
        {
            fprintf(stderr, "    Failed to create file setup\n");
            exit(2);
        }
        afInitSampleFormat(filesetup, AF_DEFAULT_TRACK, AF_SAMPFMT_TWOSCOMP, 16);
        afInitRate(filesetup, AF_DEFAULT_TRACK, (float) SAMPLE_RATE);
        afInitFileFormat(filesetup, AF_FILE_WAVE);
        afInitChannels(filesetup, AF_DEFAULT_TRACK, 2);

        wave_handle = afOpenFile(OUTPUT_FILE_NAME_WAVE, "w", filesetup);
        if (wave_handle == AF_NULL_FILEHANDLE)
        {
            fprintf(stderr, "    Cannot create wave file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
    }

    if ((path_a_to_b = ip_network_model_init(800, 2000, 0)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = ip_network_model_init(800, 2000, 0)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    fax_init(&fax_state_a, TRUE);
    t30_set_local_ident(&fax_state_a.t30_state, "11111111");
    t30_set_tx_file(&fax_state_a.t30_state, input_file_name, -1, -1);
    t30_set_phase_b_handler(&fax_state_a.t30_state, phase_b_handler, (void *) (intptr_t) 'A');
    t30_set_phase_d_handler(&fax_state_a.t30_state, phase_d_handler, (void *) (intptr_t) 'A');
    t30_set_phase_e_handler(&fax_state_a.t30_state, phase_e_handler, (void *) (intptr_t) 'A');
    t30_set_ecm_capability(&fax_state_a.t30_state, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(&fax_state_a.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
    span_log_set_level(&fax_state_a.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&fax_state_a.logging, "FAX-A ");
    span_log_set_level(&fax_state_a.t30_state.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&fax_state_a.t30_state.logging, "FAX-A ");
    memset(t30_amp_a, 0, sizeof(t30_amp_a));

    if (t38_gateway_init(&t38_state_a, tx_packet_handler_a, &t38_state_b) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_set_t38_version(&t38_state_a.t38, t38_version);
    t38_gateway_ecm_control(&t38_state_a, use_ecm);
    span_log_set_level(&t38_state_a.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.logging, "T.38-A");
    span_log_set_level(&t38_state_a.t38.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_a.t38.logging, "T.38-A");
    memset(t38_amp_a, 0, sizeof(t38_amp_a));

    if (t38_terminal_init(&t38_state_b, FALSE, tx_packet_handler_b, &t38_state_a) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t38_set_t38_version(&t38_state_b.t38, t38_version);
    span_log_set_level(&t38_state_b.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.logging, "T.38-B");
    span_log_set_level(&t38_state_b.t38.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.t38.logging, "T.38-B");
    span_log_set_level(&t38_state_b.t30_state.logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(&t38_state_b.t30_state.logging, "T.38-B");

    t30_set_local_ident(&t38_state_b.t30_state, "22222222");
    t30_set_rx_file(&t38_state_b.t30_state, OUTPUT_FILE_NAME, -1);
    t30_set_phase_b_handler(&t38_state_b.t30_state, phase_b_handler, (void *) (intptr_t) 'B');
    t30_set_phase_d_handler(&t38_state_b.t30_state, phase_d_handler, (void *) (intptr_t) 'B');
    t30_set_phase_e_handler(&t38_state_b.t30_state, phase_e_handler, (void *) (intptr_t) 'B');
    t30_set_ecm_capability(&t38_state_b.t30_state, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(&t38_state_b.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    for (;;)
    {
        span_log_bump_samples(&fax_state_a.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&fax_state_a.t30_state.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_a.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_a.t38.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.t38.logging, SAMPLES_PER_CHUNK);
        span_log_bump_samples(&t38_state_b.t30_state.logging, SAMPLES_PER_CHUNK);
        memset(out_amp, 0, sizeof(out_amp));

        t38_terminal_send_timeout(&t38_state_b, SAMPLES_PER_CHUNK);

        t30_len_a = fax_tx(&fax_state_a, t30_amp_a, SAMPLES_PER_CHUNK);
        /* The receive side always expects a full block of samples, but the
           transmit side may not be sending any when it doesn't need to. We
           may need to pad with some silence. */
        if (t30_len_a < SAMPLES_PER_CHUNK)
        {
            memset(t30_amp_a + t30_len_a, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t30_len_a));
            t30_len_a = SAMPLES_PER_CHUNK;
        }
        if (log_audio)
        {
            for (i = 0;  i < t30_len_a;  i++)
                out_amp[2*i] = t30_amp_a[i];
        }
        if (t38_gateway_rx(&t38_state_a, t30_amp_a, t30_len_a))
            break;
    
        t38_len_a = t38_gateway_tx(&t38_state_a, t38_amp_a, SAMPLES_PER_CHUNK);
        if (t38_len_a < SAMPLES_PER_CHUNK)
        {
            memset(t38_amp_a + t38_len_a, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - t38_len_a));
            t38_len_a = SAMPLES_PER_CHUNK;
        }
        if (log_audio)
        {
            for (i = 0;  i < t38_len_a;  i++)
                out_amp[2*i + 1] = t38_amp_a[i];
        }
        if (fax_rx(&fax_state_a, t38_amp_a, SAMPLES_PER_CHUNK))
            break;

        while ((msg_len = ip_network_model_get(path_a_to_b, SAMPLES_PER_CHUNK, msg, 1024, &seq_no)) >= 0)
            t38_core_rx_ifp_packet(&t38_state_b.t38, seq_no, msg, msg_len);
        while ((msg_len = ip_network_model_get(path_b_to_a, SAMPLES_PER_CHUNK, msg, 1024, &seq_no)) >= 0)
            t38_core_rx_ifp_packet(&t38_state_a.t38, seq_no, msg, msg_len);

        if (log_audio)
        {
            outframes = afWriteFrames(wave_handle, AF_DEFAULT_TRACK, out_amp, SAMPLES_PER_CHUNK);
            if (outframes != SAMPLES_PER_CHUNK)
                break;
        }

        if (done[0]  &&  done[1])
            break;
    }
    if (log_audio)
    {
        if (afCloseFile(wave_handle) != 0)
        {
            fprintf(stderr, "    Cannot close wave file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
        afFreeFileSetup(filesetup);
    }
    if (!succeeded[0]  ||  !succeeded[1])
    {
        printf("Tests failed\n");
        exit(2);
    }
    printf("Tests passed\n");
    return  0;
}
Exemplo n.º 8
0
int main(int argc, char *argv[])
{
    t30_state_t *t30;
    logging_state_t *logging;
    const char *input_file_name;
    int t38_version;
    int caller;
    int use_ecm;
    int use_tep;
    int options;
    int supported_modems;
    int fill_removal;
    int opt;
    int t38_terminal_operation;
    uint32_t src_addr;
    uint16_t src_port;
    uint32_t dest_addr;
    uint16_t dest_port;

    caller = false;
    use_ecm = false;
    t38_version = 0;
    options = 0;
    input_file_name = INPUT_FILE_NAME;
    fill_removal = false;
    use_tep = false;
    use_transmit_on_idle = true;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    t38_terminal_operation = true;
    log_audio = false;
    src_addr = 0;
    src_port = 0;
    dest_addr = 0;
    dest_port = 0;
    while ((opt = getopt(argc, argv, "cD:d:eFGi:lm:oS:s:tv:")) != -1)
    {
        switch (opt)
        {
        case 'c':
            caller = true;
            break;
        case 'D':
            dest_addr = parse_inet_addr(optarg);
            break;
        case 'd':
            dest_port = atoi(optarg);
            break;
        case 'e':
            use_ecm = true;
            break;
        case 'F':
            fill_removal = true;
            break;
        case 'G':
            t38_terminal_operation = false;
            break;
        case 'i':
            input_file_name = optarg;
            break;
        case 'l':
            log_audio = true;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'o':
            options = atoi(optarg);
            break;
        case 'S':
            src_addr = parse_inet_addr(optarg);
            break;
        case 's':
            src_port = atoi(optarg);
            break;
        case 't':
            use_tep = true;
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    printf("Using T.38 version %d\n", t38_version);

    if (t38_terminal_operation)
    {
        if ((t38_terminal_state = t38_terminal_init(NULL, caller, tx_packet_handler, NULL)) == NULL)
        {
            fprintf(stderr, "Cannot start the T.38 channel\n");
            exit(2);
        }
        t30 = t38_terminal_get_t30_state(t38_terminal_state);
        t38_core = t38_terminal_get_t38_core_state(t38_terminal_state);
        t38_set_t38_version(t38_core, t38_version);
        t38_terminal_set_config(t38_terminal_state, options);
        t38_terminal_set_tep_mode(t38_terminal_state, use_tep);
        t38_terminal_set_fill_bit_removal(t38_terminal_state, fill_removal);

        logging = t38_terminal_get_logging_state(t38_terminal_state);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.38");

        logging = t38_core_get_logging_state(t38_core);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.38");

        logging = t30_get_logging_state(t30);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.38");

        t30_set_supported_modems(t30, supported_modems);
        t30_set_tx_ident(t30, "11111111");
        t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
        if (caller)
            t30_set_tx_file(t30, INPUT_TIFF_FILE_NAME, -1, -1);
        else
            t30_set_rx_file(t30, OUTPUT_TIFF_FILE_NAME, -1);
        t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'A');
        t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'A');
        t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'A');
        t30_set_ecm_capability(t30, use_ecm);
        t30_set_supported_compressions(t30, T4_COMPRESSION_T4_1D | T4_COMPRESSION_T4_2D | T4_COMPRESSION_T6 | T4_COMPRESSION_T85);

        if (pcap_scan_pkts(input_file_name, src_addr, src_port, dest_addr, dest_port, t38_terminal_timing_update, process_packet, NULL))
            exit(2);
        /* Push the time along, to flush out any remaining activity from the application. */
        now.tv_sec += 60;
        t38_terminal_timing_update(NULL, &now);
    }
    else
    {
        wave_handle = NULL;
        if (log_audio)
        {
            if ((wave_handle = sf_open_telephony_write(OUTPUT_WAVE_FILE_NAME, 2)) == NULL)
            {
                fprintf(stderr, "    Cannot create audio file '%s'\n", OUTPUT_WAVE_FILE_NAME);
                exit(2);
            }
        }

        if ((t38_gateway_state = t38_gateway_init(NULL, tx_packet_handler, NULL)) == NULL)
        {
            fprintf(stderr, "Cannot start the T.38 channel\n");
            exit(2);
        }
        t38_core = t38_gateway_get_t38_core_state(t38_gateway_state);
        t38_gateway_set_transmit_on_idle(t38_gateway_state, use_transmit_on_idle);
        t38_set_t38_version(t38_core, t38_version);
        t38_gateway_set_ecm_capability(t38_gateway_state, use_ecm);

        logging = t38_gateway_get_logging_state(t38_gateway_state);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.38");

        logging = t38_core_get_logging_state(t38_core);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "T.38");

        if ((fax_state = fax_init(NULL, caller)) == NULL)
        {
            fprintf(stderr, "Cannot start FAX\n");
            exit(2);
        }
        t30 = fax_get_t30_state(fax_state);
        fax_set_transmit_on_idle(fax_state, use_transmit_on_idle);
        fax_set_tep_mode(fax_state, use_tep);
        t30_set_supported_modems(t30, supported_modems);
        t30_set_tx_ident(t30, "22222222");
        t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
        if (caller)
            t30_set_tx_file(t30, INPUT_TIFF_FILE_NAME, -1, -1);
        else
            t30_set_rx_file(t30, OUTPUT_TIFF_FILE_NAME, -1);
        t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'B');
        t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'B');
        t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'B');
        t30_set_ecm_capability(t30, use_ecm);
        t30_set_supported_compressions(t30, T4_COMPRESSION_T4_1D | T4_COMPRESSION_T4_2D | T4_COMPRESSION_T6);

        logging = fax_get_logging_state(fax_state);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "FAX ");

        logging = t30_get_logging_state(t30);
        span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
        span_log_set_tag(logging, "FAX ");

        if (pcap_scan_pkts(input_file_name, src_addr, src_port, dest_addr, dest_port, t38_gateway_timing_update, process_packet, NULL))
            exit(2);
        /* Push the time along, to flush out any remaining activity from the application. */
        now.tv_sec += 60;
        t38_gateway_timing_update(NULL, &now);

        fax_release(fax_state);
        t38_gateway_release(t38_gateway_state);
        if (log_audio)
        {
            if (sf_close_telephony(wave_handle))
            {
                fprintf(stderr, "    Cannot close audio file '%s'\n", OUTPUT_WAVE_FILE_NAME);
                exit(2);
            }
        }
    }
}
Exemplo n.º 9
0
/*
 *  Init appropriate spandsp objects to receive fax
 */
static int spanfax_init(fax_session_t *f_session, fax_transport_mod_e trans_mode)
{
    t38_terminal_state_t *t38;
    t38_core_state_t *t38_core;
    t30_state_t *t30;
    logging_state_t *logging;
    int log_level;

    int fec_entries = DEFAULT_FEC_ENTRIES;
    int fec_span = DEFAULT_FEC_SPAN;

    printf("fax: %s: start!\n", __func__);

    switch(trans_mode) {
        case FAX_TRANSPORT_T38_MOD:

            memset(f_session->pvt.t38_state, 0, sizeof(t38_terminal_state_t));

			if (t38_terminal_init(f_session->pvt.t38_state, f_session->pvt.caller,
								  t38_tx_packet_handler, f_session) == NULL) {
				printf("fax: Cannot initialize T.38 structs\n");
				return 0;
			}

			t38 = f_session->pvt.t38_state;
			t30 = t38_terminal_get_t30_state(t38);

			t38_core = f_session->pvt.t38_core = t38_terminal_get_t38_core_state(t38);
			t38_terminal_set_config(t38, 0);
			t38_terminal_set_tep_mode(t38, 0);

			if (udptl_init(f_session->pvt.udptl_state, UDPTL_ERROR_CORRECTION_REDUNDANCY,
						   fec_span, fec_entries, (udptl_rx_packet_handler_t *) t38_core_rx_ifp_packet,
						   (void *) f_session->pvt.t38_core) == NULL) {
				printf("fax: Cannot initialize UDPTL structs\n");
				return 0;
			}

			if (f_session->pvt.verbose) {
				log_level = SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG |
						SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL |
						SPAN_LOG_FLOW;

				logging = t38_terminal_get_logging_state(t38);
				span_log_set_message_handler(logging, spanfax_log_message);
				span_log_set_level(logging, log_level);
				span_log_set_tag(logging, f_session->log_tag);

				logging = t38_core_get_logging_state(t38_core);
				span_log_set_message_handler(logging, spanfax_log_message);
				span_log_set_level(logging, log_level);
				span_log_set_tag(logging, f_session->log_tag);

				logging = t30_get_logging_state(t30);
				span_log_set_message_handler(logging, spanfax_log_message);
				span_log_set_level(logging, log_level);
				span_log_set_tag(logging, f_session->log_tag);
			}

            break;
        case FAX_TRANSPORT_AUDIO_MOD:
        default:
            return 0;
            break;
    }

	/* All the things which are common to audio and T.38 FAX setup */

	t30_set_tx_ident(t30, f_session->pvt.ident);
	t30_set_tx_page_header_info(t30, f_session->pvt.header);

	t30_set_phase_e_handler(t30, phase_e_handler, f_session);
	t30_set_phase_d_handler(t30, phase_d_handler, f_session);
	t30_set_phase_b_handler(t30, phase_b_handler, f_session);

	t30_set_supported_image_sizes(t30, T30_SUPPORT_US_LETTER_LENGTH
								  | T30_SUPPORT_US_LEGAL_LENGTH
								  | T30_SUPPORT_UNLIMITED_LENGTH
								  | T30_SUPPORT_215MM_WIDTH
								  | T30_SUPPORT_255MM_WIDTH
								  | T30_SUPPORT_303MM_WIDTH
								  );
	t30_set_supported_resolutions(t30, T30_SUPPORT_STANDARD_RESOLUTION
								  | T30_SUPPORT_FINE_RESOLUTION
								  | T30_SUPPORT_SUPERFINE_RESOLUTION
								  | T30_SUPPORT_R16_RESOLUTION
								  |	T30_SUPPORT_R8_RESOLUTION
								  | T30_SUPPORT_300_300_RESOLUTION
								  | T30_SUPPORT_400_400_RESOLUTION
								  | T30_SUPPORT_600_600_RESOLUTION
								  |	T30_SUPPORT_1200_1200_RESOLUTION
								  |	T30_SUPPORT_300_600_RESOLUTION
								  | T30_SUPPORT_400_800_RESOLUTION
								  | T30_SUPPORT_600_1200_RESOLUTION
								  );
#if 0
	t30_set_supported_colour_resolutions(t30, 0);
#endif

	if (f_session->pvt.disable_v17) {
		t30_set_supported_modems(t30, T30_SUPPORT_V29 | T30_SUPPORT_V27TER);
	} else {
		t30_set_supported_modems(t30, T30_SUPPORT_V29 | T30_SUPPORT_V27TER
								 | T30_SUPPORT_V17);
	}

	if (f_session->pvt.use_ecm) {
		t30_set_ecm_capability(t30, TRUE);
		t30_set_supported_compressions(t30,
									   T30_SUPPORT_T4_1D_COMPRESSION
									   | T30_SUPPORT_T4_2D_COMPRESSION
									   | T30_SUPPORT_T6_COMPRESSION
									   | T30_SUPPORT_T85_COMPRESSION
									   | T30_SUPPORT_T85_L0_COMPRESSION);
	} else {
		t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION
									   | T30_SUPPORT_T4_2D_COMPRESSION);
	}

	if (f_session->pvt.caller) {
		t30_set_tx_file(t30, f_session->pvt.filename, -1, -1);
	} else {
		t30_set_rx_file(t30, f_session->pvt.filename, -1);
	}

	return 0;
}
Exemplo n.º 10
0
int main(int argc, char *argv[])
{
    SNDFILE *wave_handle;
    SNDFILE *input_wave_handle;
    int i;
    int j;
    int k;
    struct machine_s *mc;
    int outframes;
    char buf[128 + 1];
    int16_t silence[SAMPLES_PER_CHUNK];
    int16_t out_amp[2*SAMPLES_PER_CHUNK];
    int alldone;
    const char *input_tiff_file_name;
    const char *input_audio_file_name;
    int log_audio;
    int use_ecm;
    int use_tep;
    int use_transmit_on_idle;
#if defined(WITH_SPANDSP_INTERNALS)
    int use_line_hits;
#endif
    int polled_mode;
    int reverse_flow;
    int use_page_limits;
    int supported_modems;
    int signal_level;
    int noise_level;
    float signal_scaling;
    time_t start_time;
    time_t end_time;
    int scan_line_time;
    char *page_header_info;
    int opt;
    t30_state_t *t30;
    logging_state_t *logging;

    log_audio = false;
    input_tiff_file_name = INPUT_TIFF_FILE_NAME;
    input_audio_file_name = NULL;
    use_ecm = false;
#if defined(WITH_SPANDSP_INTERNALS)
    use_line_hits = false;
#endif
    use_tep = false;
    polled_mode = false;
    page_header_info = NULL;
    reverse_flow = false;
    use_transmit_on_idle = true;
    use_receiver_not_ready = false;
    use_page_limits = false;
    signal_level = 0;
    noise_level = -99;
    scan_line_time = 0;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    while ((opt = getopt(argc, argv, "ehH:i:I:lm:n:prRs:S:tTw:")) != -1)
    {
        switch (opt)
        {
        case 'e':
            use_ecm = true;
            break;
#if defined(WITH_SPANDSP_INTERNALS)
        case 'h':
            use_line_hits = true;
            break;
#endif
        case 'H':
            page_header_info = optarg;
            break;
        case 'i':
            input_tiff_file_name = optarg;
            break;
        case 'I':
            input_audio_file_name = optarg;
            break;
        case 'l':
            log_audio = true;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'n':
            noise_level = atoi(optarg);
            break;
        case 'p':
            polled_mode = true;
            break;
        case 'r':
            reverse_flow = true;
            break;
        case 'R':
            use_receiver_not_ready = true;
            break;
        case 's':
            signal_level = atoi(optarg);
            break;
        case 'S':
            scan_line_time = atoi(optarg);
            break;
        case 't':
            use_tep = true;
            break;
        case 'T':
            use_page_limits = true;
            break;
        case 'w':
            t30_state_to_wreck = atoi(optarg);
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    input_wave_handle = NULL;
    if (input_audio_file_name)
    {
        if ((input_wave_handle = sf_open_telephony_read(input_audio_file_name, 1)) == NULL)
        {
            fprintf(stderr, "    Cannot open audio file '%s'\n", input_audio_file_name);
            exit(2);
        }
    }

    wave_handle = NULL;
    if (log_audio)
    {
        if ((wave_handle = sf_open_telephony_write(OUTPUT_FILE_NAME_WAVE, 2)) == NULL)
        {
            fprintf(stderr, "    Cannot create audio file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
    }

    memset(silence, 0, sizeof(silence));
    for (j = 0;  j < FAX_MACHINES;  j++)
    {
        machines[j].chan = j;
        mc = &machines[j];

        i = mc->chan + 1;
        sprintf(buf, "%d%d%d%d%d%d%d%d", i, i, i, i, i, i, i, i);
        if (reverse_flow)
            mc->fax = fax_init(NULL, (mc->chan & 1)  ?  true  :  false);
        else
            mc->fax = fax_init(NULL, (mc->chan & 1)  ?  false  :  true);
        mc->awgn = NULL;
        signal_scaling = 1.0f;
        if (noise_level > -99)
        {
            mc->awgn = awgn_init_dbm0(NULL, 1234567, noise_level);
            signal_scaling = powf(10.0f, signal_level/20.0f);
            printf("Signal scaling %f\n", signal_scaling);
        }
        fax_set_transmit_on_idle(mc->fax, use_transmit_on_idle);
        fax_set_tep_mode(mc->fax, use_tep);
        t30 = fax_get_t30_state(mc->fax);
        t30_set_tx_ident(t30, buf);
        t30_set_tx_sub_address(t30, "Sub-address");
        t30_set_tx_sender_ident(t30, "Sender ID");
        t30_set_tx_password(t30, "Password");
        t30_set_tx_polled_sub_address(t30, "Polled sub-address");
        t30_set_tx_selective_polling_address(t30, "Selective polling address");
        t30_set_tx_page_header_info(t30, page_header_info);
        t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
        t30_set_ecm_capability(t30, use_ecm);
        t30_set_supported_t30_features(t30,
                                       T30_SUPPORT_IDENTIFICATION
                                     | T30_SUPPORT_SELECTIVE_POLLING
                                     | T30_SUPPORT_SUB_ADDRESSING);

        if ((mc->chan & 1))
            t30_set_minimum_scan_line_time(t30, scan_line_time);
        t30_set_supported_image_sizes(t30,
                                      T30_SUPPORT_US_LETTER_LENGTH
                                    | T30_SUPPORT_US_LEGAL_LENGTH
                                    | T30_SUPPORT_UNLIMITED_LENGTH
                                    | T30_SUPPORT_215MM_WIDTH
                                    | T30_SUPPORT_255MM_WIDTH
                                    | T30_SUPPORT_303MM_WIDTH);
        t30_set_supported_resolutions(t30,
                                      T30_SUPPORT_STANDARD_RESOLUTION
                                    | T30_SUPPORT_FINE_RESOLUTION
                                    | T30_SUPPORT_SUPERFINE_RESOLUTION
                                    | T30_SUPPORT_R8_RESOLUTION
                                    | T30_SUPPORT_R16_RESOLUTION
                                    | T30_SUPPORT_300_300_RESOLUTION
                                    | T30_SUPPORT_400_400_RESOLUTION
                                    | T30_SUPPORT_600_600_RESOLUTION
                                    | T30_SUPPORT_1200_1200_RESOLUTION
                                    | T30_SUPPORT_300_600_RESOLUTION
                                    | T30_SUPPORT_400_800_RESOLUTION
                                    | T30_SUPPORT_600_1200_RESOLUTION);
        t30_set_supported_modems(t30, supported_modems);
        if (use_ecm)
#if defined(SPANDSP_SUPPORT_T85)
            t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION | T30_SUPPORT_T85_COMPRESSION);
#else
            t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
#endif
        if ((mc->chan & 1))
        {
            if (polled_mode)
            {
                if (use_page_limits)
                    t30_set_tx_file(t30, input_tiff_file_name, 3, 6);
                else
                    t30_set_tx_file(t30, input_tiff_file_name, -1, -1);
            }
            else
            {
                sprintf(buf, "fax_tests_%d.tif", (mc->chan + 1)/2);
                t30_set_rx_file(t30, buf, -1);
                t30_set_rx_encoding(t30, T4_COMPRESSION_ITU_T6);
            }
        }
        else
        {
            if (polled_mode)
            {
                sprintf(buf, "fax_tests_%d.tif", (mc->chan + 1)/2);
                t30_set_rx_file(t30, buf, -1);
                t30_set_rx_encoding(t30, T4_COMPRESSION_ITU_T6);
            }
            else
            {
                if (use_page_limits)
                    t30_set_tx_file(t30, input_tiff_file_name, 3, 6);
                else
                    t30_set_tx_file(t30, input_tiff_file_name, -1, -1);
            }
        }
        t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) mc->chan + 'A');
        t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) mc->chan + 'A');
        t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) mc->chan + 'A');
        t30_set_real_time_frame_handler(t30, real_time_frame_handler, (void *) (intptr_t) mc->chan + 'A');
        t30_set_document_handler(t30, document_handler, (void *) (intptr_t) mc->chan + 'A');
        sprintf(mc->tag, "FAX-%d", j + 1);

        logging = t30_get_logging_state(t30);
        span_log_set_level(logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME | SPAN_LOG_FLOW);
        span_log_set_tag(logging, mc->tag);
        if ((j & 1))
        {
            span_log_set_level(&t30->t4.rx.logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME | SPAN_LOG_FLOW);
            span_log_set_tag(&t30->t4.rx.logging, mc->tag);
        }
        else
        {
            span_log_set_level(&t30->t4.tx.logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME | SPAN_LOG_FLOW);
            span_log_set_tag(&t30->t4.tx.logging, mc->tag);
        }
        logging = fax_get_logging_state(mc->fax);
        span_log_set_level(logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME | SPAN_LOG_FLOW);
        span_log_set_tag(logging, mc->tag);

        memset(mc->amp, 0, sizeof(mc->amp));
        mc->total_audio_time = 0;
        mc->done = false;
    }
    time(&start_time);
    for (;;)
    {
        alldone = true;
        for (j = 0;  j < FAX_MACHINES;  j++)
        {
            mc = &machines[j];

            if ((j & 1) == 0  &&  input_audio_file_name)
            {
                mc->len = sf_readf_short(input_wave_handle, mc->amp, SAMPLES_PER_CHUNK);
                if (mc->len == 0)
                    break;
            }
            else
            {
                mc->len = fax_tx(mc->fax, mc->amp, SAMPLES_PER_CHUNK);
                if (mc->awgn)
                {
                    for (k = 0;  k < mc->len;  k++)
                        mc->amp[k] = ((int16_t) (mc->amp[k]*signal_scaling)) + awgn(mc->awgn);
                }
            }
            mc->total_audio_time += SAMPLES_PER_CHUNK;
            if (!use_transmit_on_idle)
            {
                /* The receive side always expects a full block of samples, but the
                   transmit side may not be sending any when it doesn't need to. We
                   may need to pad with some silence. */
                if (mc->len < SAMPLES_PER_CHUNK)
                {
                    memset(mc->amp + mc->len, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - mc->len));
                    mc->len = SAMPLES_PER_CHUNK;
                }
            }
            t30 = fax_get_t30_state(mc->fax);
            logging = t30_get_logging_state(t30);
            span_log_bump_samples(logging, mc->len);
            logging = fax_get_logging_state(mc->fax);
            span_log_bump_samples(logging, mc->len);

            if (log_audio)
            {
                for (k = 0;  k < mc->len;  k++)
                    out_amp[2*k + j] = mc->amp[k];
            }
            if (machines[j ^ 1].len < SAMPLES_PER_CHUNK)
                memset(machines[j ^ 1].amp + machines[j ^ 1].len, 0, sizeof(int16_t)*(SAMPLES_PER_CHUNK - machines[j ^ 1].len));
            t30 = fax_get_t30_state(mc->fax);
#if defined(WITH_SPANDSP_INTERNALS)
            if (use_line_hits)
            {
                /* TODO: This applies very crude line hits. improve it */
                if (t30->state == 22)
                {
                    if (++mc->error_delay == 100)
                    {
                        fprintf(stderr, "HIT %d!\n", j);
                        mc->error_delay = 0;
                        for (k = 0;  k < 5;  k++)
                            mc->amp[k] = 0;
                    }
                }
            }
            if (t30->state == t30_state_to_wreck)
                memset(machines[j ^ 1].amp, 0, sizeof(int16_t)*SAMPLES_PER_CHUNK);
#endif
            if (fax_rx(mc->fax, machines[j ^ 1].amp, SAMPLES_PER_CHUNK))
                break;
            if (!mc->done)
                alldone = false;
        }

        if (log_audio)
        {
            outframes = sf_writef_short(wave_handle, out_amp, SAMPLES_PER_CHUNK);
            if (outframes != SAMPLES_PER_CHUNK)
                break;
        }

        if (alldone  ||  j < FAX_MACHINES)
            break;
    }
    time(&end_time);
    for (j = 0;  j < FAX_MACHINES;  j++)
    {
        mc = &machines[j];
        fax_release(mc->fax);
    }
    if (log_audio)
    {
        if (sf_close(wave_handle))
        {
            fprintf(stderr, "    Cannot close audio file '%s'\n", OUTPUT_FILE_NAME_WAVE);
            exit(2);
        }
    }
    if (input_audio_file_name)
    {
        if (sf_close(input_wave_handle))
        {
            fprintf(stderr, "    Cannot close audio file '%s'\n", input_audio_file_name);
            exit(2);
        }
    }
    printf("Total audio time = %ds (wall time %ds)\n", machines[0].total_audio_time/8000, (int) (end_time - start_time));
    return 0;
}
Exemplo n.º 11
0
void client_run(int client_socket, char *local_ip, int local_port, char *remote_ip, int remote_port)
{
    char sendbuf[RCVBUFSIZE], recvbuf[RCVBUFSIZE], infobuf[RCVBUFSIZE];
	struct sockaddr_in addr = {0}, sendaddr = {0};
    int read_bytes;
	int usock;
	int reuse_addr = 1;
    fax_state_t fax;
	char tmp[512], fn[512], *file_name = "/tmp/test.tiff";
	int send_fax = FALSE;
	int g711 = 0;
	int pcmu = 0;

	snprintf(sendbuf, sizeof(sendbuf), "connect\n\n");
	send(client_socket, sendbuf, strlen(sendbuf), 0);

    if ((read_bytes = recv(client_socket, infobuf, sizeof(infobuf), 0)) < 0) {
        die("recv() failed");
	}

#if SOCKET2ME_DEBUG
	printf("READ [%s]\n", infobuf);
#endif

	if (cheezy_get_var(infobuf, "Channel-Read-Codec-Name", tmp, sizeof(tmp))) {
		if (!strcasecmp(tmp, "pcmu")) {
			g711 = 1;
			pcmu = 1;
		} else if (!strcasecmp(tmp, "pcma")) {
			g711 = 1;
		}
	}


	snprintf(sendbuf, sizeof(sendbuf), "sendmsg\n"
			 "call-command: unicast\n"
			 "local-ip: %s\n"
			 "local-port: %d\n"
			 "remote-ip: %s\n"
			 "remote-port: %d\n"
			 "transport: udp\n"
			 "%s"
			 "\n",
			 local_ip, local_port,
			 remote_ip, remote_port,
			 g711 ? "flags: native\n" : ""
			 );

	
	if (cheezy_get_var(infobuf, "variable_fax_file_name", fn, sizeof(fn))) {
		file_name = fn;
	}

	if (cheezy_get_var(infobuf, "variable_fax_mode", tmp, sizeof(tmp))) {
		if (!strcasecmp(tmp, "send")) {
			send_fax = TRUE;
		}
	}

	if (cheezy_get_var(infobuf, "variable_fax_preexec", tmp, sizeof(tmp))) {
	  set_vars(infobuf);
	  system(tmp);
	}

#if SOCKET2ME_DEBUG
	printf("SEND: [%s]\n", sendbuf);
#endif
	send(client_socket, sendbuf, strlen(sendbuf), 0);

	memset(recvbuf, 0, sizeof(recvbuf));
    if ((read_bytes = recv(client_socket, recvbuf, sizeof(recvbuf), 0)) < 0) {
        die("recv() failed");
	}
#if SOCKET2ME_DEBUG
	printf("READ [%s]\n", recvbuf);
#endif
	
	if ((usock = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP)) < 0) {
        die("socket() failed");
	}

	setsockopt(usock, SOL_SOCKET, SO_REUSEADDR, &reuse_addr, sizeof(reuse_addr));

    addr.sin_family = AF_INET;
    addr.sin_addr.s_addr = htonl(INADDR_ANY);
    /*addr.sin_addr.s_addr = inet_addr(remote_ip);*/
    addr.sin_port = htons(remote_port);

    sendaddr.sin_family = AF_INET;
    sendaddr.sin_addr.s_addr = inet_addr(local_ip);
    sendaddr.sin_port = htons(local_port);
	
    if (bind(usock, (struct sockaddr *) &addr, sizeof(addr)) < 0) {
        die("bind() failed");
	}

	printf("%s Fax filename: [%s] from %s:%d -> %s:%d\n", send_fax ? "Sending" : "Receiving", file_name, local_ip, local_port, remote_ip, remote_port);
	
    fax_init(&fax, send_fax);
    t30_set_local_ident(&fax.t30_state, "Socket 2 ME");
    t30_set_header_info(&fax.t30_state, "Socket 2 ME");
	if (send_fax) {
		t30_set_tx_file(&fax.t30_state, file_name, -1, -1);
	} else {
		t30_set_rx_file(&fax.t30_state, file_name, -1);
	}
    t30_set_phase_b_handler(&fax.t30_state, phase_b_handler, NULL);
    t30_set_phase_d_handler(&fax.t30_state, phase_d_handler, NULL);
    t30_set_phase_e_handler(&fax.t30_state, phase_e_handler, NULL);
    t30_set_document_handler(&fax.t30_state, document_handler, NULL);

    t30_set_ecm_capability(&fax.t30_state, TRUE);
    t30_set_supported_compressions(&fax.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    t30_set_supported_image_sizes(&fax.t30_state, T30_SUPPORT_US_LETTER_LENGTH | T30_SUPPORT_US_LEGAL_LENGTH | T30_SUPPORT_UNLIMITED_LENGTH
                                  | T30_SUPPORT_215MM_WIDTH | T30_SUPPORT_255MM_WIDTH | T30_SUPPORT_303MM_WIDTH);
    t30_set_supported_resolutions(&fax.t30_state, T30_SUPPORT_STANDARD_RESOLUTION | T30_SUPPORT_FINE_RESOLUTION | T30_SUPPORT_SUPERFINE_RESOLUTION
                                  | T30_SUPPORT_R8_RESOLUTION | T30_SUPPORT_R16_RESOLUTION);

	for (;;) {
		struct sockaddr_in local_addr = {0};
        size_t cliAddrLen = sizeof(local_addr);
		unsigned char audiobuf[1024], rawbuf[1024], outbuf[1024];
		short *usebuf = NULL;
		int tx, tx_bytes, bigger, sample_count;
		fd_set ready;

		FD_ZERO(&ready);

		FD_SET(usock, &ready);
		FD_SET(client_socket, &ready);
		
		bigger = usock > client_socket ? usock : client_socket;
		select(++bigger, &ready, NULL, NULL, NULL);
		
		if (FD_ISSET(client_socket, &ready)) {
			memset(recvbuf, 0, sizeof(recvbuf));
			if ((read_bytes = recv(client_socket, recvbuf, sizeof(recvbuf), 0)) < 0) {
				die("recv() failed");
			}

			if (read_bytes == 0) {
				break;
			}
#if SOCKET2ME_DEBUG
			printf("READ [%s]\n", recvbuf);
#endif
		}

		if (!FD_ISSET(usock, &ready)) {
			continue;
		}

        if ((read_bytes = recvfrom(usock, audiobuf, sizeof(audiobuf), 0, (struct sockaddr *) &local_addr, &cliAddrLen)) < 0) {
			die("recvfrom() failed");
		}

		if (g711) {
			int i;
			short *rp = (short *) rawbuf;
			
			for (i = 0; i < read_bytes; i++) {
				if (pcmu) {
					rp[i] = ulaw_to_linear(audiobuf[i]);
				} else {
					rp[i] = alaw_to_linear(audiobuf[i]);
				}
			}
			usebuf = rp;
			sample_count = read_bytes;
		} else {
			usebuf = (short *) audiobuf;
			sample_count = read_bytes / 2;
		}
		
		fax_rx(&fax, usebuf, sample_count);
#if SOCKET2ME_DEBUG
		printf("Handling client %s:%d %d bytes\n", inet_ntoa(local_addr.sin_addr), ntohs(local_addr.sin_port), read_bytes);
#endif

		
		if ((tx = fax_tx(&fax, (short *)outbuf, sample_count)) < 0) {
            printf("Fax Error\n");
			break;
        } else if (!tx) {
			continue;
		}
		

		if (g711) {
			int i;
			short *bp = (short *) outbuf;
			for (i = 0; i < tx; i++) {
				if (pcmu) {
					rawbuf[i] = linear_to_ulaw(bp[i]);
				} else {
					rawbuf[i] = linear_to_alaw(bp[i]);
				}
			}
			usebuf = (short *) rawbuf;
			tx_bytes = tx;
		} else {
			usebuf = (short *)outbuf;
			tx_bytes = tx * 2;
		}	
		

		cliAddrLen = sizeof(sendaddr);
        if (sendto(usock, usebuf, tx_bytes, 0, (struct sockaddr *) &sendaddr, sizeof(sendaddr)) != tx_bytes) {
			die("sendto() sent a different number of bytes than expected");
		}
	}

	close(client_socket);
	close(usock);
		
    t30_terminate(&fax.t30_state);
    fax_release(&fax);

    if (cheezy_get_var(infobuf, "variable_fax_postexec", tmp, sizeof(tmp))) {
      set_vars(infobuf);
      system(tmp);
    }
	printf("Done\n");
	snprintf(sendbuf, sizeof(sendbuf), "hangup\n\n");
	send(client_socket, sendbuf, strlen(sendbuf), 0);
	
}
Exemplo n.º 12
0
int main(int argc, char *argv[])
{
    int msg_len;
    uint8_t msg[1024];
    int t38_version;
    int seq_no;
    int use_ecm;
    int without_pacing;
    int use_tep;
    int model_no;
    int speed_pattern_no;
    const char *input_file_name;
    double tx_when;
    double rx_when;
    int use_gui;
    int supported_modems;
    int opt;
    t30_state_t *t30;
    t38_core_state_t *t38_core;
    logging_state_t *logging;

    t38_version = 1;
    without_pacing = FALSE;
    use_tep = FALSE;
    input_file_name = INPUT_FILE_NAME;
    use_ecm = FALSE;
    simulate_incrementing_repeats = FALSE;
    model_no = 0;
    speed_pattern_no = 1;
    use_gui = FALSE;
    supported_modems = T30_SUPPORT_V27TER | T30_SUPPORT_V29 | T30_SUPPORT_V17;
    while ((opt = getopt(argc, argv, "efgi:Im:M:ps:tv:")) != -1)
    {
        switch (opt)
        {
        case 'e':
            use_ecm = TRUE;
            break;
        case 'g':
#if defined(ENABLE_GUI)
            use_gui = TRUE;
#else
            fprintf(stderr, "Graphical monitoring not available\n");
            exit(2);
#endif
            break;
        case 'i':
            input_file_name = optarg;
            break;
        case 'I':
            simulate_incrementing_repeats = TRUE;
            break;
        case 'm':
            supported_modems = atoi(optarg);
            break;
        case 'M':
            model_no = optarg[0] - 'A' + 1;
            break;
        case 'p':
            without_pacing = TRUE;
            break;
        case 's':
            speed_pattern_no = atoi(optarg);
            break;
        case 't':
            use_tep = TRUE;
            break;
        case 'v':
            t38_version = atoi(optarg);
            break;
        default:
            //usage();
            exit(2);
            break;
        }
    }

    printf("Using T.38 version %d\n", t38_version);
    if (use_ecm)
        printf("Using ECM\n");

    srand48(0x1234567);
    if ((path_a_to_b = g1050_init(model_no, speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }
    if ((path_b_to_a = g1050_init(model_no, speed_pattern_no, 100, 33)) == NULL)
    {
        fprintf(stderr, "Failed to start IP network path model\n");
        exit(2);
    }

    if ((t38_state_a = t38_terminal_init(NULL, TRUE, tx_packet_handler_a, t38_state_b)) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t30 = t38_terminal_get_t30_state(t38_state_a);
    t38_core = t38_terminal_get_t38_core_state(t38_state_a);
    t38_set_t38_version(t38_core, t38_version);
    t38_terminal_set_config(t38_state_a, without_pacing);
    t38_terminal_set_tep_mode(t38_state_a, use_tep);
    
    logging = t38_terminal_get_logging_state(t38_state_a);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    logging = t38_core_get_logging_state(t38_core);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-A");

    t30_set_supported_modems(t30, supported_modems);
    t30_set_tx_ident(t30, "11111111");
    t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_tx_file(t30, input_file_name, -1, -1);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'A');
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'A');
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'A');
    t30_set_ecm_capability(t30, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

    if ((t38_state_b = t38_terminal_init(NULL, FALSE, tx_packet_handler_b, t38_state_a)) == NULL)
    {
        fprintf(stderr, "Cannot start the T.38 channel\n");
        exit(2);
    }
    t30 = t38_terminal_get_t30_state(t38_state_b);
    t38_core = t38_terminal_get_t38_core_state(t38_state_b);
    t38_set_t38_version(t38_core, t38_version);
    t38_terminal_set_config(t38_state_b, without_pacing);
    t38_terminal_set_tep_mode(t38_state_b, use_tep);

    logging = t38_terminal_get_logging_state(t38_state_b);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    logging = t38_core_get_logging_state(t38_core);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    logging = t30_get_logging_state(t30);
    span_log_set_level(logging, SPAN_LOG_DEBUG | SPAN_LOG_SHOW_TAG | SPAN_LOG_SHOW_SAMPLE_TIME);
    span_log_set_tag(logging, "T.38-B");

    t30_set_supported_modems(t30, supported_modems);
    t30_set_tx_ident(t30, "22222222");
    t30_set_tx_nsf(t30, (const uint8_t *) "\x50\x00\x00\x00Spandsp\x00", 12);
    t30_set_rx_file(t30, OUTPUT_FILE_NAME, -1);
    t30_set_phase_b_handler(t30, phase_b_handler, (void *) (intptr_t) 'B');
    t30_set_phase_d_handler(t30, phase_d_handler, (void *) (intptr_t) 'B');
    t30_set_phase_e_handler(t30, phase_e_handler, (void *) (intptr_t) 'B');
    t30_set_ecm_capability(t30, use_ecm);
    if (use_ecm)
        t30_set_supported_compressions(t30, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);

#if defined(ENABLE_GUI)
    if (use_gui)
        start_media_monitor();
#endif
    for (;;)
    {
        logging = t38_terminal_get_logging_state(t38_state_a);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t38_core = t38_terminal_get_t38_core_state(t38_state_a);
        logging = t38_core_get_logging_state(t38_core);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t30 = t38_terminal_get_t30_state(t38_state_a);
        logging = t30_get_logging_state(t30);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        logging = t38_terminal_get_logging_state(t38_state_b);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t38_core = t38_terminal_get_t38_core_state(t38_state_b);
        logging = t38_core_get_logging_state(t38_core);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);
        t30 = t38_terminal_get_t30_state(t38_state_b);
        logging = t30_get_logging_state(t30);
        span_log_bump_samples(logging, SAMPLES_PER_CHUNK);

        done[0] = t38_terminal_send_timeout(t38_state_a, SAMPLES_PER_CHUNK);
        done[1] = t38_terminal_send_timeout(t38_state_b, SAMPLES_PER_CHUNK);

        when += (float) SAMPLES_PER_CHUNK/(float) SAMPLE_RATE;

        while ((msg_len = g1050_get(path_a_to_b, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core = t38_terminal_get_t38_core_state(t38_state_b);
            t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
        }
        while ((msg_len = g1050_get(path_b_to_a, msg, 1024, when, &seq_no, &tx_when, &rx_when)) >= 0)
        {
#if defined(ENABLE_GUI)
            if (use_gui)
                media_monitor_rx(seq_no, tx_when, rx_when);
#endif
            t38_core = t38_terminal_get_t38_core_state(t38_state_a);
            t38_core_rx_ifp_packet(t38_core, msg, msg_len, seq_no);
        }
        if (done[0]  &&  done[1])
            break;
#if defined(ENABLE_GUI)
        if (use_gui)
            media_monitor_update_display();
#endif
    }
    t38_terminal_release(t38_state_a);
    t38_terminal_release(t38_state_b);
    if (!succeeded[0]  ||  !succeeded[1])
    {
        printf("Tests failed\n");
        exit(2);
    }
    printf("Tests passed\n");
    return  0;
}
Exemplo n.º 13
0
static int txfax_exec(struct ast_channel *chan, void *data)
{
    int res = 0;
    char source_file[256];
    char *s;
    char *t;
    char *v;
    const char *x;
    int option;
    int len;
    fax_state_t fax;
    int calling_party;
    int verbose;
    int samples;
    
    struct ast_module_user *u;
    struct ast_frame *inf = NULL;
    struct ast_frame outf;

    int original_read_fmt;
    int original_write_fmt;
    
    uint8_t __buf[sizeof(uint16_t)*MAX_BLOCK_SIZE + 2*AST_FRIENDLY_OFFSET];
    uint8_t *buf = __buf + AST_FRIENDLY_OFFSET;

    if (chan == NULL)
    {
        ast_log(LOG_WARNING, "Fax transmit channel is NULL. Giving up.\n");
        return -1;
    }

    span_set_message_handler(span_message);

    /* The next few lines of code parse out the filename and header from the input string */
    if (data == NULL)
    {
        /* No data implies no filename or anything is present */
        ast_log(LOG_WARNING, "Txfax requires an argument (filename)\n");
        return -1;
    }
    
    calling_party = FALSE;
    verbose = FALSE;
    source_file[0] = '\0'; 

    for (option = 0, v = s = data;  v;  option++, s++)
    {
        t = s;
        v = strchr(s, '|');
        s = (v)  ?  v  :  s + strlen(s);
        strncpy((char *) buf, t, s - t);
        buf[s - t] = '\0';
        if (option == 0)
        {
            /* The first option is always the file name */
            len = s - t;
            if (len > 255)
                len = 255;
            strncpy(source_file, t, len);
            source_file[len] = '\0';
        }
        else if (strncmp("caller", t, s - t) == 0)
        {
            calling_party = TRUE;
        }
        else if (strncmp("debug", t, s - t) == 0)
        {
            verbose = TRUE;
        }
    }

    /* Done parsing */

    u = ast_module_user_add(chan);

    if (chan->_state != AST_STATE_UP)
    {
        /* Shouldn't need this, but checking to see if channel is already answered
         * Theoretically asterisk should already have answered before running the app */
        res = ast_answer(chan);
    }
    
    if (!res)
    {
        original_read_fmt = chan->readformat;
        if (original_read_fmt != AST_FORMAT_SLINEAR)
        {
            res = ast_set_read_format(chan, AST_FORMAT_SLINEAR);
            if (res < 0)
            {
                ast_log(LOG_WARNING, "Unable to set to linear read mode, giving up\n");
                return -1;
            }
        }
        original_write_fmt = chan->writeformat;
        if (original_write_fmt != AST_FORMAT_SLINEAR)
        {
            res = ast_set_write_format(chan, AST_FORMAT_SLINEAR);
            if (res < 0)
            {
                ast_log(LOG_WARNING, "Unable to set to linear write mode, giving up\n");
                res = ast_set_read_format(chan, original_read_fmt);
                if (res)
                    ast_log(LOG_WARNING, "Unable to restore read format on '%s'\n", chan->name);
                return -1;
            }
        }
        fax_init(&fax, calling_party);
        if (verbose)
	    fax.logging.level = SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_FLOW;

        x = pbx_builtin_getvar_helper(chan, "LOCALSTATIONID");
        if (x  &&  x[0])
            t30_set_local_ident(&fax.t30_state, x);
        x = pbx_builtin_getvar_helper(chan, "LOCALHEADERINFO");
        if (x  &&  x[0])
            t30_set_header_info(&fax.t30_state, x);
        t30_set_tx_file(&fax.t30_state, source_file, -1, -1);
        //t30_set_phase_b_handler(&fax.t30_state, phase_b_handler, chan);
        //t30_set_phase_d_handler(&fax.t30_state, phase_d_handler, chan);
        t30_set_phase_e_handler(&fax.t30_state, phase_e_handler, chan);
        t30_set_ecm_capability(&fax.t30_state, TRUE);
        t30_set_supported_compressions(&fax.t30_state, T30_SUPPORT_T4_1D_COMPRESSION | T30_SUPPORT_T4_2D_COMPRESSION | T30_SUPPORT_T6_COMPRESSION);
        while (ast_waitfor(chan, -1) > -1)
        {
            inf = ast_read(chan);
            if (inf == NULL)
            {
                res = -1;
                break;
            }
            if (inf->frametype == AST_FRAME_VOICE)
            {
                if (fax_rx(&fax, inf->data, inf->samples))
                    break;
                samples = (inf->samples <= MAX_BLOCK_SIZE)  ?  inf->samples  :  MAX_BLOCK_SIZE;
                len = fax_tx(&fax, (int16_t *) &buf[AST_FRIENDLY_OFFSET], samples);
                if (len)
                {
                    memset(&outf, 0, sizeof(outf));
                    outf.frametype = AST_FRAME_VOICE;
                    outf.subclass = AST_FORMAT_SLINEAR;
                    outf.datalen = len*sizeof(int16_t);
                    outf.samples = len;
                    outf.data = &buf[AST_FRIENDLY_OFFSET];
                    outf.offset = AST_FRIENDLY_OFFSET;
                    if (ast_write(chan, &outf) < 0)
                    {
                        ast_log(LOG_WARNING, "Unable to write frame to channel; %s\n", strerror(errno));
                        break;
                    }
                }
            }
            ast_frfree(inf);
        }
        if (inf == NULL)
        {
            ast_log(LOG_DEBUG, "Got hangup\n");
            res = -1;
        }
        if (original_read_fmt != AST_FORMAT_SLINEAR)
        {
            res = ast_set_read_format(chan, original_read_fmt);
            if (res)
                ast_log(LOG_WARNING, "Unable to restore read format on '%s'\n", chan->name);
        }
        if (original_write_fmt != AST_FORMAT_SLINEAR)
        {
            res = ast_set_write_format(chan, original_write_fmt);
            if (res)
                ast_log(LOG_WARNING, "Unable to restore write format on '%s'\n", chan->name);
        }
        t30_terminate(&fax.t30_state);
    }
    else
    {
        ast_log(LOG_WARNING, "Could not answer channel '%s'\n", chan->name);
    }
    ast_module_user_remove(u);
    return res;
}