/**
* \brief Turn off power to simulated oven plate, disable tests
*
* This function modified the simulation input to zero (zero watts, no
* power input), then turns off the periodic tests and disables monitoring of
* them.
*
* \param *wattage Pointer to the value representing desired power level
* \param *power Pointer to the value representing whether the desired power
* level should be applied to the induction element.
*/
static void ovenctl_turn_off_plate(uint8_t *wattage, bool *power)
{
*wattage = 0;
*power = false;
/* Turn off and stop monitoring temperature test */
tc_write_clock_source(&OVEN_PERIODIC_TEMPTEST_TC, TC_CLKSEL_OFF_gc);
tc_reset(&OVEN_PERIODIC_TEMPTEST_TC);
classb_intmon_set_state(TEMP_SANITY_TEST, M_DISABLE);
/* Turn off and stop monitoring periodic Class B tests. */
tc_write_clock_source(&OVEN_PERIODIC_CLASSB_TC, TC_CLKSEL_OFF_gc);
tc_reset(&OVEN_PERIODIC_CLASSB_TC);
classb_intmon_set_state(PER_CLASSB_TESTS, M_DISABLE);
}
/**
* public method to get the summary information for the camara.
*
* takes a string buffer to put the information in and returns the length writen.
*/
int tc_get_summary(char * content, const int size_of) {
CameraText text;
int content_length = 0;
int ret;
initCamaraAndContext();
if( initFailed ) {
content_length = snprintf(content, size_of, "No camera detected");
}
else {
ret = gp_camera_get_summary (camera, &text, context);
if (ret < GP_OK) {
// here we will try and reset the camara so next time some one tries to use it hopefully it will re init.
tc_reset();
content_length = snprintf(content, size_of, "Camera failed retrieving summary.");
}
else {
content_length = snprintf(content, size_of, "Summary info from camara:\n %s",text.text);
}
}
return content_length;
}
/**
* \internal
* \brief Test the callback API
*
* This test tests the callback API for the TC. The TC uses one-shot mode.
*
* \param test Current test case.
*/
static void run_callback_test(const struct test_case *test)
{
test_assert_true(test,
tc_init_success == true,
"TC initialization failed, skipping test");
test_assert_true(test,
basic_functionality_test_passed == true,
"Basic functionality test failed, skipping test");
/* Setup TC0 */
tc_reset(&tc_test0_module);
tc_get_config_defaults(&tc_test0_config);
tc_test0_config.wave_generation = TC_WAVE_GENERATION_MATCH_PWM;
tc_test0_config.counter_16_bit.compare_capture_channel\
[TC_COMPARE_CAPTURE_CHANNEL_0] = 0x03FF;
tc_test0_config.counter_16_bit.compare_capture_channel\
[TC_COMPARE_CAPTURE_CHANNEL_1] = 0x03FA;
tc_init(&tc_test0_module, CONF_TEST_TC0, &tc_test0_config);
/* Setup callbacks */
tc_register_callback(&tc_test0_module, tc_callback_function, TC_CALLBACK_CC_CHANNEL1);
tc_enable_callback(&tc_test0_module, TC_CALLBACK_CC_CHANNEL1);
tc_enable(&tc_test0_module);
while ((tc_get_status(&tc_test0_module) & TC_STATUS_COUNT_OVERFLOW) == 0) {
/* Wait for overflow of TC1*/
}
tc_disable(&tc_test0_module);
tc_clear_status(&tc_test0_module, TC_STATUS_COUNT_OVERFLOW);
test_assert_true(test,
callback_function_entered == 1,
"The callback has failed callback_function_entered = %d",
(int)callback_function_entered);
/* Test disable callback function */
tc_disable_callback(&tc_test0_module, TC_CALLBACK_CC_CHANNEL1);
tc_set_count_value(&tc_test0_module, 0x00000000);
tc_enable(&tc_test0_module);
while ((tc_get_status(&tc_test0_module) & TC_STATUS_COUNT_OVERFLOW) == 0) {
/* Wait for overflow of TC1*/
}
/* Test tc_disable() */
tc_disable(&tc_test0_module);
test_assert_true(test,
callback_function_entered == 1,
"Disabling the callback has failed");
}
// function to make sure the camara is initalised
void initCamaraAndContext() {
if(resetNextTime) {
tc_reset();
resetNextTime = false;
}
if( context == NULL && camera == NULL ) {
context = create_context ();
gp_camera_new (&camera);
if( gp_camera_init (camera, context) < GP_OK ) {
initFailed = true;
tc_reset();
}
else {
internal_set_setting("capture", "1");
initFailed = false;
}
}
}
/**
* \internal
* \brief Test basic functionality.
*
* This test tests the basic functionality for the TC. It tests the following functions:
* - tc_get_count_value()
* - tc_stop_counter()
* - tc_set_count_value()
* - tc_start_counter()
*
* \param test Current test case.
*/
static void run_basic_functionality_test(const struct test_case *test)
{
test_assert_true(test,
tc_init_success == true,
"TC initialization failed, skipping test");
/* Setup TC0 */
tc_reset(&tc_test0_module);
tc_get_config_defaults(&tc_test0_config);
tc_init(&tc_test0_module, CONF_TEST_TC0, &tc_test0_config);
tc_enable(&tc_test0_module);
/* Test tc_get_count_value() */
uint32_t test_val0 = tc_get_count_value(&tc_test0_module);
test_assert_true(test,
test_val0 > 0,
"The tc_get_count_value() returned 0 expected larger value");
/* Test tc_stop_counter() */
tc_stop_counter(&tc_test0_module);
uint32_t test_val1 = tc_get_count_value(&tc_test0_module);
uint32_t test_val2 = tc_get_count_value(&tc_test0_module);
test_assert_true(test,
test_val1 == test_val2,
"The counter failed to stop");
/* Test tc_set_count_value() */
tc_set_count_value(&tc_test0_module, 0x00FF);
test_assert_true(test,
tc_get_count_value(&tc_test0_module) == 0x00FF,
"tc_set_count_value() have failed");
/* Test tc_start_counter() */
tc_start_counter(&tc_test0_module);
test_assert_true(test,
tc_get_count_value(&tc_test0_module) > 0x00FF,
"tc_get_count_value() have failed");
basic_functionality_test_passed = true;
}
/**
* \internal
* \brief Test capture and compare
*
* This test uses TC module 0 as a PWM generator (compare function).
* TC module 1 will be set to capture the signal from TC module 0 to test the capture
* functionality.
*
* \param test Current test case.
*/
static void run_16bit_capture_and_compare_test(const struct test_case *test)
{
test_assert_true(test,
tc_init_success == true,
"TC initialization failed, skipping test");
test_assert_true(test,
callback_function_entered == 1,
"The callback test has failed, skipping test");
/* Configure 16-bit TC module for PWM generation */
tc_reset(&tc_test0_module);
tc_get_config_defaults(&tc_test0_config);
tc_test0_config.wave_generation = TC_WAVE_GENERATION_MATCH_PWM;
tc_test0_config.counter_16_bit.compare_capture_channel[TC_COMPARE_CAPTURE_CHANNEL_0] = 0x03FF;
tc_test0_config.counter_16_bit.compare_capture_channel[TC_COMPARE_CAPTURE_CHANNEL_1] = 0x01FF;
/* Calculate the theoretical PWM frequency & duty */
uint32_t frequency_output, duty_output;
frequency_output = system_clock_source_get_hz(SYSTEM_CLOCK_SOURCE_OSC8M)/ (0x03FF+1);
/* This value is depend on the WaveGeneration Mode */
duty_output = (uint32_t)(tc_test0_config.counter_16_bit.compare_capture_channel[TC_COMPARE_CAPTURE_CHANNEL_1]) * 100 \
/ tc_test0_config.counter_16_bit.compare_capture_channel[TC_COMPARE_CAPTURE_CHANNEL_0];
tc_test0_config.pwm_channel[TC_COMPARE_CAPTURE_CHANNEL_1].enabled = true;
tc_test0_config.pwm_channel[TC_COMPARE_CAPTURE_CHANNEL_1].pin_out = CONF_TEST_PIN_OUT;
tc_test0_config.pwm_channel[TC_COMPARE_CAPTURE_CHANNEL_1].pin_mux = CONF_TEST_PIN_MUX;
tc_init(&tc_test0_module, CONF_TEST_TC0, &tc_test0_config);
tc_register_callback(&tc_test0_module, tc_callback_function, TC_CALLBACK_CC_CHANNEL0);
tc_enable_callback(&tc_test0_module, TC_CALLBACK_CC_CHANNEL0);
/* Configure 16-bit TC module for capture */
tc_reset(&tc_test1_module);
tc_get_config_defaults(&tc_test1_config);
tc_test1_config.clock_prescaler = TC_CLOCK_PRESCALER_DIV1;
tc_test1_config.enable_capture_on_channel[CONF_CAPTURE_CHAN_0] = true;
tc_test1_config.enable_capture_on_channel[CONF_CAPTURE_CHAN_1] = true;
tc_init(&tc_test1_module, CONF_TEST_TC1, &tc_test1_config);
struct tc_events tc_events = { .on_event_perform_action = true,
.event_action = TC_EVENT_ACTION_PPW,};
tc_enable_events(&tc_test1_module, &tc_events);
/* Configure external interrupt controller */
struct extint_chan_conf extint_chan_config;
extint_chan_config.gpio_pin = CONF_EIC_PIN;
extint_chan_config.gpio_pin_mux = CONF_EIC_MUX;
extint_chan_config.gpio_pin_pull = EXTINT_PULL_UP;
extint_chan_config.wake_if_sleeping = false;
extint_chan_config.filter_input_signal = false;
extint_chan_config.detection_criteria = EXTINT_DETECT_HIGH;
extint_chan_set_config(0, &extint_chan_config);
/* Configure external interrupt module to be event generator */
struct extint_events extint_event_conf;
extint_event_conf.generate_event_on_detect[0] = true;
extint_enable_events(&extint_event_conf);
/* Configure event system */
struct events_resource event_res;
/* Configure channel */
struct events_config config;
events_get_config_defaults(&config);
config.generator = CONF_EVENT_GENERATOR_ID;
config.edge_detect = EVENTS_EDGE_DETECT_NONE;
config.path = EVENTS_PATH_ASYNCHRONOUS;
events_allocate(&event_res, &config);
/* Configure user */
events_attach_user(&event_res, CONF_EVENT_USED_ID);
/* Enable TC modules */
tc_enable(&tc_test1_module);
tc_enable(&tc_test0_module);
uint16_t period_after_capture = 0;
uint16_t pulse_width_after_capture = 0;
uint32_t capture_frequency = 0;
uint32_t capture_duty = 0;
while (callback_function_entered < 4) {
period_after_capture = tc_get_capture_value(&tc_test1_module,
TC_COMPARE_CAPTURE_CHANNEL_0);
pulse_width_after_capture = tc_get_capture_value(&tc_test1_module,
TC_COMPARE_CAPTURE_CHANNEL_1);
}
if(period_after_capture != 0) {
capture_frequency = system_clock_source_get_hz(SYSTEM_CLOCK_SOURCE_OSC8M)/ period_after_capture;
capture_duty = (uint32_t)(pulse_width_after_capture) * 100 / period_after_capture;
}
test_assert_true(test,
(capture_frequency <= (frequency_output * (100 + CONF_TEST_TOLERANCE) / 100)) && \
(capture_frequency >= (frequency_output * (100 - CONF_TEST_TOLERANCE) / 100)) && \
(capture_duty <= (duty_output * (100 + CONF_TEST_TOLERANCE) / 100)) && \
(capture_duty >= (duty_output * (100 - CONF_TEST_TOLERANCE) / 100)) \
,"The result of Capture is wrong, captured frequency: %ldHz, captured duty: %ld%%",
capture_frequency,
capture_duty
);
}
/**
* \brief Initialize the USART for unit test
*
* Initializes the SERCOM USART used for sending the unit test status to the
* computer via the EDBG CDC gateway.
*/
static void cdc_uart_init(void)
{
struct usart_config usart_conf;
/* Configure USART for unit test output */
usart_get_config_defaults(&usart_conf);
usart_conf.mux_setting = CONF_STDIO_MUX_SETTING;
usart_conf.pinmux_pad0 = CONF_STDIO_PINMUX_PAD0;
usart_conf.pinmux_pad1 = CONF_STDIO_PINMUX_PAD1;
usart_conf.pinmux_pad2 = CONF_STDIO_PINMUX_PAD2;
usart_conf.pinmux_pad3 = CONF_STDIO_PINMUX_PAD3;
usart_conf.baudrate = CONF_STDIO_BAUDRATE;
stdio_serial_init(&cdc_uart_module, CONF_STDIO_USART, &usart_conf);
usart_enable(&cdc_uart_module);
}
/**
* \brief Run TC unit tests
*
* Initializes the system and serial output, then sets up the TC unit test
* suite and runs it.
*/
int main(void)
{
system_init();
cdc_uart_init();
/* Define Test Cases */
DEFINE_TEST_CASE(init_test, NULL,
run_init_test, NULL,
"Initialize tc_xmodules");
DEFINE_TEST_CASE(basic_functionality_test, NULL,
run_basic_functionality_test, NULL,
"test start stop and getters and setters");
DEFINE_TEST_CASE(callback_test, NULL,
run_callback_test, NULL,
"test callback API");
DEFINE_TEST_CASE(reset_32bit_master_test, NULL,
run_reset_32bit_master_test, NULL,
"Setup, reset and reinitialize TC modules of a 32-bit TC");
DEFINE_TEST_CASE(capture_and_compare_test, NULL,
run_16bit_capture_and_compare_test, NULL,
"Test capture and compare");
/* Put test case addresses in an array */
DEFINE_TEST_ARRAY(tc_tests) = {
&init_test,
&basic_functionality_test,
&callback_test,
&reset_32bit_master_test,
&capture_and_compare_test,
};
/* Define the test suite */
DEFINE_TEST_SUITE(tc_suite, tc_tests,
"SAM TC driver test suite");
/* Run all tests in the suite*/
test_suite_run(&tc_suite);
tc_reset(&tc_test0_module);
tc_reset(&tc_test1_module);
while (true) {
/* Intentionally left empty */
}
}
/**
* \internal
* \brief Test initializing and resetting 32-bit TC and reinitialize
*
* This test tests the software reset of a 32-bit TC by the use of the
* tc_reset(). It also test re-enabling the two TC modules used in the 32-bit
* TC into two separate 16-bit TC's.
*
* \param test Current test case.
*/
static void run_reset_32bit_master_test(const struct test_case *test)
{
test_assert_true(test,
tc_init_success == true,
"TC initialization failed, skipping test");
/* Configure 32-bit TC module and run test*/
tc_reset(&tc_test0_module);
tc_get_config_defaults(&tc_test0_config);
tc_test0_config.counter_size = TC_COUNTER_SIZE_32BIT;
tc_init(&tc_test0_module, CONF_TEST_TC0, &tc_test0_config);
tc_enable(&tc_test0_module);
while (tc_is_syncing(&tc_test0_module)) {
/* Synchronize enable */
}
test_assert_true(test,
tc_test0_module.hw->COUNT32.CTRLA.reg & TC_CTRLA_ENABLE,
"Failed first enable of 32-bit TC");
/* Reset and test if both TC modules are disabled after reset */
tc_reset(&tc_test0_module);
while (tc_is_syncing(&tc_test0_module)) {
/* Synchronize reset */
}
test_assert_false(test,
tc_test0_module.hw->COUNT32.CTRLA.reg & TC_CTRLA_ENABLE,
"Failed reset of 32-bit master TC TEST0");
test_assert_false(test,
tc_test1_module.hw->COUNT32.CTRLA.reg & TC_CTRLA_ENABLE,
"Failed reset of 32-bit slave TC TEST1");
/* Change to 16-bit counter on TC0 */
tc_test0_config.counter_size = TC_COUNTER_SIZE_16BIT;
tc_init(&tc_test0_module, CONF_TEST_TC0, &tc_test0_config);
tc_enable(&tc_test0_module);
while (tc_is_syncing(&tc_test0_module)) {
/* Synchronize enable */
}
tc_init(&tc_test1_module, CONF_TEST_TC1, &tc_test1_config);
tc_enable(&tc_test1_module);
while (tc_is_syncing(&tc_test1_module)) {
/* Synchronize enable */
}
test_assert_true(test,
tc_test0_module.hw->COUNT16.CTRLA.reg & TC_CTRLA_ENABLE,
"Failed re-enable of TC TEST0");
test_assert_true(test,
tc_test1_module.hw->COUNT16.CTRLA.reg & TC_CTRLA_ENABLE,
"Failed re-enable of TC TEST1");
}
void platform_delete_bus_timer(void *timer_handle)
{
tc_stop_counter(&bus_tc_instance);
tc_reset(&bus_tc_instance);
hw_timers[0].timer_usage = 0;
}
static int dist_load(int argc, char *argv[])
{
FILE *fp;
double mu, sigma, rho;
if (argc == 1) {
if (!(fp = fopen(argv[0], "r")))
error(-1, errno, "Failed to open file: %s", argv[0]);
}
else
fp = stdin;
short *inverse = dist_make(fp, &mu, &sigma, &rho);
if (!inverse)
error(-1, 0, "Failed to generate distribution");
int ret;
struct nl_sock *sock;
struct rtnl_link *link;
struct rtnl_tc *qdisc_prio = NULL;
struct rtnl_tc *qdisc_netem = NULL;
struct rtnl_tc *cls_fw = NULL;
/* Create connection to netlink */
sock = nl_socket_alloc();
nl_connect(sock, NETLINK_ROUTE);
/* Get interface */
link = tc_get_link(sock, cfg.dev);
if (!link)
error(-1, 0, "Interface does not exist: %s", cfg.dev);
/* Reset TC subsystem */
ret = tc_reset(sock, link);
if (ret && ret != -NLE_OBJ_NOTFOUND)
error(-1, 0, "Failed to reset TC: %s", nl_geterror(ret));
/* Setup TC subsystem */
if ((ret = tc_prio(sock, link, &qdisc_prio)))
error(-1, 0, "Failed to setup TC: prio qdisc: %s", nl_geterror(ret));
if ((ret = tc_classifier(sock, link, &cls_fw, cfg.mark, cfg.mask)))
error(-1, 0, "Failed to setup TC: fw filter: %s", nl_geterror(ret));
if ((ret = tc_netem(sock, link, &qdisc_netem)))
error(-1, 0, "Failed to setup TC: netem qdisc: %s", nl_geterror(ret));
/* We will use the default normal distribution for now */
if (rtnl_netem_set_delay_distribution_data((struct rtnl_qdisc *) qdisc_netem, inverse, TABLESIZE))
error(-1, 0, "Failed to set netem delay distrubtion: %s", nl_geterror(ret));
rtnl_netem_set_delay((struct rtnl_qdisc *) qdisc_netem, mu);
rtnl_netem_set_jitter((struct rtnl_qdisc *) qdisc_netem, sigma);
nl_close(sock);
nl_socket_free(sock);
return 0;
}
