// SkCodec's wbmp decoder was initially more restrictive than SkImageDecoder.
// It required the second byte to be zero. But SkImageDecoder allowed a couple
// of bits to be 1 (so long as they do not overlap with 0x9F). Test that
// SkCodec now supports an image with these bits set.
DEF_TEST(Codec_wbmp, r) {
const char* path = "mandrill.wbmp";
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
// Modify the stream to contain a second byte with some bits set.
SkAutoTUnref<SkData> data(SkCopyStreamToData(stream));
uint8_t* writeableData = static_cast<uint8_t*>(data->writable_data());
writeableData[1] = static_cast<uint8_t>(~0x9F);
// SkImageDecoder supports this.
SkBitmap bitmap;
REPORTER_ASSERT(r, SkImageDecoder::DecodeMemory(data->data(), data->size(), &bitmap));
// So SkCodec should, too.
SkAutoTDelete<SkCodec> codec(SkCodec::NewFromData(data));
REPORTER_ASSERT(r, codec);
if (!codec) {
return;
}
test_info(r, codec.get(), codec->getInfo(), SkCodec::kSuccess, nullptr);
}
void test_ext_gcd()
{
const char *list[][3] = {
{"2","3","1"},
{"2","4","2"},
{"20","40","20"},
{"-20","31","1"},
{"-20","-30","10"}
};
int n = sizeof(list)/sizeof(list[0]);
int correct = 0;
test_info(stderr,"Start testing ext_gcd.");
for(int i = 0; i < n; i++)
{
mpz_t a,b,c,d,e,f;
mpz_init_set_str(a,list[i][0],10);
mpz_init_set_str(b,list[i][1],10);
mpz_init_set_str(c,list[i][2],10);
mpz_init(d);
mpz_init(e);
mpz_init(f);
cpt_ext_gcd(d,e,f,a,b);
if(mpz_cmp(c,d)!=0)
{
test_unmatch(stderr,"test_ext_gcd",c,d);
}
else
{
mpz_mul(d,e,a);
mpz_addmul(d,f,b);
if(mpz_cmp(c,d)!=0)
test_unmatch(stderr,"test_ext_gcd",c,d);
else
correct++;
}
mpz_clear(a);
mpz_clear(b);
mpz_clear(c);
mpz_clear(d);
mpz_clear(e);
mpz_clear(f);
}
if(correct == n)
test_info(stderr,"test_ext_gcd success.");
else
test_info(stderr,"test_ext_gcd failed.");
}
static void
siginfo(int unused __attribute__((__unused__)))
{
char buf[256];
test_info(buf, sizeof(buf));
atomicio(vwrite, STDERR_FILENO, buf, strlen(buf));
}
void test_inv_mod()
{
const char *list[][2] = {
{"2","3"},
{"2","5"},
{"20","41"},
{"-20","31"},
{"-20","-29"}
};
int n = sizeof(list)/sizeof(list[0]);
int correct = 0;
test_info(stderr,"Start testing inv_mod.");
for(int i = 0; i < n; i++)
{
mpz_t a,b,c,d;
mpz_init_set_str(a,list[i][0],10);
mpz_init_set_str(b,list[i][1],10);
mpz_init(c);
mpz_init(d);
cpt_inv_mod(d,a,b);
mpz_mul(c,a,d);
mpz_mod(c,c,b);
if(mpz_cmp_si(c,1)!=0)
{
mpz_t tmp;
mpz_init_set_si(tmp,1);
test_unmatch(stderr,"test_inv_mod",c,tmp);
mpz_clear(tmp);
}
else
{
correct++;
}
mpz_clear(a);
mpz_clear(b);
mpz_clear(c);
mpz_clear(d);
}
if(correct == n)
test_info(stderr,"test_inv_mod success.");
else
test_info(stderr,"test_inv_mod failed.");
}
static void
run_test (void)
{
guestfs_h *g;
size_t i;
printf ("Warming up the libguestfs cache ...\n");
for (i = 0; i < NR_WARMUP_PASSES; ++i) {
g = create_handle ();
add_drive (g);
if (guestfs_launch (g) == -1)
exit (EXIT_FAILURE);
guestfs_close (g);
}
printf ("Running the tests in %d passes ...\n", NR_TEST_PASSES);
for (i = 0; i < NR_TEST_PASSES; ++i) {
g = create_handle ();
set_up_event_handlers (g, i);
start_libvirt_thread (i);
add_drive (g);
if (guestfs_launch (g) == -1)
exit (EXIT_FAILURE);
guestfs_close (g);
stop_libvirt_thread ();
printf (" pass %zu: %zu events collected in %" PRIi64 " ns\n",
i+1, pass_data[i].nr_events, pass_data[i].elapsed_ns);
}
if (verbose)
dump_pass_data ();
printf ("Analyzing the results ...\n");
check_pass_data ();
construct_timeline ();
analyze_timeline ();
if (verbose)
dump_timeline ();
printf ("\n");
g = create_handle ();
test_info (g, NR_TEST_PASSES);
guestfs_close (g);
printf ("\n");
print_analysis ();
printf ("\n");
printf ("Longest activities:\n");
printf ("\n");
print_longest_to_shortest ();
free_pass_data ();
free_final_timeline ();
}
void test_gcd_list()
{
const char *list[][7] = {
{"3","2","3","5","1"},
{"4","2","4","2","6","2"},
{"4","20","40","20","15","5"},
{"3","-20","31","1","1"},
{"5","-20","-30","10","8","16","2"}
};
int n = sizeof(list)/sizeof(list[0]);
int correct = 0;
test_info(stderr,"Start testing gcd list.");
for(int i = 0; i < n; i++)
{
mpz_t *l, c, d;
int t = atoi(list[i][0]);
l = (mpz_t *)malloc(sizeof(mpz_t)*t);
for(int j = 0; j < t; j++)
mpz_init_set_str(l[j],list[i][j+1],10);
mpz_init_set_str(c,list[i][t+1],10);
mpz_init(d);
cpt_gcd_list(d,l,t);
if(mpz_cmp(c,d)!=0)
{
test_unmatch(stderr,"test_gcd_list",c,d);
}
else
{
correct++;
}
for(int j = 0; j < t; j++)
mpz_clear(l[j]);
mpz_clear(c);
mpz_clear(d);
free(l);
}
if(correct == n)
test_info(stderr,"test_gcd_list success.");
else
test_info(stderr,"test_gcd_list failed.");
}
static void
siginfo(int unused __unused)
{
char buf[256];
test_info(buf, sizeof(buf));
atomicio(vwrite, STDERR_FILENO, buf, strlen(buf));
if (last_fuzz != NULL) {
fuzz_fmt(last_fuzz, buf, sizeof(buf));
atomicio(vwrite, STDERR_FILENO, buf, strlen(buf));
}
}
// Test that even if webp_parse_header fails to peek enough, it will fall back to read()
// + rewind() and succeed.
DEF_TEST(Codec_webp_peek, r) {
const char* path = "baby_tux.webp";
SkString fullPath(GetResourcePath(path));
SkAutoTUnref<SkData> data(SkData::NewFromFileName(fullPath.c_str()));
if (!data) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
// The limit is less than webp needs to peek or read.
SkAutoTDelete<SkCodec> codec(SkCodec::NewFromStream(new LimitedPeekingMemStream(data, 25)));
REPORTER_ASSERT(r, codec);
test_info(r, codec.get(), codec->getInfo(), SkCodec::kSuccess, nullptr);
// Similarly, a stream which does not peek should still succeed.
codec.reset(SkCodec::NewFromStream(new LimitedPeekingMemStream(data, 0)));
REPORTER_ASSERT(r, codec);
test_info(r, codec.get(), codec->getInfo(), SkCodec::kSuccess, nullptr);
}
DEF_TEST(Codec_raw_notseekable, r) {
const char* path = "dng_with_preview.dng";
SkString fullPath(GetResourcePath(path));
SkAutoTUnref<SkData> data(SkData::NewFromFileName(fullPath.c_str()));
if (!data) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkCodec> codec(SkCodec::NewFromStream(new NotAssetMemStream(data)));
REPORTER_ASSERT(r, codec);
test_info(r, codec.get(), codec->getInfo(), SkCodec::kSuccess, nullptr);
}
static void test_codec(skiatest::Reporter* r, Codec* codec, SkBitmap& bm, const SkImageInfo& info,
const SkISize& size, SkCodec::Result expectedResult, SkMD5::Digest* digest,
const SkMD5::Digest* goodDigest) {
REPORTER_ASSERT(r, info.dimensions() == size);
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
SkCodec::Result result = codec->getPixels(info, bm.getPixels(), bm.rowBytes());
REPORTER_ASSERT(r, result == expectedResult);
md5(bm, digest);
if (goodDigest) {
REPORTER_ASSERT(r, *digest == *goodDigest);
}
{
// Test decoding to 565
SkImageInfo info565 = info.makeColorType(kRGB_565_SkColorType);
SkCodec::Result expected565 = info.alphaType() == kOpaque_SkAlphaType ?
expectedResult : SkCodec::kInvalidConversion;
test_info(r, codec, info565, expected565, nullptr);
}
// Verify that re-decoding gives the same result. It is interesting to check this after
// a decode to 565, since choosing to decode to 565 may result in some of the decode
// options being modified. These options should return to their defaults on another
// decode to kN32, so the new digest should match the old digest.
test_info(r, codec, info, expectedResult, digest);
{
// Check alpha type conversions
if (info.alphaType() == kOpaque_SkAlphaType) {
test_info(r, codec, info.makeAlphaType(kUnpremul_SkAlphaType),
expectedResult, digest);
test_info(r, codec, info.makeAlphaType(kPremul_SkAlphaType),
expectedResult, digest);
} else {
// Decoding to opaque should fail
test_info(r, codec, info.makeAlphaType(kOpaque_SkAlphaType),
SkCodec::kInvalidConversion, nullptr);
SkAlphaType otherAt = info.alphaType();
if (kPremul_SkAlphaType == otherAt) {
otherAt = kUnpremul_SkAlphaType;
} else {
otherAt = kPremul_SkAlphaType;
}
// The other non-opaque alpha type should always succeed, but not match.
test_info(r, codec, info.makeAlphaType(otherAt), expectedResult, nullptr);
}
}
}
int main()
{
while(1){
int number;
printf("type in your test number: ");
scanf("%d",&number);
switch (number) {
case 1: test_create(); break;
case 2: test_close(); break;
case 3: test_createwait();break;
case 4: test_sig();break;
case 5: test_info();break;
case 6: test_chown();break;
case 7: test_chmod();break;
case 8: test_stat();break;
default: printf("Wrong input test number");
}
}
}
void Analyze::results_json(Json::Value &root)
{
Json::Value tests;
uint16_t total_evilness= 0;
for (std::vector<Analyzer*>::iterator it = _analyzers.begin();
it != _analyzers.end();
++it) {
Analyzer *analyzer = *it;
const std::string name = analyzer->name();
if (tests[name].isNull()) {
Json::Value test_info(Json::objectValue);
test_info["description"] = analyzer->description();
test_info["name"] = name;
test_info["results"] = Json::Value(Json::arrayValue);
tests[name] = test_info;
}
analyzer->results_json_results(tests[name]["results"]);
tests[name]["status"] = analyzer->status_as_string();
tests[name]["severity-score"] = tests[name]["severity-score"].asLargestUInt() + analyzer->severity_score();
if (!pure_output()) {
tests[name]["evilness"] = tests[name]["severity-score"];
tests[name]["evilness-is-deprecated"] = "Use severity-score";
}
total_evilness += analyzer->severity_score();
}
root["severity-score"] = total_evilness;
if (!pure_output()) {
root["evilness"] = root["severity-score"];
root["evilness-is-deprecated"] = "Use severity-score";
}
root["tests"] = tests;
results_json_add_version(root);
results_json_add_statistics(root);
}
void test_end(void)
{
gat_free();
int32 total = 0, failed = 0, success = 0;
for (int i = 0; i < CASE_NUM; i++)
{
if (ginfo[i].used)
{
total++;
if (ginfo[i].success)
{
success++;
}
else
{
failed++;
}
}
}
test_info();
printf("%s\n", failed > 0 ? "FAIL" : "PASS");
printf(" %d cases executed. S: %d. F: %d.\n", total, success, failed);
if (failed > 0)
{
for (int i = 0; i < CASE_NUM; i++)
{
if (ginfo[i].used && !ginfo[i].success)
{
printf(" %s FAILED\n", ginfo[i].case_name);
}
}
}
for (int i = 0; i < CASE_NUM; i++)
{
ginfo[i].used = FALSE;
}
}
int main(int argc, char* argv[])
{
int ch, conn_timeout = 10, rw_timeout = 10;
acl::string addr("127.0.0.1:6379"), cmd, node;
while ((ch = getopt(argc, argv, "hs:n:C:T:a:i:")) > 0) {
switch (ch) {
case 'h':
usage(argv[0]);
return 0;
case 's':
addr = optarg;
break;
case 'C':
conn_timeout = atoi(optarg);
break;
case 'T':
rw_timeout = atoi(optarg);
break;
case 'a':
cmd = optarg;
break;
case 'i':
node = optarg;
break;
default:
break;
}
}
acl::acl_cpp_init();
acl::redis_client client(addr.c_str(), conn_timeout, rw_timeout);
acl::redis_cluster redis(&client);
bool ret;
if (cmd == "slots")
ret = test_slots(redis);
else if (cmd == "preset")
ret = preset_all(addr.c_str());
else if (cmd == "nodes")
ret = test_nodes(redis);
else if (cmd == "slaves") {
if (node.empty()) {
printf("usage: %s -a slaves -i node\r\n", argv[0]);
return 1;
}
ret = test_slaves(redis, node.c_str());
} else if (cmd == "info")
ret = test_info(redis);
else {
ret = false;
printf("unknown cmd: %s\r\n", cmd.c_str());
}
if (ret == true)
printf("test OK!\r\n");
else
printf("test failed!\r\n");
#ifdef WIN32
printf("enter any key to exit\r\n");
getchar();
#endif
return 0;
}
void test_rat_approx()
{
const char *list[][7] = {
{"3","8/3","2","3","8/3"},
{"3","11/4","2","3","11/4"},
{"4","4999/10000","0","1/2","2499/4999","4999/10000"},
{"4","4999/9997","0","1","1/2","4999/9997"},
{"5","523/311","1","2","5/3","37/22","523/311"}
};
int n = sizeof(list)/sizeof(list[0]);
int correct = 0;
test_info(stderr,"Start testing rat_approx.");
for(int i = 0; i < n; i++)
{
mpq_t *l, *res, c;
unsigned int t = atoi(list[i][0]), tt;
l = (mpq_t *)malloc(sizeof(mpq_t)*t);
res = (mpq_t *)malloc(sizeof(mpq_t)*t);
for(int j = 0; j < t; j++)
{
mpq_init(l[j]);
mpq_set_str(l[j],list[i][j+2],10);
mpq_init(res[j]);
}
mpq_init(c);
mpq_set_str(c,list[i][1],10);
tt = t;
cpt_rat_approx(res,c,&tt);
if(t != tt)
{
test_error(stderr,"test_rat_approx","number different");
test_unmatch_ui(stderr,"test_rat_approx",t,tt);
}
else
{
int nerr = 0;
for(int j = 0; j < t; j++)
{
if(!mpq_equal(l[j],res[j]))
{
test_error(stderr,"test_rat_approx","result different");
test_unmatch_q(stderr,"test_rat_approx",l[j],res[j]);
nerr++;
}
}
if(!nerr)
{
correct++;
}
}
for(int j = 0; j < t; j++)
{
mpq_clear(l[j]);
mpq_clear(res[j]);
}
mpq_clear(c);
free(l);
free(res);
}
if(correct == n)
test_info(stderr,"test_rat_approx success.");
else
test_info(stderr,"test_rat_approx failed.");
}
int test_tick( wpan_dev_t *dev)
{
test_info( "wpan dev called tick...\n");
return 0;
}
static void test_codec(skiatest::Reporter* r, Codec* codec, SkBitmap& bm, const SkImageInfo& info,
const SkISize& size, SkCodec::Result expectedResult, SkMD5::Digest* digest,
const SkMD5::Digest* goodDigest) {
REPORTER_ASSERT(r, info.dimensions() == size);
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
SkCodec::Result result = codec->getPixels(info, bm.getPixels(), bm.rowBytes());
REPORTER_ASSERT(r, result == expectedResult);
md5(bm, digest);
if (goodDigest) {
REPORTER_ASSERT(r, *digest == *goodDigest);
}
{
// Test decoding to 565
SkImageInfo info565 = info.makeColorType(kRGB_565_SkColorType);
if (info.alphaType() == kOpaque_SkAlphaType) {
// Decoding to 565 should succeed.
SkBitmap bm565;
bm565.allocPixels(info565);
SkAutoLockPixels alp(bm565);
// This will allow comparison even if the image is incomplete.
bm565.eraseColor(SK_ColorBLACK);
REPORTER_ASSERT(r, expectedResult == codec->getPixels(info565,
bm565.getPixels(), bm565.rowBytes()));
SkMD5::Digest digest565;
md5(bm565, &digest565);
// A dumb client's request for non-opaque should also succeed.
for (auto alpha : { kPremul_SkAlphaType, kUnpremul_SkAlphaType }) {
info565 = info565.makeAlphaType(alpha);
test_info(r, codec, info565, expectedResult, &digest565);
}
} else {
test_info(r, codec, info565, SkCodec::kInvalidConversion, nullptr);
}
}
if (codec->getInfo().colorType() == kGray_8_SkColorType) {
SkImageInfo grayInfo = codec->getInfo();
SkBitmap grayBm;
grayBm.allocPixels(grayInfo);
SkAutoLockPixels alp(grayBm);
grayBm.eraseColor(SK_ColorBLACK);
REPORTER_ASSERT(r, expectedResult == codec->getPixels(grayInfo,
grayBm.getPixels(), grayBm.rowBytes()));
SkMD5::Digest grayDigest;
md5(grayBm, &grayDigest);
for (auto alpha : { kPremul_SkAlphaType, kUnpremul_SkAlphaType }) {
grayInfo = grayInfo.makeAlphaType(alpha);
test_info(r, codec, grayInfo, expectedResult, &grayDigest);
}
}
// Verify that re-decoding gives the same result. It is interesting to check this after
// a decode to 565, since choosing to decode to 565 may result in some of the decode
// options being modified. These options should return to their defaults on another
// decode to kN32, so the new digest should match the old digest.
test_info(r, codec, info, expectedResult, digest);
{
// Check alpha type conversions
if (info.alphaType() == kOpaque_SkAlphaType) {
test_info(r, codec, info.makeAlphaType(kUnpremul_SkAlphaType),
expectedResult, digest);
test_info(r, codec, info.makeAlphaType(kPremul_SkAlphaType),
expectedResult, digest);
} else {
// Decoding to opaque should fail
test_info(r, codec, info.makeAlphaType(kOpaque_SkAlphaType),
SkCodec::kInvalidConversion, nullptr);
SkAlphaType otherAt = info.alphaType();
if (kPremul_SkAlphaType == otherAt) {
otherAt = kUnpremul_SkAlphaType;
} else {
otherAt = kPremul_SkAlphaType;
}
// The other non-opaque alpha type should always succeed, but not match.
test_info(r, codec, info.makeAlphaType(otherAt), expectedResult, nullptr);
}
}
}
static void check(skiatest::Reporter* r,
const char path[],
SkISize size,
bool supportsScanlineDecoding,
bool supportsSubsetDecoding,
bool supportsIncomplete = true) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkCodec> codec(nullptr);
bool isIncomplete = supportsIncomplete;
if (isIncomplete) {
size_t size = stream->getLength();
SkAutoTUnref<SkData> data((SkData::NewFromStream(stream, 2 * size / 3)));
codec.reset(SkCodec::NewFromData(data));
} else {
codec.reset(SkCodec::NewFromStream(stream.release()));
}
if (!codec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
// Test full image decodes with SkCodec
SkMD5::Digest codecDigest;
const SkImageInfo info = codec->getInfo().makeColorType(kN32_SkColorType);
SkBitmap bm;
SkCodec::Result expectedResult = isIncomplete ? SkCodec::kIncompleteInput : SkCodec::kSuccess;
test_codec(r, codec.get(), bm, info, size, expectedResult, &codecDigest, nullptr);
// Scanline decoding follows.
// Need to call startScanlineDecode() first.
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
REPORTER_ASSERT(r, codec->skipScanlines(1)
== 0);
const SkCodec::Result startResult = codec->startScanlineDecode(info);
if (supportsScanlineDecoding) {
bm.eraseColor(SK_ColorYELLOW);
REPORTER_ASSERT(r, startResult == SkCodec::kSuccess);
for (int y = 0; y < info.height(); y++) {
const int lines = codec->getScanlines(bm.getAddr(0, y), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, 1 == lines);
}
}
// verify that scanline decoding gives the same result.
if (SkCodec::kTopDown_SkScanlineOrder == codec->getScanlineOrder()) {
compare_to_good_digest(r, codecDigest, bm);
}
// Cannot continue to decode scanlines beyond the end
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
// Interrupting a scanline decode with a full decode starts from
// scratch
REPORTER_ASSERT(r, codec->startScanlineDecode(info) == SkCodec::kSuccess);
const int lines = codec->getScanlines(bm.getAddr(0, 0), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, lines == 1);
}
REPORTER_ASSERT(r, codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes())
== expectedResult);
REPORTER_ASSERT(r, codec->getScanlines(bm.getAddr(0, 0), 1, 0)
== 0);
REPORTER_ASSERT(r, codec->skipScanlines(1)
== 0);
// Test partial scanline decodes
if (supports_partial_scanlines(path) && info.width() >= 3) {
SkCodec::Options options;
int width = info.width();
int height = info.height();
SkIRect subset = SkIRect::MakeXYWH(2 * (width / 3), 0, width / 3, height);
options.fSubset = ⊂
const SkCodec::Result partialStartResult = codec->startScanlineDecode(info, &options,
nullptr, nullptr);
REPORTER_ASSERT(r, partialStartResult == SkCodec::kSuccess);
for (int y = 0; y < height; y++) {
const int lines = codec->getScanlines(bm.getAddr(0, y), 1, 0);
if (!isIncomplete) {
REPORTER_ASSERT(r, 1 == lines);
}
}
}
} else {
REPORTER_ASSERT(r, startResult == SkCodec::kUnimplemented);
}
// The rest of this function tests decoding subsets, and will decode an arbitrary number of
// random subsets.
// Do not attempt to decode subsets of an image of only once pixel, since there is no
// meaningful subset.
if (size.width() * size.height() == 1) {
return;
}
SkRandom rand;
SkIRect subset;
SkCodec::Options opts;
opts.fSubset = ⊂
for (int i = 0; i < 5; i++) {
subset = generate_random_subset(&rand, size.width(), size.height());
SkASSERT(!subset.isEmpty());
const bool supported = codec->getValidSubset(&subset);
REPORTER_ASSERT(r, supported == supportsSubsetDecoding);
SkImageInfo subsetInfo = info.makeWH(subset.width(), subset.height());
SkBitmap bm;
bm.allocPixels(subsetInfo);
const SkCodec::Result result = codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes(),
&opts, nullptr, nullptr);
if (supportsSubsetDecoding) {
REPORTER_ASSERT(r, result == expectedResult);
// Webp is the only codec that supports subsets, and it will have modified the subset
// to have even left/top.
REPORTER_ASSERT(r, SkIsAlign2(subset.fLeft) && SkIsAlign2(subset.fTop));
} else {
// No subsets will work.
REPORTER_ASSERT(r, result == SkCodec::kUnimplemented);
}
}
// SkAndroidCodec tests
if (supportsScanlineDecoding || supportsSubsetDecoding) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkAndroidCodec> androidCodec(nullptr);
if (isIncomplete) {
size_t size = stream->getLength();
SkAutoTUnref<SkData> data((SkData::NewFromStream(stream, 2 * size / 3)));
androidCodec.reset(SkAndroidCodec::NewFromData(data));
} else {
androidCodec.reset(SkAndroidCodec::NewFromStream(stream.release()));
}
if (!androidCodec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
SkBitmap bm;
SkMD5::Digest androidCodecDigest;
test_codec(r, androidCodec.get(), bm, info, size, expectedResult, &androidCodecDigest,
&codecDigest);
}
if (!isIncomplete) {
// Test SkCodecImageGenerator
SkAutoTDelete<SkStream> stream(resource(path));
SkAutoTUnref<SkData> fullData(SkData::NewFromStream(stream, stream->getLength()));
SkAutoTDelete<SkImageGenerator> gen(SkCodecImageGenerator::NewFromEncodedCodec(fullData));
SkBitmap bm;
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
REPORTER_ASSERT(r, gen->getPixels(info, bm.getPixels(), bm.rowBytes()));
compare_to_good_digest(r, codecDigest, bm);
// Test using SkFrontBufferedStream, as Android does
SkStream* bufferedStream = SkFrontBufferedStream::Create(new SkMemoryStream(fullData),
SkCodec::MinBufferedBytesNeeded());
REPORTER_ASSERT(r, bufferedStream);
codec.reset(SkCodec::NewFromStream(bufferedStream));
REPORTER_ASSERT(r, codec);
if (codec) {
test_info(r, codec.get(), info, SkCodec::kSuccess, &codecDigest);
}
}
// If we've just tested incomplete decodes, let's run the same test again on full decodes.
if (isIncomplete) {
check(r, path, size, supportsScanlineDecoding, supportsSubsetDecoding, false);
}
}
static void check(skiatest::Reporter* r,
const char path[],
SkISize size,
bool supportsScanlineDecoding,
bool supportsSubsetDecoding,
bool supports565 = true) {
SkAutoTDelete<SkStream> stream(resource(path));
if (!stream) {
SkDebugf("Missing resource '%s'\n", path);
return;
}
SkAutoTDelete<SkCodec> codec(SkCodec::NewFromStream(stream.detach()));
if (!codec) {
ERRORF(r, "Unable to decode '%s'", path);
return;
}
// This test is used primarily to verify rewinding works properly. Using kN32 allows
// us to test this without the added overhead of creating different bitmaps depending
// on the color type (ex: building a color table for kIndex8). DM is where we test
// decodes to all possible destination color types.
SkImageInfo info = codec->getInfo().makeColorType(kN32_SkColorType);
REPORTER_ASSERT(r, info.dimensions() == size);
{
// Test decoding to 565
SkImageInfo info565 = info.makeColorType(kRGB_565_SkColorType);
SkCodec::Result expected = (supports565 && info.alphaType() == kOpaque_SkAlphaType) ?
SkCodec::kSuccess : SkCodec::kInvalidConversion;
test_info(r, codec, info565, expected, NULL);
}
SkBitmap bm;
bm.allocPixels(info);
SkAutoLockPixels autoLockPixels(bm);
SkCodec::Result result =
codec->getPixels(info, bm.getPixels(), bm.rowBytes(), NULL, NULL, NULL);
REPORTER_ASSERT(r, result == SkCodec::kSuccess);
SkMD5::Digest digest;
md5(bm, &digest);
// verify that re-decoding gives the same result.
test_info(r, codec, info, SkCodec::kSuccess, &digest);
{
// Check alpha type conversions
if (info.alphaType() == kOpaque_SkAlphaType) {
test_info(r, codec, info.makeAlphaType(kUnpremul_SkAlphaType),
SkCodec::kInvalidConversion, NULL);
test_info(r, codec, info.makeAlphaType(kPremul_SkAlphaType),
SkCodec::kInvalidConversion, NULL);
} else {
// Decoding to opaque should fail
test_info(r, codec, info.makeAlphaType(kOpaque_SkAlphaType),
SkCodec::kInvalidConversion, NULL);
SkAlphaType otherAt = info.alphaType();
if (kPremul_SkAlphaType == otherAt) {
otherAt = kUnpremul_SkAlphaType;
} else {
otherAt = kPremul_SkAlphaType;
}
// The other non-opaque alpha type should always succeed, but not match.
test_info(r, codec, info.makeAlphaType(otherAt), SkCodec::kSuccess, NULL);
}
}
// Scanline decoding follows.
stream.reset(resource(path));
SkAutoTDelete<SkScanlineDecoder> scanlineDecoder(
SkScanlineDecoder::NewFromStream(stream.detach()));
if (supportsScanlineDecoding) {
bm.eraseColor(SK_ColorYELLOW);
REPORTER_ASSERT(r, scanlineDecoder);
REPORTER_ASSERT(r, scanlineDecoder->start(info) == SkCodec::kSuccess);
for (int y = 0; y < info.height(); y++) {
result = scanlineDecoder->getScanlines(bm.getAddr(0, y), 1, 0);
REPORTER_ASSERT(r, result == SkCodec::kSuccess);
}
// verify that scanline decoding gives the same result.
compare_to_good_digest(r, digest, bm);
} else {
REPORTER_ASSERT(r, !scanlineDecoder);
}
// The rest of this function tests decoding subsets, and will decode an arbitrary number of
// random subsets.
// Do not attempt to decode subsets of an image of only once pixel, since there is no
// meaningful subset.
if (size.width() * size.height() == 1) {
return;
}
SkRandom rand;
SkIRect subset;
SkCodec::Options opts;
opts.fSubset = ⊂
for (int i = 0; i < 5; i++) {
subset = generate_random_subset(&rand, size.width(), size.height());
SkASSERT(!subset.isEmpty());
const bool supported = codec->getValidSubset(&subset);
REPORTER_ASSERT(r, supported == supportsSubsetDecoding);
SkImageInfo subsetInfo = info.makeWH(subset.width(), subset.height());
SkBitmap bm;
bm.allocPixels(subsetInfo);
const SkCodec::Result result = codec->getPixels(bm.info(), bm.getPixels(), bm.rowBytes(),
&opts, NULL, NULL);
if (supportsSubsetDecoding) {
REPORTER_ASSERT(r, result == SkCodec::kSuccess);
// Webp is the only codec that supports subsets, and it will have modified the subset
// to have even left/top.
REPORTER_ASSERT(r, SkIsAlign2(subset.fLeft) && SkIsAlign2(subset.fTop));
} else {
// No subsets will work.
REPORTER_ASSERT(r, result == SkCodec::kUnimplemented);
}
}
}
