static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
struct v4l2_subdev_format *fmt)
{
struct m5mols_info *info = to_m5mols(sd);
struct v4l2_mbus_framefmt *format = &fmt->format;
struct v4l2_mbus_framefmt *sfmt;
enum m5mols_restype type;
u32 resolution = 0;
int ret;
ret = __find_resolution(sd, format, &type, &resolution);
if (ret < 0)
return ret;
sfmt = __find_format(info, fh, fmt->which, type);
if (!sfmt)
return 0;
format->code = m5mols_default_ffmt[type].code;
format->colorspace = V4L2_COLORSPACE_JPEG;
format->field = V4L2_FIELD_NONE;
if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
*sfmt = *format;
info->resolution = resolution;
info->res_type = type;
}
return 0;
}
static int m5mols_log_status(struct v4l2_subdev *sd)
{
struct m5mols_info *info = to_m5mols(sd);
v4l2_ctrl_handler_log_status(&info->handle, sd->name);
return 0;
}
static irqreturn_t m5mols_irq_handler(int irq, void *data)
{
struct m5mols_info *info = to_m5mols(data);
atomic_set(&info->irq_done, 1);
wake_up_interruptible(&info->irq_waitq);
return IRQ_HANDLED;
}
static irqreturn_t m5mols_irq_handler(int irq, void *data)
{
struct v4l2_subdev *sd = data;
struct m5mols_info *info = to_m5mols(sd);
schedule_work(&info->work_irq);
return IRQ_HANDLED;
}
/**
* m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts
*
* Before writing desired interrupt value the INT_FACTOR register should
* be read to clear pending interrupts.
*/
int m5mols_enable_interrupt(struct v4l2_subdev *sd, u8 reg)
{
struct m5mols_info *info = to_m5mols(sd);
u8 mask = is_available_af(info) ? REG_INT_AF : 0;
u8 dummy;
int ret;
ret = m5mols_read_u8(sd, SYSTEM_INT_FACTOR, &dummy);
if (!ret)
ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
return ret;
}
int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout)
{
struct m5mols_info *info = to_m5mols(sd);
int ret = wait_event_interruptible_timeout(info->irq_waitq,
atomic_add_unless(&info->irq_done, -1, 0),
msecs_to_jiffies(timeout));
if (ret <= 0)
return ret ? ret : -ETIMEDOUT;
return m5mols_busy_wait(sd, SYSTEM_INT_FACTOR, irq_mask,
M5MOLS_I2C_RDY_WAIT_FL | irq_mask, -1);
}
static void m5mols_show_version(struct v4l2_subdev *sd)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct device *dev = &client->dev;
struct m5mols_info *info = to_m5mols(sd);
dev_info(dev, "customer code\t0x%02x\n", info->ver.ctm_code);
dev_info(dev, "project code\t0x%02x\n", info->ver.pj_code);
dev_info(dev, "firmware version\t0x%04x\n", info->ver.fw);
dev_info(dev, "hardware version\t0x%04x\n", info->ver.hw);
dev_info(dev, "parameter version\t0x%04x\n", info->ver.parm);
dev_info(dev, "AWB version\t0x%04x\n", info->ver.awb);
}
static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
struct v4l2_subdev_format *fmt)
{
struct m5mols_info *info = to_m5mols(sd);
struct v4l2_mbus_framefmt *format;
format = __find_format(info, fh, fmt->which, info->res_type);
if (!format)
return -EINVAL;
fmt->format = *format;
return 0;
}
static int __devexit m5mols_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct m5mols_info *info = to_m5mols(sd);
v4l2_device_unregister_subdev(sd);
free_irq(info->pdata->irq, sd);
regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
gpio_free(info->pdata->gpio_reset);
media_entity_cleanup(&sd->entity);
kfree(info);
return 0;
}
static int m5mols_g_parm(struct v4l2_subdev *sd, struct v4l2_streamparm *parms)
{
struct m5mols_info *info = to_m5mols(sd);
struct v4l2_captureparm *cp = &parms->parm.capture;
if (parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE &&
parms->type != V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE)
return -EINVAL;
cp->capability = V4L2_CAP_TIMEPERFRAME;
cp->timeperframe = info->tpf;
return 0;
}
/**
* m5mols_get_version - retrieve full revisions information of M-5MOLS
*
* The version information includes revisions of hardware and firmware,
* AutoFocus alghorithm version and the version string.
*/
static int m5mols_get_version(struct v4l2_subdev *sd)
{
struct m5mols_info *info = to_m5mols(sd);
struct m5mols_version *ver = &info->ver;
u8 *str = ver->str;
int i;
int ret;
ret = m5mols_read_u8(sd, SYSTEM_VER_CUSTOMER, &ver->customer);
if (!ret)
ret = m5mols_read_u8(sd, SYSTEM_VER_PROJECT, &ver->project);
if (!ret)
ret = m5mols_read_u16(sd, SYSTEM_VER_FIRMWARE, &ver->fw);
if (!ret)
ret = m5mols_read_u16(sd, SYSTEM_VER_HARDWARE, &ver->hw);
if (!ret)
ret = m5mols_read_u16(sd, SYSTEM_VER_PARAMETER, &ver->param);
if (!ret)
ret = m5mols_read_u16(sd, SYSTEM_VER_AWB, &ver->awb);
if (!ret)
ret = m5mols_read_u8(sd, AF_VERSION, &ver->af);
if (ret)
return ret;
for (i = 0; i < VERSION_STRING_SIZE; i++) {
ret = m5mols_read_u8(sd, SYSTEM_VER_STRING, &str[i]);
if (ret)
return ret;
}
ver->fw = be16_to_cpu(ver->fw);
ver->hw = be16_to_cpu(ver->hw);
ver->param = be16_to_cpu(ver->param);
ver->awb = be16_to_cpu(ver->awb);
v4l2_info(sd, "Manufacturer\t[%s]\n",
is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
"Samsung Electro-Machanics" :
is_manufacturer(info, REG_SAMSUNG_OPTICS) ?
"Samsung Fiber-Optics" :
is_manufacturer(info, REG_SAMSUNG_TECHWIN) ?
"Samsung Techwin" : "None");
v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n",
info->ver.customer, info->ver.project);
if (!is_available_af(info))
v4l2_info(sd, "No support Auto Focus on this firmware\n");
return ret;
}
static int m5mols_into_capture(struct v4l2_subdev *sd, int res_size)
{
struct m5mols_info *info = to_m5mols(sd);
u32 reg;
int ret, timeout = 1;
u32 temp = 0;
info->captured = false;
/*
* The sequence of preparing Capture mode.
* 1. Clear Interrupt bit (for dummy)
* 2. Enable Capture bit at Interrupt
* 3. Lock AE/AWB
* 4. Enter Still Capture mode
*/
ret = m5mols_set_mode(sd, MODE_MONITOR);
if (!ret)
/* FIXME: setting capture exposure at the middle of a amount. */
ret = i2c_w16_ae(sd, CAT3_MANUAL_GAIN_CAP, 0x90);
if (!ret)
ret = m5mols_set_ae_lock(info, true);
if (!ret)
ret = m5mols_set_awb_lock(info, true);
if (!ret)
ret = i2c_r8_system(sd, CAT0_INT_FACTOR, ®);
if (!ret)
ret = i2c_w8_system(sd, CAT0_INT_ENABLE, 1 << INT_BIT_CAPTURE);
if (!ret)
ret = m5mols_set_mode(sd, MODE_CAPTURE);
if (!ret)
timeout = wait_event_interruptible_timeout(info->cap_wait,
info->captured, msecs_to_jiffies(2000));
/* disable all interrupt & clear interrupt */
ret = i2c_w8_system(sd, CAT0_INT_ENABLE, 0x0);
if (!ret)
ret = i2c_r8_system(sd, CAT0_INT_FACTOR, ®);
if (ret)
return -EPERM;
/* If all timeout exhausted, return error. */
if (!timeout)
return -ETIMEDOUT;
ret = i2c_r32_capt_ctrl(sd, CATC_CAP_IMAGE_SIZE, &temp);
info->captured = false;
return ret;
}
static int m5mols_g_mbus_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *ffmt)
{
struct m5mols_info *info = to_m5mols(sd);
enum m5mols_res_type res_type;
res_type = to_res_type(sd, ffmt->code);
if (res_type == M5MOLS_RES_MAX)
return -EINVAL;
*ffmt = info->fmt[res_type];
info->code = ffmt->code;
return 0;
}
static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
struct m5mols_info *info = to_m5mols(sd);
int ret;
info->mode_save = info->mode;
ret = m5mols_mode(info, REG_PARAMETER);
if (!ret)
ret = m5mols_set_ctrl(ctrl);
if (!ret)
ret = m5mols_mode(info, info->mode_save);
return ret;
}
static int m5mols_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
struct m5mols_info *info = to_m5mols(sd);
int ret = 0;
switch (ctrl->id) {
case V4L2_CID_CAM_JPEG_ENCODEDSIZE:
ctrl->cur.val = info->cap.total;
break;
default:
ret = -EINVAL;
break;
}
return ret;
}
static int m5mols_s_power(struct v4l2_subdev *sd, int on)
{
struct m5mols_info *info = to_m5mols(sd);
int ret;
if (on) {
ret = m5mols_sensor_power(info, true);
if (!ret)
ret = m5mols_sensor_armboot(sd);
if (!ret)
ret = m5mols_setup_default(sd);
} else {
ret = m5mols_sensor_power(info, false);
}
return ret;
}
static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
{
struct m5mols_info *info = to_m5mols(sd);
if (enable) {
int ret = -EINVAL;
if (is_code(info->code, M5MOLS_RESTYPE_MONITOR))
ret = m5mols_start_monitor(info);
if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE))
ret = m5mols_start_capture(info);
return ret;
}
return m5mols_mode(info, REG_PARAMETER);
}
/**
* m5mols_read - I2C read function
* @reg: combination of size, category and command for the I2C packet
* @size: desired size of I2C packet
* @val: read value
*
* Returns 0 on success, or else negative errno.
*/
static int m5mols_read(struct v4l2_subdev *sd, u32 size, u32 reg, u32 *val)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct m5mols_info *info = to_m5mols(sd);
u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
u8 category = I2C_CATEGORY(reg);
u8 cmd = I2C_COMMAND(reg);
struct i2c_msg msg[2];
u8 wbuf[5];
int ret;
if (!client->adapter)
return -ENODEV;
msg[0].addr = client->addr;
msg[0].flags = 0;
msg[0].len = 5;
msg[0].buf = wbuf;
wbuf[0] = 5;
wbuf[1] = M5MOLS_BYTE_READ;
wbuf[2] = category;
wbuf[3] = cmd;
wbuf[4] = size;
msg[1].addr = client->addr;
msg[1].flags = I2C_M_RD;
msg[1].len = size + 1;
msg[1].buf = rbuf;
/* minimum stabilization time */
usleep_range(200, 200);
ret = i2c_transfer(client->adapter, msg, 2);
if (ret == 2) {
*val = m5mols_swap_byte(&rbuf[1], size);
return 0;
}
if (info->isp_ready)
v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n",
size, category, cmd, ret);
return ret < 0 ? ret : -EIO;
}
static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
struct v4l2_subdev_format *fmt)
{
struct m5mols_info *info = to_m5mols(sd);
struct v4l2_mbus_framefmt *format;
int ret = 0;
mutex_lock(&info->lock);
format = __find_format(info, fh, fmt->which, info->res_type);
if (format)
fmt->format = *format;
else
ret = -EINVAL;
mutex_unlock(&info->lock);
return ret;
}
/**
* m5mols_write - I2C command write function
* @reg: combination of size, category and command for the I2C packet
* @val: value to write
*
* Returns 0 on success, or else negative errno.
*/
int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct m5mols_info *info = to_m5mols(sd);
u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4];
u8 category = I2C_CATEGORY(reg);
u8 cmd = I2C_COMMAND(reg);
u8 size = I2C_SIZE(reg);
u32 *buf = (u32 *)&wbuf[4];
struct i2c_msg msg[1];
int ret;
if (!client->adapter)
return -ENODEV;
if (size != 1 && size != 2 && size != 4) {
v4l2_err(sd, "Wrong data size\n");
return -EINVAL;
}
msg->addr = client->addr;
msg->flags = 0;
msg->len = (u16)size + 4;
msg->buf = wbuf;
wbuf[0] = size + 4;
wbuf[1] = M5MOLS_BYTE_WRITE;
wbuf[2] = category;
wbuf[3] = cmd;
*buf = m5mols_swap_byte((u8 *)&val, size);
usleep_range(200, 200);
ret = i2c_transfer(client->adapter, msg, 1);
if (ret == 1)
return 0;
if (info->isp_ready)
v4l2_err(sd, "write failed: cat:%02x cmd:%02x ret:%d\n",
category, cmd, ret);
return ret < 0 ? ret : -EIO;
}
/**
* m5mols_s_power - Main sensor power control function
*
* To prevent breaking the lens when the sensor is powered off the Soft-Landing
* algorithm is called where available. The Soft-Landing algorithm availability
* dependends on the firmware provider.
*/
static int m5mols_s_power(struct v4l2_subdev *sd, int on)
{
struct m5mols_info *info = to_m5mols(sd);
int ret;
if (on) {
ret = m5mols_sensor_power(info, true);
if (!ret)
ret = m5mols_sensor_armboot(sd);
if (!ret)
ret = m5mols_init_controls(info);
if (ret)
return ret;
info->ffmt[M5MOLS_RESTYPE_MONITOR] =
m5mols_default_ffmt[M5MOLS_RESTYPE_MONITOR];
info->ffmt[M5MOLS_RESTYPE_CAPTURE] =
m5mols_default_ffmt[M5MOLS_RESTYPE_CAPTURE];
return ret;
}
if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) {
ret = m5mols_mode(info, REG_MONITOR);
if (!ret)
ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP);
if (!ret)
ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF);
if (!ret)
ret = m5mols_busy(sd, CAT_SYSTEM, CAT0_STATUS,
REG_AF_IDLE);
if (!ret)
v4l2_info(sd, "Success soft-landing lens\n");
}
ret = m5mols_sensor_power(info, false);
if (!ret) {
v4l2_ctrl_handler_free(&info->handle);
info->ctrl_sync = false;
}
return ret;
}
static int m5mols_set_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
struct v4l2_mbus_frame_desc *fd)
{
struct m5mols_info *info = to_m5mols(sd);
struct v4l2_mbus_framefmt *mf = &info->ffmt[M5MOLS_RESTYPE_CAPTURE];
if (pad != 0 || fd == NULL)
return -EINVAL;
fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
fd->num_entries = 1;
fd->entry[0].length = clamp_t(u32, fd->entry[0].length,
mf->width * mf->height,
M5MOLS_MAIN_JPEG_SIZE_MAX);
mutex_lock(&info->lock);
info->cap.buf_size = fd->entry[0].length;
mutex_unlock(&info->lock);
return 0;
}
static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
{
struct m5mols_info *info = to_m5mols(sd);
if (enable) {
if (info->code == to_code(M5MOLS_RES_MON)) {
v4l2_info(sd, "%s : monitor mode\n", __func__);
return m5mols_start_monitor(sd);
}
if (info->code == to_code(M5MOLS_RES_CAPTURE)) {
v4l2_info(sd, "%s : capture mode\n", __func__);
return m5mols_start_capture(sd);
}
return -EINVAL;
} else {
if (is_streaming(sd))
return m5mols_set_mode(sd, MODE_PARMSET);
return -EINVAL;
}
}
/*
* get_res_preset - find out M5MOLS register value from requested resolution.
*
* @width: requested width
* @height: requested height
* @type: requested type of each modes. It supports only monitor mode now.
*/
static int get_res_preset(struct v4l2_subdev *sd, u16 width, u16 height,
enum m5mols_res_type type)
{
struct m5mols_info *info = to_m5mols(sd);
int i;
for (i = 0; i < ARRAY_SIZE(m5mols_resolutions); i++) {
if ((m5mols_resolutions[i].type == type) &&
(m5mols_resolutions[i].width == width) &&
(m5mols_resolutions[i].height == height))
break;
}
if (i >= ARRAY_SIZE(m5mols_resolutions)) {
v4l2msg("no matching resolution\n");
return -EINVAL;
}
return m5mols_resolutions[i].value;
}
static int m5mols_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
struct v4l2_mbus_frame_desc *fd)
{
struct m5mols_info *info = to_m5mols(sd);
if (pad != 0 || fd == NULL)
return -EINVAL;
mutex_lock(&info->lock);
/*
* .get_frame_desc is only used for compressed formats,
* thus we always return the capture frame parameters here.
*/
fd->entry[0].length = info->cap.buf_size;
fd->entry[0].pixelcode = info->ffmt[M5MOLS_RESTYPE_CAPTURE].code;
mutex_unlock(&info->lock);
fd->entry[0].flags = V4L2_MBUS_FRAME_DESC_FL_LEN_MAX;
fd->num_entries = 1;
return 0;
}
static int m5mols_s_mbus_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *ffmt)
{
struct m5mols_info *info = to_m5mols(sd);
enum m5mols_res_type res_type;
int size;
int ret = -EINVAL;
res_type = to_res_type(sd, ffmt->code);
if (res_type == M5MOLS_RES_MAX)
return -EINVAL;
/* If user set portrait for preview, it is substitued width width height
* unless get_res_preset will fail that M5MOLS did not support
* reverse WVGA */
if (ffmt->width < ffmt->height) {
int temp;
temp = ffmt->width;
ffmt->width = ffmt->height;
ffmt->height = temp;
}
size = get_res_preset(sd, ffmt->width, ffmt->height, res_type);
if (size < 0)
return -EINVAL;
if (ffmt->code == m5mols_formats[M5MOLS_RES_MON].code)
ret = m5mols_into_monitor(sd, size);
else
ret = m5mols_into_capture(sd, 0);
info->fmt[res_type] = default_fmt[res_type];
info->fmt[res_type].width = ffmt->width;
info->fmt[res_type].height = ffmt->height;
*ffmt = info->fmt[res_type];
info->code = ffmt->code;
return ret;
}
static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
{
struct m5mols_info *info = to_m5mols(sd);
u32 code;
int ret;
mutex_lock(&info->lock);
code = info->ffmt[info->res_type].code;
if (enable) {
if (is_code(code, M5MOLS_RESTYPE_MONITOR))
ret = m5mols_start_monitor(info);
if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
ret = m5mols_start_capture(info);
else
ret = -EINVAL;
} else {
ret = m5mols_set_mode(info, REG_PARAMETER);
}
mutex_unlock(&info->lock);
return ret;
}
/*
* get_version - get M5MOLS sensor versions.
*/
static int get_version(struct v4l2_subdev *sd)
{
struct m5mols_info *info = to_m5mols(sd);
union {
struct m5mols_version ver;
u8 bytes[10];
} value;
int ret, i;
for (i = CAT0_CUSTOMER_CODE; i <= CAT0_VERSION_AWB_L; i++) {
ret = i2c_r8_system(sd, i, (u32 *)&value.bytes[i]);
if (ret)
return ret;
}
info->ver = value.ver;
info->ver.fw = be16_to_cpu(info->ver.fw);
info->ver.hw = be16_to_cpu(info->ver.hw);
info->ver.parm = be16_to_cpu(info->ver.parm);
info->ver.awb = be16_to_cpu(info->ver.awb);
return ret;
}
static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
struct m5mols_info *info = to_m5mols(sd);
int ispstate = info->mode;
int ret;
/*
* If needed, defer restoring the controls until
* the device is fully initialized.
*/
if (!info->isp_ready) {
info->ctrl_sync = 0;
return 0;
}
ret = m5mols_mode(info, REG_PARAMETER);
if (ret < 0)
return ret;
ret = m5mols_set_ctrl(ctrl);
if (ret < 0)
return ret;
return m5mols_mode(info, ispstate);
}
/* TODO: not verified. */
static int m5mols_start_capture(struct v4l2_subdev *sd)
{
struct m5mols_info *info = to_m5mols(sd);
u32 reg, size;
int ret, timeout;
u8 reg_capt_fmt[] = {
0x10, /* JPEG with header + Thumbnail JPEG(YUV422@QVGA) */
}; /* YUV422, JPEG(422), JPEG(420) */
info->captured = false;
size = get_res_preset(sd,
info->fmt[M5MOLS_RES_CAPTURE].width,
info->fmt[M5MOLS_RES_CAPTURE].height,
M5MOLS_RES_CAPTURE);
if (size < 0)
return -EINVAL;
ret = 0;
/*
* The sequence of Starting Capture mode.
* 1. Select capture Single or Multi
* 2. Select format (YUV422, JPEG(YUV420, YUV422))
* 3. Set image size preset of Capture
* 4. Read Interrupt bit (for dummy)
* 5. Enable Capture bit at Interrupt
* 6. Start Capture
* 7. Check interrupt and register value
* 8. Get Image & Thumb size
*/
ret = i2c_w8_capt_ctrl(sd, CATC_CAP_SEL_FRAME, true); /* single capture */
if (!ret)
ret = i2c_w8_capt_parm(sd, CATB_YUVOUT_MAIN, reg_capt_fmt[0]);
if (!ret)
ret = i2c_w8_capt_parm(sd, CATB_MAIN_IMAGE_SIZE, size);
if (!ret)
ret = i2c_r8_system(sd, CAT0_INT_FACTOR, ®);
if (!ret)
ret = i2c_w8_system(sd, CAT0_INT_ENABLE, 1 << INT_BIT_CAPTURE);
if (!ret)
ret = i2c_w8_capt_ctrl(sd, CATC_CAP_START, true);
if (!ret) {
timeout = wait_event_interruptible_timeout(info->cap_wait,
info->captured, msecs_to_jiffies(2000));
if (info->captured) {
ret = m5mols_get_info_capture(sd);
if (!ret)
v4l2_subdev_notify(sd, info->cap.total, NULL);
else
return ret;
}
/* disable all interrupt & clear interrupt */
ret = i2c_w8_system(sd, CAT0_INT_ENABLE, 0x0);
if (!ret)
ret = i2c_r8_system(sd, CAT0_INT_FACTOR, ®);
if (ret)
return -EPERM;
/* If all timeout exhausted, return error. */
if (!timeout)
return -ETIMEDOUT;
info->captured = false;
ret = 0;
}
/* TODO: complete capture. */
return ret;
}
