/**
* cpuidle_idle_call - the main idle loop
*
* NOTE: no locks or semaphores should be used here
* return non-zero on failure
*/
int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_driver *drv = cpuidle_get_driver();
struct cpuidle_state *target_state;
int next_state, entered_state;
if (off)
return -ENODEV;
if (!initialized)
return -ENODEV;
/* check if the device is ready */
if (!dev || !dev->enabled)
return -EBUSY;
#if 0
/* shows regressions, re-enable for 2.6.29 */
/*
* run any timers that can be run now, at this point
* before calculating the idle duration etc.
*/
hrtimer_peek_ahead_timers();
#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(drv, dev);
if (need_resched()) {
local_irq_enable();
return 0;
}
target_state = &drv->states[next_state];
trace_power_start(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle(next_state, dev->cpu);
entered_state = target_state->enter(dev, drv, next_state);
trace_power_end(dev->cpu);
trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
if (entered_state >= 0) {
/* Update cpuidle counters */
/* This can be moved to within driver enter routine
* but that results in multiple copies of same code.
*/
dev->states_usage[entered_state].time +=
(unsigned long long)dev->last_residency;
dev->states_usage[entered_state].usage++;
}
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev, entered_state);
return 0;
}
/**
* cpuidle_idle_call - the main idle loop
*
* NOTE: no locks or semaphores should be used here
*/
static void cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_state *target_state;
int next_state;
/* check if the device is ready */
if (!dev || !dev->enabled) {
if (pm_idle_old)
pm_idle_old();
else
#if defined(CONFIG_ARCH_HAS_DEFAULT_IDLE)
default_idle();
#else
local_irq_enable();
#endif
return;
}
#if 0
/* shows regressions, re-enable for 2.6.29 */
/*
* run any timers that can be run now, at this point
* before calculating the idle duration etc.
*/
hrtimer_peek_ahead_timers();
#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched()) {
local_irq_enable();
return;
}
target_state = &dev->states[next_state];
/* enter the state and update stats */
dev->last_state = target_state;
trace_power_start(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle(next_state, dev->cpu);
dev->last_residency = target_state->enter(dev, target_state);
trace_power_end(dev->cpu);
trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
if (dev->last_state)
target_state = dev->last_state;
target_state->time += (unsigned long long)dev->last_residency;
target_state->usage++;
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev);
}
/**
* cpuidle_idle_call - the main idle loop
*
* NOTE: no locks or semaphores should be used here
* return non-zero on failure
*/
int cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __this_cpu_read(cpuidle_devices);
struct cpuidle_state *target_state;
int next_state;
if (off)
return -ENODEV;
if (!initialized)
return -ENODEV;
/* check if the device is ready */
if (!dev || !dev->enabled)
return -EBUSY;
#if 0
/* shows regressions, re-enable for 2.6.29 */
/*
* run any timers that can be run now, at this point
* before calculating the idle duration etc.
*/
hrtimer_peek_ahead_timers();
#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched()) {
local_irq_enable();
return 0;
}
target_state = &dev->states[next_state];
/* enter the state and update stats */
dev->last_state = target_state;
RCU_NONIDLE(
trace_power_start(POWER_CSTATE, next_state, dev->cpu);
trace_cpu_idle(next_state, dev->cpu)
);
dev->last_residency = target_state->enter(dev, target_state);
RCU_NONIDLE(
trace_power_end(dev->cpu);
trace_cpu_idle(PWR_EVENT_EXIT, dev->cpu);
);
/**
* cpuidle_idle_call - the main idle loop
*
* NOTE: no locks or semaphores should be used here
*/
static void cpuidle_idle_call(void)
{
struct cpuidle_device *dev = __get_cpu_var(cpuidle_devices);
struct cpuidle_state *target_state;
int next_state;
/* check if the device is ready */
if (!dev || !dev->enabled) {
if (pm_idle_old)
pm_idle_old();
else
#if defined(CONFIG_ARCH_HAS_DEFAULT_IDLE)
default_idle();
#else
local_irq_enable();
#endif
return;
}
#if 0
/* shows regressions, re-enable for 2.6.29 */
/*
* run any timers that can be run now, at this point
* before calculating the idle duration etc.
*/
hrtimer_peek_ahead_timers();
#endif
/*
* Call the device's prepare function before calling the
* governor's select function. ->prepare gives the device's
* cpuidle driver a chance to update any dynamic information
* of its cpuidle states for the current idle period, e.g.
* state availability, latencies, residencies, etc.
*/
if (dev->prepare)
dev->prepare(dev);
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
if (need_resched()) {
local_irq_enable();
return;
}
target_state = &dev->states[next_state];
/* enter the state and update stats */
dev->last_state = target_state;
dev->last_residency = target_state->enter(dev, target_state);
if (dev->last_state)
target_state = dev->last_state;
target_state->time += (unsigned long long)dev->last_residency;
target_state->usage++;
/* give the governor an opportunity to reflect on the outcome */
if (cpuidle_curr_governor->reflect)
cpuidle_curr_governor->reflect(dev);
trace_power_end(0);
}
