Exemplo n.º 1
0
// Initialise the codec
MastCodec_MPA::MastCodec_MPA( MastMimeType *type)
	: MastCodec(type)
{

	// Set default values
	this->samplerate = MPA_DEFAULT_SAMPLERATE;
	this->channels = MPA_DEFAULT_CHANNELS;


	// Initialise twolame
	this->twolame = twolame_init();
	if (this->twolame==NULL) {
		MAST_FATAL( "Failed to initialise TwoLame" );
	}

	// Configure twolame
	if (twolame_set_num_channels( this->twolame, this->channels )) {
		MAST_WARNING( "Failed to set number of input channels" );
	}
	if (twolame_set_in_samplerate( this->twolame, this->samplerate )) {
		MAST_WARNING( "Failed to set number of input samplerate" );
	}
	
	
	// Apply MIME type parameters to the codec
	this->apply_mime_type_params( type );

	
	// Get TwoLAME ready to go...
	twolame_init_params( this->twolame );

}
Exemplo n.º 2
0
static bool
twolame_encoder_setup(struct twolame_encoder *encoder, GError **error)
{
	if (encoder->quality >= -1.0) {
		/* a quality was configured (VBR) */

		if (0 != twolame_set_VBR(encoder->options, true)) {
			g_set_error(error, twolame_encoder_quark(), 0,
				    "error setting twolame VBR mode");
			return false;
		}
		if (0 != twolame_set_VBR_q(encoder->options, encoder->quality)) {
			g_set_error(error, twolame_encoder_quark(), 0,
				    "error setting twolame VBR quality");
			return false;
		}
	} else {
		/* a bit rate was configured */

		if (0 != twolame_set_brate(encoder->options, encoder->bitrate)) {
			g_set_error(error, twolame_encoder_quark(), 0,
				    "error setting twolame bitrate");
			return false;
		}
	}

	if (0 != twolame_set_num_channels(encoder->options,
					  encoder->audio_format.channels)) {
		g_set_error(error, twolame_encoder_quark(), 0,
			    "error setting twolame num channels");
		return false;
	}

	if (0 != twolame_set_in_samplerate(encoder->options,
					   encoder->audio_format.sample_rate)) {
		g_set_error(error, twolame_encoder_quark(), 0,
			    "error setting twolame sample rate");
		return false;
	}

	if (0 > twolame_init_params(encoder->options)) {
		g_set_error(error, twolame_encoder_quark(), 0,
			    "error initializing twolame params");
		return false;
	}

	return true;
}
/**
    \fn initialize

*/
bool AUDMEncoder_Twolame::initialize(void)
{
  int ret;
  TWOLAME_MPEG_mode mmode;
  uint32_t frequence;
  int channels=wavheader.channels;

  _twolameOptions = twolame_init();
  if (_twolameOptions == NULL)
    return 0;

  if(channels>2)
  {
    printf("[TwoLame]Too many channels\n");
    return 0;
  }
  wavheader.byterate=(_config.bitrate*1000)>>3;


  _chunk = 1152*channels;


  printf("[TwoLame]Incoming :fq : %"PRIu32", channel : %"PRIu32" bitrate: %"PRIu32" \n",
        wavheader.frequency,channels,_config.bitrate);


  twolame_set_in_samplerate(OPTIONS, wavheader.frequency);
  twolame_set_out_samplerate (OPTIONS, wavheader.frequency);
  twolame_set_num_channels(OPTIONS, channels);
  if(channels==1) mmode=TWOLAME_MONO;
  else
      mmode = TWOLAME_STEREO;
  twolame_set_mode(OPTIONS,mmode);
  twolame_set_error_protection(OPTIONS,TRUE);
    	//toolame_setPadding (options,TRUE);
  twolame_set_bitrate (OPTIONS,_config.bitrate);
  twolame_set_verbosity(OPTIONS, 2);
  if(twolame_init_params(OPTIONS))
  {
    printf("[TwoLame]Twolame init failed\n");
    return false;
  }
  printf("[TwoLame]Libtoolame successfully initialized\n");
  return true;
}
Exemplo n.º 4
0
static gboolean
gst_two_lame_get_default_settings (void)
{
    twolame_options *glopts = NULL;

    glopts = twolame_init ();
    if (glopts == NULL) {
        GST_ERROR ("Couldn't initialize TwoLAME");
        return FALSE;
    }

    twolame_set_num_channels (glopts, 2);
    twolame_set_in_samplerate (glopts, 44100);

    if (twolame_init_params (glopts) != 0) {
        GST_ERROR ("Couldn't set default parameters");
        return FALSE;
    }

    gst_two_lame_default_settings.mode = TWOLAME_JOINT_STEREO;    /* twolame_get_mode (glopts); */
    gst_two_lame_default_settings.psymodel = twolame_get_psymodel (glopts);
    gst_two_lame_default_settings.bitrate = twolame_get_bitrate (glopts);
    gst_two_lame_default_settings.padding = twolame_get_padding (glopts);
    gst_two_lame_default_settings.energy_level_extension =
        twolame_get_energy_levels (glopts);
    gst_two_lame_default_settings.emphasis = twolame_get_emphasis (glopts);
    gst_two_lame_default_settings.error_protection =
        twolame_get_error_protection (glopts);
    gst_two_lame_default_settings.copyright = twolame_get_copyright (glopts);
    gst_two_lame_default_settings.original = twolame_get_original (glopts);
    gst_two_lame_default_settings.vbr = twolame_get_VBR (glopts);
    gst_two_lame_default_settings.vbr_level = twolame_get_VBR_level (glopts);
    gst_two_lame_default_settings.ath_level = twolame_get_ATH_level (glopts);
    gst_two_lame_default_settings.vbr_max_bitrate =
        twolame_get_VBR_max_bitrate_kbps (glopts);
    gst_two_lame_default_settings.quick_mode = twolame_get_quick_mode (glopts);
    gst_two_lame_default_settings.quick_mode_count =
        twolame_get_quick_count (glopts);

    twolame_close (&glopts);

    return TRUE;
}
Exemplo n.º 5
0
int ExportMP2::Export(AudacityProject *project,
   int channels, const wxString &fName,
   bool selectionOnly, double t0, double t1, MixerSpec *mixerSpec, const Tags *metadata,
   int WXUNUSED(subformat))
{
   bool stereo = (channels == 2);
   long bitrate = gPrefs->Read(wxT("/FileFormats/MP2Bitrate"), 160);
   double rate = project->GetRate();
   const TrackList *tracks = project->GetTracks();

   wxLogNull logNo;             /* temporarily disable wxWidgets error messages */

   twolame_options *encodeOptions;
   encodeOptions = twolame_init();

   twolame_set_in_samplerate(encodeOptions, (int)(rate + 0.5));
   twolame_set_out_samplerate(encodeOptions, (int)(rate + 0.5));
   twolame_set_bitrate(encodeOptions, bitrate);
   twolame_set_num_channels(encodeOptions, stereo ? 2 : 1);

   if (twolame_init_params(encodeOptions) != 0)
   {
      wxMessageBox(_("Cannot export MP2 with this sample rate and bit rate"),
         _("Error"), wxICON_STOP);
      twolame_close(&encodeOptions);
      return false;
   }

   // Put ID3 tags at beginning of file
   if (metadata == NULL)
      metadata = project->GetTags();

   FileIO outFile(fName, FileIO::Output);
   if (!outFile.IsOpened()) {
      wxMessageBox(_("Unable to open target file for writing"));
      twolame_close(&encodeOptions);
      return false;
   }

   char *id3buffer = NULL;
   int id3len;
   bool endOfFile;
   id3len = AddTags(project, &id3buffer, &endOfFile, metadata);
   if (id3len && !endOfFile)
      outFile.Write(id3buffer, id3len);

   // Values taken from the twolame simple encoder sample
   const int pcmBufferSize = 9216 / 2; // number of samples
   const int mp2BufferSize = 16384; // bytes

   // We allocate a buffer which is twice as big as the
   // input buffer, which should always be enough.
   // We have to multiply by 4 because one sample is 2 bytes wide!
   unsigned char* mp2Buffer = new unsigned char[mp2BufferSize];

   const WaveTrackConstArray waveTracks =
      tracks->GetWaveTrackConstArray(selectionOnly, false);
   int updateResult = eProgressSuccess;
   {
      auto mixer = CreateMixer(waveTracks,
         tracks->GetTimeTrack(),
         t0, t1,
         stereo ? 2 : 1, pcmBufferSize, true,
         rate, int16Sample, true, mixerSpec);

      ProgressDialog progress(wxFileName(fName).GetName(),
         selectionOnly ?
         wxString::Format(_("Exporting selected audio at %ld kbps"), bitrate) :
         wxString::Format(_("Exporting entire file at %ld kbps"), bitrate));

      while (updateResult == eProgressSuccess) {
         sampleCount pcmNumSamples = mixer->Process(pcmBufferSize);

         if (pcmNumSamples == 0)
            break;

         short *pcmBuffer = (short *)mixer->GetBuffer();

         int mp2BufferNumBytes = twolame_encode_buffer_interleaved(
            encodeOptions,
            pcmBuffer,
            pcmNumSamples,
            mp2Buffer,
            mp2BufferSize);

         outFile.Write(mp2Buffer, mp2BufferNumBytes);

         updateResult = progress.Update(mixer->MixGetCurrentTime() - t0, t1 - t0);
      }
   }

   int mp2BufferNumBytes = twolame_encode_flush(
      encodeOptions,
      mp2Buffer,
      mp2BufferSize);

   if (mp2BufferNumBytes > 0)
      outFile.Write(mp2Buffer, mp2BufferNumBytes);

   twolame_close(&encodeOptions);

   delete[] mp2Buffer;

   /* Write ID3 tag if it was supposed to be at the end of the file */

   if (id3len && endOfFile)
      outFile.Write(id3buffer, id3len);

   if (id3buffer) {
   free(id3buffer);
   }

   /* Close file */

   outFile.Close();

   return updateResult;
}
Exemplo n.º 6
0
/* set up the encoder state */
static gboolean
gst_two_lame_setup (GstTwoLame * twolame)
{

#define CHECK_ERROR(command) G_STMT_START {\
  if ((command) < 0) { \
    GST_ERROR_OBJECT (twolame, "setup failed: " G_STRINGIFY (command)); \
    return FALSE; \
  } \
}G_STMT_END

    int retval;
    GstCaps *allowed_caps;

    GST_DEBUG_OBJECT (twolame, "starting setup");

    /* check if we're already setup; if we are, we might want to check
     * if this initialization is compatible with the previous one */
    /* FIXME: do this */
    if (twolame->setup) {
        GST_WARNING_OBJECT (twolame, "already setup");
        twolame->setup = FALSE;
    }

    twolame->glopts = twolame_init ();

    if (twolame->glopts == NULL)
        return FALSE;

    /* copy the parameters over */
    twolame_set_in_samplerate (twolame->glopts, twolame->samplerate);

    /* let twolame choose default samplerate unless outgoing sample rate is fixed */
    allowed_caps = gst_pad_get_allowed_caps (twolame->srcpad);

    if (allowed_caps != NULL) {
        GstStructure *structure;
        gint samplerate;

        structure = gst_caps_get_structure (allowed_caps, 0);

        if (gst_structure_get_int (structure, "rate", &samplerate)) {
            GST_DEBUG_OBJECT (twolame,
                              "Setting sample rate to %d as fixed in src caps", samplerate);
            twolame_set_out_samplerate (twolame->glopts, samplerate);
        } else {
            GST_DEBUG_OBJECT (twolame, "Letting twolame choose sample rate");
            twolame_set_out_samplerate (twolame->glopts, 0);
        }
        gst_caps_unref (allowed_caps);
        allowed_caps = NULL;
    } else {
        GST_DEBUG_OBJECT (twolame,
                          "No peer yet, letting twolame choose sample rate");
        twolame_set_out_samplerate (twolame->glopts, 0);
    }

    /* force mono encoding if we only have one channel */
    if (twolame->num_channels == 1)
        twolame->mode = 3;

    /* Fix bitrates and MPEG version */

    CHECK_ERROR (twolame_set_num_channels (twolame->glopts,
                                           twolame->num_channels));

    CHECK_ERROR (twolame_set_mode (twolame->glopts, twolame->mode));
    CHECK_ERROR (twolame_set_psymodel (twolame->glopts, twolame->psymodel));
    CHECK_AND_FIXUP_BITRATE (twolame, "bitrate", twolame->bitrate);
    CHECK_ERROR (twolame_set_bitrate (twolame->glopts, twolame->bitrate));
    CHECK_ERROR (twolame_set_padding (twolame->glopts, twolame->padding));
    CHECK_ERROR (twolame_set_energy_levels (twolame->glopts,
                                            twolame->energy_level_extension));
    CHECK_ERROR (twolame_set_emphasis (twolame->glopts, twolame->emphasis));
    CHECK_ERROR (twolame_set_error_protection (twolame->glopts,
                 twolame->error_protection));
    CHECK_ERROR (twolame_set_copyright (twolame->glopts, twolame->copyright));
    CHECK_ERROR (twolame_set_original (twolame->glopts, twolame->original));
    CHECK_ERROR (twolame_set_VBR (twolame->glopts, twolame->vbr));
    CHECK_ERROR (twolame_set_VBR_level (twolame->glopts, twolame->vbr_level));
    CHECK_ERROR (twolame_set_ATH_level (twolame->glopts, twolame->ath_level));
    CHECK_AND_FIXUP_BITRATE (twolame, "vbr-max-bitrate",
                             twolame->vbr_max_bitrate);
    CHECK_ERROR (twolame_set_VBR_max_bitrate_kbps (twolame->glopts,
                 twolame->vbr_max_bitrate));
    CHECK_ERROR (twolame_set_quick_mode (twolame->glopts, twolame->quick_mode));
    CHECK_ERROR (twolame_set_quick_count (twolame->glopts,
                                          twolame->quick_mode_count));

    /* initialize the twolame encoder */
    if ((retval = twolame_init_params (twolame->glopts)) >= 0) {
        twolame->setup = TRUE;
        /* FIXME: it would be nice to print out the mode here */
        GST_INFO ("twolame encoder setup (%d kbit/s, %d Hz, %d channels)",
                  twolame->bitrate, twolame->samplerate, twolame->num_channels);
    } else {
        GST_ERROR_OBJECT (twolame, "twolame_init_params returned %d", retval);
    }

    GST_DEBUG_OBJECT (twolame, "done with setup");

    return twolame->setup;
#undef CHECK_ERROR
}
Exemplo n.º 7
0
int
main(int argc, char **argv)
{
    twolame_options *encopts = NULL;
    SNDFILE         *inputfile = NULL;
    FILE            *outputfile = NULL;
    short int       *pcmaudio = NULL;
    int             samples_read = 0;
    unsigned int    frame_count = 0;
    unsigned char   *mp2buffer = NULL;
    int             mp2fill_size = 0;
    int             audioReadSize = 0;


    // Allocate memory for the PCM audio data
    if ((pcmaudio = (short int *) calloc(AUDIOBUFSIZE, sizeof(short int))) == NULL) {
        fprintf(stderr, "Error: pcmaudio memory allocation failed\n");
        exit(ERR_MEM_ALLOC);
    }
    
    // Allocate memory for the encoded MP2 audio data
    if ((mp2buffer = (unsigned char *) calloc(MP2BUFSIZE, sizeof(unsigned char))) == NULL) {
        fprintf(stderr, "Error: mp2buffer memory allocation failed\n");
        exit(ERR_MEM_ALLOC);
    }
    
    // Initialise Encoder Options Structure 
    encopts = twolame_init();
    if (encopts == NULL) {
        fprintf(stderr, "Error: initializing libtwolame encoder failed.\n");
        exit(ERR_MEM_ALLOC);
    }

    
    // Get options and parameters from the command line
    parse_args(argc, argv, encopts);


    // Open the input file
    inputfile = open_input_file( inputfilename );
    twolame_set_num_channels( encopts, sfinfo.channels );
    twolame_set_in_samplerate( encopts, sfinfo.samplerate );
        
    // Open the output file
    outputfile = open_output_file( outputfilename );
    
    // display file settings
	print_file_config( inputfile, twolame_get_verbosity(encopts) );

    // initialise twolame with this set of options
    if (twolame_init_params( encopts ) != 0) {
        fprintf(stderr, "Error: configuring libtwolame encoder failed.\n");
        exit(ERR_INVALID_PARAM);
    }

    // display encoder settings
	twolame_print_config( encopts );


	// Only encode a single frame of mpeg audio ?
    if (single_frame_mode) audioReadSize = 1152;
    else audioReadSize = AUDIOBUFSIZE;


    // Now do the reading/encoding/writing
    while ((samples_read = sf_read_short( inputfile, pcmaudio, audioReadSize )) > 0) {
        int bytes_out = 0;
        
        // Force byte swapping if requested
        if (byteswap) {
			int i;
			for (i = 0; i<samples_read; i++) {
				short tmp = pcmaudio[i];
				char *src = (char*)&tmp;
				char *dst = (char*)&pcmaudio[i];
				dst[0] = src[1];
				dst[1] = src[0];
			}
        }

		// Calculate the number of samples we have (per channel)
        samples_read /= sfinfo.channels;

        // Do swapping of left and right channels if requested
        if (channelswap && sfinfo.channels == 2) {
        	int i;
        	for(i=0; i<samples_read; i++) {
        		short tmp = pcmaudio[(2*i)];
        		pcmaudio[(2*i)] = pcmaudio[(2*i)+1];
        		pcmaudio[(2*i)+1] = tmp;
        	}
        }
        
        // Encode the audio to MP2
        mp2fill_size = twolame_encode_buffer_interleaved( encopts, pcmaudio, samples_read, mp2buffer, MP2BUFSIZE);
        
        // Stop if we don't have any bytes (probably don't have enough audio for a full frame of mpeg audio)
        if (mp2fill_size==0) break;
        if (mp2fill_size<0) {
            fprintf(stderr,"error while encoding audio: %d\n", mp2fill_size);
            exit(ERR_WRITING_OUTPUT);
        }

        // Write the encoded audio out
        bytes_out = fwrite(mp2buffer, sizeof(unsigned char), mp2fill_size, outputfile);
        if (bytes_out<=0) {
            perror("error while writing to output file");
            exit(ERR_WRITING_OUTPUT);
        }
        
        // Only single frame ?
        if (single_frame_mode) break;
        
        // Display Progress
        frame_count += (samples_read / 1152);
        if (twolame_get_verbosity(encopts)>0) {
        	fprintf(stderr, "[%04i", frame_count);
        	//fprintf(stderr, "/%04i", (int)(sfinfo.frames / sfinfo.channels  / 1152));
        	fprintf(stderr, "]\r");
        	fflush(stderr);
        }
    }

    //
    // flush any remaining audio. (don't send any new audio data) There
    // should only ever be a max of 1 frame on a flush. There may be zero
    // frames if the audio data was an exact multiple of 1152
    //
    mp2fill_size = twolame_encode_flush( encopts, mp2buffer, MP2BUFSIZE);
    if (mp2fill_size>0) {
        int bytes_out = fwrite(mp2buffer, sizeof(unsigned char), mp2fill_size, outputfile);
        if (bytes_out<=0) {
            perror("error while writing to output file");
            exit(ERR_WRITING_OUTPUT);
        }
    }
    
 	if (twolame_get_verbosity(encopts)>1) {
	    fprintf(stderr, "\nEncoding Finished.\n");
	}

    // Close input and output files
    sf_close( inputfile );
    fclose( outputfile );

	// Close the libtwolame encoder
    twolame_close(&encopts);
    
    
	// Free up memory
	free(pcmaudio);
	free(mp2buffer);


	
    return (ERR_NO_ERROR);
}
Exemplo n.º 8
0
static int OpenEncoder( vlc_object_t *p_this )
{
    encoder_t *p_enc = (encoder_t *)p_this;
    encoder_sys_t *p_sys;
    int i_frequency;

    if( p_enc->fmt_out.i_codec != VLC_CODEC_MP2 &&
        p_enc->fmt_out.i_codec != VLC_CODEC_MPGA &&
        p_enc->fmt_out.i_codec != VLC_FOURCC( 'm', 'p', '2', 'a' ) &&
        !p_enc->obj.force )
    {
        return VLC_EGENERIC;
    }

    if( p_enc->fmt_in.audio.i_channels > 2 )
    {
        msg_Err( p_enc, "doesn't support > 2 channels" );
        return VLC_EGENERIC;
    }

    for ( i_frequency = 0; i_frequency < 6; i_frequency++ )
    {
        if ( p_enc->fmt_out.audio.i_rate == mpa_freq_tab[i_frequency] )
            break;
    }
    if ( i_frequency == 6 )
    {
        msg_Err( p_enc, "MPEG audio doesn't support frequency=%d",
                 p_enc->fmt_out.audio.i_rate );
        return VLC_EGENERIC;
    }

    /* Allocate the memory needed to store the decoder's structure */
    if( ( p_sys = (encoder_sys_t *)malloc(sizeof(encoder_sys_t)) ) == NULL )
        return VLC_ENOMEM;
    p_enc->p_sys = p_sys;

    p_enc->fmt_in.i_codec = VLC_CODEC_S16N;

    p_enc->fmt_out.i_cat = AUDIO_ES;
    p_enc->fmt_out.i_codec = VLC_CODEC_MPGA;

    config_ChainParse( p_enc, ENC_CFG_PREFIX, ppsz_enc_options, p_enc->p_cfg );

    p_sys->p_twolame = twolame_init();

    /* Set options */
    twolame_set_in_samplerate( p_sys->p_twolame, p_enc->fmt_out.audio.i_rate );
    twolame_set_out_samplerate( p_sys->p_twolame, p_enc->fmt_out.audio.i_rate );

    if( var_GetBool( p_enc, ENC_CFG_PREFIX "vbr" ) )
    {
        float f_quality = var_GetFloat( p_enc, ENC_CFG_PREFIX "quality" );
        if ( f_quality > 50.f ) f_quality = 50.f;
        if ( f_quality < 0.f ) f_quality = 0.f;
        twolame_set_VBR( p_sys->p_twolame, 1 );
        twolame_set_VBR_q( p_sys->p_twolame, f_quality );
    }
    else
    {
        int i;
        for ( i = 1; i < 14; i++ )
        {
            if ( p_enc->fmt_out.i_bitrate / 1000
                  <= mpa_bitrate_tab[i_frequency / 3][i] )
                break;
        }
        if ( p_enc->fmt_out.i_bitrate / 1000
              != mpa_bitrate_tab[i_frequency / 3][i] )
        {
            msg_Warn( p_enc, "MPEG audio doesn't support bitrate=%d, using %d",
                      p_enc->fmt_out.i_bitrate,
                      mpa_bitrate_tab[i_frequency / 3][i] * 1000 );
            p_enc->fmt_out.i_bitrate = mpa_bitrate_tab[i_frequency / 3][i]
                                        * 1000;
        }

        twolame_set_bitrate( p_sys->p_twolame,
                             p_enc->fmt_out.i_bitrate / 1000 );
    }

    if ( p_enc->fmt_in.audio.i_channels == 1 )
    {
        twolame_set_num_channels( p_sys->p_twolame, 1 );
        twolame_set_mode( p_sys->p_twolame, TWOLAME_MONO );
    }
    else
    {
        twolame_set_num_channels( p_sys->p_twolame, 2 );
        switch( var_GetInteger( p_enc, ENC_CFG_PREFIX "mode" ) )
        {
        case 1:
            twolame_set_mode( p_sys->p_twolame, TWOLAME_DUAL_CHANNEL );
            break;
        case 2:
            twolame_set_mode( p_sys->p_twolame, TWOLAME_JOINT_STEREO );
            break;
        case 0:
        default:
            twolame_set_mode( p_sys->p_twolame, TWOLAME_STEREO );
            break;
        }
    }

    twolame_set_psymodel( p_sys->p_twolame,
                          var_GetInteger( p_enc, ENC_CFG_PREFIX "psy" ) );

    if ( twolame_init_params( p_sys->p_twolame ) )
    {
        msg_Err( p_enc, "twolame initialization failed" );
        return -VLC_EGENERIC;
    }

    p_enc->pf_encode_audio = Encode;

    p_sys->i_nb_samples = 0;

    return VLC_SUCCESS;
}
Exemplo n.º 9
0
bool MpegL2Codec::startCodec()
{
#ifdef HAVE_TWOLAME

  //
  // Load Library
  //
  if((twolame_handle=dlopen("libtwolame.so.0",RTLD_LAZY))==NULL) {
    Log(LOG_ERR,"unsupported audio format (library not found)");
    return false;
  }
  *(void **)(&twolame_init)=dlsym(twolame_handle,"twolame_init");
  *(void **)(&twolame_set_mode)=dlsym(twolame_handle,"twolame_set_mode");
  *(void **)(&twolame_set_num_channels)=
    dlsym(twolame_handle,"twolame_set_num_channels");
  *(void **)(&twolame_set_in_samplerate)=
    dlsym(twolame_handle,"twolame_set_in_samplerate");
  *(void **)(&twolame_set_out_samplerate)=
    dlsym(twolame_handle,"twolame_set_out_samplerate");
  *(void **)(&twolame_set_bitrate)=
    dlsym(twolame_handle,"twolame_set_bitrate");
  *(void **)(&twolame_init_params)=
    dlsym(twolame_handle,"twolame_init_params");
  *(void **)(&twolame_close)=dlsym(twolame_handle,"twolame_close");
  *(void **)(&twolame_encode_buffer_interleaved)=
    dlsym(twolame_handle,"twolame_encode_buffer_interleaved");
  *(void **)(&twolame_encode_buffer_float32_interleaved)=
    dlsym(twolame_handle,"twolame_encode_buffer_float32_interleaved");
  *(void **)(&twolame_encode_flush)=
    dlsym(twolame_handle,"twolame_encode_flush");
  *(void **)(&twolame_set_energy_levels)=
    dlsym(twolame_handle,"twolame_set_energy_levels");
  *(void **)(&twolame_set_VBR)=dlsym(twolame_handle,"twolame_set_VBR");
  *(void **)(&twolame_set_VBR_level)=
    dlsym(twolame_handle,"twolame_set_VBR_level");

  //
  // Initialize Encoder Instance
  //
  TWOLAME_MPEG_mode mpeg_mode=TWOLAME_STEREO;

  switch(channels()) {
  case 1:
    mpeg_mode=TWOLAME_MONO;
    break;

  case 2:
    mpeg_mode=TWOLAME_STEREO;    
    break;
  }
  if((twolame_lameopts=twolame_init())==NULL) {
    Log(LOG_ERR,"unable to initialize MP2 encoder");
    return false;
  }
  twolame_set_mode(twolame_lameopts,mpeg_mode);
  twolame_set_num_channels(twolame_lameopts,channels());
  twolame_set_in_samplerate(twolame_lameopts,streamSamplerate());
  twolame_set_out_samplerate(twolame_lameopts,streamSamplerate());
  if(bitrate()==0) {
    twolame_set_VBR(twolame_lameopts,TRUE);
    twolame_set_VBR_level(twolame_lameopts,(int)(20.0*quality()-10.0));
  }
  else {
    twolame_set_bitrate(twolame_lameopts,bitrate());
  }
  twolame_set_energy_levels(twolame_lameopts,1);
  if(twolame_init_params(twolame_lameopts)!=0) {
    Log(LOG_ERR,"unable to start MP2 encoder");
    return false;
  }
  return true;
#else
  Log(LOG_ERR,"unsupported audio format (no build support)");
  return false;
#endif  // HAVE_TWOLAME
}
//________________________________________________
//   Init lame encoder
// frequence    : Impose frequency , 0 means reuse the incoming fq
// mode                         : ADM_STEREO etc...
// bitrate              : Bitrate in kbps (96,192...)
// return 0 : init failed
//                              1 : init succeeded
//_______________________________________________
uint8_t AUDMEncoder_Twolame::init(ADM_audioEncoderDescriptor *config)
{
  int ret;
  TWOLAME_MPEG_mode mmode;    	
  uint32_t frequence;
  TWOLAME_encoderParam *lameConf=(TWOLAME_encoderParam *)config->param;
  ADM_assert(config->paramSize==sizeof(TWOLAME_encoderParam));

  _twolameOptions = twolame_init();
  if (_twolameOptions == NULL)
    return 0;
      
  if(_wavheader->channels>2)
  {
    printf("[TwoLame]Too many channels\n");
    return 0; 
  }
  _wavheader->byterate=(config->bitrate*1000)>>3;         
      
 
  _chunk = 1152*_wavheader->channels;

 
  printf("[TwoLame]Incoming :fq : %lu, channel : %lu bitrate: %lu \n",
        _wavheader->frequency,_wavheader->channels,config->bitrate);
		
 
  twolame_set_in_samplerate(OPTIONS, _wavheader->frequency);
  twolame_set_out_samplerate (OPTIONS, _wavheader->frequency);
  twolame_set_num_channels(OPTIONS, _wavheader->channels);
  if(_wavheader->channels==1) mmode=TWOLAME_MONO;
  else
    switch (lameConf->mode)
  {
    case ADM_STEREO:
      mmode = TWOLAME_STEREO;
      break;
    case ADM_JSTEREO:
      mmode = TWOLAME_JOINT_STEREO;
      break;
    case ADM_MONO:
      mmode=TWOLAME_MONO;
      break;
				
    default:
      printf("\n **** unknown mode, going stereo ***\n");
      mmode = TWOLAME_STEREO;
      break;

  }
  twolame_set_mode(OPTIONS,mmode);
  twolame_set_error_protection(OPTIONS,TRUE);	
    	//toolame_setPadding (options,TRUE);
  twolame_set_bitrate (OPTIONS,config->bitrate);
  twolame_set_verbosity(OPTIONS, 2);
  if(twolame_init_params(OPTIONS))
  {
    printf("[TwoLame]Twolame init failed\n");
    return 0;
  }
	
 

  printf("[TwoLame]Libtoolame successfully initialized\n");
  return 1;       
}
Exemplo n.º 11
0
int main(int argc, char **argv)
{
    twolame_options *encodeOptions;
    char *inputfilename = argv[1];
    char *outputfilename = argv[2];
    FILE *outfile, *fpSrc = NULL;
    short int *pcmaudio;
    unsigned char *mp2buffer;
    int num_samples = 0;
    int mp2fill_size = 0;
    int frames = 0;
    wave_info_t *wave_info = NULL;
		int nReadSize = 0;

    if (argc != 3)
        usage();


    /* Allocate some space for the PCM audio data */
    if ((pcmaudio = (short *) calloc(AUDIOBUFSIZE, sizeof(short))) == NULL) {
        fprintf(stderr, "pcmaudio alloc failed\n");
        exit(99);
    }

    /* Allocate some space for the encoded MP2 audio data */
    if ((mp2buffer = (unsigned char *) calloc(MP2BUFSIZE, sizeof(unsigned char))) == NULL) {
        fprintf(stderr, "mp2buffer alloc failed\n");
        exit(99);
    }




    /* grab a set of default encode options */
    encodeOptions = twolame_init();
    printf("Using libtwolame version %s.\n", get_twolame_version());


    /* Open the wave file */
    if ((wave_info = wave_init(inputfilename)) == NULL) {
        fprintf(stderr, "Not a recognised WAV file.\n");
        exit(99);
    }
    // Use sound file to over-ride preferences for
    // mono/stereo and sampling-frequency
    twolame_set_num_channels(encodeOptions, wave_info->channels);
    if (wave_info->channels == 1) {
        twolame_set_mode(encodeOptions, TWOLAME_MONO);
    } else {
        twolame_set_mode(encodeOptions, TWOLAME_STEREO);
    }


    /* Set the input and output sample rate to the same */
    twolame_set_in_samplerate(encodeOptions, wave_info->samplerate);
    twolame_set_out_samplerate(encodeOptions, wave_info->samplerate);

    /* Set the bitrate to 192 kbps */
    twolame_set_bitrate(encodeOptions, 64);

    /* initialise twolame with this set of options */
    if (twolame_init_params(encodeOptions) != 0) {
        fprintf(stderr, "Error: configuring libtwolame encoder failed.\n");
        exit(99);
    }

    /* Open the output file for the encoded MP2 data */
    if ((outfile = fopen(outputfilename, "wb")) == 0) {
        fprintf(stderr, "error opening output file %s\n", outputfilename);
        exit(99);
    }

    // Read num_samples of audio data *per channel* from the input file
    //while ((num_samples = wave_get_samples(wave_info, pcmaudio, AUDIOBUFSIZE/2)) != 0) {
	



	fpSrc = fopen( "a2002011001-e02.wav", "rb" );
	while(1)
	{
		num_samples = fread( pcmaudio, sizeof( char ), AUDIOBUFSIZE/2, fpSrc );
        // Encode the audio!2024*4

		if( num_samples != AUDIOBUFSIZE/2 )
			break;

		num_samples /= 2;

		mp2fill_size =
            twolame_encode_buffer_interleaved(encodeOptions, pcmaudio, num_samples/2, mp2buffer,
                                              MP2BUFSIZE);

        // Write the MPEG bitstream to the file
        fwrite(mp2buffer, sizeof(unsigned char), mp2fill_size, outfile);

        // Display the number of MPEG audio frames we have encoded
        frames += (num_samples / TWOLAME_SAMPLES_PER_FRAME);
        printf("[%04i]\r", frames);
        fflush(stdout);
    }

    /* flush any remaining audio. (don't send any new audio data) There should only ever be a max
       of 1 frame on a flush. There may be zero frames if the audio data was an exact multiple of
       1152 */
    mp2fill_size = twolame_encode_flush(encodeOptions, mp2buffer, MP2BUFSIZE);
    fwrite(mp2buffer, sizeof(unsigned char), mp2fill_size, outfile);


    twolame_close(&encodeOptions);
    free(pcmaudio);

    printf("\nFinished nicely.\n");


    return (0);
}
Exemplo n.º 12
0
int mpae_init_twolame(audio_encoder_t *encoder)
{
	int mode;
	mpae_twolame_ctx *ctx = NULL;
	
	if(encoder->params.channels == 1)
	{
		mp_msg(MSGT_MENCODER, MSGL_INFO, "ae_twolame, 1 audio channel, forcing mono mode\n");
		mode = TWOLAME_MONO;
	}
	else if(encoder->params.channels == 2)
	{
		if(! strcasecmp(param_mode, "dual"))
			mode = TWOLAME_DUAL_CHANNEL;
		else if(! strcasecmp(param_mode, "jstereo"))
			mode = TWOLAME_JOINT_STEREO;
		else if(! strcasecmp(param_mode, "stereo"))
			mode = TWOLAME_STEREO;
		else
		{
			mp_msg(MSGT_MENCODER, MSGL_ERR, "ae_twolame, unknown mode %s, exiting\n", param_mode);
		}
	}
	else
		mp_msg(MSGT_MENCODER, MSGL_ERR, "ae_twolame, Twolame can't encode > 2 channels, exiting\n");
	
	ctx = (mpae_twolame_ctx *) calloc(1, sizeof(mpae_twolame_ctx));
	if(ctx == NULL)
	{
		mp_msg(MSGT_MENCODER, MSGL_ERR, "ae_twolame, couldn't alloc a %d bytes context, exiting\n", sizeof(mpae_twolame_ctx));
		return 0;
	}
	
	ctx->twolame_ctx = twolame_init();
	if(ctx->twolame_ctx == NULL)
	{
		mp_msg(MSGT_MENCODER, MSGL_ERR, "ae_twolame, couldn't initial parameters from libtwolame, exiting\n");
		free(ctx);
		return 0;
	}
	ctx->vbr = 0;

	if(twolame_set_num_channels(ctx->twolame_ctx, encoder->params.channels) != 0)
		return 0;
	if(twolame_set_mode(ctx->twolame_ctx, mode) != 0)
		return 0;
		
	if(twolame_set_in_samplerate(ctx->twolame_ctx, encoder->params.sample_rate) != 0)
		return 0;
		
	if(twolame_set_out_samplerate(ctx->twolame_ctx, encoder->params.sample_rate) != 0)
		return 0;
	
	if(encoder->params.sample_rate < 32000)
		twolame_set_version(ctx->twolame_ctx, TWOLAME_MPEG2);
	else
		twolame_set_version(ctx->twolame_ctx, TWOLAME_MPEG1);
	
	if(twolame_set_psymodel(ctx->twolame_ctx, param_psy) != 0)
		return 0;
	
	if(twolame_set_bitrate(ctx->twolame_ctx, param_bitrate) != 0)
		return 0;
	
	if(param_errprot)
		if(twolame_set_error_protection(ctx->twolame_ctx, TRUE) != 0)
			return 0;
	
	if(param_vbr != 0)
	{
		if(twolame_set_VBR(ctx->twolame_ctx, TRUE) != 0)
			return 0;
		if(twolame_set_VBR_q(ctx->twolame_ctx, param_vbr) != 0)
			return 0;
		if(twolame_set_padding(ctx->twolame_ctx, FALSE) != 0)
			return 0;
		if(param_maxvbr)
		{
			if(twolame_set_VBR_max_bitrate_kbps(ctx->twolame_ctx, param_maxvbr) != 0)
				return 0;
		}
		ctx->vbr = 1;
	}
	
	if(twolame_set_verbosity(ctx->twolame_ctx, param_debug) != 0)
		return 0;
	
	if(twolame_init_params(ctx->twolame_ctx) != 0)
		return 0;
	
	encoder->params.bitrate = param_bitrate * 1000;
	encoder->params.samples_per_frame = 1152;
	encoder->priv = ctx;
	encoder->decode_buffer_size = 1152 * 2 * encoder->params.channels;
	
	encoder->bind = bind_twolame;
	encoder->get_frame_size = get_frame_size;
	encoder->encode = encode_twolame;
	encoder->close = close_twolame;
	
	return 1;
}
Exemplo n.º 13
0
int main(int argc, char **argv)
{
    twolame_options *encopts = NULL;
    audioin_t *inputfile = NULL;
    FILE *outputfile = NULL;
    short int *pcmaudio = NULL;
    unsigned int frame_count = 0;
    unsigned int total_frames = 0;
    unsigned int frame_len = 0;
    unsigned int total_bytes = 0;
    unsigned char *mp2buffer = NULL;
    int samples_read = 0;
    int mp2fill_size = 0;
    int audioReadSize = 0;


    // Allocate memory for the PCM audio data
    if ((pcmaudio = (short int *) calloc(AUDIO_BUF_SIZE, sizeof(short int))) == NULL) {
        fprintf(stderr, "Error: pcmaudio memory allocation failed\n");
        exit(ERR_MEM_ALLOC);
    }
    // Allocate memory for the encoded MP2 audio data
    if ((mp2buffer = (unsigned char *) calloc(MP2_BUF_SIZE, sizeof(unsigned char))) == NULL) {
        fprintf(stderr, "Error: mp2buffer memory allocation failed\n");
        exit(ERR_MEM_ALLOC);
    }
    // Initialise Encoder Options Structure
    encopts = twolame_init();
    if (encopts == NULL) {
        fprintf(stderr, "Error: initializing libtwolame encoder failed.\n");
        exit(ERR_MEM_ALLOC);
    }
    // Get options and parameters from the command line
    parse_args(argc, argv, encopts);

    // Display the filenames
    print_filenames(twolame_get_verbosity(encopts));

    // Open the input file
    if (use_raw) {
        // use raw input handler
        inputfile = open_audioin_raw(inputfilename, &sfinfo, sample_size);
    } else {
        // use libsndfile
        inputfile = open_audioin_sndfile(inputfilename, &sfinfo);
    }

    // Display input information
    if (twolame_get_verbosity(encopts) > 1) {
        inputfile->print_info(inputfile);
    }
    // Use information from input file to configure libtwolame
    twolame_set_num_channels(encopts, sfinfo.channels);
    twolame_set_in_samplerate(encopts, sfinfo.samplerate);


    // Open the output file
    outputfile = open_output_file(outputfilename);

    // initialise twolame with this set of options
    if (twolame_init_params(encopts) != 0) {
        fprintf(stderr, "Error: configuring libtwolame encoder failed.\n");
        exit(ERR_INVALID_PARAM);
    }
    // display encoder settings
    twolame_print_config(encopts);


    // Only encode a single frame of mpeg audio ?
    if (single_frame_mode)
        audioReadSize = TWOLAME_SAMPLES_PER_FRAME;
    else
        audioReadSize = AUDIO_BUF_SIZE;

    // Calculate the size and number of frames we are going to encode
    frame_len = twolame_get_framelength(encopts);
    if (sfinfo.frames)
        total_frames = sfinfo.frames / TWOLAME_SAMPLES_PER_FRAME;


    // Now do the reading/encoding/writing
    while ((samples_read = inputfile->read(inputfile, pcmaudio, audioReadSize)) > 0) {
        int bytes_out = 0;

        // Force byte swapping if requested
        if (byteswap) {
            int i;
            for (i = 0; i < samples_read; i++) {
                short tmp = pcmaudio[i];
                char *src = (char *) &tmp;
                char *dst = (char *) &pcmaudio[i];
                dst[0] = src[1];
                dst[1] = src[0];
            }
        }
        // Calculate the number of samples we have (per channel)
        samples_read /= sfinfo.channels;

        // Do swapping of left and right channels if requested
        if (channelswap && sfinfo.channels == 2) {
            int i;
            for (i = 0; i < samples_read; i++) {
                short tmp = pcmaudio[(2 * i)];
                pcmaudio[(2 * i)] = pcmaudio[(2 * i) + 1];
                pcmaudio[(2 * i) + 1] = tmp;
            }
        }
        // Encode the audio to MP2
        mp2fill_size =
            twolame_encode_buffer_interleaved(encopts, pcmaudio, samples_read, mp2buffer,
                                              MP2_BUF_SIZE);

        // Stop if we don't have any bytes (probably don't have enough audio for a full frame of
        // mpeg audio)
        if (mp2fill_size == 0)
            break;
        if (mp2fill_size < 0) {
            fprintf(stderr, "error while encoding audio: %d\n", mp2fill_size);
            exit(ERR_ENCODING);
        }
        // Check that a whole number of frame was written
        // if (mp2fill_size % frame_len != 0) {
        // fprintf(stderr,"error while encoding audio: non-whole number of frames written\n");
        // exit(ERR_ENCODING);
        // }

        // Write the encoded audio out
        bytes_out = fwrite(mp2buffer, sizeof(unsigned char), mp2fill_size, outputfile);
        if (bytes_out != mp2fill_size) {
            perror("error while writing to output file");
            exit(ERR_WRITING_OUTPUT);
        }
        total_bytes += bytes_out;

        // Only single frame ?
        if (single_frame_mode)
            break;


        // Display Progress
        frame_count += (mp2fill_size / frame_len);
        if (twolame_get_verbosity(encopts) > 0) {
            fprintf(stderr, "\rEncoding frame: %i", frame_count);
            if (total_frames) {
                fprintf(stderr, "/%i (%i%%)", total_frames, (frame_count * 100) / total_frames);
            }
            fflush(stderr);
        }
    }

    // Was there an error reading the audio?
    if (inputfile->error_str(inputfile)) {
        fprintf(stderr, "Error reading from input file: %s\n", inputfile->error_str(inputfile));
    }
    //
    // flush any remaining audio. (don't send any new audio data) There
    // should only ever be a max of 1 frame on a flush. There may be zero
    // frames if the audio data was an exact multiple of 1152
    //
    mp2fill_size = twolame_encode_flush(encopts, mp2buffer, MP2_BUF_SIZE);
    if (mp2fill_size > 0) {
        int bytes_out = fwrite(mp2buffer, sizeof(unsigned char), mp2fill_size, outputfile);
        frame_count++;
        if (bytes_out <= 0) {
            perror("error while writing to output file");
            exit(ERR_WRITING_OUTPUT);
        }
        total_bytes += bytes_out;
    }

    if (twolame_get_verbosity(encopts) > 1) {
        char *filesize = format_filesize_string(total_bytes);
        fprintf(stderr, "\nEncoding Finished.\n");
        fprintf(stderr, "Total bytes written: %s.\n", filesize);
        free(filesize);
    }
    // Close input and output streams
    inputfile->close(inputfile);
    fclose(outputfile);

    // Close the libtwolame encoder
    twolame_close(&encopts);


    // Free up memory
    free(pcmaudio);
    free(mp2buffer);

    return (ERR_NO_ERROR);
}