// update table Head !!
void HeadedTable::setSortedCol(int col)
{
{
int old_sorted = sorted_col;
sorted_col = col;
// printf("old_sorted=%d\n",old_sorted);
// printf("sorted_col=%d\n",sorted_col);
if (old_sorted != -1 && old_sorted < ncols) // ncols bug
updateHeading(old_sorted);
if (col != -1 && col < ncols)
updateHeading(col);
}
}
// repaint cells that have been changed from previous generation
void Pstable::repaint_changed()
{
int rows = procview->procs.size();
int cols = procview->cats.size();
int left = leftCell(), right = lastColVisible();
int top = topCell(), bottom = lastRowVisible();
if(right >= cols) right = cols - 1;
if(bottom >= rows) bottom = rows - 1;
int far_right = right;
if(leftmostchanged != -1 && right >= leftmostchanged)
right = leftmostchanged - 1;
for(int c = right + 1; c <= far_right; c++)
updateHeading(c);
for(int r = top; r <= bottom; r++) {
for(int c = left; c <= right; c++) {
Category *cat = procview->cats[c];
Procinfo *p = procview->procs[r], *op = 0;
if(r >= procview->old_procs.size()
|| (op = procview->old_procs[r], cat->compare(p, op) != 0)
|| p->selected != op->selected) {
updateCell(r, c);
}
}
// update all cells that have moved or changed width
for(int c = right + 1; c <= far_right; c++)
updateCell(r, c);
}
if(leftmostchanged != -1)
clearRight();
}
task gyroTask() {
initGyro();
while(true) {
updateHeading();
angle2 = angle;
}
}
void MSTableColumn::heading(const MSStringVector& heading_)
{
if (heading()!=heading_)
{
_heading=heading_;
updateHeading();
}
}
void MSTableColumn::headingFont(Font fid_)
{
if (headingFont()!=fid_)
{
_headingFont=fid_;
updateHeading();
}
}
QmvItem * QmvList::itemCopy()
{
if ( !editor->shuttleClass())
return(0);
QmvItem *ci;
if (currentItem())
ci = (QmvItem *)currentItem();
else
ci = 0;
QmvItem *item = 0;
QmvClass *cls = editor->shuttleClass();
QString key = cls->userKey();
QmvTuple * oldtuple = ci->shuttleTuple();
// Add tuples in current set to the list,
// using primary key and descriptive label
int newrow = cls->newTuple();
if (newrow < 0)
return(0);
QmvTuple * newtuple = cls->tupleAt(newrow);
// Close the current item to reduce confusion
if (ci && ci->isOpen())
ci->setOpen(FALSE);
// Copy the editable attributes from the tuple of the current item
QmvAttList atlist = cls->edit_attlist();
for (QmvAttribute * at_ptr = atlist.first(); at_ptr != 0; at_ptr = atlist.next())
newtuple->update( *at_ptr->find("mtat_name"),
oldtuple->attributeValue(*at_ptr->find("mtat_name")));
// Create a new item with the newtuple.
item = new QmvItem(this, ci, newtuple, newtuple->userkeyValue());
item->setText( 0, newtuple->userkeyValue());
item->setText( 1, newtuple->userlabelValue());
item->setOpen(TRUE);
updateHeading();
return(item);
}
bool QmvList::itemRemove()
{
if ( !currentItem() || !editor->shuttleClass())
return(FALSE);
QmvItem *ci = (QmvItem *)currentItem();
if (ci->shuttletupleAttribute())
{
QMessageBox::warning( this, "Tuple:Remove",
tr("You cannot remove a row attribute, only whole rows.\n\n %1 : %2")
.arg(ci->text(0))
.arg(ci->text(1)),
"OK", 0);
return(FALSE);
}
QmvClass * cls = ci->shuttleClass();
QmvTuple * tp = ci->shuttleTuple();
switch( QMessageBox::information( this, "Tuple:Remove",
tr("Are you sure that you want to delete this item? \n\n %1 : %2")
.arg(ci->shuttleTuple()->userkeyValue())
.arg(ci->shuttleTuple()->userlabelValue()),
"Yes", "Cancel",
0, 1 ) )
{
case 0:
// Closing will remove the children.
ci->setOpen(FALSE);
delete ci;
cls->remove(tp, TRUE);
updateHeading();
break;
case 1:
default: // just for sanity
//ce->ignore();
break;
}
}
// repaint cells that have been changed due to configuration change
void Pstable::repaint_statically_changed(int update_col)
{
int rows = procview->procs.size();
int cols = procview->cats.size();
int right = lastColVisible(), left = right + 1;
int top = topCell(), bottom = lastRowVisible();
if(leftmostchanged == -1 || leftmostchanged > update_col)
leftmostchanged = update_col;
if(leftmostchanged != -1)
left = leftmostchanged;
if(right >= cols) right = cols - 1;
if(bottom >= rows) bottom = rows - 1;
for(int c = left; c <= right; c++)
updateHeading(c);
for(int r = top; r <= bottom; r++) {
for(int c = left; c <= right; c++)
updateCell(r, c);
}
if(leftmostchanged != -1)
clearRight();
}
QmvItem * QmvList::itemInsert()
{
if ( !editor->shuttleClass())
return(0);
QmvItem *ci;
if (currentItem())
ci = (QmvItem *)currentItem();
else
ci = 0;
QmvItem *item = 0;
QmvClass *cls = editor->shuttleClass();
QString key = cls->userKey();
// Add tuples in current set to the list,
// using primary key and descriptive label
int newrow = cls->newTuple();
if (newrow < 0)
return(0);
QmvTuple * newtuple = cls->tupleAt(newrow);
QString tmp = cls->relationTitle();
// Close the current item to reduce confusion
if (ci && ci->isOpen())
ci->setOpen(FALSE);
item = new QmvItem(this, ci, newtuple, newtuple->userkeyValue());
item->setText( 0, newtuple->userkeyValue());
item->setText( 1, newtuple->userlabelValue());
item->setOpen(TRUE);
updateHeading();
return(item);
}
int main ( void )
{
//TRISA = 0b0010000000000000;
TRISA = 0b00001111;
TRISAbits.TRISA12 = 0;
TRISCbits.TRISC1 = 0;
TRISCbits.TRISC2 = 0;
TRISCbits.TRISC3 = 0;
TRISCbits.TRISC4 = 0;
//TRISD = 0;
TRISD = 0b0000000000010000; // RD11: DIR2; RD8: PWM2
//TRISE = 0b00001000;
TRISE = 0b00001000; // RE6: DIR1; RE0: PWM1
TRISEbits.TRISE7 = 0;
//LCD an
_PCFG16 = 1; // AN16 is digital
_PCFG17 = 1; // AN17 is digital
_PCFG18 = 1; // AN18 is digital
_PCFG19 = 1; // AN19 is digital
_PCFG20 =1;
_PCFG31=1;
//pwm analog select
_PCFG24=1;
_PCFG30=1;
//RE4 for lcd r/s
_PCFG28=1;
TRISEbits.TRISE4 = 0;
AD1PCFGHbits.PCFG28 = 1;
AD1PCFGHbits.PCFG27 = 1;
AD1PCFGHbits.PCFG30 = 1;
AD1PCFGHbits.PCFG24 = 1;
AD1PCFGH = 0x0020;
TRISAbits.TRISA13 = 1;
//set pwm low
PWM1=0;
PWM2=0;
SYS_Initialize ( ) ;
CLKDIVbits.FRCDIV = 0;
CLKDIVbits.PLLPOST = 0; // N2 = 2
CLKDIVbits.PLLPRE = 0; // N1 = 2
PLLFBD = (Fosc*N1_default*N2_default/Ffrc) - M_default; // M = 8 -> Fosc = 7.3728 MHz * 8 / 2 / 2 = 16 MHz
while(!OSCCONbits.LOCK); // Wait for PLL to lock
RCONbits.SWDTEN = 0; // Disable Watch Dog Timer
//TRISF = 0;
gpsLock = 0;
lcd_init();
print_lcd("Initializing");
//delay_ms(500);
//lcd_clear();
/*lcd test
char line1[] = " On Route ";
char line2[] = " Arrived ";
//send_command_byte(0xFF);
//while(1){send_command_byte(0xFF);send_data_byte(0);}
// delay_ms(2);
//send_command_byte(0x02); // Go to start of line 1
//send_command_byte(0b00001111); // Display: display on, cursor on, blink on
//send_command_byte(0b00000110); // Set entry mode: ID=1, S=0
//send_command_byte(0b00000001); // Clear display
print_lcd(line1);
delay_ms(5000);
lcd_clear();
print_lcd(line2);
//send_command_byte(0xC0); // Go to start of line 1
//while(1){send_command_byte(0b00000001);}
while(1);*/
/*int a;
long long int ct;
int i;
int j=0;*/
//i2c init
//uart init
UART_Initialize();
delayMs(100);
/* while(1){//test for delay ms configuration
//PORTDbits.RD1 = 1;
//delayUs(10);
//for(i = 0;i <7;i++);
delayMs(10);
PORTDbits.RD12 = 1;
//for (i = 0; i < 1000; i++);
//PORTDbits.RD1 = 0;
//for(i = 0;i <7;i++);
delayMs(10);
PORTDbits.RD12 = 0;
//for (i = 0; i < 1000; i++);
}*/
//ultrasonic test
/* while(1){
long double x;
delayMs(500);
PORTEbits.RE4 = 1; //TRIGGER HIGH
PORTDbits.RD5 = 1;
delay_us(10); //10uS Delay
lcd_clear();
ultraSonicEn = 1;
ultraSonicCount = 0;
PORTEbits.RE4 = 0; //TRIGGER LOW
PORTDbits.RD5 = 0;
while (!PORTDbits.RD4); //Waiting for Echo
IEC0bits.T2IE = 1; //enable timer
while(PORTDbits.RD4);//
IEC0bits.T2IE = 0; //disable timer
x = ultraSonicCount/TICKS_PER_METER;
sprintf(outputBuf,"%lf",x);
print_lcd(outputBuf);
}*/
//TX_str(endGPS);
//delayMs(3000);
//TX_str(startGPS);
/*TX_str(startGPShot);
delayMs(2000);
while ( !gpsLock ) {
TX_str(getGPS);
delayMs(500);
}*/
//TCP code
TX_str(openNet);
delayMs(5000);
TX_str(openConnection);
delayMs(5000);
// while(!BUTTON_IsPressed ( BUTTON_S3 ));
//TX_str(sprintf("%s%d\r",sendTCP, strlen("10")));
sprintf(outputBuf2,"2\n%lf,%lf\n\r",roverLog,roverLat );
sprintf(cmdBuf,"%s%d\r", sendTCP,strlen(outputBuf2));
TX_str(cmdBuf);
delayMs(3000);
TX_str(outputBuf2);
while(!waypointsReady || !gpsLock);
//while(1);
delayMs(7000);
lcd_clear();
print_lcd("waypoints locked");
i2c_init();
//i2c_write3(0x3c, 0x00, 0x70);
i2c_write3(0x3c, 0x00, 0b00011000);
//i2c_write3(0x3c, 0x01, 0b11000000);
i2c_write3(0x3c, 0x01, 0xA0);
i2c_write3(0x3c, 0x02, 0x00);
//timer init, do this after other initializations
motorDuty=0;
tim1_init();
tim2_init();
/*
double angleTolerance = 8.0;
motorDuty=2;
while (1){ //adjust
double angleDiff = headingDiff(0,roverHeading );
if (angleDiff > 0 ||abs(angleDiff) > 175 ){ //turn left
PWM1_DIR = 0; //left NOTE: 0 is forward, 1 is reverse
PWM2_DIR = 1; //right
} else{ // turn right
PWM1_DIR = 1;
PWM2_DIR = 0;
}
if (abs(angleDiff) < angleTolerance){
motorDuty = 0;
//break;
}else{
//motorDuty =4;
motorDuty =2;
}
delayMs(13);
updateHeading();
}*/
//hardcoded gps for tcpip test
/*while(1){
// PORTDbits.RD5 = 1;
// for (a = 0; a < (100/33); a++) {}
// PORTDbits.RD5 = 0;
// for (a = 0; a < (100/33); a++) {}
ct = 0;
//TMR2 = 0;//Timer Starts
delayMs(60);
PORTEbits.RE4 = 1; //TRIGGER HIGH
PORTDbits.RD5 = 1;
delay_us(15);
//10uS Delay
PORTEbits.RE4 = 0; //TRIGGER LOW
PORTDbits.RD5 = 0;
while (!PORTDbits.RD4){ //Waiting for Echo
ct++;
}
//T2CONbits.TON = 1;
while(PORTDbits.RD4) {
ct++;
}// {
//T2CONbits.TON = 0;
sprintf(outputBuf,"%lld", ct);
//a = TMR2;
//a = a / 58.82;
//long int p;
//for(p = 0; p <100000; p++);
}*/
//tim1_init();
//while ( 1 );
//UART_Initialize();
/* Infinite Loop */
/*
long int i;
while ( 1 )
{//test for delay ms configuration
//PORTDbits.RD1 = 1;
delayMs(10);
PORTDbits.RD12 = 1;
//for (i = 0; i < 1000; i++);
//PORTDbits.RD1 = 0;
delayMs(10);
PORTDbits.RD12 = 0;
//for (i = 0; i < 1000; i++);
}*/
//IEC0bits.T1IE = 0;
//IEC0bits.T1IE = 1;
//motorDuty =2;
motorStopFlag = 0; //ready to go
char tempBuf1[50];
int wapointsVisited;
double desiredHeading = 0;
double dToWaypoint = 99999.9;
double angleTolerance = 6.0;
for (wapointsVisited =0; wapointsVisited<numGPSpoints;wapointsVisited++ )
{
dToWaypoint = 99999.9;
while (1)
{
int f;
roverLog = 0;
roverLat = 0;
for(f = 0; f < ROVER_LEN; f++){
roverLog+=roverlog[f]/ROVER_LEN_D;
roverLat+=roverlat[f]/ROVER_LEN_D;
}
dToWaypoint = dist(convertGPSToDeg(roverLat),convertGPSToDeg(roverLog),convertGPSToDeg(gpsLat[wapointsVisited]),convertGPSToDeg(gpsLonge[wapointsVisited]));
if(dToWaypoint <= 3.0){break;} //go to next waypoint
desiredHeading = 330.0;
desiredHeading = bearing(convertGPSToDeg(roverLat),convertGPSToDeg(roverLog),convertGPSToDeg(gpsLat[wapointsVisited]),convertGPSToDeg(gpsLonge[wapointsVisited]));
updateHeading();
if (!(abs(headingDiff(desiredHeading,roverHeading )) < angleTolerance))
{
motorDuty = 0; //stop
delayMs(300);
while (1) //ADJUSTMENT LOOP
{
double angleDiff = headingDiff(desiredHeading,roverHeading );
//double dist = ultraSonicPing();
/*sprintf(tempBuf1,"%f",dist);
lcd_clear();
print_lcd(tempBuf1);*/
if (abs(angleDiff) < angleTolerance){
motorDuty = 0;
/*sprintf(tempBuf1,"%f",roverHeading);
IEC0bits.T1IE = 0;
print_lcd(tempBuf1);
IEC0bits.T1IE = 1;*/
break;
}
if (angleDiff > 0 || abs(angleDiff) > 175 ){ //turn right
/*PORTDbits.RD4 = 1; //right 0 is forwards, 1 i backwards
PORTDbits.RD2 = 1;
PORTDbits.RD8 = 0; //left*/
PWM1_DIR = 0; //left NOTE: 0 is forward, 1 is reverse
PWM2_DIR = 1; //right
} else{ // turn left
/*PORTDbits.RD4 = 0; //right 0 is forwards, 1 i backwards
PORTDbits.RD2 = 0;
PORTDbits.RD8 = 1; //left*/
PWM1_DIR = 1;
PWM2_DIR = 0;
}
motorDuty =3;
delayMs(15);
updateHeading();
// sprintf(tempBuf1,"%f",roverHeading);
// IEC0bits.T1IE = 0;
// lcd_clear();
// print_lcd(tempBuf1);
// IEC0bits.T1IE = 1;
//delayMs(1000);
//for(p = 0; p <100000; p++);
}
}
PWM1_DIR = 0; //left NOTE: 0 is forward, 1 is reverse
PWM2_DIR = 0;
motorDuty = 5;
ultraSonicDelayEnable = 1;
//frequency is around 20kHz
while (ultraSonicDelayCount < 60000){ //for 4 seconds poll ultrasonic and check for obsticles
long double x;
//PORTEbits.RE4 = 1; //TRIGGER HIGH
PORTDbits.RD5 = 1;
delay_us(10); //10uS Delay
lcd_clear();
ultraSonicEn = 1;
ultraSonicCount = 0;
//PORTEbits.RE4 = 0; //TRIGGER LOW
PORTDbits.RD5 = 0;
while (!PORTDbits.RD4); //Waiting for Echo
IEC0bits.T2IE = 1; //enable timer
while(PORTDbits.RD4);//
IEC0bits.T2IE = 0; //disable timer
ultraSonicEn = 0;
x = ultraSonicCount/TICKS_PER_METER;
if (x <= 1.4){
motorDuty = 0;
}else{
motorDuty = 5;
}
delayMs(200);
}
ultraSonicDelayEnable = 0;
ultraSonicDelayCount = 0;
}
motorDuty = 0;
delayMs(1000);
//IEC0bits.T1IE = 0;
lcd_clear();
char buf3[40];
sprintf(buf3, "reached %d", wapointsVisited);
print_lcd(buf3);
delayMs(3000);
//IEC0bits.T1IE = 1;
}
//IEC0bits.T1IE = 0;
lcd_clear();
print_lcd("ARRIVED!!!");
//IEC0bits.T1IE = 1;
while (1);
}
/**
* Function: runMasterSM
* @return None.
* @remark Executes one cycle of the command center's state machine.
* @author David Goodman
* @date 2013.03.09 */
void runMasterSM() {
//Magnetometer_runSM();
// Record these button presses since we don't know
// if they will be pressed after runSM
lockPressed = isLockPressed();
zeroPressed = isZeroPressed();
if(lockPressed || zeroPressed){
#ifdef USE_ENCODERS
Encoder_runSM();
#endif
if(lockPressed) {
printf("Lock was pressed.\n");
#ifdef USE_NAVIGATION
#ifdef USE_ENCODERS
Encoder_enableZeroAngle();
Encoder_runSM();
Coordinate ned; // = Coordinate_new(ned, 0, 0 ,0);
if (Navigation_getProjectedCoordinate(&ned, Encoder_getYaw(),
Encoder_getPitch(), height)) {
printf("Desired coordinate -- N: %.6f, E: %.6f, D: %.2f (m)\n",
ned.x, ned.y, ned.z);
#ifdef USE_XBEE
Mavlink_send_start_rescue(XBEE_UART_ID, TRUE, 0,ned.x, ned.y);
#endif
}
else {
printf("Failed to obtain desired NED coordinate.\n");
}
Encoder_disableZeroAngle();
#else
printf("Navigation module is disabled.\n");
#endif
#endif
}
else if (zeroPressed) {
// Zero was pressed
#ifdef USE_ENCODERS
Encoder_setZeroAngle();
#endif
useLevel = TRUE;
#ifdef USE_MAGNETOMETER
Magnetometer_runSM();
heading = Magnetometer_getDegree();
updateHeading();
#endif
//printf("Zeroing...\n");
}
else {
}
}
if (!zeroPressed) {
if (useLevel)
printf("Done zeroing.\n");
useLevel = FALSE;
}
#ifdef USE_ACCELEROMETER
Accelerometer_runSM();
updateAccelerometerLEDs();
#endif
#ifdef USE_NAVIGATION
Navigation_runSM();
#endif
#ifdef USE_XBEE
Xbee_runSM();
#endif
}
void Player::update(){
updateHeading();
goodMind->update(goal);
//badMind->update(bad);
}
