/*
* WARNING - If a driver calls usb_reset_device, you should simulate a
* disconnect() and probe() for other interfaces you doesn't claim. This
* is left up to the driver writer right now. This insures other drivers
* have a chance to re-setup their interface.
*
* Take a look at proc_resetdevice in devio.c for some sample code to
* do this.
*/
int usb_reset_device(struct usb_device *dev)
{
struct usb_device *parent = dev->parent;
struct usb_device_descriptor descriptor;
int i, ret, port = -1;
DBG_HOST_HUB("### >>> Enter hub.c file --> usb_reset_device function \n");
if (!parent) {
err("attempting to reset root hub!");
return -EINVAL;
}
for (i = 0; i < parent->maxchild; i++)
if (parent->children[i] == dev) {
port = i;
break;
}
if (port < 0)
return -ENOENT;
down(&usb_address0_sem);
/* Send a reset to the device */
if (usb_hub_port_reset(parent, port, dev, HUB_SHORT_RESET_TIME)) {
usb_hub_port_disable(parent, port);
up(&usb_address0_sem);
return(-ENODEV);
}
/* Reprogram the Address */
ret = usb_set_address(dev);
if (ret < 0) {
err("USB device not accepting new address (error=%d)", ret);
usb_hub_port_disable(parent, port);
up(&usb_address0_sem);
return ret;
}
/* Let the SET_ADDRESS settle */
wait_ms(10);
up(&usb_address0_sem);
/*
* Now we fetch the configuration descriptors for the device and
* see if anything has changed. If it has, we dump the current
* parsed descriptors and reparse from scratch. Then we leave
* the device alone for the caller to finish setting up.
*
* If nothing changed, we reprogram the configuration and then
* the alternate settings.
*/
ret = usb_get_descriptor(dev, USB_DT_DEVICE, 0, &descriptor,
sizeof(descriptor));
if (ret < 0)
return ret;
le16_to_cpus(&descriptor.bcdUSB);
le16_to_cpus(&descriptor.idVendor);
le16_to_cpus(&descriptor.idProduct);
le16_to_cpus(&descriptor.bcdDevice);
if (memcmp(&dev->descriptor, &descriptor, sizeof(descriptor))) {
usb_destroy_configuration(dev);
ret = usb_get_device_descriptor(dev);
if (ret < sizeof(dev->descriptor)) {
if (ret < 0)
err("unable to get device descriptor (error=%d)", ret);
else
err("USB device descriptor short read (expected %Zi, got %i)", sizeof(dev->descriptor), ret);
clear_bit(dev->devnum, &dev->bus->devmap.devicemap);
dev->devnum = -1;
return -EIO;
}
ret = usb_get_configuration(dev);
if (ret < 0) {
err("unable to get configuration (error=%d)", ret);
usb_destroy_configuration(dev);
clear_bit(dev->devnum, &dev->bus->devmap.devicemap);
dev->devnum = -1;
return 1;
}
dev->actconfig = dev->config;
usb_set_maxpacket(dev);
return 1;
}
ret = usb_set_configuration(dev, dev->actconfig->bConfigurationValue);
if (ret < 0) {
err("failed to set active configuration (error=%d)", ret);
return ret;
}
for (i = 0; i < dev->actconfig->bNumInterfaces; i++) {
struct usb_interface *intf = &dev->actconfig->interface[i];
struct usb_interface_descriptor *as = &intf->altsetting[intf->act_altsetting];
ret = usb_set_interface(dev, as->bInterfaceNumber, as->bAlternateSetting);
if (ret < 0) {
err("failed to set active alternate setting for interface %d (error=%d)", i, ret);
return ret;
}
}
return 0;
}
int
main()
{
usb_set_maxpacket(2);
return 0;
}
