static int scpi_usbtmc_libusb_source_add(void *priv, int events, int timeout,
sr_receive_data_callback_t cb, void *cb_data)
{
struct scpi_usbtmc_libusb *uscpi = priv;
(void)events;
return usb_source_add(uscpi->ctx, timeout, cb, cb_data);
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
struct dev_context *devc;
struct drv_context *drvc = di->priv;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
devc->cb_data = cb_data;
if (configure_probes(sdi) != SR_OK) {
sr_err("Failed to configure probes.");
return SR_ERR;
}
if (dso_init(sdi) != SR_OK)
return SR_ERR;
if (dso_capture_start(sdi) != SR_OK)
return SR_ERR;
devc->dev_state = CAPTURE;
usb_source_add(drvc->sr_ctx, TICK, handle_event, (void *)sdi);
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
struct dev_context *devc;
struct sr_dev_driver *di = sdi->driver;
struct drv_context *drvc = di->context;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
devc->cb_data = cb_data;
if (configure_channels(sdi) != SR_OK) {
sr_err("Failed to configure channels.");
return SR_ERR;
}
if (hantek_6xxx_init(sdi) != SR_OK)
return SR_ERR;
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
devc->samp_received = 0;
devc->dev_state = FLUSH;
usb_source_add(sdi->session, drvc->sr_ctx, TICK,
handle_event, (void *)sdi);
hantek_6xxx_start_data_collecting(sdi);
read_channel(sdi, FLUSH_PACKET_SIZE);
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
struct drv_context *drvc;
struct dev_context *devc;
struct acquisition_state *acq;
int ret;
(void)cb_data;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
drvc = di->priv;
if (devc->acquisition) {
sr_err("Acquisition still in progress?");
return SR_ERR;
}
acq = lwla_alloc_acquisition_state();
if (!acq)
return SR_ERR_MALLOC;
devc->stopping_in_progress = FALSE;
devc->transfer_error = FALSE;
sr_info("Starting acquisition.");
devc->acquisition = acq;
lwla_convert_trigger(sdi);
ret = lwla_setup_acquisition(sdi);
if (ret != SR_OK) {
sr_err("Failed to set up acquisition.");
devc->acquisition = NULL;
lwla_free_acquisition_state(acq);
return ret;
}
ret = lwla_start_acquisition(sdi);
if (ret != SR_OK) {
sr_err("Failed to start acquisition.");
devc->acquisition = NULL;
lwla_free_acquisition_state(acq);
return ret;
}
usb_source_add(sdi->session, drvc->sr_ctx, 100, &lwla_receive_data,
(struct sr_dev_inst *)sdi);
sr_info("Waiting for data.");
/* Send header packet to the session bus. */
std_session_send_df_header(sdi, LOG_PREFIX);
return SR_OK;
}
SR_PRIV int lwla_start_acquisition(const struct sr_dev_inst *sdi)
{
struct drv_context *drvc;
struct dev_context *devc;
int ret;
const int poll_interval_ms = 100;
drvc = sdi->driver->context;
devc = sdi->priv;
if (devc->state != STATE_IDLE) {
sr_err("Not in idle state, cannot start acquisition.");
return SR_ERR;
}
devc->cancel_requested = FALSE;
devc->transfer_error = FALSE;
ret = init_acquisition_state(sdi);
if (ret != SR_OK)
return ret;
ret = (*devc->model->setup_acquisition)(sdi);
if (ret != SR_OK) {
sr_err("Failed to set up device for acquisition.");
clear_acquisition_state(sdi);
return ret;
}
/* Register event source for asynchronous USB I/O. */
ret = usb_source_add(sdi->session, drvc->sr_ctx, poll_interval_ms,
&transfer_event, (struct sr_dev_inst *)sdi);
if (ret != SR_OK) {
clear_acquisition_state(sdi);
return ret;
}
ret = submit_request(sdi, STATE_START_CAPTURE);
if (ret == SR_OK)
ret = std_session_send_df_header(sdi, LOG_PREFIX);
if (ret != SR_OK) {
usb_source_remove(sdi->session, drvc->sr_ctx);
clear_acquisition_state(sdi);
}
return ret;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct drv_context *drvc;
int ret;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
drvc = sdi->driver->context;
if ((ret = lls_start_acquisition(sdi)) < 0)
return ret;
std_session_send_df_header(sdi);
return usb_source_add(sdi->session, drvc->sr_ctx, 100,
receive_usb_data, drvc);
}
SR_PRIV int fx2lafw_start_acquisition(const struct sr_dev_inst *sdi)
{
struct sr_dev_driver *di;
struct drv_context *drvc;
struct dev_context *devc;
int timeout, ret;
size_t size;
di = sdi->driver;
drvc = di->context;
devc = sdi->priv;
devc->ctx = drvc->sr_ctx;
devc->sent_samples = 0;
devc->empty_transfer_count = 0;
devc->acq_aborted = FALSE;
if (configure_channels(sdi) != SR_OK) {
sr_err("Failed to configure channels.");
return SR_ERR;
}
timeout = get_timeout(devc);
usb_source_add(sdi->session, devc->ctx, timeout, receive_data, drvc);
size = get_buffer_size(devc);
/* Prepare for analog sampling. */
if (g_slist_length(devc->enabled_analog_channels) > 0) {
/* We need a buffer half the size of a transfer. */
devc->logic_buffer = g_try_malloc(size / 2);
devc->analog_buffer = g_try_malloc(
sizeof(float) * size / 2);
}
start_transfers(sdi);
if ((ret = command_start_acquisition(sdi)) != SR_OK) {
fx2lafw_abort_acquisition(devc);
return ret;
}
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
struct drv_context *drvc;
struct dev_context *devc;
uint16_t trigger_bytes, tmp;
unsigned int i, j;
int ret;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
drvc = di->priv;
devc->cb_data = cb_data;
devc->wait_data_ready_locked = TRUE;
devc->stopping_in_progress = FALSE;
devc->transfer_error = FALSE;
devc->samples_processed = 0;
devc->channel = 0;
devc->sample_packet = 0;
/*
* The trigger must be configured first because the calculation of the
* pre and post trigger samples depends on a configured trigger.
*/
sl2_configure_trigger(sdi);
sl2_calculate_trigger_samples(sdi);
trigger_bytes = devc->pre_trigger_bytes + devc->post_trigger_bytes;
/* Calculate the number of expected sample packets. */
devc->num_sample_packets = trigger_bytes / PACKET_NUM_SAMPLE_BYTES;
/* Round up the number of expected sample packets. */
if (trigger_bytes % PACKET_NUM_SAMPLE_BYTES != 0)
devc->num_sample_packets++;
devc->num_enabled_probes = 0;
/*
* Count the number of enabled probes and number them for a sequential
* access.
*/
for (i = 0, j = 0; i < NUM_PROBES; i++) {
if (devc->probes[i]->enabled) {
devc->num_enabled_probes++;
devc->probe_map[j] = i;
j++;
}
}
sr_dbg("Number of enabled probes: %i.", devc->num_enabled_probes);
/* Set up the transfer buffer for the acquisition. */
devc->xfer_data_out[0] = CMD_SAMPLE;
devc->xfer_data_out[1] = 0x00;
tmp = GUINT16_TO_LE(devc->pre_trigger_bytes);
memcpy(devc->xfer_data_out + 2, &tmp, sizeof(tmp));
tmp = GUINT16_TO_LE(devc->post_trigger_bytes);
memcpy(devc->xfer_data_out + 4, &tmp, sizeof(tmp));
devc->xfer_data_out[6] = devc->samplerate_id;
devc->xfer_data_out[7] = devc->trigger_type;
devc->xfer_data_out[8] = devc->trigger_channel;
devc->xfer_data_out[9] = 0x00;
tmp = GUINT16_TO_LE(devc->after_trigger_delay);
memcpy(devc->xfer_data_out + 10, &tmp, sizeof(tmp));
if ((ret = libusb_submit_transfer(devc->xfer_out)) != 0) {
sr_err("Submit transfer failed: %s.", libusb_error_name(ret));
return SR_ERR;
}
usb_source_add(drvc->sr_ctx, 100, ikalogic_scanalogic2_receive_data, (void *)sdi);
sr_dbg("Acquisition started successfully.");
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
devc->next_state = STATE_SAMPLE;
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct sr_dev_driver *di = sdi->driver;
struct drv_context *drvc;
struct dev_context *devc;
struct sr_datafeed_packet packet;
struct sr_datafeed_meta meta;
struct sr_config *src;
struct sr_usb_dev_inst *usb;
GVariant *gvar, *rational[2];
const uint64_t *si;
int req_len, buf_len, len, ret;
unsigned char buf[9];
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
drvc = di->context;
devc = sdi->priv;
usb = sdi->conn;
devc->num_samples = 0;
std_session_send_df_header(sdi);
if (devc->data_source == DATA_SOURCE_LIVE) {
/* Force configuration. */
kecheng_kc_330b_configure(sdi);
if (kecheng_kc_330b_status_get(sdi, &ret) != SR_OK)
return SR_ERR;
if (ret != DEVICE_ACTIVE) {
sr_err("Device is inactive");
/* Still continue though, since the device will
* just return 30.0 until the user hits the button
* on the device -- and then start feeding good
* samples back. */
}
} else {
if (kecheng_kc_330b_log_info_get(sdi, buf) != SR_OK)
return SR_ERR;
devc->mqflags = buf[4] ? SR_MQFLAG_SPL_TIME_WEIGHT_S : SR_MQFLAG_SPL_TIME_WEIGHT_F;
devc->mqflags |= buf[5] ? SR_MQFLAG_SPL_FREQ_WEIGHT_C : SR_MQFLAG_SPL_FREQ_WEIGHT_A;
devc->stored_samples = (buf[7] << 8) | buf[8];
if (devc->stored_samples == 0) {
/* Notify frontend of empty log by sending start/end packets. */
std_session_send_df_end(sdi);
return SR_OK;
}
if (devc->limit_samples && devc->limit_samples < devc->stored_samples)
devc->stored_samples = devc->limit_samples;
si = kecheng_kc_330b_sample_intervals[buf[1]];
rational[0] = g_variant_new_uint64(si[0]);
rational[1] = g_variant_new_uint64(si[1]);
gvar = g_variant_new_tuple(rational, 2);
src = sr_config_new(SR_CONF_SAMPLE_INTERVAL, gvar);
packet.type = SR_DF_META;
packet.payload = &meta;
meta.config = g_slist_append(NULL, src);
sr_session_send(sdi, &packet);
g_free(src);
}
if (!(devc->xfer = libusb_alloc_transfer(0)))
return SR_ERR;
usb_source_add(sdi->session, drvc->sr_ctx, 10,
kecheng_kc_330b_handle_events, (void *)sdi);
if (devc->data_source == DATA_SOURCE_LIVE) {
buf[0] = CMD_GET_LIVE_SPL;
buf_len = 1;
devc->state = LIVE_SPL_WAIT;
devc->last_live_request = g_get_monotonic_time() / 1000;
req_len = 3;
} else {
buf[0] = CMD_GET_LOG_DATA;
buf[1] = 0;
buf[2] = 0;
buf_len = 4;
devc->state = LOG_DATA_WAIT;
if (devc->stored_samples < 63)
buf[3] = devc->stored_samples;
else
buf[3] = 63;
/* Command ack byte + 2 bytes per sample. */
req_len = 1 + buf[3] * 2;
}
ret = libusb_bulk_transfer(usb->devhdl, EP_OUT, buf, buf_len, &len, 5);
if (ret != 0 || len != 1) {
sr_dbg("Failed to start acquisition: %s", libusb_error_name(ret));
libusb_free_transfer(devc->xfer);
return SR_ERR;
}
libusb_fill_bulk_transfer(devc->xfer, usb->devhdl, EP_IN, devc->buf,
req_len, kecheng_kc_330b_receive_transfer, (void *)sdi, 15);
if (libusb_submit_transfer(devc->xfer) != 0) {
libusb_free_transfer(devc->xfer);
return SR_ERR;
}
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct sr_dev_driver *di = sdi->driver;
struct drv_context *drvc;
struct dev_context *devc;
struct sr_usb_dev_inst *usb;
int len, ret;
unsigned char cmd[2];
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
drvc = di->context;
devc = sdi->priv;
usb = sdi->conn;
devc->num_samples = 0;
devc->packet_len = 0;
/* Configure serial port parameters on USB-UART interface
* chip inside the device (just baudrate 2400 actually). */
cmd[0] = 0x09;
cmd[1] = 0x60;
ret = libusb_control_transfer(usb->devhdl, 0x21, 0x09, 0x0300, 0x00,
cmd, 2, 5);
if (ret != 2) {
sr_dbg("Failed to configure CH9325: %s", libusb_error_name(ret));
return SR_ERR;
}
std_session_send_df_header(sdi);
if (!(devc->xfer = libusb_alloc_transfer(0)))
return SR_ERR;
/* Length of payload to follow. */
cmd[0] = 0x01;
if (devc->data_source == DATA_SOURCE_LIVE)
cmd[1] = CMD_GET_LIVE;
else
cmd[1] = CMD_GET_STORED;
ret = libusb_bulk_transfer(usb->devhdl, EP_OUT, cmd, 2, &len, 5);
if (ret != 0 || len != 2) {
sr_dbg("Failed to start acquisition: %s", libusb_error_name(ret));
libusb_free_transfer(devc->xfer);
return SR_ERR;
}
libusb_fill_bulk_transfer(devc->xfer, usb->devhdl, EP_IN, devc->buf,
8, uni_t_ut32x_receive_transfer, (void *)sdi, 15);
if (libusb_submit_transfer(devc->xfer) != 0) {
libusb_free_transfer(devc->xfer);
return SR_ERR;
}
usb_source_add(sdi->session, drvc->sr_ctx, 10,
uni_t_ut32x_handle_events, (void *)sdi);
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
struct sr_dev_driver *di = sdi->driver;
struct dev_context *devc;
struct drv_context *drvc;
struct sr_usb_dev_inst *usb;
struct sr_trigger *trigger;
struct libusb_transfer *transfer;
unsigned int i, timeout, num_transfers;
int ret;
unsigned char *buf;
size_t size, convsize;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
drvc = di->priv;
devc = sdi->priv;
usb = sdi->conn;
/* Configures devc->cur_channels. */
if (configure_channels(sdi) != SR_OK) {
sr_err("Failed to configure channels.");
return SR_ERR;
}
devc->cb_data = cb_data;
devc->sent_samples = 0;
devc->empty_transfer_count = 0;
devc->cur_channel = 0;
memset(devc->channel_data, 0, sizeof(devc->channel_data));
if ((trigger = sr_session_trigger_get(sdi->session))) {
int pre_trigger_samples = 0;
if (devc->limit_samples > 0)
pre_trigger_samples = devc->capture_ratio * devc->limit_samples/100;
devc->stl = soft_trigger_logic_new(sdi, trigger, pre_trigger_samples);
if (!devc->stl)
return SR_ERR_MALLOC;
devc->trigger_fired = FALSE;
} else
devc->trigger_fired = TRUE;
timeout = get_timeout(devc);
num_transfers = get_number_of_transfers(devc);
size = get_buffer_size(devc);
convsize = (size / devc->num_channels + 2) * 16;
devc->submitted_transfers = 0;
devc->convbuffer_size = convsize;
if (!(devc->convbuffer = g_try_malloc(convsize))) {
sr_err("Conversion buffer malloc failed.");
return SR_ERR_MALLOC;
}
devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
if (!devc->transfers) {
sr_err("USB transfers malloc failed.");
g_free(devc->convbuffer);
return SR_ERR_MALLOC;
}
if ((ret = logic16_setup_acquisition(sdi, devc->cur_samplerate,
devc->cur_channels)) != SR_OK) {
g_free(devc->transfers);
g_free(devc->convbuffer);
return ret;
}
devc->num_transfers = num_transfers;
for (i = 0; i < num_transfers; i++) {
if (!(buf = g_try_malloc(size))) {
sr_err("USB transfer buffer malloc failed.");
if (devc->submitted_transfers)
abort_acquisition(devc);
else {
g_free(devc->transfers);
g_free(devc->convbuffer);
}
return SR_ERR_MALLOC;
}
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, usb->devhdl,
2 | LIBUSB_ENDPOINT_IN, buf, size,
logic16_receive_transfer, (void *)sdi, timeout);
if ((ret = libusb_submit_transfer(transfer)) != 0) {
sr_err("Failed to submit transfer: %s.",
libusb_error_name(ret));
libusb_free_transfer(transfer);
g_free(buf);
abort_acquisition(devc);
return SR_ERR;
}
devc->transfers[i] = transfer;
devc->submitted_transfers++;
}
devc->ctx = drvc->sr_ctx;
usb_source_add(sdi->session, devc->ctx, timeout, receive_data, (void *)sdi);
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
if ((ret = logic16_start_acquisition(sdi)) != SR_OK) {
abort_acquisition(devc);
return ret;
}
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
{
struct dev_context *devc;
struct drv_context *drvc;
struct sr_usb_dev_inst *usb;
struct sr_trigger *trigger;
struct libusb_transfer *transfer;
unsigned int i, timeout, num_transfers;
int ret;
unsigned char *buf;
size_t size;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
drvc = di->priv;
devc = sdi->priv;
usb = sdi->conn;
devc->cb_data = cb_data;
devc->sent_samples = 0;
devc->acq_aborted = FALSE;
devc->empty_transfer_count = 0;
if ((trigger = sr_session_trigger_get())) {
devc->stl = soft_trigger_logic_new(sdi, trigger);
devc->trigger_fired = FALSE;
} else
devc->trigger_fired = TRUE;
timeout = fx2lafw_get_timeout(devc);
num_transfers = fx2lafw_get_number_of_transfers(devc);
size = fx2lafw_get_buffer_size(devc);
devc->submitted_transfers = 0;
devc->transfers = g_try_malloc0(sizeof(*devc->transfers) * num_transfers);
if (!devc->transfers) {
sr_err("USB transfers malloc failed.");
return SR_ERR_MALLOC;
}
devc->num_transfers = num_transfers;
for (i = 0; i < num_transfers; i++) {
if (!(buf = g_try_malloc(size))) {
sr_err("USB transfer buffer malloc failed.");
return SR_ERR_MALLOC;
}
transfer = libusb_alloc_transfer(0);
libusb_fill_bulk_transfer(transfer, usb->devhdl,
2 | LIBUSB_ENDPOINT_IN, buf, size,
fx2lafw_receive_transfer, (void *)sdi, timeout);
if ((ret = libusb_submit_transfer(transfer)) != 0) {
sr_err("Failed to submit transfer: %s.",
libusb_error_name(ret));
libusb_free_transfer(transfer);
g_free(buf);
fx2lafw_abort_acquisition(devc);
return SR_ERR;
}
devc->transfers[i] = transfer;
devc->submitted_transfers++;
}
devc->ctx = drvc->sr_ctx;
usb_source_add(devc->ctx, timeout, receive_data, NULL);
/* Send header packet to the session bus. */
std_session_send_df_header(cb_data, LOG_PREFIX);
if ((ret = fx2lafw_command_start_acquisition(sdi)) != SR_OK) {
fx2lafw_abort_acquisition(devc);
return ret;
}
return SR_OK;
}
