/*
* platform functions
*/
static int usbhs_probe(struct platform_device *pdev)
{
struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev);
struct renesas_usbhs_driver_callback *dfunc;
struct usbhs_priv *priv;
struct resource *res, *irq_res;
int ret;
/* check platform information */
if (!info) {
dev_err(&pdev->dev, "no platform information\n");
return -EINVAL;
}
/* platform data */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res || !irq_res) {
dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
return -ENODEV;
}
/* usb private data */
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "Could not allocate priv\n");
return -ENOMEM;
}
priv->base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
/*
* care platform info
*/
memcpy(&priv->dparam,
&info->driver_param,
sizeof(struct renesas_usbhs_driver_param));
switch (priv->dparam.type) {
case USBHS_TYPE_R8A7790:
case USBHS_TYPE_R8A7791:
priv->pfunc = usbhs_rcar2_ops;
if (!priv->dparam.pipe_type) {
priv->dparam.pipe_type = usbhsc_new_pipe_type;
priv->dparam.pipe_size =
ARRAY_SIZE(usbhsc_new_pipe_type);
}
break;
default:
if (!info->platform_callback.get_id) {
dev_err(&pdev->dev, "no platform callbacks");
return -EINVAL;
}
memcpy(&priv->pfunc,
&info->platform_callback,
sizeof(struct renesas_usbhs_platform_callback));
break;
}
/* set driver callback functions for platform */
dfunc = &info->driver_callback;
dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug;
/* set default param if platform doesn't have */
if (!priv->dparam.pipe_type) {
priv->dparam.pipe_type = usbhsc_default_pipe_type;
priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
}
if (!priv->dparam.pio_dma_border)
priv->dparam.pio_dma_border = 64; /* 64byte */
/* FIXME */
/* runtime power control ? */
if (priv->pfunc.get_vbus)
usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
/*
* priv settings
*/
priv->irq = irq_res->start;
if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE)
priv->irqflags = IRQF_SHARED;
priv->pdev = pdev;
INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
spin_lock_init(usbhs_priv_to_lock(priv));
/* call pipe and module init */
ret = usbhs_pipe_probe(priv);
if (ret < 0)
return ret;
ret = usbhs_fifo_probe(priv);
if (ret < 0)
goto probe_end_pipe_exit;
ret = usbhs_mod_probe(priv);
if (ret < 0)
goto probe_end_fifo_exit;
/* dev_set_drvdata should be called after usbhs_mod_init */
platform_set_drvdata(pdev, priv);
/*
* deviece reset here because
* USB device might be used in boot loader.
*/
usbhs_sys_clock_ctrl(priv, 0);
/* check GPIO determining if USB function should be enabled */
if (priv->dparam.enable_gpio) {
gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL);
ret = !gpio_get_value(priv->dparam.enable_gpio);
gpio_free(priv->dparam.enable_gpio);
if (ret) {
dev_warn(&pdev->dev,
"USB function not selected (GPIO %d)\n",
priv->dparam.enable_gpio);
ret = -ENOTSUPP;
goto probe_end_mod_exit;
}
}
/*
* platform call
*
* USB phy setup might depend on CPU/Board.
* If platform has its callback functions,
* call it here.
*/
ret = usbhs_platform_call(priv, hardware_init, pdev);
if (ret < 0) {
dev_err(&pdev->dev, "platform prove failed.\n");
goto probe_end_mod_exit;
}
/* reset phy for connection */
usbhs_platform_call(priv, phy_reset, pdev);
/* power control */
pm_runtime_enable(&pdev->dev);
if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
usbhsc_power_ctrl(priv, 1);
usbhs_mod_autonomy_mode(priv);
}
/*
* manual call notify_hotplug for cold plug
*/
ret = usbhsc_drvcllbck_notify_hotplug(pdev);
if (ret < 0)
goto probe_end_call_remove;
dev_info(&pdev->dev, "probed\n");
return ret;
probe_end_call_remove:
usbhs_platform_call(priv, hardware_exit, pdev);
probe_end_mod_exit:
usbhs_mod_remove(priv);
probe_end_fifo_exit:
usbhs_fifo_remove(priv);
probe_end_pipe_exit:
usbhs_pipe_remove(priv);
dev_info(&pdev->dev, "probe failed\n");
return ret;
}
/*
* platform functions
*/
static int __devinit usbhs_probe(struct platform_device *pdev)
{
struct renesas_usbhs_platform_info *info = pdev->dev.platform_data;
struct renesas_usbhs_driver_callback *dfunc;
struct usbhs_priv *priv;
struct resource *res;
unsigned int irq;
int ret;
/* check platform information */
if (!info ||
!info->platform_callback.get_id) {
dev_err(&pdev->dev, "no platform information\n");
return -EINVAL;
}
/* platform data */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!res || (int)irq <= 0) {
dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n");
return -ENODEV;
}
/* usb private data */
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(&pdev->dev, "Could not allocate priv\n");
return -ENOMEM;
}
priv->base = ioremap_nocache(res->start, resource_size(res));
if (!priv->base) {
dev_err(&pdev->dev, "ioremap error.\n");
ret = -ENOMEM;
goto probe_end_kfree;
}
/*
* care platform info
*/
priv->pfunc = &info->platform_callback;
priv->dparam = &info->driver_param;
/* set driver callback functions for platform */
dfunc = &info->driver_callback;
dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug;
/* set default param if platform doesn't have */
if (!priv->dparam->pipe_type) {
priv->dparam->pipe_type = usbhsc_default_pipe_type;
priv->dparam->pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type);
}
if (!priv->dparam->pio_dma_border)
priv->dparam->pio_dma_border = 64; /* 64byte */
/* FIXME */
/* runtime power control ? */
if (priv->pfunc->get_vbus)
usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL);
/*
* priv settings
*/
priv->irq = irq;
priv->pdev = pdev;
INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
spin_lock_init(usbhs_priv_to_lock(priv));
/* call pipe and module init */
ret = usbhs_pipe_probe(priv);
if (ret < 0)
goto probe_end_iounmap;
ret = usbhs_fifo_probe(priv);
if (ret < 0)
goto probe_end_pipe_exit;
ret = usbhs_mod_probe(priv);
if (ret < 0)
goto probe_end_fifo_exit;
/* dev_set_drvdata should be called after usbhs_mod_init */
dev_set_drvdata(&pdev->dev, priv);
/*
* deviece reset here because
* USB device might be used in boot loader.
*/
usbhs_sys_clock_ctrl(priv, 0);
/*
* platform call
*
* USB phy setup might depend on CPU/Board.
* If platform has its callback functions,
* call it here.
*/
ret = usbhs_platform_call(priv, hardware_init, pdev);
if (ret < 0) {
dev_err(&pdev->dev, "platform prove failed.\n");
goto probe_end_mod_exit;
}
/* reset phy for connection */
usbhs_platform_call(priv, phy_reset, pdev);
/* power control */
pm_runtime_enable(&pdev->dev);
if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) {
usbhsc_power_ctrl(priv, 1);
usbhs_mod_autonomy_mode(priv);
}
/*
* manual call notify_hotplug for cold plug
*/
ret = usbhsc_drvcllbck_notify_hotplug(pdev);
if (ret < 0)
goto probe_end_call_remove;
dev_info(&pdev->dev, "probed\n");
return ret;
probe_end_call_remove:
usbhs_platform_call(priv, hardware_exit, pdev);
probe_end_mod_exit:
usbhs_mod_remove(priv);
probe_end_fifo_exit:
usbhs_fifo_remove(priv);
probe_end_pipe_exit:
usbhs_pipe_remove(priv);
probe_end_iounmap:
iounmap(priv->base);
probe_end_kfree:
kfree(priv);
dev_info(&pdev->dev, "probe failed\n");
return ret;
}
