static int uvc_buffer_prepare(struct vb2_buffer *vb)
{
struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue);
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
struct uvc_buffer *buf = container_of(vbuf, struct uvc_buffer, buf);
if (vb->type == V4L2_BUF_TYPE_VIDEO_OUTPUT &&
vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) {
uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n");
return -EINVAL;
}
if (unlikely(queue->flags & UVC_QUEUE_DISCONNECTED))
return -ENODEV;
buf->state = UVC_BUF_STATE_QUEUED;
buf->mem = vb2_plane_vaddr(vb, 0);
buf->length = vb2_plane_size(vb, 0);
if (vb->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
buf->bytesused = 0;
else
buf->bytesused = vb2_get_plane_payload(vb, 0);
return 0;
}
static int unicam_videobuf_prepare(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->
current_fmt->host_fmt);
unsigned long size;
pr_debug("-enter");
if (bytes_per_line < 0)
return bytes_per_line;
pr_debug("vb=0x%p buf=0x%p, size=%lu", vb,
(void *)vb2_plane_dma_addr(vb, 0),
vb2_get_plane_payload(vb, 0));
size = icd->user_height * bytes_per_line;
if (vb2_plane_size(vb, 0) < size) {
dev_err(icd->dev.parent, "Buffer too small (%lu < %lu)\n",
vb2_plane_size(vb, 0), size);
return -ENOBUFS;
}
vb2_set_plane_payload(vb, 0, size);
pr_debug("-exit");
return 0;
}
static void unicam_videobuf_queue(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct unicam_camera_dev *unicam_dev = ici->priv;
struct unicam_camera_buffer *buf = to_unicam_camera_vb(vb);
unsigned long flags;
dprintk("-enter");
dprintk("vb=0x%p vbuf=0x%p pbuf=0x%p size=%lu", vb,
vb2_plane_vaddr(vb, 0), (void *)vb2_dma_contig_plane_dma_addr(vb,
0),
vb2_get_plane_payload(vb, 0));
spin_lock_irqsave(&unicam_dev->lock, flags);
list_add_tail(&buf->queue, &unicam_dev->capture);
if (!unicam_dev->active) {
unicam_dev->active = vb;
/* use this buffer to trigger capture */
/* Configure HW only is streamon has been done
* else only update active, HW would be configured
* by streamon */
if(unicam_dev->streaming){
unicam_camera_update_buf(unicam_dev);
if (unicam_dev->if_params.if_mode ==
V4L2_SUBDEV_SENSOR_MODE_SERIAL_CSI2)
unicam_camera_capture(unicam_dev);
}
}
spin_unlock_irqrestore(&unicam_dev->lock, flags);
dprintk("-exit");
}
static int alsa_pb_fnc(struct vb2_buffer *vb, void *priv)
{
struct cobalt_stream *s = priv;
if (s->alsa->alsa_pb_channel)
cobalt_alsa_pb_pcm_data(s->alsa,
vb2_plane_vaddr(vb, 0),
8 * 4,
vb2_get_plane_payload(vb, 0) / (8 * 4));
return 0;
}
static void bdisp_buf_queue(struct vb2_buffer *vb)
{
struct bdisp_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
/* return to V4L2 any 0-size buffer so it can be dequeued by user */
if (!vb2_get_plane_payload(vb, 0)) {
dev_dbg(ctx->bdisp_dev->dev, "0 data buffer, skip it\n");
vb2_buffer_done(vb, VB2_BUF_STATE_DONE);
return;
}
if (ctx->fh.m2m_ctx)
v4l2_m2m_buf_queue(ctx->fh.m2m_ctx, vb);
}
static void unicam_videobuf_queue(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct unicam_camera_dev *unicam_dev = ici->priv;
struct unicam_camera_buffer *buf = to_unicam_camera_vb(vb);
unsigned long flags;
struct int_desc idesc;
pr_debug("-enter");
pr_debug("vb=0x%p pbuf=0x%p size=%lu", vb,
(void *)vb2_plane_dma_addr(vb, 0),
vb2_get_plane_payload(vb, 0));
/* pr_info("Q 0x%x\n", vb2_plane_paddr(vb, 0)); */
spin_lock_irqsave(&unicam_dev->lock, flags);
list_add_tail(&buf->queue, &unicam_dev->capture);
if(unicam_dev->cap_mode && unicam_dev->cap_done){
pr_info("Cap mode and already captured\n");
spin_unlock_irqrestore(&unicam_dev->lock, flags);
return;
}
if ((!unicam_dev->active)) {
unicam_dev->active = vb;
unicam_camera_update_buf(unicam_dev);
if (atomic_read(&unicam_dev->streaming)) {
mm_csi0_start_rx();
/* set data capture */
if (unicam_dev->if_params.if_mode == V4L2_SUBDEV_SENSOR_MODE_SERIAL_CSI2) {
idesc.fsi = 1;
idesc.fei = 1;
idesc.lci = 0;
idesc.die = 1;
idesc.dataline = 2;
mm_csi0_config_int(&idesc, IMAGE_BUFFER);
mm_csi0_config_int(&idesc, DATA_BUFFER);
unicam_camera_capture(unicam_dev);
} else {
idesc.fsi = 0;
idesc.fei = 0;
idesc.lci = unicam_dev->icd->user_height;
idesc.die = 0;
idesc.dataline = 0;
mm_csi0_config_int(&idesc, IMAGE_BUFFER);
}
}
}
spin_unlock_irqrestore(&unicam_dev->lock, flags);
pr_debug("-exit");
}
static void rcar_vin_videobuf_queue(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->parent);
struct rcar_vin_priv *priv = ici->priv;
unsigned long size;
size = icd->sizeimage;
if (vb2_plane_size(vb, 0) < size) {
dev_err(icd->parent, "Buffer #%d too small (%lu < %lu)\n",
vb->v4l2_buf.index, vb2_plane_size(vb, 0), size);
goto error;
}
vb2_set_plane_payload(vb, 0, size);
dev_dbg(icd->parent, "%s (vb=0x%p) 0x%p %lu\n", __func__,
vb, vb2_plane_vaddr(vb, 0), vb2_get_plane_payload(vb, 0));
spin_lock_irq(&priv->lock);
list_add_tail(to_buf_list(vb), &priv->capture);
rcar_vin_fill_hw_slot(priv);
/* If we weren't running, and have enough buffers, start capturing! */
if (priv->state != RUNNING && rcar_vin_hw_ready(priv)) {
if (rcar_vin_setup(priv)) {
/* Submit error */
list_del_init(to_buf_list(vb));
spin_unlock_irq(&priv->lock);
goto error;
}
priv->request_to_stop = false;
init_completion(&priv->capture_stop);
priv->state = RUNNING;
rcar_vin_capture(priv);
}
spin_unlock_irq(&priv->lock);
return;
error:
vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
int coda_sps_parse_profile(struct coda_ctx *ctx, struct vb2_buffer *vb)
{
const u8 *buf = vb2_plane_vaddr(vb, 0);
const u8 *end = buf + vb2_get_plane_payload(vb, 0);
/* Find SPS header */
do {
buf = coda_find_nal_header(buf, end);
if (!buf)
return -EINVAL;
} while ((*buf++ & 0x1f) != 0x7);
ctx->params.h264_profile_idc = buf[0];
ctx->params.h264_level_idc = buf[2];
return 0;
}
void hva_dbg_perf_end(struct hva_ctx *ctx, struct hva_stream *stream)
{
struct device *dev = ctx_to_dev(ctx);
u64 div;
u32 duration;
u32 bytesused;
u32 timestamp;
struct hva_ctx_dbg *dbg = &ctx->dbg;
ktime_t end = ktime_get();
/* stream bytesused and timestamp in us */
bytesused = vb2_get_plane_payload(&stream->vbuf.vb2_buf, 0);
div = stream->vbuf.vb2_buf.timestamp;
do_div(div, 1000);
timestamp = (u32)div;
/* encoding duration */
div = (u64)ktime_us_delta(end, dbg->begin);
dev_dbg(dev,
"%s perf stream[%d] dts=%d encoded using %d bytes in %d us",
ctx->name,
stream->vbuf.sequence,
timestamp,
bytesused, (u32)div);
do_div(div, 100);
duration = (u32)div;
dbg->min_duration = min(duration, dbg->min_duration);
dbg->max_duration = max(duration, dbg->max_duration);
dbg->total_duration += duration;
dbg->cnt_duration++;
/*
* the average bitrate is based on the total stream size
* and the total encoding periods
*/
dbg->total_stream_size += bytesused;
dbg->window_stream_size += bytesused;
dbg->is_valid_period = true;
}
static int alsa_fnc(struct vb2_buffer *vb, void *priv)
{
struct cobalt_stream *s = priv;
unsigned char *p = vb2_plane_vaddr(vb, 0);
int i;
if (pcm_debug) {
pr_info("alsa: ");
for (i = 0; i < 8 * 4; i++) {
if (!(i & 3))
pr_cont(" ");
pr_cont("%02x", p[i]);
}
pr_cont("\n");
}
cobalt_alsa_announce_pcm_data(s->alsa,
vb2_plane_vaddr(vb, 0),
8 * 4,
vb2_get_plane_payload(vb, 0) / (8 * 4));
return 0;
}
static void unicam_videobuf_release(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct unicam_camera_dev *unicam_dev = ici->priv;
struct unicam_camera_buffer *buf = to_unicam_camera_vb(vb);
unsigned long flags;
pr_debug("-enter");
pr_debug("vb=0x%p pbuf=0x%p size=%lu", vb,
(void *)vb2_plane_dma_addr(vb, 0),
vb2_get_plane_payload(vb, 0));
spin_lock_irqsave(&unicam_dev->lock, flags);
if (buf->magic == UNICAM_BUF_MAGIC)
list_del_init(&buf->queue);
spin_unlock_irqrestore(&unicam_dev->lock, flags);
pr_debug("-exit");
}
/**
* __vb2_perform_fileio() - perform a single file io (read or write) operation
* @q: videobuf2 queue
* @data: pointed to target userspace buffer
* @count: number of bytes to read or write
* @ppos: file handle position tracking pointer
* @nonblock: mode selector (1 means blocking calls, 0 means nonblocking)
* @read: access mode selector (1 means read, 0 means write)
*/
static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock, int read)
{
struct vb2_fileio_data *fileio;
struct vb2_fileio_buf *buf;
int ret, index;
dprintk(3, "file io: mode %s, offset %ld, count %zd, %sblocking\n",
read ? "read" : "write", (long)*ppos, count,
nonblock ? "non" : "");
if (!data)
return -EINVAL;
/*
* Initialize emulator on first call.
*/
if (!q->fileio) {
ret = __vb2_init_fileio(q, read);
dprintk(3, "file io: vb2_init_fileio result: %d\n", ret);
if (ret)
return ret;
}
fileio = q->fileio;
/*
* Hack fileio context to enable direct calls to vb2 ioctl interface.
* The pointer will be restored before returning from this function.
*/
q->fileio = NULL;
index = fileio->index;
buf = &fileio->bufs[index];
/*
* Check if we need to dequeue the buffer.
*/
if (buf->queued) {
struct vb2_buffer *vb;
/*
* Call vb2_dqbuf to get buffer back.
*/
memset(&fileio->b, 0, sizeof(fileio->b));
fileio->b.type = q->type;
fileio->b.memory = q->memory;
fileio->b.index = index;
ret = vb2_dqbuf(q, &fileio->b, nonblock);
dprintk(5, "file io: vb2_dqbuf result: %d\n", ret);
if (ret)
goto end;
fileio->dq_count += 1;
/*
* Get number of bytes filled by the driver
*/
vb = q->bufs[index];
buf->size = vb2_get_plane_payload(vb, 0);
buf->queued = 0;
}
/*
* Limit count on last few bytes of the buffer.
*/
if (buf->pos + count > buf->size) {
count = buf->size - buf->pos;
dprintk(5, "reducing read count: %zd\n", count);
}
/*
* Transfer data to userspace.
*/
dprintk(3, "file io: copying %zd bytes - buffer %d, offset %u\n",
count, index, buf->pos);
if (read)
ret = copy_to_user(data, buf->vaddr + buf->pos, count);
else
ret = copy_from_user(buf->vaddr + buf->pos, data, count);
if (ret) {
dprintk(3, "file io: error copying data\n");
ret = -EFAULT;
goto end;
}
/*
* Update counters.
*/
buf->pos += count;
*ppos += count;
/*
* Queue next buffer if required.
*/
if (buf->pos == buf->size ||
(!read && (fileio->flags & VB2_FILEIO_WRITE_IMMEDIATELY))) {
/*
* Check if this is the last buffer to read.
*/
if (read && (fileio->flags & VB2_FILEIO_READ_ONCE) &&
fileio->dq_count == 1) {
dprintk(3, "file io: read limit reached\n");
/*
* Restore fileio pointer and release the context.
*/
q->fileio = fileio;
return __vb2_cleanup_fileio(q);
}
/*
* Call vb2_qbuf and give buffer to the driver.
*/
memset(&fileio->b, 0, sizeof(fileio->b));
fileio->b.type = q->type;
fileio->b.memory = q->memory;
fileio->b.index = index;
fileio->b.bytesused = buf->pos;
ret = vb2_qbuf(q, &fileio->b);
dprintk(5, "file io: vb2_dbuf result: %d\n", ret);
if (ret)
goto end;
/*
* Buffer has been queued, update the status
*/
buf->pos = 0;
buf->queued = 1;
buf->size = q->bufs[0]->v4l2_planes[0].length;
fileio->q_count += 1;
/*
* Switch to the next buffer
*/
fileio->index = (index + 1) % q->num_buffers;
/*
* Start streaming if required.
*/
if (!read && !q->streaming) {
ret = vb2_streamon(q, q->type);
if (ret)
goto end;
}
}
/*
* Return proper number of bytes processed.
*/
if (ret == 0)
ret = count;
end:
/*
* Restore the fileio context and block vb2 ioctl interface.
*/
q->fileio = fileio;
return ret;
}
static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock, int read)
{
struct vb2_fileio_data *fileio;
struct vb2_fileio_buf *buf;
int ret, index;
dprintk(3, "file io: mode %s, offset %ld, count %zd, %sblocking\n",
read ? "read" : "write", (long)*ppos, count,
nonblock ? "non" : "");
if (!data)
return -EINVAL;
if (!q->fileio) {
ret = __vb2_init_fileio(q, read);
dprintk(3, "file io: vb2_init_fileio result: %d\n", ret);
if (ret)
return ret;
}
fileio = q->fileio;
q->fileio = NULL;
index = fileio->index;
buf = &fileio->bufs[index];
if (buf->queued) {
struct vb2_buffer *vb;
memset(&fileio->b, 0, sizeof(fileio->b));
fileio->b.type = q->type;
fileio->b.memory = q->memory;
fileio->b.index = index;
ret = vb2_dqbuf(q, &fileio->b, nonblock);
dprintk(5, "file io: vb2_dqbuf result: %d\n", ret);
if (ret)
goto end;
fileio->dq_count += 1;
vb = q->bufs[index];
buf->size = vb2_get_plane_payload(vb, 0);
buf->queued = 0;
}
if (buf->pos + count > buf->size) {
count = buf->size - buf->pos;
dprintk(5, "reducing read count: %zd\n", count);
}
dprintk(3, "file io: copying %zd bytes - buffer %d, offset %u\n",
count, index, buf->pos);
if (read)
ret = copy_to_user(data, buf->vaddr + buf->pos, count);
else
ret = copy_from_user(buf->vaddr + buf->pos, data, count);
if (ret) {
dprintk(3, "file io: error copying data\n");
ret = -EFAULT;
goto end;
}
buf->pos += count;
*ppos += count;
if (buf->pos == buf->size ||
(!read && (fileio->flags & VB2_FILEIO_WRITE_IMMEDIATELY))) {
if (read && (fileio->flags & VB2_FILEIO_READ_ONCE) &&
fileio->dq_count == 1) {
dprintk(3, "file io: read limit reached\n");
q->fileio = fileio;
return __vb2_cleanup_fileio(q);
}
memset(&fileio->b, 0, sizeof(fileio->b));
fileio->b.type = q->type;
fileio->b.memory = q->memory;
fileio->b.index = index;
fileio->b.bytesused = buf->pos;
ret = vb2_qbuf(q, &fileio->b);
dprintk(5, "file io: vb2_dbuf result: %d\n", ret);
if (ret)
goto end;
buf->pos = 0;
buf->queued = 1;
buf->size = q->bufs[0]->v4l2_planes[0].length;
fileio->q_count += 1;
fileio->index = (index + 1) % q->num_buffers;
if (!read && !q->streaming) {
ret = vb2_streamon(q, q->type);
if (ret)
goto end;
}
}
if (ret == 0)
ret = count;
end:
q->fileio = fileio;
return ret;
}
static void mx3_videobuf_queue(struct vb2_buffer *vb)
{
struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue);
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct mx3_camera_dev *mx3_cam = ici->priv;
struct mx3_camera_buffer *buf = to_mx3_vb(vb);
struct dma_async_tx_descriptor *txd = buf->txd;
struct idmac_channel *ichan = to_idmac_chan(txd->chan);
struct idmac_video_param *video = &ichan->params.video;
dma_cookie_t cookie;
u32 fourcc = icd->current_fmt->host_fmt->fourcc;
unsigned long flags;
/* This is the configuration of one sg-element */
video->out_pixel_fmt = fourcc_to_ipu_pix(fourcc);
if (video->out_pixel_fmt == IPU_PIX_FMT_GENERIC) {
/*
* If the IPU DMA channel is configured to transport
* generic 8-bit data, we have to set up correctly the
* geometry parameters upon the current pixel format.
* So, since the DMA horizontal parameters are expressed
* in bytes not pixels, convert these in the right unit.
*/
int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width,
icd->current_fmt->host_fmt);
BUG_ON(bytes_per_line <= 0);
video->out_width = bytes_per_line;
video->out_height = icd->user_height;
video->out_stride = bytes_per_line;
} else {
/*
* For IPU known formats the pixel unit will be managed
* successfully by the IPU code
*/
video->out_width = icd->user_width;
video->out_height = icd->user_height;
video->out_stride = icd->user_width;
}
#ifdef DEBUG
/* helps to see what DMA actually has written */
if (vb2_plane_vaddr(vb, 0))
memset(vb2_plane_vaddr(vb, 0), 0xaa, vb2_get_plane_payload(vb, 0));
#endif
spin_lock_irqsave(&mx3_cam->lock, flags);
list_add_tail(&buf->queue, &mx3_cam->capture);
if (!mx3_cam->active)
mx3_cam->active = buf;
spin_unlock_irq(&mx3_cam->lock);
cookie = txd->tx_submit(txd);
dev_dbg(icd->dev.parent, "Submitted cookie %d DMA 0x%08x\n",
cookie, sg_dma_address(&buf->sg));
if (cookie >= 0)
return;
spin_lock_irq(&mx3_cam->lock);
/* Submit error */
list_del_init(&buf->queue);
if (mx3_cam->active == buf)
mx3_cam->active = NULL;
spin_unlock_irqrestore(&mx3_cam->lock, flags);
vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
/**
* __vb2_perform_fileio() - perform a single file io (read or write) operation
* @q: videobuf2 queue
* @data: pointed to target userspace buffer
* @count: number of bytes to read or write
* @ppos: file handle position tracking pointer
* @nonblock: mode selector (1 means blocking calls, 0 means nonblocking)
* @read: access mode selector (1 means read, 0 means write)
*/
static size_t __vb2_perform_fileio(struct vb2_queue *q, char __user *data, size_t count,
loff_t *ppos, int nonblock, int read)
{
struct vb2_fileio_data *fileio;
struct vb2_fileio_buf *buf;
bool is_multiplanar = q->is_multiplanar;
/*
* When using write() to write data to an output video node the vb2 core
* should set timestamps if V4L2_BUF_FLAG_TIMESTAMP_COPY is set. Nobody
* else is able to provide this information with the write() operation.
*/
bool set_timestamp = !read &&
(q->timestamp_flags & V4L2_BUF_FLAG_TIMESTAMP_MASK) ==
V4L2_BUF_FLAG_TIMESTAMP_COPY;
int ret, index;
dprintk(3, "mode %s, offset %ld, count %zd, %sblocking\n",
read ? "read" : "write", (long)*ppos, count,
nonblock ? "non" : "");
if (!data)
return -EINVAL;
/*
* Initialize emulator on first call.
*/
if (!vb2_fileio_is_active(q)) {
ret = __vb2_init_fileio(q, read);
dprintk(3, "vb2_init_fileio result: %d\n", ret);
if (ret)
return ret;
}
fileio = q->fileio;
/*
* Check if we need to dequeue the buffer.
*/
index = fileio->cur_index;
if (index >= q->num_buffers) {
/*
* Call vb2_dqbuf to get buffer back.
*/
memset(&fileio->b, 0, sizeof(fileio->b));
fileio->b.type = q->type;
fileio->b.memory = q->memory;
if (is_multiplanar) {
memset(&fileio->p, 0, sizeof(fileio->p));
fileio->b.m.planes = &fileio->p;
fileio->b.length = 1;
}
ret = vb2_internal_dqbuf(q, &fileio->b, nonblock);
dprintk(5, "vb2_dqbuf result: %d\n", ret);
if (ret)
return ret;
fileio->dq_count += 1;
fileio->cur_index = index = fileio->b.index;
buf = &fileio->bufs[index];
/*
* Get number of bytes filled by the driver
*/
buf->pos = 0;
buf->queued = 0;
buf->size = read ? vb2_get_plane_payload(q->bufs[index], 0)
: vb2_plane_size(q->bufs[index], 0);
/* Compensate for data_offset on read in the multiplanar case. */
if (is_multiplanar && read &&
fileio->b.m.planes[0].data_offset < buf->size) {
buf->pos = fileio->b.m.planes[0].data_offset;
buf->size -= buf->pos;
}
} else {
buf = &fileio->bufs[index];
}
/*
* Limit count on last few bytes of the buffer.
*/
if (buf->pos + count > buf->size) {
count = buf->size - buf->pos;
dprintk(5, "reducing read count: %zd\n", count);
}
/*
* Transfer data to userspace.
*/
dprintk(3, "copying %zd bytes - buffer %d, offset %u\n",
count, index, buf->pos);
if (read)
ret = copy_to_user(data, buf->vaddr + buf->pos, count);
else
ret = copy_from_user(buf->vaddr + buf->pos, data, count);
if (ret) {
dprintk(3, "error copying data\n");
return -EFAULT;
}
/*
* Update counters.
*/
buf->pos += count;
*ppos += count;
/*
* Queue next buffer if required.
*/
if (buf->pos == buf->size || (!read && fileio->write_immediately)) {
/*
* Check if this is the last buffer to read.
*/
if (read && fileio->read_once && fileio->dq_count == 1) {
dprintk(3, "read limit reached\n");
return __vb2_cleanup_fileio(q);
}
/*
* Call vb2_qbuf and give buffer to the driver.
*/
memset(&fileio->b, 0, sizeof(fileio->b));
fileio->b.type = q->type;
fileio->b.memory = q->memory;
fileio->b.index = index;
fileio->b.bytesused = buf->pos;
if (is_multiplanar) {
memset(&fileio->p, 0, sizeof(fileio->p));
fileio->p.bytesused = buf->pos;
fileio->b.m.planes = &fileio->p;
fileio->b.length = 1;
}
if (set_timestamp)
v4l2_get_timestamp(&fileio->b.timestamp);
ret = vb2_internal_qbuf(q, &fileio->b);
dprintk(5, "vb2_dbuf result: %d\n", ret);
if (ret)
return ret;
/*
* Buffer has been queued, update the status
*/
buf->pos = 0;
buf->queued = 1;
buf->size = vb2_plane_size(q->bufs[index], 0);
fileio->q_count += 1;
/*
* If we are queuing up buffers for the first time, then
* increase initial_index by one.
*/
if (fileio->initial_index < q->num_buffers)
fileio->initial_index++;
/*
* The next buffer to use is either a buffer that's going to be
* queued for the first time (initial_index < q->num_buffers)
* or it is equal to q->num_buffers, meaning that the next
* time we need to dequeue a buffer since we've now queued up
* all the 'first time' buffers.
*/
fileio->cur_index = fileio->initial_index;
}
/*
* Return proper number of bytes processed.
*/
if (ret == 0)
ret = count;
return ret;
}
