int mdnie_send_sequence(struct mdnie_info *mdnie, const unsigned char *seq)
{
int ret = 0, i = 0;
const unsigned short *wbuf;
if (IS_ERR_OR_NULL(seq)) {
dev_err(mdnie->dev, "mdnie sequence is null\n");
return -EPERM;
}
if(MDNIE_SUSPEND == mdnie_status)
return -EPERM;
mutex_lock(&mdnie->dev_lock);
printk(" %s write sequence START\n", __func__);
#if defined(CONFIG_MACH_CAPRI_SS_CRATER)
ret = vc_display_bus_write(0,0xB9,cabc_on00,3); // test
ret = vc_display_bus_write(0,0xCD,seq,112);
#else
ret = vc_display_bus_write(0,0xE6,seq,112);
#endif
printk(" %s write sequence ret = %d END\n", __func__, ret);
mutex_unlock(&mdnie->dev_lock);
return ret;
}
static int ldi_cabc_on(void)
{
int ret = 0;
ret = vc_display_bus_write(0,0xB9,cabc_on00,3);
ret = vc_display_bus_write(0,0xC9,cabc_on01,2);
ret = vc_display_bus_write(0,0x51,cabc_on02,2);
ret = vc_display_bus_write(0,0x53,cabc_on03,2);
ret = vc_display_bus_write(0,0x55,cabc_ui,2);
mdelay(5);
return ret;
}
static void ktd259b_backlight_earlyresume(struct early_suspend *desc)
{
struct ktd259b_bl_data *ktd259b = container_of(desc, struct ktd259b_bl_data,
early_suspend_desc);
struct backlight_device *bl = platform_get_drvdata(ktd259b->pdev);
struct timespec ts;
struct rtc_time tm;
#ifdef PWM_BRIGHTNESS
int temp_brightness = 0;
#endif
gpio_set_value(backlight_pwm,1);
#ifdef PWM_BRIGHTNESS
vc_display_bus_write(0,0x51,&temp_brightness,1);
mdelay(100);
lcd_backlight_control(5);
#endif
getnstimeofday(&ts);
rtc_time_to_tm(ts.tv_sec, &tm);
backlight_mode=BACKLIGHT_RESUME;
if(cabc_status)
{
backlight_cabc_on();
}
else
{
backlight_cabc_off();
}
printk("[%02d:%02d:%02d.%03lu][BACKLIGHT] earlyresume\n", tm.tm_hour, tm.tm_min, tm.tm_sec, ts.tv_nsec);
backlight_update_status(bl);
}
static int ldi_cabc_off(void)
{
int ret = 0;
ret = vc_display_bus_write(0,0x55,cabc_off,1);
mdelay(5);
return ret;
}
void mdnie_late_resume(struct early_suspend *h)
{
u32 i, conversion;
struct mdnie_info *mdnie = container_of(h, struct mdnie_info, early_suspend);
#if defined(CONFIG_FB_MDNIE_PWM)
struct lcd_platform_data *pd = NULL;
dev_info(mdnie->dev, "+%s\n", __func__);
pd = mdnie->lcd_pd;
if (mdnie->enable)
mdnie_pwm_control(mdnie, 0);
if (!pd)
dev_info(&mdnie->bd->dev, "platform data is NULL.\n");
if (!pd->power_on)
dev_info(&mdnie->bd->dev, "power_on is NULL.\n");
else
pd->power_on(NULL, 1);
if (mdnie->enable) {
dev_info(&mdnie->bd->dev, "brightness=%d\n", mdnie->bd->props.brightness);
update_brightness(mdnie);
}
mdnie->bd_enable = TRUE;
dev_info(mdnie->dev, "-%s\n", __func__);
#endif
printk("[mdnie] %s \n", __func__);
mdnie_status = MDNIE_RESUME;
for (i = 0; i < 5; i++) {
if (negative[i].enable){
dev_info(mdnie->dev, "pid=%d, %s, %s\n", negative[i].pid, negative[i].comm, negative[i].time);
mdnie->negative = NEGATIVE_ON;
}
}
//if(NEGATIVE_ON == mdnie->negative)
mdelay(110);
set_cabc_value(mdnie, 0);
set_mdnie_value(mdnie, 0);
//if(NEGATIVE_ON == mdnie->negative)
mdelay(30);
#if LCD_LOW_TEMP_CONVERSION
if(lcd_panel_id == LCD_PANEL_DTC){
if( -50 < get_temp_from_ps_battery()){
conversion = 0x02;
}else{
conversion = 0x01;
}
}else{
if( -50 < get_temp_from_ps_battery()){
conversion = 0x02;
}else{
conversion = 0x01;
}
}
vc_display_bus_write(0,0xB4,&conversion,1);
#endif
return ;
}
/* input: intensity in percentage 0% - 100% */
static int ktd259b_backlight_update_status(struct backlight_device *bd)
{
int user_intensity = bd->props.brightness;
int tune_level = 0;
int pulse;
int i;
BLDBG("[BACKLIGHT] ktd259b_backlight_update_status ==> user_intensity : %d\n", user_intensity);
g_bl.props.brightness = user_intensity;
current_intensity = user_intensity;
if(backlight_mode==BACKLIGHT_RESUME){
#ifdef PWM_BRIGHTNESS
return vc_display_bus_write(0,0x51,&user_intensity,1);
#endif
if(user_intensity > 0) {
if(user_intensity < MIN_BRIGHTNESS_VALUE) {
tune_level = DIMMING_VALUE; /* DIMMING */
}else if (user_intensity == MAX_BRIGHTNESS_VALUE) {
if(cabc_status){
tune_level = brt_table_ktd_cabc[MAX_BRT_STAGE_KTD_CABC-1].tune_level;
}else{
tune_level = brt_table_ktd[MAX_BRT_STAGE_KTD-1].tune_level;
}
}else{
if(cabc_status){
BLDBG("[BACKLIGHT] cabc ON!\n");
for(i = 0; i < MAX_BRT_STAGE_KTD_CABC; i++) {
if(user_intensity <= brt_table_ktd_cabc[i].level ) {
tune_level = brt_table_ktd_cabc[i].tune_level;
break;
}
}
}else{
BLDBG("[BACKLIGHT] cabc OFF!\n");
for(i = 0; i < MAX_BRT_STAGE_KTD; i++) {
if(user_intensity <= brt_table_ktd[i].level ) {
tune_level = brt_table_ktd[i].tune_level;
break;
}
}
}
}
}
if (real_level==tune_level){
return 0;
}else{
if(tune_level<=0){
gpio_set_value(backlight_pin,0);
mdelay(3);
}else{
if( real_level<=tune_level){
pulse = tune_level - real_level;
}else{
pulse = 32 - (real_level - tune_level);
}
if (pulse==0){
return 0;
}
BLDBG("[BACKLIGHT] ktd259b_backlight_update_status ==> tune_level : %d & pulse = %d\n", tune_level, pulse);
lcd_backlight_control(pulse);
}
real_level = tune_level;
return 0;
}
}
return 0;
}
