static void ast_vibrator_enable(struct timed_output_dev *dev, int value)
{
haptic_vibrator->timeout = value;
if (IS_ERR(haptic_vibrator->pwm)) {
printk("haptic_vibrator->pwm error\n");
return ;
}
if(pwm_duty_val != 1)
{
haptic_vibrator->duty_cycle=pwm_duty_val;
}
if (haptic_vibrator->on_dock == false) {
pwm_config(haptic_vibrator->pwm, haptic_vibrator->duty_cycle,
haptic_vibrator->pwm_period);
pwm_enable(haptic_vibrator->pwm);
vibrator_enable();
msleep(value);
}
vibrator_disable();
vibrator_disable_pwm();
return;
}
/* Called to enable amp (enable output force) */
IMMVIBESPIAPI VibeStatus ImmVibeSPI_ForceOut_AmpEnable( VibeUInt8 nActuatorIndex )
{
if (haptic_vibrator->on_dock == true) {
vibrator_disable();
vibrator_disable_pwm();
return VIBE_S_SUCCESS;
}
if (haptic_vibrator->amp_enabled == false) {
DbgOut((DBL_VERBOSE, "[ImmVibeSPI] : ImmVibeSPI_ForceOut_AmpEnable\n"));
vibrator_enable_pwm();
vibrator_enable();
}
return VIBE_S_SUCCESS;
}
void msm_timed_vibrate(int value) {
vibrator_enable(0,value);
}
// at_param shall be ONLY INTERGER, do not (float / pointer / string...)
static int dsatHandleAT_ARM11(uint32_t at_cmd, uint32_t at_act, uint32_t at_param,struct msm_rpc_server *server)
{
int result = HANDLE_OK;
#ifdef USE_REPLY_RETSTRING
int loop = 0;
#endif
char ret_string[MAX_STRING_RET];
uint32_t ret_value1 =0;
uint32_t ret_value2 = 0;
memset (ret_string, 0, sizeof(ret_string));
switch (at_cmd)
{
// example code
case ATCMD_FRST:
{
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
sprintf(ret_string, "edcb");
ret_value1 = 10;
ret_value2 = 20;
}
break;
case ATCMD_SWV:
{
}
break;
case ATCMD_AVR: /* 45 */
{
//printk("#### ATCMD_AVR ###### Act: 0x%x, Param: 0x%x\n", at_act, at_param);
printk("\n[kschoi] ***** ATCMD_AVR key = %d : rpc_server_misc.c",at_param);
lge_atcmd_report_key(1, at_param);
}
break;
case ATCMD_EMT: //46
{
ret_value1 = external_memory_test();
}
break;
case ATCMD_NOT_ATMCD_EARSENSE:
{
printk(" ****************** ATCMD_NOT_ATMCD_EARSENSE ****************** \n");
printk(" ****************** headset_inserted [%d] ****************** \n",headset_inserted);
ret_value1 = headset_inserted;
break;
}
case ATCMD_FRSTSTATUS:
if ( at_act == ATCMD_ACTION )
ret_value1 = set_kernel_factory_reset_status(at_param);
else
ret_value1 = get_kernel_factory_reset_status();
break;
case ATCMD_MOT: // 71
{
#if 1 // def CONFIG_ANDROID_VIBRATOR
if (at_act == ATCMD_ACTION){
ret_value1 = is_vib_state(); // Check vibrator state
}
else if (at_act == ATCMD_ASSIGN) {
if (at_param== 1) {
// vibrator_set(100);
vibrator_enable(); // Enable vibrator
ret_value1 = 1; // "MOTOR ON"
}
else {
vibrator_disable(); // Disabe vibrator
printk("#### ATCMD_MOT 0###### Act: 0x%x, Param: 0x%x\n", at_act, at_param);
ret_value1 = 0; // "MOTOR OFF"
}
}
else
#endif
{
result = HANLDE_FAIL;
}
}
break;
case ATCMD_FKPD: // 33
{
if (at_act == ATCMD_ASSIGN) {
ret_value1 = 1;
at_fkpd_cfg(1/*ENABLE FKPD KEY INPUT*/, at_param/*AT INPUT KEY VALUE*/);
}
else if (at_act == ATCMD_QUERY){ //JUST RETURN OK
ret_value1 = 1;
}
else {
result = HANLDE_FAIL;
}
}
break;
case ATCMD_GKPD: // 34
{
if (at_act == ATCMD_ACTION) {
ret_value1 = at_gkpd_cfg(0/* 0 = READ GKPD*/,0/* READ GKPD STATE*/); //READ GKPD STATE
}
else if (at_act == ATCMD_ASSIGN) {
if (at_param== 1)
{
at_gkpd_cfg(1/*WRITE GKPD*/,1/*WRITE TO SET GKPD BUFF*/); //SET GKPD STATE
ret_value1 = 1; // "GKPD ON"
}
else {
at_gkpd_cfg(1/*WRITE GKPD*/,0/*DISABLE GKPD BUFF*/); //DISABLE GKPD STATE
ret_value1 = 0; // "GKPD OFF"
}
}
else if (at_act == ATCMD_QUERY) {
ret_value1 = at_gkpd_cfg(0/*READ GKPD*/,1/*READ GKPD BUUFERED VALUE*/); //READ A GKPD BUUFER VALUE
}
else {
result = HANLDE_FAIL;
}
}
break;
case ATCMD_BOFF: // 58
{
// To use AT%LCD, uncomment this.
#if defined(CONFIG_MACH_MSM7X27_SWIFT)
int fd;
char buf = '0';
mm_segment_t oldfs;
oldfs = get_fs();
set_fs(get_ds());
fd = sys_open((const char __user *) "/sys/devices/virtual/backlight/rt9393/brightness", O_WRONLY | O_CREAT | O_TRUNC, 0777);
if (fd < 0) {
break;
}
sys_write(fd, &buf, sizeof(char));
sys_close(fd);
set_fs(oldfs);
#endif
#ifdef CONFIG_BACKLIGHT_EVE
lge_atcmd_boff();
#endif
ret_value1 = 1;
}
break;
case ATCMD_FC: // 59
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
#ifdef CONFIG_ANDROID_HALL_IC
if (is_slide_open()== 0)
{
set_slide_open(1); // close slide
ret_value1 = 1; // "FOLDER CLOSE OK"
}
else
{
ret_value1 = 0; // "FOLDER IS ALREADY CLOSED"
}
#endif
break;
case ATCMD_FO: // 60
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
#ifdef CONFIG_ANDROID_HALL_IC
if (is_slide_open() == 0)
{
ret_value1 = 1; // "FOLDER IS ALREADY OPEN"
}
else
{
set_slide_open(0); // open slide
ret_value1 = 0; // "FOLDER OPEN OK"
}
#endif
break;
#if 1 // defined (CONFIG_MACH_EVE)-comment
case ATCMD_VLC: //36
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
if (atpdev != NULL){
update_atcmd_state(atpdev, "vlc", at_param); //state is up? down?
}
else
{
printk("\n[%s] error vlc", __func__ );
}
break;
case ATCMD_SPM: //40
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
if (atpdev != NULL){
update_atcmd_state(atpdev, "spm", at_param); //state is up? down?
}
else
{
printk("\n[%s] error spm", __func__ );
}
break;
case ATCMD_ACS:
if ( at_param != 0 )
mdelay(1000);
break;
case ATCMD_MPT: //43
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
if (atpdev != NULL){
update_atcmd_state(atpdev, "mpt", at_param); //state is up? down?
mdelay (1000);
}
else
{
printk("\n[%s] error mpt", __func__ );
}
break;
case ATCMD_FMR: //42
printk("\n[rpc_server_misc] ATCMD_FMR");
if(at_act != ATCMD_ACTION)
result = HANLDE_FAIL;
if (atpdev != NULL){
update_atcmd_state(atpdev, "fmr", at_param); //state is up? down?
}
else
{
printk("\n[%s] error fmr", __func__ );
}
break;
#endif
case ATCMD_LCD: /* 69 */
{
// To use AT%LCD, uncomment this.
lge_atcmd_report_key(ATCMD_LCD_REPORTKEY, at_param);
ret_value1 = 1;
}
break;
case ATCMD_CAM: /* 70 */
{
//printk("#### ATCMD_CAM ###### Act: 0x%x, Param: 0x%x\n", at_act, at_param);
printk("\n[kschoi] ***** ATCMD_CAM key = %d: rpc_server_misc.c",at_param);
lge_atcmd_report_key(0, at_param);
}
break;
default :
result = HANDLE_ERROR;
break;
}
// give to RPC server result
/////////////////////////////////////////////////////////////////
#ifdef USE_REPLY_RETSTRING
for(loop = 0; loop < MAX_STRING_RET ; loop++)
{
server->retvalue.ret_string[loop]= (AT_STR_t)(ret_string[loop]);
}
server->retvalue.ret_string[MAX_STRING_RET-1] = 0;
server->retvalue.ret_value1 = ret_value1;
server->retvalue.ret_value2 = ret_value2;
#endif
/////////////////////////////////////////////////////////////////
return result;
}
void custom_vibration_enable(int value)
{
vibrator_enable(&mtk_vibrator,value);
}
int plat_vibrator_enable(int enable)
{
return vibrator_enable(&(vib_data), enable);
}
static int vibrator_probe(struct platform_device *pdev)
{
struct pwm_vib_platform_data *pdata = pdev->dev.platform_data;
struct pwm_vib_data *data;
int ret = 0;
if (!pdata) {
ret = -EBUSY;
goto err0;
}
data = kzalloc(sizeof(struct pwm_vib_data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
goto err0;
}
data->pdata = pdata;
INIT_WORK(&data->vibrator_work, update_vibrator);
vibe_timer_state = 0;
hrtimer_init(&data->vibe_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
data->vibe_timer.function = vibrator_timer_func;
spin_lock_init(&data->vibe_lock);
spin_lock_init(&vibe__timer_lock);
data->dev.name = "vibrator";
data->dev.get_time = vibrator_get_time;
data->dev.enable = vibrator_enable;
pwm_timer = omap_dm_timer_request_specific(MOTOR_RESONANCE_TIMER_ID);
if (pwm_timer == NULL) {
pr_err(KERN_ERR "failed to request vibrator pwm timer\n");
goto err1;
}
/* omap_dm_timer_request_specific enables the timer */
// dm timer failed to be disabled.
// omap_dm_timer_disable(pwm_timer);
omap_dm_timer_set_source(pwm_timer, MOTOR_RESONANCE_SRC_CLK);
// dm timer should be disabled here.
omap_dm_timer_disable(pwm_timer);
ret = timed_output_dev_register(&data->dev);
if (ret < 0)
goto err1;
if (data->pdata->init) {
ret = data->pdata->init();
if (ret < 0)
goto err2;
}
gpio_request(GPIO_VIB_EN, "vib_en_gpio");
gpio_direction_output(GPIO_VIB_EN, 1);
gpio_set_value(GPIO_VIB_EN, 0);
misc_data= data;
platform_set_drvdata(pdev, data);
vibrator_enable(&data->dev, data->pdata->initial_vibrate);
pr_info("COSMO vibrator is initialized\n");
return 0;
err2:
timed_output_dev_unregister(&data->dev);
err1:
kfree(data->pdata);
kfree(data);
err0:
return ret;
}
