/* Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
glClearColor(.2,.2,.2,0); // set clear color to grey
// Clear the screen to black, clear the depth buffer
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Get the frustum information which will be later used to generate a perspective projection matrix. */
float f[6]; // left, right, top, bottom, near>0, far>0
projmat_get_frustum(f, viewport[2], viewport[3]);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16];
viewmat_get(viewMat, f, viewportID);
/* Create a 4x4 perspective projection matrix from the frustum values. */
float perspective[16];
mat4f_frustum_new(perspective,f[0], f[1], f[2], f[3], f[4], f[5]);
/* Calculate an angle to rotate the
* object. glutGet(GLUT_ELAPSED_TIME) is the number of
* milliseconds since glutInit() was called. */
int count = glutGet(GLUT_ELAPSED_TIME) % 10000; // get a counter that repeats every 10 seconds
float angle = count / 10000.0 * 360; // rotate 360 degrees every 10 seconds
/* Make sure all computers/processes use the same angle */
dgr_setget("angle", &angle, sizeof(GLfloat));
/* Create a 4x4 rotation matrix based on the angle we computed. */
float rotateMat[16];
mat4f_rotateAxis_new(rotateMat, angle, 0,1,0);
/* Create a scale matrix. */
float scaleMatrix[16];
mat4f_scale_new(scaleMatrix, 3, 3, 3);
// Modelview = (viewMatrix * scaleMatrix) * rotationMatrix
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, scaleMatrix);
mat4f_mult_mat4f_new(modelview, modelview, rotateMat);
kuhl_errorcheck();
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
kuhl_errorcheck();
/* Draw the geometry using the matrices that we sent to the
* vertex programs immediately above */
kuhl_geometry_draw(&triangle);
kuhl_geometry_draw(&quad);
glUseProgram(0); // stop using a GLSL program.
} // finish viewport loop
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
/* Display the buffer we just drew (necessary for double buffering). */
glutSwapBuffers();
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
/* Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Turn on blending (note, if you are using transparent textures,
the transparency may not look correct unless you draw further
items before closer items. This program always draws the
geometry in the same order.). */
glEnable(GL_BLEND);
glBlendEquationSeparate(GL_FUNC_ADD, GL_FUNC_ADD);
glBlendFuncSeparate(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_ONE, GL_ZERO);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_get(viewMat, perspective, viewportID);
/* Calculate an angle to rotate the
* object. glutGet(GLUT_ELAPSED_TIME) is the number of
* milliseconds since glutInit() was called. */
int count = glutGet(GLUT_ELAPSED_TIME) % 10000; // get a counter that repeats every 10 seconds
float angle = count / 10000.0 * 360; // rotate 360 degrees every 10 seconds
/* Make sure all computers/processes use the same angle */
dgr_setget("angle", &angle, sizeof(GLfloat));
/* Create a 4x4 rotation matrix based on the angle we computed. */
float rotateMat[16];
mat4f_rotateAxis_new(rotateMat, angle, 0,1,0);
/* Create a scale matrix. */
float scaleMatrix[16];
mat4f_scale_new(scaleMatrix, 3, 3, 3);
// Modelview = (viewMatrix * scaleMatrix) * rotationMatrix
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, scaleMatrix);
mat4f_mult_mat4f_new(modelview, modelview, rotateMat);
kuhl_errorcheck();
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
kuhl_errorcheck();
/* Draw the geometry using the matrices that we sent to the
* vertex programs immediately above */
kuhl_geometry_draw(&triangle);
} // finish viewport loop
viewmat_end_frame();
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
/* Get current frames per second calculations. */
float fps = kuhl_getfps(&fps_state);
if(dgr_is_enabled() == 0 || dgr_is_master())
{
// If DGR is being used, only display dgr counter if we are
// the master process.
// Check if FPS value was just updated by kuhl_getfps()
if(fps_state.frame == 0)
{
char label[1024];
snprintf(label, 1024, "FPS: %0.1f", fps);
/* Delete old label if it exists */
if(fpsLabel != 0)
glDeleteTextures(1, &fpsLabel);
/* Make a new label */
float labelColor[3] = { 1,1,1 };
float labelBg[4] = { 0,0,0,.3 };
/* Change the last parameter (point size) to adjust the
* size of the texture that the text is rendered in to. */
fpsLabelAspectRatio = kuhl_make_label(label,
&fpsLabel,
labelColor, labelBg, 24);
if(fpsLabel != 0)
kuhl_geometry_texture(&labelQuad, fpsLabel, "tex", 1);
}
}
/* Ensure the slaves use the same render style as the master
* process. */
dgr_setget("style", &renderStyle, sizeof(int));
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Turn on blending (note, if you are using transparent textures,
the transparency may not look correct unless you draw further
items before closer items.). */
glEnable(GL_BLEND);
glBlendEquationSeparate(GL_FUNC_ADD, GL_FUNC_ADD);
glBlendFuncSeparate(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_ONE, GL_ZERO);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_get(viewMat, perspective, viewportID);
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
float modelMat[16];
get_model_matrix(modelMat);
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, modelMat); // modelview = view * model
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
glUniform1i(kuhl_get_uniform("renderStyle"), renderStyle);
// Copy far plane value into vertex program so we can render depth buffer.
float f[6]; // left, right, bottom, top, near>0, far>0
projmat_get_frustum(f, viewport[2], viewport[3]);
glUniform1f(kuhl_get_uniform("farPlane"), f[5]);
kuhl_errorcheck();
kuhl_geometry_draw(modelgeom); /* Draw the model */
kuhl_errorcheck();
if(showOrigin)
{
/* Save current line width */
GLfloat origLineWidth;
glGetFloatv(GL_LINE_WIDTH, &origLineWidth);
glLineWidth(4); // make lines thick
/* Object coordinate system origin */
kuhl_geometry_draw(origingeom); /* Draw the origin marker */
/* World coordinate origin */
mat4f_copy(modelview, viewMat);
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
kuhl_geometry_draw(origingeom); /* Draw the origin marker */
/* Restore line width */
glLineWidth(origLineWidth);
}
if(dgr_is_enabled() == 0 || dgr_is_master())
{
/* The shape of the frames per second quad depends on the
* aspect ratio of the label texture and the aspect ratio of
* the window (because we are placing the quad in normalized
* device coordinates). */
int windowWidth, windowHeight;
viewmat_window_size(&windowWidth, &windowHeight);
float windowAspect = windowWidth / (float)windowHeight;
float stretchLabel[16];
mat4f_scale_new(stretchLabel, 1/8.0 * fpsLabelAspectRatio / windowAspect, 1/8.0, 1);
/* Position label in the upper left corner of the screen */
float transLabel[16];
mat4f_translate_new(transLabel, -.9, .8, 0);
mat4f_mult_mat4f_new(modelview, transLabel, stretchLabel);
glUniformMatrix4fv(kuhl_get_uniform("ModelView"), 1, 0, modelview);
/* Make sure we don't use a projection matrix */
float identity[16];
mat4f_identity(identity);
glUniformMatrix4fv(kuhl_get_uniform("Projection"), 1, 0, identity);
/* Don't use depth testing and make sure we use the texture
* rendering style */
glDisable(GL_DEPTH_TEST);
glUniform1i(kuhl_get_uniform("renderStyle"), 1);
kuhl_geometry_draw(&labelQuad); /* Draw the quad */
glEnable(GL_DEPTH_TEST);
kuhl_errorcheck();
}
glUseProgram(0); // stop using a GLSL program.
} // finish viewport loop
viewmat_end_frame();
/* Update the model for the next frame based on the time. We
* convert the time to seconds and then use mod to cause the
* animation to repeat. */
int time = glutGet(GLUT_ELAPSED_TIME);
dgr_setget("time", &time, sizeof(int));
kuhl_update_model(modelgeom, 0, ((time%10000)/1000.0));
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
//kuhl_video_record("videoout", 30);
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
/* Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Turn on blending (note, if you are using transparent textures,
the transparency may not look correct unless you draw further
items before closer items. This program always draws the
geometry in the same order.). */
glEnable(GL_BLEND);
glBlendEquationSeparate(GL_FUNC_ADD, GL_FUNC_ADD);
glBlendFuncSeparate(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_ONE, GL_ZERO);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_eye eye = viewmat_get(viewMat, perspective, viewportID);
/* Always put camera at origin (no translation, no
* interpupillary distance). */
float noTranslation[4] = {0,0,0,1};
mat4f_setColumn(viewMat, noTranslation, 3); // last column
/* Create a scale matrix. */
float scaleMatrix[16];
mat4f_scale_new(scaleMatrix, 20, 20, 20);
// Modelview = (viewMatrix * scaleMatrix) * rotationMatrix
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, scaleMatrix);
kuhl_errorcheck();
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
kuhl_errorcheck();
if(texIdLeft != 0 && texIdRight != 0) // cylinder
{
/* Draw the cylinder with the appropriate texture */
if(eye == VIEWMAT_EYE_RIGHT)
kuhl_geometry_texture(&cylinder, texIdRight, "tex", KG_WARN);
else
kuhl_geometry_texture(&cylinder, texIdLeft, "tex", KG_WARN);
kuhl_geometry_draw(&cylinder);
}
else // cubemap
{
if(eye == VIEWMAT_EYE_RIGHT)
setupCubemap(cubemapRightTex, quad, modelview);
else
setupCubemap(cubemapLeftTex, quad, modelview);
}
} // finish viewport loop
viewmat_end_frame();
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
static int fps_state_init = 0;
static kuhl_fps_state fps_state;
if(fps_state_init == 0)
{
kuhl_getfps_init(&fps_state);
fps_state_init = 1;
}
float fps = kuhl_getfps(&fps_state);
if(fps_state.frame == 0)
msg(INFO, "fps: %6.1f\n", fps);
}
/* Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right.) */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT|GL_STENCIL_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_get(viewMat, perspective, viewportID);
/* Calculate an angle to rotate the
* object. glutGet(GLUT_ELAPSED_TIME) is the number of
* milliseconds since glutInit() was called. */
int count = glutGet(GLUT_ELAPSED_TIME) % 10000; // get a counter that repeats every 10 seconds
float angle = count / 10000.0 * 360; // rotate 360 degrees every 10 seconds
/* Make sure all computers/processes use the same angle */
dgr_setget("angle", &angle, sizeof(GLfloat));
/* Create a 4x4 rotation matrix based on the angle we computed. */
float rotateMat[16];
mat4f_rotateAxis_new(rotateMat, angle, 0,1,0);
/* Create a scale matrix. */
float scaleMatrix[16];
mat4f_scale_new(scaleMatrix, 3, 3, 3);
// Modelview = (viewMatrix * scaleMatrix) * rotationMatrix
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, scaleMatrix);
mat4f_mult_mat4f_new(modelview, modelview, rotateMat);
kuhl_errorcheck();
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
kuhl_errorcheck();
/* Draw the geometry using the matrices that we sent to the
* vertex programs immediately above. Use the stencil buffer
* to keep track of which object appears on top. */
if(viewportID == 0)
glEnable(GL_STENCIL_TEST);
glStencilOp(GL_KEEP, GL_KEEP, GL_REPLACE);
glStencilFunc(GL_ALWAYS, 1, -1);
kuhl_geometry_draw(&triangle);
glStencilFunc(GL_ALWAYS, 2, -1);
kuhl_geometry_draw(&quad);
glDisable(GL_STENCIL_TEST);
/* If we have multiple viewports, only draw cursor in the
* first viewport. */
if(viewportID == 0)
{
/* Draw the cursor in normalized device coordinates. Don't
* use any matrices. */
float identity[16];
mat4f_identity(identity);
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, 0, identity);
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, 0, identity);
/* Disable depth testing so the cursor isn't occluded by
* anything. */
glDisable(GL_DEPTH_TEST);
kuhl_geometry_draw(&cursor);
glEnable(GL_DEPTH_TEST);
/* When we render images on the Oculus, we are rendering
* into a multisampled framebuffer object, and we can't
* read from the multisample FBO until we have blitted it
* into a normal FBO. Here, we get the blitted FBO for the
* *previous* frame. */
GLint fb =viewmat_get_blitted_framebuffer(viewportID);
glBindFramebuffer(GL_FRAMEBUFFER, fb);
GLuint stencilVal = 0;
kuhl_errorcheck();
glReadPixels(viewport[0]+viewport[2]/2, viewport[1]+viewport[3]/2,
1,1, // get data for 1x1 area (i.e., a pixel)
GL_STENCIL_INDEX, // query the stencil buffer
GL_UNSIGNED_INT,
&stencilVal);
kuhl_errorcheck();
if(stencilVal == 1)
printf("Cursor is on triangle.\n");
else if(stencilVal == 2)
printf("Cursor is on quad.\n");
else
printf("Cursor isn't on anything.\n");
}
glUseProgram(0); // stop using a GLSL program.
} // finish viewport loop
viewmat_end_frame();
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
void display()
{
dgr_update();
dgr_setget("style", &renderStyle, sizeof(int));
// Clear the screen to black, clear the depth buffer
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Turn on blending (note, if you are using transparent textures,
the transparency may not look correct unless you draw further
items before closer items.). */
glEnable(GL_BLEND);
glBlendEquationSeparate(GL_FUNC_ADD, GL_FUNC_ADD);
glBlendFuncSeparate(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_ONE, GL_ZERO);
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Get the frustum information which will be later used to generate a perspective projection matrix. */
float f[6]; // left, right, top, bottom, near>0, far>0
projmat_get_frustum(f, viewport[2], viewport[3]);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16];
viewmat_get(viewMat, f, viewportID);
glUseProgram(program);
/* Communicate matricies to OpenGL */
float perspective[16];
mat4f_frustum_new(perspective,f[0], f[1], f[2], f[3], f[4], f[5]);
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // count
0, // transpose
perspective); // value
float modelMat[16];
get_model_matrix(modelMat);
// modelview = view * model
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, modelMat);
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // count
0, // transpose
modelview); // value
glUniform1i(kuhl_get_uniform("renderStyle"), renderStyle);
// Copy far plane value into vertex program so we can render depth buffer.
glUniform1f(kuhl_get_uniform("farPlane"), f[5]);
kuhl_errorcheck();
kuhl_draw_model_file_ogl3(modelFilename, modelTexturePath, program);
kuhl_errorcheck();
glUseProgram(0); // stop using a GLSL program.
} // finish viewport loop
int time = glutGet(GLUT_ELAPSED_TIME);
float fps = kuhl_getfps(time);
if(time % 1000 == 0)
printf("Frames per second: %0.1f\n", fps);
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
glFlush();
glFinish();
/* Display the buffer we just drew (necessary for double buffering). */
glutSwapBuffers();
// kuhl_video_record("videoout", 30);
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
/** Get a 4x4 view matrix. Some types of systems also need to update
* the frustum based on where the virtual camera is. For example, on
* the IVS display wall, the frustum is adjusted dynamically based on
* where a person is relative to the screens.
*
* @param viewmatrix A 4x4 view matrix for viewmat to fill in.
*
* @param projmatrix A 4x4 projection matrix for viewmat to fill in.
*
* @param viewportID If there is only one viewport, set this to
* 0. This value must be smaller than the value reported by
* viewmat_num_viewports(). In an HMD, typically viewportID=0 is the
* left eye and viewportID=1 is the right eye. However, some Oculus
* HMDs will result in this being swapped. To definitively know which
* eye this view matrix corresponds to, examine the return value of
* this function.
*
* @return A viewmat_eye enum which indicates if this view matrix is
* for the left, right, middle, or unknown eye.
*
*/
viewmat_eye viewmat_get(float viewmatrix[16], float projmatrix[16], int viewportID)
{
viewmat_eye eye = viewmat_viewport_to_eye(viewportID);
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
/* Get the view or camera matrix; update the frustum values if needed. */
float f[6]; // left, right, bottom, top, near>0, far>0
projmat_get_frustum(f, viewport[2], viewport[3], viewportID);
/* If we are running in IVS mode and using the tracking systems,
* all computers need to update their frustum differently. The
* master process will be controlled by VRPN, and all slaves will
* have their controllers set to "none". Here, we detect for this
* situation and make sure all processes work correctly.
*/
if(viewmat_display_mode == VIEWMAT_IVS &&
viewmat_control_mode == VIEWMAT_CONTROL_VRPN)
{
// Will update view matrix and frustum information
viewmat_get_ivs(viewmatrix, f);
mat4f_frustum_new(projmatrix, f[0], f[1], f[2], f[3], f[4], f[5]);
}
else
{
switch(viewmat_control_mode)
{
case VIEWMAT_CONTROL_MOUSE: // mouse movement
viewmat_get_mouse(viewmatrix, viewportID);
mat4f_frustum_new(projmatrix, f[0], f[1], f[2], f[3], f[4], f[5]);
break;
case VIEWMAT_CONTROL_NONE:
// Get the view matrix from the mouse movement code...but
// we haven't registered mouse movement callback
// functions, so mouse movement won't work.
viewmat_get_mouse(viewmatrix, viewportID);
mat4f_frustum_new(projmatrix, f[0], f[1], f[2], f[3], f[4], f[5]);
break;
case VIEWMAT_CONTROL_ORIENT:
viewmat_get_orient_sensor(viewmatrix, viewportID);
mat4f_frustum_new(projmatrix, f[0], f[1], f[2], f[3], f[4], f[5]);
break;
case VIEWMAT_CONTROL_OCULUS:
viewmat_get_hmd_oculus(viewmatrix, projmatrix, viewportID);
// previous function sets projmatrix for us...
break;
case VIEWMAT_CONTROL_VRPN:
viewmat_get_vrpn(viewmatrix, viewportID);
mat4f_frustum_new(projmatrix, f[0], f[1], f[2], f[3], f[4], f[5]);
break;
default:
msg(MSG_FATAL, "Unknown viewmat control mode: %d\n", viewmat_control_mode);
exit(EXIT_FAILURE);
}
}
/* Send the view matrix to DGR. At some point in the future, we
* may have multiple computers using different view matrices. For
* now, even in IVS mode, all processes will use the same view
* matrix (IVS uses different view frustums per process). */
char dgrkey[128];
snprintf(dgrkey, 128, "!!viewmat%d", viewportID);
dgr_setget(dgrkey, viewmatrix, sizeof(float)*16);
/* Sanity checks */
viewmat_validate_ipd(viewmatrix, viewportID);
return eye;
}
/* Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_get(viewMat, perspective, viewportID);
/* Calculate an angle to rotate the
* object. glutGet(GLUT_ELAPSED_TIME) is the number of
* milliseconds since glutInit() was called. */
int count = glutGet(GLUT_ELAPSED_TIME) % 10000; // get a counter that repeats every 10 seconds
float angle = count / 10000.0 * 360; // rotate 360 degrees every 10 seconds
/* Make sure all computers/processes use the same angle */
dgr_setget("angle", &angle, sizeof(GLfloat));
/* Create a 4x4 rotation matrix based on the angle we computed. */
float rotateMat[16];
mat4f_rotateAxis_new(rotateMat, angle, 0,1,0);
/* Create a scale matrix. */
float scaleMatrix[16];
mat4f_scale_new(scaleMatrix, 3, 3, 3);
// Modelview = (viewMatrix * scaleMatrix) * rotationMatrix
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, scaleMatrix);
mat4f_mult_mat4f_new(modelview, modelview, rotateMat);
kuhl_errorcheck();
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
kuhl_errorcheck();
/* Setup prerender directly to texture once (and reuse the
* framebuffer object for subsequent draw commands). */
if(prerenderFrameBuffer == 0)
{
#if USE_MSAA==1
/* Generate a MSAA framebuffer + texture */
GLuint prerenderTexIDAA;
prerenderFrameBufferAA = kuhl_gen_framebuffer_msaa(viewport[2], viewport[3],
&prerenderTexIDAA,
NULL, 16);
#endif
prerenderFrameBuffer = kuhl_gen_framebuffer(viewport[2], viewport[3],
&prerenderTexID,
NULL);
/* Apply the texture to our geometry and draw the quad. */
kuhl_geometry_texture(&prerendQuad, prerenderTexID, "tex", 1);
}
/* Switch to framebuffer and set the OpenGL viewport to cover
* the entire framebuffer. */
#if USE_MSAA==1
glBindFramebuffer(GL_FRAMEBUFFER, prerenderFrameBufferAA);
#else
glBindFramebuffer(GL_FRAMEBUFFER, prerenderFrameBuffer);
#endif
glViewport(0,0,viewport[2], viewport[3]);
kuhl_errorcheck();
/* Clear the framebuffer and the depth buffer. */
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
/* Draw the geometry using the matrices that we sent to the
* vertex programs immediately above */
kuhl_geometry_draw(&triangle);
kuhl_geometry_draw(&quad);
/* Stop rendering to texture */
glBindFramebuffer(GL_FRAMEBUFFER, 0);
glUseProgram(0);
kuhl_errorcheck();
#if USE_MSAA==1
/* Copy the MSAA framebuffer into the normal framebuffer */
glBindFramebuffer(GL_READ_FRAMEBUFFER, prerenderFrameBufferAA);
glBindFramebuffer(GL_DRAW_FRAMEBUFFER, prerenderFrameBuffer);
glBlitFramebuffer(0,0,viewport[2],viewport[3],
0,0,viewport[2],viewport[3],
GL_COLOR_BUFFER_BIT, GL_NEAREST);
glBindFramebuffer(GL_READ_FRAMEBUFFER,0);
glBindFramebuffer(GL_DRAW_FRAMEBUFFER,0);
kuhl_errorcheck();
#endif
/* Set up the viewport to draw on the screen */
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
kuhl_geometry_draw(&prerendQuad);
} // finish viewport loop
viewmat_end_frame();
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
/** Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
/* Get current frames per second calculations. */
float fps = kuhl_getfps(&fps_state);
if(dgr_is_enabled() == 0 || dgr_is_master())
{
// If DGR is being used, only display dgr counter if we are
// the master process.
// Check if FPS value was just updated by kuhl_getfps()
if(fps_state.frame == 0)
msg(INFO, "FPS: %0.1f", fps);
}
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Turn on blending (note, if you are using transparent textures,
the transparency may not look correct unless you draw further
items before closer items.). */
glEnable(GL_BLEND);
glBlendEquationSeparate(GL_FUNC_ADD, GL_FUNC_ADD);
glBlendFuncSeparate(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_ONE, GL_ZERO);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_get(viewMat, perspective, viewportID);
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
for(int i=1; i<global_argc; i++)
drawObject(i, viewMat);
glUseProgram(0); // stop using a GLSL program.
} // finish viewport loop
viewmat_end_frame();
/* Update the model for the next frame based on the time. We
* convert the time to seconds and then use mod to cause the
* animation to repeat. */
int time = glutGet(GLUT_ELAPSED_TIME);
dgr_setget("time", &time, sizeof(int));
kuhl_update_model(modelgeom, 0, ((time%10000)/1000.0));
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
//kuhl_video_record("videoout", 30);
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}
/* Called by GLUT whenever the window needs to be redrawn. This
* function should not be called directly by the programmer. Instead,
* we can call glutPostRedisplay() to request that GLUT call display()
* at some point. */
void display()
{
/* If we are using DGR, send or receive data to keep multiple
* processes/computers synchronized. */
dgr_update();
dgr_setget("style", &renderStyle, sizeof(int));
/* Render the scene once for each viewport. Frequently one
* viewport will fill the entire screen. However, this loop will
* run twice for HMDs (once for the left eye and once for the
* right. */
viewmat_begin_frame();
for(int viewportID=0; viewportID<viewmat_num_viewports(); viewportID++)
{
viewmat_begin_eye(viewportID);
/* Where is the viewport that we are drawing onto and what is its size? */
int viewport[4]; // x,y of lower left corner, width, height
viewmat_get_viewport(viewport, viewportID);
glViewport(viewport[0], viewport[1], viewport[2], viewport[3]);
/* Clear the current viewport. Without glScissor(), glClear()
* clears the entire screen. We could call glClear() before
* this viewport loop---but on order for all variations of
* this code to work (Oculus support, etc), we can only draw
* after viewmat_begin_eye(). */
glScissor(viewport[0], viewport[1], viewport[2], viewport[3]);
glEnable(GL_SCISSOR_TEST);
glClearColor(.2,.2,.2,0); // set clear color to grey
glClear(GL_COLOR_BUFFER_BIT|GL_DEPTH_BUFFER_BIT);
glDisable(GL_SCISSOR_TEST);
glEnable(GL_DEPTH_TEST); // turn on depth testing
kuhl_errorcheck();
/* Turn on blending (note, if you are using transparent textures,
the transparency may not look correct unless you draw further
items before closer items.). */
glEnable(GL_BLEND);
glBlendEquationSeparate(GL_FUNC_ADD, GL_FUNC_ADD);
glBlendFuncSeparate(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA, GL_ONE, GL_ZERO);
/* Get the view or camera matrix; update the frustum values if needed. */
float viewMat[16], perspective[16];
viewmat_get(viewMat, perspective, viewportID);
glUseProgram(program);
kuhl_errorcheck();
/* Send the perspective projection matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("Projection"),
1, // number of 4x4 float matrices
0, // transpose
perspective); // value
float modelMat[16];
get_model_matrix(modelMat);
float modelview[16];
mat4f_mult_mat4f_new(modelview, viewMat, modelMat); // modelview = view * model
/* Send the modelview matrix to the vertex program. */
glUniformMatrix4fv(kuhl_get_uniform("ModelView"),
1, // number of 4x4 float matrices
0, // transpose
modelview); // value
glUniform1i(kuhl_get_uniform("renderStyle"), renderStyle);
// Copy far plane value into vertex program so we can render depth buffer.
float f[6]; // left, right, bottom, top, near>0, far>0
projmat_get_frustum(f, viewport[2], viewport[3]);
glUniform1f(kuhl_get_uniform("farPlane"), f[5]);
kuhl_errorcheck();
kuhl_limitfps(60);
update();
kuhl_geometry_draw(modelgeom); /* Draw the model */
kuhl_errorcheck();
glUseProgram(0); // stop using a GLSL program.
} // finish viewport loop
viewmat_end_frame();
/* Check for errors. If there are errors, consider adding more
* calls to kuhl_errorcheck() in your code. */
kuhl_errorcheck();
// kuhl_video_record("videoout", 30);
/* Ask GLUT to call display() again. We shouldn't call display()
* ourselves recursively because it will not leave time for GLUT
* to call other callback functions for when a key is pressed, the
* window is resized, etc. */
glutPostRedisplay();
}