static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
size_t fw_data_len, u32 dest)
{
struct wlcore_partition_set partition;
int addr, chunk_num, partition_limit;
u8 *p, *chunk;
int ret;
/* whal_FwCtrl_LoadFwImageSm() */
wl1271_debug(DEBUG_BOOT, "starting firmware upload");
wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
fw_data_len, CHUNK_SIZE);
if ((fw_data_len % 4) != 0) {
wl1271_error("firmware length not multiple of four");
return -EIO;
}
chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
if (!chunk) {
wl1271_error("allocation for firmware upload chunk failed");
return -ENOMEM;
}
memcpy(&partition, &wl->ptable[PART_DOWN], sizeof(partition));
partition.mem.start = dest;
ret = wlcore_set_partition(wl, &partition);
if (ret < 0)
goto out;
/* 10.1 set partition limit and chunk num */
chunk_num = 0;
partition_limit = wl->ptable[PART_DOWN].mem.size;
while (chunk_num < fw_data_len / CHUNK_SIZE) {
/* 10.2 update partition, if needed */
addr = dest + (chunk_num + 2) * CHUNK_SIZE;
if (addr > partition_limit) {
addr = dest + chunk_num * CHUNK_SIZE;
partition_limit = chunk_num * CHUNK_SIZE +
wl->ptable[PART_DOWN].mem.size;
partition.mem.start = addr;
ret = wlcore_set_partition(wl, &partition);
if (ret < 0)
goto out;
}
/* 10.3 upload the chunk */
addr = dest + chunk_num * CHUNK_SIZE;
p = buf + chunk_num * CHUNK_SIZE;
memcpy(chunk, p, CHUNK_SIZE);
wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
p, addr);
ret = wlcore_write(wl, addr, chunk, CHUNK_SIZE, false);
if (ret < 0)
goto out;
chunk_num++;
}
/* 10.4 upload the last chunk */
addr = dest + chunk_num * CHUNK_SIZE;
p = buf + chunk_num * CHUNK_SIZE;
memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
fw_data_len % CHUNK_SIZE, p, addr);
ret = wlcore_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
out:
kfree(chunk);
return ret;
}
/*
* send command to firmware
*
* @wl: wl struct
* @id: command id
* @buf: buffer containing the command, must work with dma
* @len: length of the buffer
* return the cmd status code on success.
*/
static int __wlcore_cmd_send(struct wl1271 *wl, u16 id, void *buf,
size_t len, size_t res_len)
{
struct wl1271_cmd_header *cmd;
unsigned long timeout;
u32 intr;
int ret;
u16 status;
u16 poll_count = 0;
if (unlikely(wl->state == WLCORE_STATE_RESTARTING &&
id != CMD_STOP_FWLOGGER))
return -EIO;
if (WARN_ON_ONCE(len < sizeof(*cmd)))
return -EIO;
cmd = buf;
cmd->id = cpu_to_le16(id);
cmd->status = 0;
WARN_ON(len % 4 != 0);
WARN_ON(test_bit(WL1271_FLAG_IN_ELP, &wl->flags));
ret = wlcore_write(wl, wl->cmd_box_addr, buf, len, false);
if (ret < 0)
return ret;
/*
* TODO: we just need this because one bit is in a different
* place. Is there any better way?
*/
ret = wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len);
if (ret < 0)
return ret;
timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
if (ret < 0)
return ret;
while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
return -ETIMEDOUT;
}
poll_count++;
if (poll_count < WL1271_CMD_FAST_POLL_COUNT)
udelay(10);
else
msleep(1);
ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
if (ret < 0)
return ret;
}
/* read back the status code of the command */
if (res_len == 0)
res_len = sizeof(struct wl1271_cmd_header);
ret = wlcore_read(wl, wl->cmd_box_addr, cmd, res_len, false);
if (ret < 0)
return ret;
status = le16_to_cpu(cmd->status);
ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
WL1271_ACX_INTR_CMD_COMPLETE);
if (ret < 0)
return ret;
return status;
}
