Exemplo n.º 1
0
void set_time(void) {
  uint8_t mode = init_set_menu(2);

  uint8_t hour, min, sec;
    
  hour = time_h;
  min = time_m;
  sec = time_s;

  while (!check_timeout()) {
    
    if (just_pressed & 0x2) {
      just_pressed = 0;
      screenmutex++;

      if (mode == SET_TIME) {
	DEBUG(putstring("Set time hour"));
	// ok now its selected
	mode = SET_HOUR;
	// display instructions below
        print_menu_opts("change hr","set hour");
      } else if (mode == SET_HOUR) {
	DEBUG(putstring("Set time min"));
	mode = SET_MIN;
	// display instructions below
        print_menu_opts("change min","set mins");
      } else if (mode == SET_MIN) {
	DEBUG(putstring("Set time sec"));
	mode = SET_SEC;
	// display instructions below
        print_menu_opts("change sec","set secs");
      } else {
	// done!
	DEBUG(putstring("done setting time"));
	mode = SET_TIME;
	// display instructions below
	print_menu_advance();
	
	writei2ctime(sec, min, hour, 0, date_d, date_m, date_y);
	time_h = hour;
	time_m = min;
	time_s = sec;
	
      }
      print_time(hour,min,sec,mode);
      screenmutex--;
    }
    // was easter egg
    if ((just_pressed & 0x4) || (pressed & 0x4)) {
      just_pressed = 0;
      screenmutex++;
      if (mode == SET_HOUR) {
	hour = (hour+1) % 24;
	time_h = hour;
      }
      if (mode == SET_MIN) {
	min = (min+1) % 60;
      }
      if (mode == SET_SEC) {
	sec = (sec+1) % 60;
      }
      print_time(hour,min,sec,mode);
      screenmutex--;
      if (pressed & 0x4)
	delay_ms(200);
    }
  }
}
Exemplo n.º 2
0
void set_date(void) {
  uint8_t mode = SET_DATE;
  uint8_t day, month, year;
    
  day = date_d;
  month = date_m;
  year = date_y;

  display_menu();

  screenmutex++;
  // put a small arrow next to 'set date'
  drawArrow(0, 27, MENU_INDENT -1);
  screenmutex--;
  
  timeoutcounter = INACTIVITYTIMEOUT;  

  while (1) {
    if (just_pressed & 0x1) { // mode change
      return;
    }
    if (just_pressed || pressed) {
      timeoutcounter = INACTIVITYTIMEOUT;  
      // timeout w/no buttons pressed after 3 seconds?
    } else if (!timeoutcounter) {
      //timed out!
      displaymode = SHOW_TIME;     
      return;
    }
    if (just_pressed & 0x2) {
      just_pressed = 0;
      screenmutex++;

      if ((mode == SET_DATE) && ((region == REGION_US) || (region == DOW_REGION_US) || (region == DATELONG) || (region == DATELONG_DOW))) {
	DEBUG(putstring("Set date month"));
	// ok now its selected
	mode = SET_MONTH;

	// print the month inverted
	print_date(month,day,year,mode);
	// display instructions below
	displaySetAddress(0, 6);
	displayPutStr("Press + to change mon", NORMAL);
	displaySetAddress(0, 7);
	displayPutStr("Press SET to set mon.", NORMAL);
      } else if ((mode == SET_DATE) && ((region == REGION_EU) || (region == DOW_REGION_EU))) {
	DEBUG(putstring("Set date month"));
	// ok now its selected
	mode = SET_DAY;

	// print the day inverted
	print_date(month,day,year,mode);
	// display instructions below
	displaySetAddress(0, 6);
	displayPutStr("Press + to change day", NORMAL);
	displaySetAddress(0, 7);
	displayPutStr("Press SET to set date", NORMAL);
      } else if ((mode == SET_MONTH) && ((region == REGION_US) || (region == DOW_REGION_US) || (region == DATELONG) || (region == DATELONG_DOW))) {
	DEBUG(putstring("Set date day"));
	mode = SET_DAY;

	print_date(month,day,year,mode);
	// display instructions below
	displaySetAddress(0, 6);
	displayPutStr("Press + to change day", NORMAL);
	displaySetAddress(0, 7);
	displayPutStr("Press SET to set date", NORMAL);
      }else if ((mode == SET_DAY) && ((region == REGION_EU) || (region == DOW_REGION_EU))) {
	DEBUG(putstring("Set date month"));
	mode = SET_MONTH;

	print_date(month,day,year,mode);
	// display instructions below
	displaySetAddress(0, 6);
	displayPutStr("Press + to change mon", NORMAL);
	displaySetAddress(0, 7);
	displayPutStr("Press SET to set mon.", NORMAL);
      } else if ( ((mode == SET_DAY) && ((region == REGION_US) || (region == DOW_REGION_US) || (region == DATELONG) || (region == DATELONG_DOW))) ||
		  ((mode == SET_MONTH) && ((region == REGION_EU) || (region == DOW_REGION_EU))) )  {
	DEBUG(putstring("Set year"));
	mode = SET_YEAR;
	// print the date normal

	print_date(month,day,year,mode);
	// display instructions below
	displaySetAddress(0, 6);
	displayPutStr("Press + to change yr.", NORMAL);
	displaySetAddress(0, 7);
	displayPutStr("Press SET to set year", NORMAL);
      } else {
	// done!
	DEBUG(putstring("done setting date"));
	mode = SET_DATE;
	// print the seconds normal
	print_date(month,day,year,mode);
	// display instructions below
	displaySetAddress(0, 6);
	displayPutStr("Press MENU to advance", NORMAL);
	displaySetAddress(0, 7);
	displayPutStr("Press SET to set", NORMAL);
	
	date_y = year;
	date_m = month;
	date_d = day;
	writei2ctime(time_s, time_m, time_h, 0, date_d, date_m, date_y);
	init_crand();
      }
      screenmutex--;
    }
    if ((just_pressed & 0x4) || (pressed & 0x4)) {
      just_pressed = 0;

      screenmutex++;

      if (mode == SET_MONTH) {
	month++;
	if (month >= 13)
	  month = 1;
	if(month == 2) {
	  if(leapyear(year) && (day > 29))
	  	day = 29;
	  else if (!leapyear(year) && (day > 28))
	  	day = 28;
	} else if ((month == 4) || (month == 6) || (month == 9) || (month == 11)) {
      if(day > 30)
      	day = 30;
	}
	print_date(month,day,year,mode);
	
      }
      if (mode == SET_DAY) {
	day++;
	if (day > 31)
	  day = 1;
	if(month == 2) {
	  if(leapyear(year) && (day > 29))
	  	day = 1;
	  else if (!leapyear(year) && (day > 28))
	  	day = 1;
	} else if ((month == 4) || (month == 6) || (month == 9) || (month == 11)) {
      if(day > 30)
      	day = 1;
	}
	print_date(month,day,year,mode);
      }
      if (mode == SET_YEAR) {
	year = (year+1) % 100;
	print_date(month,day,year,mode);
      }
      screenmutex--;

      if (pressed & 0x4)
	_delay_ms(200);  
    }
  }

}
Exemplo n.º 3
0
void set_date(void) {
  uint8_t mode = init_set_menu(3);
  uint8_t day, month, year;
    
  day = date_d;
  month = date_m;
  year = date_y;
  while (!check_timeout()) {
    
    if (just_pressed & 0x2) {
      just_pressed = 0;
      screenmutex++;

      if (mode == SET_DATE) {
	DEBUG(putstring("Set date month/day, depending on region"));
	// ok now its selected
	mode = next_mode_setdate[region];
	
      } else if (mode == SET_MONTH) {
	DEBUG(putstring("Set date day/year, depending on region"));
	mode = next_mode_setmonth[region];
      } else if (mode == SET_DAY) {
	DEBUG(putstring("Set date month/year, depending on region"));
	mode = next_mode_setday[region];
      } else {
	// done!
	DEBUG(putstring("done setting date"));
	mode = SET_DATE;
	
	//Update the DS1307 with set date.
	writei2ctime(time_s, time_m, time_h, 0, day, month, year);
	date_y = year;
	date_m = month;
	date_d = day;
	
      }
      //Print the instructions below
      print_monthday_help(mode);
      //Refresh the date.
      print_date(month,day,year,mode);
      screenmutex--;
    }
    if ((just_pressed & 0x4) || (pressed & 0x4)) {
      just_pressed = 0;

      screenmutex++;

      if (mode == SET_MONTH) {
      month++;
      }
      if (mode == SET_DAY) {
	day++;
      }
      if (mode == SET_YEAR) {
	year = (year+1) % 100;
      }
      add_month(&month, &day, year);
      print_date(month,day,year,mode);
      screenmutex--;

      if (pressed & 0x4)
	delay_ms(200);  
    }
  }

}