static int
xhci_pci_attach(device_t self)
{
struct xhci_softc *sc = device_get_softc(self);
int count, err, rid;
/* XXX check for 64-bit capability */
if (xhci_init(sc, self)) {
device_printf(self, "Could not initialize softc\n");
goto error;
}
pci_enable_busmaster(self);
rid = PCI_XHCI_CBMEM;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
goto error;
}
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0);
sc->sc_irq_rid = 0;
if (xhci_use_msi) {
count = pci_msi_count(self);
if (count >= 1) {
count = 1;
if (pci_alloc_msi(self, &count) == 0) {
if (bootverbose)
device_printf(self, "MSI enabled\n");
sc->sc_irq_rid = 1;
}
}
}
sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ,
&sc->sc_irq_rid, RF_SHAREABLE | RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(self, "Could not allocate IRQ\n");
/* goto error; FALLTHROUGH - use polling */
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (sc->sc_bus.bdev == NULL) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
sprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self));
if (sc->sc_irq_res != NULL) {
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
if (err != 0) {
device_printf(self, "Could not setup IRQ, err=%d\n", err);
sc->sc_intr_hdl = NULL;
}
}
if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL ||
xhci_use_polling() != 0) {
device_printf(self, "Interrupt polling at %dHz\n", hz);
USB_BUS_LOCK(&sc->sc_bus);
xhci_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
}
/* On Intel chipsets reroute ports from EHCI to XHCI controller. */
switch (pci_get_devid(self)) {
case 0x9c318086: /* Panther Point */
case 0x1e318086: /* Panther Point */
case 0x8c318086: /* Lynx Point */
sc->sc_port_route = &xhci_pci_port_route;
sc->sc_imod_default = XHCI_IMOD_DEFAULT_LP;
break;
default:
break;
}
xhci_pci_take_controller(self);
err = xhci_halt_controller(sc);
if (err == 0)
err = xhci_start_controller(sc);
if (err == 0)
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err) {
device_printf(self, "XHCI halt/start/probe failed err=%d\n", err);
goto error;
}
return (0);
error:
xhci_pci_detach(self);
return (ENXIO);
}
static int
xhci_pci_attach(device_t self)
{
struct xhci_softc *sc = device_get_softc(self);
int count, err, rid;
uint8_t usedma32;
rid = PCI_XHCI_CBMEM;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
return (ENOMEM);
}
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
/* check for USB 3.0 controllers which don't support 64-bit DMA */
switch (pci_get_devid(self)) {
case 0x01941033: /* NEC uPD720200 USB 3.0 controller */
case 0x00141912: /* NEC uPD720201 USB 3.0 controller */
case 0x78141022: /* AMD A10-7300, tested does not work w/64-bit DMA */
usedma32 = 1;
break;
default:
usedma32 = 0;
break;
}
if (xhci_init(sc, self, usedma32)) {
device_printf(self, "Could not initialize softc\n");
bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
sc->sc_io_res);
return (ENXIO);
}
pci_enable_busmaster(self);
usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_lock, 0);
rid = 0;
if (xhci_use_msi) {
count = pci_msi_count(self);
if (count >= 1) {
count = 1;
if (pci_alloc_msi(self, &rid, 1, count) == 0) {
if (bootverbose)
device_printf(self, "MSI enabled\n");
sc->sc_irq_rid = 1;
}
}
}
/*
* hw.usb.xhci.use_polling=1 to force polling.
*/
if (xhci_use_polling() == 0) {
sc->sc_irq_res = bus_alloc_resource_any(
self, SYS_RES_IRQ,
&sc->sc_irq_rid,
RF_SHAREABLE | RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
pci_release_msi(self);
device_printf(self, "Could not allocate IRQ\n");
/* goto error; FALLTHROUGH - use polling */
}
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (sc->sc_bus.bdev == NULL) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
ksprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self));
if (sc->sc_irq_res != NULL) {
err = bus_setup_intr(self, sc->sc_irq_res, INTR_MPSAFE,
(driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl, NULL);
if (err != 0) {
bus_release_resource(self, SYS_RES_IRQ,
rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
sc->sc_irq_res = NULL;
pci_release_msi(self);
device_printf(self, "Could not setup IRQ, err=%d\n", err);
sc->sc_intr_hdl = NULL;
}
}
if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL) {
if (xhci_use_polling() != 0) {
device_printf(self, "Interrupt polling at %dHz\n", hz);
USB_BUS_LOCK(&sc->sc_bus);
xhci_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
} else
goto error;
}
/* On Intel chipsets reroute ports from EHCI to XHCI controller. */
switch (pci_get_devid(self)) {
case 0x0f358086: /* BayTrail */
case 0x9c318086: /* Panther Point */
case 0x1e318086: /* Panther Point */
case 0x8c318086: /* Lynx Point */
case 0x8cb18086: /* Wildcat Point */
case 0x9cb18086: /* Wildcat Point-LP */
sc->sc_port_route = &xhci_pci_port_route;
sc->sc_imod_default = XHCI_IMOD_DEFAULT_LP;
break;
default:
break;
}
xhci_pci_take_controller(self);
err = xhci_halt_controller(sc);
if (err == 0)
err = xhci_start_controller(sc);
if (err == 0)
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err) {
device_printf(self, "XHCI halt/start/probe failed err=%d\n", err);
goto error;
}
return (0);
error:
xhci_pci_detach(self);
return (ENXIO);
}
static int
xhci_pci_attach(device_t self)
{
struct xhci_softc *sc = device_get_softc(self);
int count, err, rid;
uint8_t usedma32;
rid = PCI_XHCI_CBMEM;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
return (ENOMEM);
}
sc->sc_io_tag = rman_get_bustag(sc->sc_io_res);
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
switch (pci_get_devid(self)) {
case 0x01941033: /* NEC uPD720200 USB 3.0 controller */
/* Don't use 64-bit DMA on these controllers. */
usedma32 = 1;
break;
case 0x0f358086: /* BayTrail */
case 0x9c318086: /* Panther Point */
case 0x1e318086: /* Panther Point */
case 0x8c318086: /* Lynx Point */
case 0x8cb18086: /* Wildcat Point */
/*
* On Intel chipsets, reroute ports from EHCI to XHCI
* controller and use a different IMOD value.
*/
sc->sc_port_route = &xhci_pci_port_route;
sc->sc_imod_default = XHCI_IMOD_DEFAULT_LP;
/* FALLTHROUGH */
default:
usedma32 = 0;
break;
}
if (xhci_init(sc, self, usedma32)) {
device_printf(self, "Could not initialize softc\n");
bus_release_resource(self, SYS_RES_MEMORY, PCI_XHCI_CBMEM,
sc->sc_io_res);
return (ENXIO);
}
pci_enable_busmaster(self);
usb_callout_init_mtx(&sc->sc_callout, &sc->sc_bus.bus_mtx, 0);
rid = 0;
if (xhci_use_msi) {
count = 1;
if (pci_alloc_msi(self, &count) == 0) {
if (bootverbose)
device_printf(self, "MSI enabled\n");
rid = 1;
}
}
sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_ACTIVE | (rid != 0 ? 0 : RF_SHAREABLE));
if (sc->sc_irq_res == NULL) {
pci_release_msi(self);
device_printf(self, "Could not allocate IRQ\n");
/* goto error; FALLTHROUGH - use polling */
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (sc->sc_bus.bdev == NULL) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
sprintf(sc->sc_vendor, "0x%04x", pci_get_vendor(self));
if (sc->sc_irq_res != NULL) {
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)xhci_interrupt, sc, &sc->sc_intr_hdl);
if (err != 0) {
bus_release_resource(self, SYS_RES_IRQ,
rman_get_rid(sc->sc_irq_res), sc->sc_irq_res);
sc->sc_irq_res = NULL;
pci_release_msi(self);
device_printf(self, "Could not setup IRQ, err=%d\n", err);
sc->sc_intr_hdl = NULL;
}
}
if (sc->sc_irq_res == NULL || sc->sc_intr_hdl == NULL) {
if (xhci_use_polling() != 0) {
device_printf(self, "Interrupt polling at %dHz\n", hz);
USB_BUS_LOCK(&sc->sc_bus);
xhci_interrupt_poll(sc);
USB_BUS_UNLOCK(&sc->sc_bus);
} else
goto error;
}
xhci_pci_take_controller(self);
err = xhci_halt_controller(sc);
if (err == 0)
err = xhci_start_controller(sc);
if (err == 0)
err = device_probe_and_attach(sc->sc_bus.bdev);
if (err) {
device_printf(self, "XHCI halt/start/probe failed err=%d\n", err);
goto error;
}
return (0);
error:
xhci_pci_detach(self);
return (ENXIO);
}
